aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* Add Zyxel P-2812HNU-Fx imagesJohn Crispin2014-04-221-1/+16
| | | | | | | | P-2812HNU-Fx images are already supported but not generated. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40548 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add Fritz!Box 3370 imagesJohn Crispin2014-04-221-1/+22
| | | | | | | | Fritz!Box 3370 images are already supported but not generated. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Refresh patchesJohn Crispin2014-04-2240-908/+98
| | | | | | | | Refresh uboot-lantiq patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40546 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Create firmware directory if it doesn't existJohn Crispin2014-04-221-0/+1
| | | | | | | | Fixes package refreshing. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40545 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Depend on lantiq boardJohn Crispin2014-04-221-2/+30
| | | | | | | | | | Depend on lantiq board. ARV7510 depends on ARV4510 because (according to OpenWrt wiki) both boards are identical except for the unsupported WiFi. Moreover, ARV7510 isn't especifically supported and ARV4510 images valid. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kobs-ng: Add support for overriding sizeLuka Perkov2014-04-192-2/+44
| | | | | | | | | | | | | | | | By default kobs-ng will use the size of /dev/mtd0 for the IMX bootstreams. This patch allows overriding that size in order to reserve space at the end of the mtd partition for u-boot.img in the case of using an SPL bootloader. For example, to flash an SPL bootloader that loads u-boot.img from 0xe0000 (14MB) offset in a 16MB /dev/mtd0: kobs-ng init -v -x --search_exponent=1 --chip_0_size=0xe00000 SPL nandwrite --start=0xe00000 --pad /dev/mtd0 u-boot.img Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: remove uboot lzma patch, apparently its not needed after allJohn Crispin2014-04-161-44/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40521 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: backport lzma fixJohn Crispin2014-04-161-0/+44
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40520 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-envtools: add support for the ZyXEL NBG6716 boardGabor Juhos2014-04-131-0/+3
| | | | | | | | Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40501 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: enable parallel buildingJohn Crispin2014-04-121-0/+2
| | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40488 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiqJohn Crispin2014-04-121-0/+15
| | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40487 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: add packages for AudioCodes MP-252John Crispin2014-04-121-0/+12
| | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40486 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: add packages for various Arcadyan boardsJohn Crispin2014-04-121-2/+63
| | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40485 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: add packages for Lantiq EASY80920John Crispin2014-04-121-1/+26
| | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40484 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: add packages for Lantiq EASY50712John Crispin2014-04-121-1/+19
| | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40483 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-lantiq: update to v2013.10John Crispin2014-04-1260-3103/+8333
| | | | | | | | | | Patches created from tree: git@github.com:danielschwierzeck/u-boot-lantiq.git v2013.10..u-boot-lantiq-v2013.10-openwrt4 Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40482 3c298f89-4303-0410-b956-a3cf2f4a3e73
* grub2: disable mkfont - fix build on ArchlinuxFelix Fietkau2014-03-301-1/+2
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40350 3c298f89-4303-0410-b956-a3cf2f4a3e73
* grub2: disable libdevmapper - fix build when it's availableFelix Fietkau2014-03-301-1/+2
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-envtools: fix build with muslFelix Fietkau2014-03-201-0/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39961 3c298f89-4303-0410-b956-a3cf2f4a3e73
* grub2: update to 2.02-beta2, fixes mac os x 10.9 support (and many other things)Felix Fietkau2014-03-124-80/+100
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39889 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-sunxi: bump u-boot versionZoltan HERPAI2014-03-056-242/+10786
| | | | | | | | | | | | - update u-boot to 2014.01-rc1 - smp support on a20 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39779 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kexec-tools: disable lzma supportHauke Mehrtens2014-02-211-1/+2
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39652 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-envtools: pass target cflagsNicolas Thill2014-02-182-1/+14
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39629 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] uboot-kirkwood: add support for Seagate GoFlexNetLuka Perkov2014-02-161-0/+5
| | | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39594 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] uboot-kirkwood: update to 2013.10Luka Perkov2014-02-156-27/+439
