aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* layerscape: add SD card boot supportYangbo Lu2018-09-225-1/+67
| | | | | | | | | NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add armv7 subtarget and ls1021atwr board supportYangbo Lu2018-09-222-1/+17
| | | | | | | | | | | | | | | | | | The NXP TWR-LS1021A module is a development system based on the QorIQ LS1021A processor. - This feature-rich, high-performance processor module can be used standalone or as part of an assembled Tower System development platform. - Incorporating dual Arm Cortex-A7 cores running up to 1 GHz, the TWR-LS1021A delivers an outstanding level of performance. - The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as well as a complete Linux software developer's package. - The module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection in both standby and active power modes, safeguarding the device from manufacture to deployment. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add u-boot environment support for OpenWrt bootYangbo Lu2018-09-228-1/+70
| | | | | | | This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK-18.06Yangbo Lu2018-09-222-49/+71
| | | | | | | | | | | | | | The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: drop uboot-layerscape patchesYangbo Lu2018-09-226-320/+0
| | | | | | | | Dropped uboot-layerscape patches which were environemnt patches. We will make u-boot environment binaries with a txt file for all devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* sunxi: build image/uboot for the NanoPi NEO2Jasper Scholte2018-09-221-0/+9
| | | | | | | | The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
* uboot-zynq: use a file to modify the default environmentLuis Araneda2018-09-102-0/+3
| | | | | | | | | Follow the strategy of other targets and create a default environment file, uEnv.txt, to configure the behavior of U-Boot. For now, use it to pass bootargs to the kernel Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: copy U-Boot images to STAGING_DIRLuis Araneda2018-09-101-0/+9
| | | | | | | | | | | Create a directory inside STAGING_DIR and copy U-Boot output images, so they can be used later when creating the sdcard image Additionally, like others targets, override the default install method to avoid copying the images to bin directory Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: automatically select the appropriate variantLuis Araneda2018-09-101-0/+5
| | | | | | | | Select the U-Boot variant automatically based on the current selected device, and hide the package from menuconfig Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: remove ZC706 boardLuis Araneda2018-09-101-4/+0
| | | | | | | The board was added when creating the target, but the corresponding device was never defined inside the target Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxiFelix Fietkau2018-09-051-0/+2
| | | | | | Fixes build with the default profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: fall back to MMC for SPL if boot mode is invalidFelix Fietkau2018-09-031-0/+26
| | | | | | Fixes boot on Hummingboard Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: remove obsolete patchFelix Fietkau2018-09-031-87/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: install images into STAGING_DIR_IMAGEFelix Fietkau2018-09-031-0/+7
| | | | | | Will be used by a new combined image for cubox Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: Initial support for SolidRun CuBox-i devices based on i.MX6 processors ↵Vladimir Vid2018-08-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (i1, i2, i2eX, and i4Pro). - Specifications - CuBox i1: - SoC: i.MX6 Solo - Cores: 1 - Memory Size: 512MB - GPU: GC880 - Wifi/Bluetooth: Optional - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps CuBox i2 | i2eX: - SoC: i.MX6 Dual Lite - Cores: 2 - Memory Size: 1GB - GPU: GC2000 - Wifi/Bluetooth: Optional - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps CuBox i4Pro | i4x4: - SoC: i.MX6 Quad - Cores: 4 - Memory Size: 2/4 GB - GPU: GC2000 - Wifi/Bluetooth: Build In - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps Built-in u-boot requires SPL (secondary program loader) to be present on the SD-card regardless of the image type which will be loaded. SPL is generated by the u-boot-mx6cuboxi package which is preselected by the target device and can be found in bin/u-boot-mx6cuboxi directory. Flashing the SPL: dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=4 dd if=bin/targets/imx6/generic/u-boot-mx6cuboxi/SPL of=/dev/mmcblk0 bs=1K seek=1 Preparing the firmware on the SD-card: (echo o; echo n; echo p; echo 1; echo ''; echo ''; echo w) | fdisk /dev/mmcblk0 mkfs.ext4 /dev/mmcblk0p1 mount /dev/mmcblk0p1 /mnt tar -xzf bin/targets/imx6/generic/openwrt-imx6-device-cubox-i-rootfs.tar.gz -C /mnt/ mkdir -p /mnt/boot cp bin/targets/imx6/generic/{*-uImage,*.dtb,*.scr} /mnt/boot/ Generated u-boot.img needs to be placed on the first partition: cp bin/targets/imx6/generic/u-boot-mx6cuboxi/u-boot.img /mnt/ To boot from the SD card: Boot script which sets mmc/dtb parameters and boots the board is automatically sourced. If this does not work for any reason: mmc dev 0; load mmc 0:1 $scriptaddr boot/boot.scr; source $scriptaddr Currently imx6dl-cubox-i.dtb (Dual Lite) and imx6q-cubox-i.dtb (Quad) device trees are available. Tested on i4Pro, MMC, USB (+ HiD), HDMI and ethernet ports are working. Wireless and bluetooth are broken ATM. According to SolidRun forums, BCM4329/BCM4330 firmware is used which works fine on older kernels. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* uboot-zynq: add support for the zybo z7 boardLuis Araneda2018-08-254-6/+612
