aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* uboot-oxnas: fix typo accidentally committed during oxnas rebootDaniel Golle2018-06-181-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-sunxi: update Orange Pi R1 and Zero PlusHauke Mehrtens2018-06-183-98/+257
| | | | | | | The device tree files are now matching the kernel 4.17 and this will be send also for integration into mainline U-Boot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: update to version 2018.05Hauke Mehrtens2018-06-1814-199/+39
| | | | | | | | | | This patch 220-add-sunxi50i-nanopi-neo-plus2.patch was merged upstream. The u-boot-sunxi-with-spl.bin is now also created for the ARM64 sunxi boards by U-Boot itself, no need to do it manually any more. This was tested on a H2+ Orange Pi R1 and a H5 Orange Pi Zero Plus. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-sunxi: update to version from 2018-02-10Hauke Mehrtens2018-06-181-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: add support for OCEDO KoalaDavid Bauer2018-06-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-zynq: update to 2017.03Luis Araneda2018-06-072-5/+5
| | | | | | Compile-tested: ZedBoard Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* oxnas: bring in new oxnas targetDaniel Golle2018-06-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-oxnas: fix build with newer GCCDaniel Golle2018-06-012-0/+593
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-zynq: fix build on hosts lacking pkg-configJo-Philipp Wich2018-05-231-0/+3
| | | | | | | | | | | | The uboot-mvebu package incorrectly used the host pkg-config for the tool build parts, which broke the build on systems lacking pkg-config and only worked by accident on those that have it installed. Export the host-build specific environment variables for the uboot build to redirect pkg-config invocations to our staged host build pkg-config in buildroot. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-mxs: fix build on hosts lacking pkg-configJo-Philipp Wich2018-05-231-0/+3
| | | | | | | | | | | | The uboot-mvebu package incorrectly used the host pkg-config for the tool build parts, which broke the build on systems lacking pkg-config and only worked by accident on those that have it installed. Export the host-build specific environment variables for the uboot build to redirect pkg-config invocations to our staged host build pkg-config in buildroot. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-mvebu: fix build on hosts lacking pkg-configJo-Philipp Wich2018-05-231-0/+3
| | | | | | | | | | | | The uboot-mvebu package incorrectly used the host pkg-config for the tool build parts, which broke the build on systems lacking pkg-config and only worked by accident on those that have it installed. Export the host-build specific environment variables for the uboot build to redirect pkg-config invocations to our staged host build pkg-config in buildroot. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mvebu: add support for WRT32X (venom)Michael Gray2018-05-141-1/+2
| | | | | | | | | | | | | | | | | | Linksys WRT32X (Venom) is identical in hardware to the WRT3200ACM with a different flash layout and boots zImage rather than uImage. Specification: - Marvell Armada 385 88F6820 (2x 1.8GHz) - 256MB of Flash - 512MB of RAM - 2.4GHz (bgn) and 5GHz (an+ac wave 2) - 4x 1Gbps LAN + 1x 1Gbps WAN - 1x USB 3.0 and 1x USB 2.0/eSATA (combo port) Flash instruction: Apply factory image via web-gui. Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
* at91: Add SAMA5D2 PTC EK boardSandeep Sheriker Mallikarjun2018-05-052-3/+31
| | | | | | | Add target device as at91-sama5d2_ptc_ek in SAMA5D2 subtarget and build images for SAMA5D2 PTC Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: reorganize at91 subtargetsSandeep Sheriker Mallikarjun2018-05-052-10/+20
| | | | | | | | | | | reorganizing at91 subtargets based on sama5 soc features and this fix below problems. 1. able to set neon flags to sama5d2 & sama5d4 subtargets. 2. fix the make clean which removes all the subtargets in bin folder. 3. able to configure kernel specific to subtarget. 4. able to set vfpu4 flags to samad3 subtargets. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: fix DTC command not found.Sandeep Sheriker Mallikarjun2018-05-051-0/+2