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested on: * Cloud Engines Pogoplug E02 * RaidSonic ICY BOX IB-NAS62x0 * Iomega Iconnect Some users are avoiding to replace their bootloader, because of that add support for second stage u-boot image. Having ubifs capable bootloader is required in order to boot current OpenWrt trunk. Sample ib62x0 commands for running second stage bootloader: tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img bootm 0x800000 Sample ib62x0 commands for flashing second stage bootloader: tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize} nand read 0x800000 0x100000 0x100000 ; bootm 0x800000 While at it include parallel build support, use alphabetic order of the boards and introduce common OpenWrt configuration. Signed-off-by: Luka Perkov <luka@openwrt.org> Tested-by (on ib62x0): Luka Perkov <luka@openwrt.org> Tested-by (on dockstar): Alexander Couzens <lynxis@fe80.eu> Tested-by (on iconnect): Wojciech Dubowik <wojciech.dubowik@neratec.com> CC: Felix Kaechele <heffer@fedoraproject.org> CC: Wojciech Dubowik <wojciech.dubowik@neratec.com> CC: Alexander Couzens <lynxis@fe80.eu> CC: Daniel Engberg <daniel.engberg@pyret.net> CC: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39590 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-sunxi: various fixesZoltan HERPAI2014-02-053-0/+166
| | | | | | | | | | | - update A10-Lime support - fix MMC on sun5i with initializing PLL6 correctly Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* sunxi: boot changesZoltan HERPAI2014-01-312-2/+9
| | | | | | | | | | | | | - Added uEnv.txt to facilitate automatic boot. - Cosmetic fix in u-boot Makefile - Don't force command line arguments Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39438 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] uboot-envtools: add support for wndr3700Luka Perkov2014-01-242-4/+5
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39380 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kexec: bump to latest head revisionJohn Crispin2014-01-171-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39305 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [packages] uboot-sunxi: - add support for CubietruckZoltan HERPAI2014-01-121-5/+9
| | | | | | | | | | - cosmetic change: have the options listed alphabetically Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39261 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [packages] uboot-sunxi: add support for Olinuxino A10 LIMEZoltan HERPAI2014-01-112-3/+68
| | | | | | | | | Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39221 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add x86_64 target supportImre Kaloz2014-01-071-2/+2
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39208 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uboot-sunxi]: add support for pcDuino boardZoltan HERPAI2014-01-041-1/+5
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39192 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uboot-sunxi]: update versionZoltan HERPAI2014-01-041-1/+1
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39191 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uboot-omap]: fix jffs2 with internal libgcc and switch omap4 to ext4Imre Kaloz2013-12-132-0/+45
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39044 3c298f89-4303-0410-b956-a3cf2f4a3e73
* FPU type should not interfere with the ABI selection.Imre Kaloz2013-11-292-2/+2
| | | | | | | | | | Also make sure we either do real soft-float or hard-float on ARM, with the right options. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38943 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uboot-omap]: hide package, it's needed all the timeImre Kaloz2013-11-261-0/+1
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38924 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uboot-omap]: use plain image names inside the target directoriesImre Kaloz2013-11-261-2/+2
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38923 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package: uboot-mxs: cosmetic fixZoltan HERPAI2013-11-201-1/+1
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38875 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package]: uboot-sunxi: add U-boot builds for a couple sunxi boardsZoltan HERPAI2013-11-131-0/+107
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38785 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mxs: - update uboot-mxs to 3.10Zoltan HERPAI2013-11-121-1/+1
| | | | | | | | | | | - enable building uboot for imx23 along sbImage by default - (doc updated) Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38781 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-envtools: add support for mxs targetZoltan HERPAI2013-11-122-0/+30
| | | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38776 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mxs: rename uboot-imx23 to uboot-mxsZoltan HERPAI2013-11-121-3/+3
| | | | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38774 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [omap]: rename the omap4 target to omapImre Kaloz2013-11-081-5/+5
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38691 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [u-boot/omap]: use a single package to build MLO/u-boot for all omap boardsImre Kaloz2013-10-313-426/+27
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38626 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] uboot-imx6: update to 2013.10Luka Perkov2013-10-312-18/+13
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* uboot-ar71xx: make it depend on the generic ar71xx subtargetGabor Juhos2013-10-301-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38599 3c298f89-4303-0410-b956-a3cf2f4a3e73
* u-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow ↵Felix Fietkau2013-10-289-9/+28
| | | | | | | | and unreliable Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38559 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] uboot-envtools: update to 2013.10Luka Perkov2013-10-183-145/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38444 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [package] uboot-envtools: update kirkwood scriptsLuka Perkov2013-10-142-13/+10
| | | | | | | | Also, scripts can be installed as data so let's change that here too. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38403 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 06:20:08 +0000