| | | | | | | | Backport board support from the upcoming v2018.09 release, and add an additional patch to read the MAC address from flash memory Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* grub2: rebase patchesJo-Philipp Wich2018-08-231-8/+4
| | | | | | | | | Patch 300-CVE-2015-8370.patch was added without proper rebasing on the version used by OpenWrt, make it apply and refresh the patch to fix compilation. Fixes: 7e73e9128f ("grub2: Fix CVE-2015-8370") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* grub2: Fix CVE-2015-8370Rosen Penev2018-08-232-1/+45
| | | | | | | | | | | This CVE is a culmination of multiple integer overflow issues that cause multiple issues like Denial of Service and authentication bypass. More info: https://nvd.nist.gov/vuln/detail/CVE-2015-8370 Taken from Fedora. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* yamonenv: Remove dead URLsRosen Penev2018-08-221-2/+1
| | | | | | uscan errors on the URL as it is no longer available. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* fconfig: Remove dead URLsRosen Penev2018-08-221-2/+1
| | | | | | uscan errors on the URL as it is no longer available. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* apex: Remove dead URL.Rosen Penev2018-08-221-2/+1
| | | | | | | | uscan errors on the URL as it is no longer available. Also switched the download URL to HTTPS. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* uboot-zynq: update to 2018.07Luis Araneda2018-08-133-3/+46
| | | | Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ath79: add support for OCEDO KoalaDavid Bauer2018-08-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>
* sunxi: Added support for Xunlong Orange Pi PC2Antonio Silverio2018-08-091-0/+9
| | | | | | | | | | | | | | | | CPU: H5 High Performance Quad-core 64-bit Cortex-A53 GPU: Mali450 OpenGL ES 2.0/1.1/1.0, OpenVG 1.1, EGL Memory: 1GB DDR3 (shared with GPU) Onboard Storage: TF card (Max. 32GB) / NOR flash(2MB) Onboard Network: 1000M/100M Ethernet RJ45 USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG, HOST mode role by default in DTS Buttons: Power Button(SW4) Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI.. Signed-off-by: Antonio Silverio <menion@gmail.com>
* uboot-envtools: add ath79 targetDavid Bauer2018-08-081-0/+26
| | | | | | | | This adds uci entries for all ath79 devices for which this already was the case on ar71xx. Additionally we add the OCEDO Koala as there was no support in OpenWRT yet. Signed-off-by: David Bauer <mail@david-bauer.net>
* kirkwood: add support for Iomega Storcenter ix2-200Ademar Arvati Filho2018-07-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1000Mhz - Flash-Chip: Hynix NAND - Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16 - RAM: 256MB - LAN: 1x 1000 Mbps Ethernet - WiFi: none - 3x USB 2.0 - UART: for serial console Installation instructions - easy steps: 1. download factory.bin and copy into tftp server 2. access uboot environment with serial cable and run ``` setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.13 tftpboot 0x00800000 factory.bin nand erase 0x100000 $(filesize) nand write 0x00800000 0x100000 $(filesize) run bootcmd ``` 3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13) Installation steps nand bad blocks proof: 1. download initramfs-uImage and copy into usb ext2 partition ``` mkfs.ext2 -L ext2 /dev/sdh1 mount -t ext2 /dev/sdh1 /mnt cp initramfs-uImage /mnt/initramfs.bin umount /mnt ``` 2. access uboot environment with serial cable and run ``` setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000 ``` 3. log into openwrt and sysupgrade to install into flash ``` sysupgrade -n /tmp/sysupgrade.bin ``` 4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13) Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
* omap: rename image for sysupgrade compatibilityLucian Cristian2018-07-301-5/+5
| | | | | | for sysupgrade to work we need to change the image name based on dts target name Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* uboot-envtools: add configuration for Traverse LS1043 boards.Mathew McBride2018-07-301-0/+25
| | | | Signed-off-by: Mathew McBride <matt@traverse.com.au>
* grub2: fix packed-not-aligned error on GCC 8Edi Turn2018-07-301-0/+71
| | | | | | Fix the compile error "packed-not-aligned" when using GCC 8. Signed-off-by: Edi Turn <yyxstter@gmail.com>
* uboot-imx: bump to 2018.03 which fixes the build issues with fdt64_t ↵Vladimir Vid2018-07-079-1636/+26