| | | | | | | fixed DTC command not found error while compling uboot-at91. The fix is to set DTC PATH in uboot-at91 MAKE command. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: Add SAMA5D27 SOM1 EK boardSandeep Sheriker Mallikarjun2018-05-052-2/+33
| | | | | | | Add support for SAMA5D27 SOM1 with target device as at91-sama5d27_som1_ek in SAMA5 subtarget and build images for SAMA5D27 SOM1 Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: fetch uboot src from u-boot-at91 githubSandeep Sheriker Mallikarjun2018-05-051-6/+11
| | | | | | | fetching uboot src from linux4sam/u-boot-at91 github for all at91 target. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91bootstrap:update to v3.8.10Sandeep Sheriker Mallikarjun2018-05-052-3/+3
| | | | | | updating to new version v3.8.10 and copying at91bootstrap.bin to bin folder. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-envtools: Change download to git.Rosen Penev2018-05-021-6/+7
| | | | | | | | Currently, the build system uses an openwrt mirror which does not currently work and FTP can be unreliable under several circumstances. This change implicitly allows using all the mirrors to download. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* uboot-mvebu: Fix build with libressl 2.7.2Hauke Mehrtens2018-04-291-0/+14
| | | | | | | When libressl was linked the libpthread was missing, add it in addition. Fixes: 2c192b69163f ("tools/libressl: update to version 2.7.2") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mxs: Fix build with libressl 2.7.2Hauke Mehrtens2018-04-292-16/+31
| | | | | | | | | When libressl was linked the libpthread was missing, add it in addition. Also make the mxsimage tool to use the OpenSSL 1.1 API for the recent libressl version. Fixes: 2c192b69163f ("tools/libressl: update to version 2.7.2") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-zynq: Fix build with libressl 2.7.2Hauke Mehrtens2018-04-291-0/+14
| | | | | | | When libressl was linked the libpthread was missing, add it in addition. Fixes: 2c192b69163f ("tools/libressl: update to version 2.7.2") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: add support for ESPRESSObin and MACCHIATObinDamir Samardzic2018-04-251-0/+4
| | | | | | | | Added for convenience. These boards can be used as dev boards running various operating systems from different media, and this simplifies work with U-Boot environment. Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
* ipq40xx: add support for OpenMesh A62Sven Eckelmann2018-04-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * QCA IPQ4019 * 256 MB of RAM * 32 MB of SPI NOR flash (s25fl256s1) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 * 2T2R 5 GHz (channel 36-64) - QCA9888 hw2.0 (PCI) - requires special BDF in QCA9888/hw2.0/board-2.bin bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 * 2T2R 5 GHz (channel 100-165) - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 * multi-color LED (controlled via red/green/blue GPIOs) * 1x button (reset; kmod-input-gpio-keys compatible) * external watchdog - triggered GPIO * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio3: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + 802.3at POE+ - phy@mdio4: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 18-24V passive POE (mode B) * powered only via POE The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. The initramfs image can be started using setenv bootargs 'loglevel=8 earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(0:custom),64k(0:KEYS),15552k(inactive),15552k(inactive2)' tftpboot 0x84000000 openwrt-ipq40xx-openmesh_a62-initramfs-fit-uImage.itb set fdt_high 0x85000000 bootm 0x84000000 Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* uboot-envtools: remove makefile duplication for supported targetsFelix Fietkau2018-04-201-47/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: update to 2018.03Luis Araneda2018-04-186-234/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several changes has been made: + AES support has been removed by upstream commit c6831c7 (2017-11-14) [remove patch "200-fw_env_no_aes.patch"] + Support for UBI volumes has beed added by upstream commit 34255b9 (2017-11-15) [remove patch "300-support-env-in-ubivol-chardev.patch"] + A command line argument has beed added ("-c") to manually indicate the location of the environment configuration file Also, patch "400-u-boot-2015.10-stdint.patch" is no longer necessary, and the config option to enable UBI support has been removed. Size comparisons: fw_printenv size: Target Before After ar71xx 15,189 bytes 18,133 bytes (+2,944 bytes) ipq40xx 20,873 bytes 20,987 bytes (+114 bytes) mvebu 20,881 bytes 20,991 bytes (+110 bytes) ramips 15,128 bytes 18,072 bytes (+2,944 bytes) OPKG package size: Target Before After ar71xx 11,309 bytes 12,875 bytes (+1,566 bytes) ipq40xx 11,772 bytes 13,299 bytes (+1,527 bytes) mvebu 11,609 bytes 13,114 bytes (+1,505 bytes) ramips 10,975 bytes 12,503 bytes (+1,528 bytes) Compile tested: ipq40xx (musl, glibc, gcc5-musl), ar71xx, mvebu, ramips Run tested: ipq40xx (ASUS RT-AC58U) Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* packages/uboot-omap: bugfix: serial using ns16550 fifo not enabledAlexander Couzens2018-04-112-1/+310
| | | | | | | | The serial was working before, but not when doing copy&pasting longer commands in a short time. Fixes: a4def18f29e1 ("uboot-omap: Update to u-boot v2017.01") Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: add U-Boot env support for ALFA Network AC1200RMPiotr Dymacz2018-04-061-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: fix ALFA Network AWUSFREE1 supportPiotr Dymacz2018-04-061-7/+9
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* u-boot-mvebu: update to 2018.03Josua Mayer2018-03-313-136/+2
| | | | | | | | | This release brings various improvements to clearfog support, such as distro-boot. Obsoletes: 0002-clearfog-reset-usom-onboard-1512-phy.patch 0003-clearfog-enable-distro-boot-code.patch Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* u-boot-mvebu: set configuration options in MakefileJosua Mayer2018-03-313-52/+8
| | | | | | | | | | | CONFIG_* variables can easily be set by overriding Build/Configure. so set NET_RANDOM_ETHADDR=y and CMD_SETEXPR=y here. This replaces the following patches: 0001-clearfog-generate-random-MAC-address.patch 0004-clearfog-enable-setexpr-command-by-default.patch Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* sunxi: add build for sopineFan Fan2018-03-231-0/+10
| | | | | | This will generate image for Pine64 Sopine board. Signed-off-by: Fan Fan <fkpwolf@gmail.com>
* uboot-sunxi: refresh patchesZoltan HERPAI2018-03-217-12/+12
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: fix build by adding comparabilities for old dtcHauke Mehrtens2018-03-211-0/+52
| | | | | | | | | We use the dtc from the kernel and that does not have all the options which u-boot would like to use now. make these parameters optional. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [wigyori@uid0.hu: renamed to 221-compatible-old-dtc.patch from 220-] Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: bump again to 2017.11Zoltan HERPAI2018-03-2111-392/+36
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-kirkwood: update to 2018.03Paul Wassi2018-03-2010-218/+120
| | | | | | | | | | | U-Boot now requires GCC > 5 Catch up with upstream and move some configuration options from the header files to the corresponding defconfig files. Also move some options of patch 010 affecting the whole platform to 010's device only. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-mxs: fix compile problems related to OpenSSLHauke Mehrtens2018-03-172-1/+36
| | | | | | | | | | | | | | Use the UBOOT_MAKE_FLAGS defined in include/u-boot.mk and do not overwrite them to compile the host tools against the shipped LibreSSL. In addition add a patch to fix a compile problem when compiling the tools against LibreSSL caused by differences in the API between OpenSSL 1.1 and LibreSSL. This should fix the compile problems seen in build bot from time to time by not depending on the host libssl-dev package any more but using the LibreSSL version from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mxs: refresh patchesHauke Mehrtens2018-03-171-26/+0
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: add targetJohn Crispin2018-03-144-5/+48
| | | | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: John Crispin <john@phrozen.org>
* uboot-imx6: fix build with GCC 7Hauke Mehrtens2018-03-134-5/+1344
| | | | | | | | Backport the compiler support patches from upstream u-boot to this older version to make it compile with GCC 7. This was found by build bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-fritz4040: fix build with gcc7Felix Fietkau2018-03-121-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: Add subtarget for Cortex A9 buildHauke Mehrtens2018-03-101-0/+1
