aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-envtools/files/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: update uboot-envtools for Netgear WNR routersMichal Cieslakiewicz2019-11-121-1/+10
| | | | | | | | Boards added: WNR1000v2, WNR2000v3, WNR2200, WNR612v2, WNDR4300. Boards changed: WNDR3700 (u-boot env size is 2 sectors not 1). Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> (cherry picked from commit 11052900494ec8216b9b39ba0b24d5e036f4d323)
* ar71xx: add support for OCEDO KoalaDavid Bauer2018-06-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit e36f8b3f3980903d5cefc51fe274c19c7a0719f2)
* uboot-envtools: add support for YunCore T830Piotr Dymacz2018-02-221-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for Samsung WAM250Piotr Dymacz2018-02-221-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for WHQX E1700AC/E600G/E600GAC v2Piotr Dymacz2018-02-221-0/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: Add eTactica EG-200 supportKarl Palsson2018-02-131-0/+1
| | | | | | | | | | | | | | EG-200 is a DIN rail mountable device with one ethernet port, wifi, an RS-485 port, and an internal USB attached uSD card reader. Two leds, "modbus" and "etactica" are managed by userspace applications in factory firmware. Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Karl Palsson <karlp@etactica.com>
* uboot-envtools: add support for GL.iNet GL-AR750Piotr Dymacz2018-01-151-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for ALFA Network R36APiotr Dymacz2018-01-151-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for ALFA Network N5QPiotr Dymacz2018-01-141-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for ALFA Network AP91-5GPiotr Dymacz2018-01-141-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for Wallys DR342Piotr Dymacz2017-11-141-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for Nokia WI2A-AC200iFelix Fietkau2017-10-191-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: add support for ALFA Network AP121FPiotr Dymacz2017-07-221-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* treewide: use the generic board_name functionMathias Kresin2017-07-151-2/+1
| | | | | | Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-envtools: add Arduino Yun supportCamille Bilodeau2017-06-291-0/+1
| | | | Signed-off-by: Camille Bilodeau <camille.bilodeau@protonmail.com>
* ar71xx: add support for EnGenius ENS202EXTMarty Plummer2017-05-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EnGenius ENS202EXT is an outdoor wireless access point with 2-port 10/100 switch, detachable antennas and proprietery PoE. The device is based on Qualcomm/Atheros AR9341 v1. Specifications: - 535/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM - 16 MB of FLASH - UART (J1) header on PCB (unpopulated) - 2x 10/100 Mbps Ethernet - 2.4 GHz, up to 26dBm - 2x external, detachable antennas - 7x LED, 1x button Flash instructions: You have three options: - Use the vendor firmware upgrade page on the web interface and give it the factory.img. This is the easiest way to go about it. - If you have serial access during u-boot, interrupt the normal boot (any key before timeout) and run 'run failsafe_boot'; this will bring you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've bricked the normal firmware. - Use the vendor's management cli, which can be accessed via telnet with the same credentials as the web login (default admin:admin), then issue the following commands: *** Hi admin, welcome to use cli(V-1.6.7) *** ---========= Commands Help =========--- stat -- Status sys -- System wless2 -- 2.4G-Wireless mgmt -- Management tree -- Tree help -- Help reboot -- Reboot ens202ext>mgmt Management ---========= Commands Help =========--- admin -- Administration mvlan -- Management VLAN settings snmp -- SNMP settings backup -- Backup/Restore settings autorb -- Auto reboot settings fwgrade -- Firmware upgrade time -- Time settings wifisch -- Wifi schedule log -- Log diag -- Diagnostics disc -- Device Discovery logout -- Logout help -- Help exit -- Exit ens202ext/mgmt>fwgrade Management --> Firmware upgrade ---========= Commands Help =========--- fwup -- Firmware upgrade help -- Help exit -- Exit ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
* uboot-envtools: add support for 8devices RambutanMantas Pucka2017-05-151-0/+4
| | | | Signed-off-by: Mantas Pucka <mantas@8devices.com>
* package/uboot-envtools: add OpenMesh A40 supportSven Eckelmann2017-02-141-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh a60 supportSven Eckelmann2017-02-141-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 supportSven Eckelmann2017-02-141-1/+3
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* uboot-envtools: fix code formatting style in uci-defaults filesPiotr Dymacz2016-12-201-37/+37
| | | | | | | | | | Few minor code formatting style fixes, including: - keep one board per line - always use "|\" (for consistency) - remove redundant double quotes and empty lines Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: keep boards in alphabetical orderPiotr Dymacz2016-12-201-7/+7