| | | | | | | | | | | redefinitions * change mx6qsabresd to mx6qsabres to match defconfig name * merge wanboard profiles since there is only one defconfig for the target device * move wanboard options from wandboard.h to defconfig * remove legacy patches Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* uboot-kirkwood: fix malformed boot configurationAlberto Bursi2018-06-278-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With current uboot default configuration the bootloader will fail to start the OpenWrt firmware with the following error: ----- unexpected character 'b' at the end of partition Error initializing mtdparts! incorrect device type in ubi Partition ubi not found! Error, no UBI device/partition selected! Wrong Image Format for bootm command Error occured, error code = 112 ----- If the uboot configuration is examined with printenv I can see that mdtparts line (on a nsa310) is wrong: ----- mtdparts=mtdparts=orion_nand:0x0c0000(uboot), 0x80000(uboot_env),0x7ec0000(ubi)bootargs_root= ---- The "bootargs_root=" that was appended to it should not be there. Fix the issue by adding a \0 line terminator at the end of affected lines, mimicking what is also done by uboot upstream. This issue was detected and confirmed on a nsa310, nsa325 and a pogoplug v4, but it's not hardware-specific, so apply the same fix to other devices as well. Note that the issue is with the uboot's integrated boot configuration, which is not used unless the uboot configuration in flash is unavailable (erased or corrupted), which happens only on first time installation, or if the user deletes the uboot configuration when upgrading uboot. People just upgrading from an older uboot without erasing their previous uboot configuration stored in flash would not have noticed this issue. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-kirkwood: fix whitespacesAlberto Bursi2018-06-278-29/+29
| | | | | | remove whitespaces from the patches Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ipq40xx: add support for the ZyXEL NBG6617Christian Lamparter2018-06-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ZyXEL NBG6617 Hardware highlights: SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz NOR: 32 MiB Macronix MX25L25635F ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN) USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button, WIFI/Rfkill Togglebutton, WPS Button LEDS: Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS Serial: WARNING: The serial port needs a TTL/RS-232 3.3v level converter! The Serial setting is 115200-8-N-1. The 1x4 .1" header comes pre-soldered. Pinout: 1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX first install / debricking / restore stock: 0. Have a PC running a tftp-server @ 192.168.1.99/24 1. connect the PC to any LAN-Ports 2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file into the tftp-server root directory and rename it to just "ras.bin". 3. power-cycle the router and hold down the the WPS button (for 30sek) 4. Wait (for a long time - the serial console provides some progress reports. The u-boot says it best: "Please be patient". 5. Once the power LED starts to flashes slowly and the USB + WPS LEDs flashes fast at the same time. You have to reboot the device and it should then come right up. Installation via Web-UI: 0. Connect a PC to the powered-on router. It will assign your PC a IP-address via DHCP 1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234) 2. Go to the "Expert Mode" 3. Under "Maintenance", select "Firmware-Upgrade" 4. Upload the OpenWRT factory image 5. Wait for the Device to finish. It will reboot into OpenWRT without any additional actions needed. To open the ZyXEL NBG6617: 0. remove the four rubber feet glued on the backside 1. remove the four philips screws and pry open the top cover (by applying force between the plastic top housing from the backside/lan-port side) Access the real u-boot shell: ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02" When the device is starting up, the user can enter the the loader shell by simply pressing a key within the 3 seconds once the following string appears on the serial console: | Hit any key to stop autoboot: 3 The user is then dropped to a locked shell. |NBG6617> HELP |ATEN x[,y] set BootExtension Debug Flag (y=password) |ATSE x show the seed of password generator |ATSH dump manufacturer related data in ROM |ATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations) |ATGO boot up whole system |ATUR x upgrade RAS image (filename) |NBG6617> In order to escape/unlock a password challenge has to be passed. Note: the value is dynamic! you have to calculate your own! First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env) to get the challange value/seed. |NBG6617> ATSE NBG6617 |012345678901 This seed/value can be converted to the password with the help of this bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors): - tool.sh - ror32() { echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) } v="0x$1" a="0x${v:2:6}" b=$(( $a + 0x10F0A563)) c=$(( 0x${v:12:14} & 7 )) p=$(( $(ror32 $b $c) ^ $a )) printf "ATEN 1,%X\n" $p - end of tool.sh - |# bash ./tool.sh 012345678901 | |ATEN 1,879C711 copy and paste the result into the shell to unlock zloader. |NBG6617> ATEN 1,0046B0017430 If the entered code was correct the shell will change to use the ATGU command to enter the real u-boot shell. |NBG6617> ATGU |NBG6617# Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-oxnas: fix typo accidentally committed during oxnas rebootDaniel Golle2018-06-181-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-sunxi: update Orange Pi R1 and Zero PlusHauke Mehrtens2018-06-183-98/+257