| | | | | | This is in preparation for adding a subtarget for the Cortex A53 later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: add support for Turris OmniaRyan Mounce2018-03-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the Turris Omnia and builds an eMMC sysupgrade image in the same format as the SolidRun ClearFog. An initramfs image in the simple yet Omnia-specific 'medkit' image format is also built in order to ease the initial flashing process. Notable hardware support omissions are support for switching between SFP cage and copper PHY, and RGB LED control. Due to a current limitation of DSA, only 1/2 CPU switch uplinks are used. Specifications: - Marvell Armada 385 1.6GHz dual-core ARMv7 CPU - 1GB DDR3 RAM - 8GB eMMC Flash - 5x Gigabit LAN via Marvell 88E6176 Switch (2x RGMII CPU ports) - 1x switchable RJ45 (88E1514 PHY) / SFP SGMII WAN - 2x USB 3.0 - 12x dimmable RGB LEDs controlled by independent MCU - 3x Mini PCIe slots - Optional Compex WLE200N2 Mini PCIe AR9287 2x2 802.11b/g/n (2.4GHz) - Optional Compex WLE900VX Mini PCIe QCA9880 3x3 802.11ac (2.4 / 5GHz) - Optional Quectel EC20 Mini PCIe LTE modem Flash instructions: If the U-Boot environment has been modified previously (likely manually via serial console), first use serial to reset the default environment. => env default -a => saveenv Method 1 - USB 'medkit' image w/o serial - Copy openwrt-mvebu-turris-omnia-sysupgrade.img.gz and omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz to the root of a USB flash drive formatted with FAT32 / ext2/3/4 / btrfs / XFS. Note that the medkit MUST be named omnia-medkit*.tar.gz - Disconnect other USB devices from the Omnia and connect the flash drive to either USB port. - Power on the Omnia and hold down the rear reset button until 4 LEDs are illuminated, then release. - Wait approximately 2 minutes for the Turris Omnia to flash itself with the temporary image, during which LEDs will change multiple times. - Connect a computer to a LAN port of the Turris Omnia with a DHCP client - (if necessary) ssh-keygen -R 192.168.1.1 - ssh root@192.168.1.1 $ mount /dev/sda1 /mnt $ sysupgrade /mnt/openwrt-mvebu-turris-omnia-sysupgrade.img.gz - Wait another minute for the final OpenWrt image to be flashed. The Turris Omnia will reboot itself and you can remove the flash drive. Method 2 - TFTP w/ serial - Extract omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz and copy dtb + zImage to your TFTP server (rename if desired) - Connect Turris Omnia WAN port to DHCP-enabled network with TFTP server - Connect serial console and interrupt U-Boot => dhcp => setenv serverip <tftp_server_ip_here> => tftpboot 0x01000000 zImage => tftpboot 0x02000000 dtb => bootz 0x01000000 - 0x02000000 - OpenWrt will now boot from ramdisk - Download openwrt-mvebu-turris-omnia-sysupgrade.img.gz to /tmp/ $ sysupgrade /tmp/openwrt-mvebu-turris-omnia-sysupgrade.img.gz - Wait another minute for the final OpenWrt image to be flashed. The Turris Omnia will reboot itself. Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* uboot-sunxi: add Xunlong Orange Pi PCVitalij Alshevsky2018-02-261-0/+7
| | | | Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
* uboot-envtools: add support for ALFA Network AWUSFREE1Piotr Dymacz2018-02-221-6/+7
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for YunCore T830Piotr Dymacz2018-02-221-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for Samsung WAM250Piotr Dymacz2018-02-221-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for WHQX E1700AC/E600G/E600GAC v2Piotr Dymacz2018-02-221-0/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* grub2: disable building platform code for target utilityFelix Fietkau2018-02-221-1/+2
| | | | | | It is not used and it was causing a build error with GCC 7.3 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: rename gphy firmwareMathias Kresin2018-02-201-5/+5
| | | | | | | | | | Rename the gphy firmware to match the name requested by kernel 4.14 and update the devicetree source files to use the new name. Update the u-boot lantiq Makefile to be compatible with the new names as well. Signed-off-by: Mathias Kresin <dev@kresin.me>