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for YunCore SR3200 and XD3200Piotr Dymacz2016-12-121-1/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for YunCore CPE830Piotr Dymacz2016-11-211-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for YunCore CPE870Piotr Dymacz2016-11-211-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for YunCore AP90QPiotr Dymacz2016-11-211-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for D-Link DAP-2695 rev. A1Stijn Tintel2016-10-271-0/+1
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* ar71xx: add support for gl-ar300mZhao Gang2016-07-201-0/+1
| | | | | | | This add initial support for gl-ar300m router. Product page: http://www.gl-inet.com/ar300m/ Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
* uboot-envtools: add support for jjPlus JWAP230Piotr Dymacz2016-07-131-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for Wallys DR531Piotr Dymacz2016-07-131-0/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* package/uboot-envtools: add OpenMesh MR1750v2 supportSven Eckelmann2016-05-231-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh OM2P-HSv3 supportSven Eckelmann2016-05-231-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* uboot-envtools: add OpenMesh OM5P-ACv2 supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49153
* uboot-envtools: add OpenMesh OM5P-AC supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49146
* uboot-envtools: add support for ap120cLuka Perkov2016-03-231-0/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49083
* ar71xx: PowerCloud CR5000 openwrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | OpenWrt configuration part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47946
* ar71xx: PowerCloud CR3000 OpenWrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | OpenWRt configuration part of support for the PowerCloud Systems CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast ethernet wan port that was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47945
* ar71xx: PowerCloud CAP324 OpenWrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | | | | Openwrt configuration part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems who's stock firmware (CloudCommand) provides 'cloud' based managment of large numbers access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a wall wart. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47944
* package/uboot-envtools: add OpenMesh MR1750 supportJohn Crispin2015-09-141-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46931
* package/uboot-envtools: add OpenMesh OM5P-AN supportJohn Crispin2015-03-171-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 44865
* package: uboot-envtools: add nbg6716 to appropriate groupLuka Perkov2015-02-071-3/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44308
* uboot-envtools: add carambola2 supportJohn Crispin2014-11-191-0/+1
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 43317
* package/uboot-envtools: add OpenMesh MR900v2 supportJohn Crispin2014-11-141-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43269
* package/uboot-envtools: add OpenMesh MR900 supportJohn Crispin2014-11-141-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43263
* ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.John Crispin2014-10-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | Qihoo C301 has 2 flash chips of which one is used as primary and the other is used as backup. OEM U-Boot will try to boot an activeregion N with imageNstatus=0 and imageNtrynum <= imagemaxtry. If such a region is found, bootloader will try to increment imageNtrynum and boot it. This patch tries to reset imageNtrynum after each successful boot (if the boot process reaches the execution of /etc/init.d/done). root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9 00000000 9e f3 63 91 61 63 74 69 76 65 72 65 67 69 6f 6e |..c.activeregion| 00000010 3d 31 00 69 6d 61 67 65 31 73 74 61 74 75 73 3d |=1.image1status=| 00000020 30 00 69 6d 61 67 65 32 73 74 61 74 75 73 3d 30 |0.image2status=0| 00000030 00 69 6d 61 67 65 32 74 72 79 6e 75 6d 3d 30 00 |.image2trynum=0.| 00000040 69 6d 61 67 65 6d 61 78 74 72 79 3d 33 00 69 6d |imagemaxtry=3.im| 00000050 61 67 65 31 74 72 79 6e 75 6d 3d 30 00 00 00 00 |age1trynum=0....| 00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 42914
* package/uboot-envtools: add OpenMesh OM5P supportJohn Crispin2014-07-201-0/+1
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 41774
* package/uboot-envtools: add support for the EnGenius EAP300 v2 boardGabor Juhos2014-07-141-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41660
* package/uboot-envtools: add support for the Tube2H boardGabor Juhos2014-07-141-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41651
* package/uboot-envtools: add OpenMesh OM2P-HSv2 supportJohn Crispin2014-06-021-0/+1
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40965
* package/uboot-envtools: add OpenMesh OM2Pv2 supportJohn Crispin2014-06-021-0/+1
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40959
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 06:39:05 +0000