aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-fritz4040
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: add support for AVM FRITZ!Repeater 1200David Bauer2019-11-221-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ4019 RAM: 256M DDR3 FLASH: 128M NAND WiFi: 2T2R IPQ4019 bgn 2T2R IPQ4019 a/n/ac ETH: Atheros AR8033 RGMII PHY BTN: 1x Connect (WPS) LED: Power (green/red/yellow) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz1200' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ1200.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz1200.bin uboot0 > mtd write /path/to/uboot-fritz1200.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 7f187229a8e9b7966248b1e024217e07a9fc3e50) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* uboot-fritz4040: update to latest HEADDavid Bauer2019-11-221-3/+3
| | | | | | | | | | f92be9d add support for AVM FRITZ!Repeater 1200 d651302 enable support for Atheros AR8033 PHY e4c857c add machtype override hack Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 36f43b61a74ff12d75989d0aabe052945aacc8cf) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* uboot-fritz4040: build with ipq40xx "generic" subtargetYousong Zhou2019-11-031-0/+1
| | | | | | | Fixes: 853e4dd3 ("ipqx0xx: add Generic subtarget") Ref: https://forum.openwrt.org/t/ipq40xx-snapshot-not-updated-since-22nd-august/44126 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (cherry picked from commit 40e3f660c1c0f400092cce09feb8c13bec97caeb)
* uboot-fritz4040: update to 2019-09-07David Bauer2019-09-251-3/+3
| | | | | | | | | | | | | | 572ff7f fritzcreator: actually add checksum spacer 6edce1a fritzcreator: replace obscure padding generation with something more portable 2ff189f add ASUS RT-AC58U "easy install" factory u-boot shim b91f9c2 readd spi-nand support 486ae53 improve cmd_sysupgrade b0933f1 replace sstrip with strip 882e48a do not include generated files into git 0c5aa5f fix bugs in ipq40xx_cdp.c Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit af63436d2d0dc3c07d1cb11b018e486994942c6c)
* uboot-fritz4040: Add host flags for host compilerHauke Mehrtens2019-05-191-2/+2
| | | | | | | | | | | | | This adds the host staging directory to the include path to make it use the zlib.h files from the staging include directory and also link against the zlib version from the staging directory. This fixes a compile problem when the zlib header were not installed on the build host. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [picked from openwrt-18.06]
* uboot-fritz4040: fix PKG_MIRROR_HASHChristian Lamparter2019-03-211-1/+1
| | | | | | | The PKG_MIRROR_HASH was for some reason wrong. Fixes: d75db67870fa ("uboot-fritz4040: bump version to 2019-03-03") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for AVM FRITZ!Repeater 3000David Bauer2019-03-131-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M (NANYA NT5CC128M16JR-EK) FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI) ETH: Qualcomm QCA8072 WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac WiFi5: QCA9984 4T4R 4SS n/ac LED: - Connect green/blue/red - Power green BTN: WPS/Connect UART: 115200n8 3.3V VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz3000' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ3000.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz3000.bin uboot0 > mtd write /path/to/uboot-fritz3000.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-fritz4040: bump version to 2019-03-03David Bauer2019-03-131-3/+3
| | | | | | Adds support for the AVM FRITZ!Repeater 3000 Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: add support for FritzBox 7530David Bauer2019-02-281-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M FLASH: 128M NAND ETH: QCA8075 VDSL: Intel/Lantiq VRX518 PCIe attached currently not supported DECT: Dialog SC14448 currently not supported WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac LED: - Power/DSL green - WLAN green - FON/DECT green - Connect/WPS green - Info green - Info red BTN: - WLAN - FON - WPS/Connect UART: 115200n8 3.3V (located under the Dialog chip) VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz7530' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz7530.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ7530.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz7530.bin uboot0 > mtd write /path/to/uboot-fritz7530.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> [removed pcie-dts range node, refreshed on top of AP120-AC/E2600AC] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-fritz4040: bump version to 2019-02-08David Bauer2019-02-281-5/+6