| | | | | | | The device tree files are now matching the kernel 4.17 and this will be send also for integration into mainline U-Boot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: update to version 2018.05Hauke Mehrtens2018-06-1814-199/+39
| | | | | | | | | | This patch 220-add-sunxi50i-nanopi-neo-plus2.patch was merged upstream. The u-boot-sunxi-with-spl.bin is now also created for the ARM64 sunxi boards by U-Boot itself, no need to do it manually any more. This was tested on a H2+ Orange Pi R1 and a H5 Orange Pi Zero Plus. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-sunxi: update to version from 2018-02-10Hauke Mehrtens2018-06-181-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: add support for OCEDO KoalaDavid Bauer2018-06-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-zynq: update to 2017.03Luis Araneda2018-06-072-5/+5
| | | | | | Compile-tested: ZedBoard Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* oxnas: bring in new oxnas targetDaniel Golle2018-06-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-oxnas: fix build with newer GCCDaniel Golle2018-06-012-0/+593
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-zynq: fix build on hosts lacking pkg-configJo-Philipp Wich2018-05-231-0/+3
| | | | | | | | | | | | The uboot-mvebu package incorrectly used the host pkg-config for the tool build parts, which broke the build on systems lacking pkg-config and only worked by accident on those that have it installed. Export the host-build specific environment variables for the uboot build to redirect pkg-config invocations to our staged host build pkg-config in buildroot. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-mxs: fix build on hosts lacking pkg-configJo-Philipp Wich2018-05-231-0/+3
| | | | | | | | | | | | The uboot-mvebu package incorrectly used the host pkg-config for the tool build parts, which broke the build on systems lacking pkg-config and only worked by accident on those that have it installed. Export the host-build specific environment variables for the uboot build to redirect pkg-config invocations to our staged host build pkg-config in buildroot. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-mvebu: fix build on hosts lacking pkg-configJo-Philipp Wich2018-05-231-0/+3
| | | | | | | | | | | | The uboot-mvebu package incorrectly used the host pkg-config for the tool build parts, which broke the build on systems lacking pkg-config and only worked by accident on those that have it installed. Export the host-build specific environment variables for the uboot build to redirect pkg-config invocations to our staged host build pkg-config in buildroot. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mvebu: add support for WRT32X (venom)Michael Gray2018-05-141-1/+2
| | | | | | | | | | | | | | | | | | Linksys WRT32X (Venom) is identical in hardware to the WRT3200ACM with a different flash layout and boots zImage rather than uImage. Specification: - Marvell Armada 385 88F6820 (2x 1.8GHz) - 256MB of Flash - 512MB of RAM - 2.4GHz (bgn) and 5GHz (an+ac wave 2) - 4x 1Gbps LAN + 1x 1Gbps WAN - 1x USB 3.0 and 1x USB 2.0/eSATA (combo port) Flash instruction: Apply factory image via web-gui. Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
* at91: Add SAMA5D2 PTC EK boardSandeep Sheriker Mallikarjun2018-05-052-3/+31
| | | | | | | Add target device as at91-sama5d2_ptc_ek in SAMA5D2 subtarget and build images for SAMA5D2 PTC Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: reorganize at91 subtargetsSandeep Sheriker Mallikarjun2018-05-052-10/+20
| | | | | | | | | | | reorganizing at91 subtargets based on sama5 soc features and this fix below problems. 1. able to set neon flags to sama5d2 & sama5d4 subtargets. 2. fix the make clean which removes all the subtargets in bin folder. 3. able to configure kernel specific to subtarget. 4. able to set vfpu4 flags to samad3 subtargets. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: fix DTC command not found.Sandeep Sheriker Mallikarjun2018-05-051-0/+2
| | | | | | | fixed DTC command not found error while compling uboot-at91. The fix is to set DTC PATH in uboot-at91 MAKE command. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: Add SAMA5D27 SOM1 EK boardSandeep Sheriker Mallikarjun2018-05-052-2/+33
| | | | | | | Add support for SAMA5D27 SOM1 with target device as at91-sama5d27_som1_ek in SAMA5 subtarget and build images for SAMA5D27 SOM1 Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: fetch uboot src from u-boot-at91 githubSandeep Sheriker Mallikarjun2018-05-051-6/+11
| | | | | | | fetching uboot src from linux4sam/u-boot-at91 github for all at91 target. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 23:57:46 +0000