| | | | | | | Adds support for the AVM FRITZ!Box 7530. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [PKG_RELEASE]
* uboot-fritz4040: update package to 2019-01-25Christian Lamparter2019-01-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | David Bauer reported a u-boot crash (data abort) at a odd place (byteswap) when he ran ping/tftp on his 7530. |(FRITZ7530) # ping 192.168.1.70 |eth0 PHY0 up Speed :1000 Full duplex |eth0 PHY1 Down Speed :10 Half duplex |eth0 PHY2 Down Speed :10 Half duplex |eth0 PHY3 Down Speed :10 Half duplex |eth0 PHY4 Down Speed :10 Half duplex |Using eth0 device |data abort |pc : [<84234774>] lr : [<842351a4>] |sp : 8412fdb0 ip : 0000009b fp : 00000000 |r10: 00000000 r9 : 00000001 r8 : 8412ff68 |r7 : 00000000 r6 : 0000002a r5 : 84244e90 r4 : 8425e28e |r3 : 84244e90 r2 : 14000045 r1 : 8412fdb0 r0 : 8425e28e |Flags: nZCv IRQs off FIQs off Mode SVC_32 |Resetting CPU ... | |resetting ... This issue is caused by switch from gcc 5.5 to 7.1+ as explained in the upstream patch: |From a768e513b07b5999a8e7d7740ac8d9da04ee7e51 Mon Sep 17 00:00:00 2001 |From: Denis Pynkin <denis.pynkin@collabora.com> |Date: Fri, 21 Jul 2017 19:28:42 +0300 |Subject: [PATCH] net: Use packed structures for networking | |PXE boot is broken with GCC 7.1 due option '-fstore-merging' enabled |by default for '-O2': | |BOOTP broadcast 1 |data abort |pc : [<8ff8bb30>] lr : [<00004f1f>] |reloc pc : [<17832b30>] lr : [<878abf1f>] |sp : 8f558bc0 ip : 00000000 fp : 8ffef5a4 |r10: 8ffed248 r9 : 8f558ee0 r8 : 8ffef594 |r7 : 0000000e r6 : 8ffed700 r5 : 00000000 r4 : 8ffed74e |r3 : 00060101 r2 : 8ffed230 r1 : 8ffed706 r0 : 00000ddd |Flags: nzcv IRQs off FIQs off Mode S | |Core reason is usage of structures for network headers without packed |attribute. Reported-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGEDavid Bauer2019-01-061-1/+7
| | | | | | | | | | | | Copy U-Boot to STAGING_DIR_IMAGE (and append it to the EVA-image from there) to fix image generation using the image-builder. Also remove the bootloader from DEVICE_PACKAGES and instead use the BUILD_DEVICES directive from within the U-Boot makefile. This fixes eva-image generation using the OpenWRT image-builder. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-fritz4040: update package to 2018-12-09Christian Lamparter2018-12-114-353/+5
| | | | | | | | | | | | | | | | | This patch updates the uboot-fritz4040 package to the latest version. The portability and private-libgcc patches, as well as the upload-to-f4040.sh script have been added to the upstream repository. Furthermore, the upload-to-f4040 has been updated to take the first parameter as the file it is supposed to flash, otherwise it defaults to the previous "uboot-fritz4040.bin". Furthermore the error messages have been improved and ftp will now dump some "progress information" to the user's console. Also included is support for gcc 8+ and a fix for the obnoxous error that currently breaks the builders: | fritz/src/lzma2eva.c:23:30: fatal error: zlib.h: No such file or directory Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add targetJohn Crispin2018-03-141-1/+1
| | | | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: John Crispin <john@phrozen.org>
* uboot-fritz4040: fix build with gcc7Felix Fietkau2018-03-121-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-fritz4040: Fix build with HOSTCFLAGSHauke Mehrtens2018-02-111-1/+1
| | | | | | | | | | | | When we provide the HOSTCFLAGS to the U-Boot build it will fail because it can not find the u-boot provided header files any more. Just overwrite and not append the package specific configuration on top of the configuration provided by u-boot.mk. uboot-fritz4040 is based on U-Boot 2012.07 and this problem is probably similar to the problem seen with the lantiq and ar71xx u-boot build. Fixes: df9781a4205 ("u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variable") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040Felix Fietkau2017-03-224-0/+401
Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 01:55:56 +0000