aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-at91
Commit message (Collapse)AuthorAgeFilesLines
* at91: add support for sam9x60-ek boardClaudiu Beznea2021-10-241-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAM9X60-EK board. Hardware: - SoC: SAM9X60 - RAM: Winbond W972GG6KB-25 (2Gbit DDR2) - NAND Flash: Micron MT29F4G08ABAEA - QSPI Flash: Microchip SST26VF064B - EEPROM: Microchip 24AA02E48 - SDMMC: One standard 4-bit SD card interface - USB: two stacked Type-A connectors with power switches, one micro-B USB device - CAN: 2 interfaces (Microchip MCP2542) - Ethernet: one 10/100Mbps - WiFi/BT: one optional WiFi/Bluetooth interface - Audio: one ClassD port - Display: one 24-bit LCD interface - Camera: one 12-bit image sensor interface - IO: one IO expander (Microchip MCP23008) - Debug ports: one J-Link-OB + CDC, one JTAG interface - Leds: one RGB LED - Buttons: 4 push button switches - Expansion: one PIO connector, one mikrobus connector - Power management: two power regulators, two power consumption measurement devices Flashing: - follow the procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sam9x60EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d27-wlsom1-ek boardClaudiu Beznea2021-10-241-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D27 WLSOM1-EK board. Hardware: - SIP: SAMA5D27C-LD2G-CU including SAMA5D27 MPU and 2Gbit LPDDR2-SDRAM - MMC: one standard SD card interface - Flash: 64 Mb serial quad I/O flash memory (SST26VF064BEUIT-104I/MF) with embedded EUI-48 and EUI-64 MAC addresses - USB: one USB device, one USB host one HSIC interface - Ethernet: 1x10/100Mbps port - WiFi/BT: IEEE 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) module (ATWILC3000-MR110UA) - Crypto: one ATECC608B-TNGTLS secure element - Video: one LCD RGB 18-bit interface, one ISC 12-bit camera interface - Debug port: one JTAG interface, one UART interface, one WILC UART interface - Leds: one RGB LED - Buttons: start, reset, wakeup, user buttons - Expansion: one tamper connector, one mikrobus interface, 2 XPRO PTC connector - Power managament: PMIC (MCP16502) Flashing: - follow procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d27WLSom1EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d2 icp boardClaudiu Beznea2021-10-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D2 ICP board. Hardware: - SoC: SAMA5D27 - RAM: 512 MB DDR3L - MMC: One stanard SD card interface - USB: One USB host switch 4 ports with power switch, One USB device type Micro-AB - CAN: 2 interfaces - Ethernet: One Gigabit Ethernet PHY through HSIC, One ETH switchport, One EtherCAT interface - WiFi/BT: Footprint for IEEE 802.11 b/g/n Wi-Fi plus Bluetooth module (Wi-Fi/BT), suitable for Microchip WILC3000-MR110CA or WILC3000-MR110UA - Debug port: One J-Link-OB/J-Link-CDC, one JTAG interface - Leds: one RGB LED - Buttons: reset, wakeup, 2 user buttons - Expansion: one PIOBU/PIO connector, 3 mikrobus sockets - Power mangament: PMIC (MCP16502), one power consumption device (PAC1934) Not working in Linux: - EtherCAT interface: there is no Linux support integrated - PAC1934: driver available at [1] but not integrated in Linux Flashing: - follow the procedure at [2] [1] https://ww1.microchip.com/downloads/en/DeviceDoc/pac193x_linux_driver.zip [2] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* treewide: use AUTORELEASE on all uboot-* packagesAdrian Schmutzler2021-10-021-1/+1
| | | | | | | | Nobody ever updates PKG_RELEASE when changing devices or setup in the various uboot-* packages. Use $(AUTORELEASE) so we still have proper versioning there. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-at91: fix dtc compilation on host gcc 10Hauke Mehrtens2021-08-212-9/+49
| | | | | | Backport a patch from upstream U-Boot to fix the compile with host GCC 10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-at91: Add PKG_MIRROR_HASH to fix downloadHauke Mehrtens2021-01-181-0/+1
| | | | | | | | | | | The referenced commit is gone, but we already have this file on our mirror, use that one by providing the correct mirror hash. I generated a tar.xz file with the given git commit hash using a random fork on github and it generated the same tar.xz file as found on our mirror so this looks correct. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-at91: harmonize indent in MakefileAdrian Schmutzler2020-08-251-5/+5
| | | | | | The indent in Makefile is mixed, harmonize it where reasonable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: introduce vendor_model scheme and drop board namesAdrian Schmutzler2020-08-251-19/+19
| | | | | | | | | | | | | | This introduces the vendor_model scheme to this target in order to harmonize device names within the target and with the rest of OpenWrt. In addition, custom board names are dropped in favor of the generic script which takes the compatible. Use the SUPPORTED_DEVICES variable to store the compatible where it deviates from the device name, so we can use it in build recipes. While at it, harmonize a few indents as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-at91: bump version to linux4sam-2020.04Sandeep Sheriker M2020-08-252-6/+32
| | | | | | | Bump version to linux4sam-2020.04 and add patch to fix Wformat-security warnings. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: fix -Wformat-securitySandeep Sheriker M2019-08-172-1/+14
| | | | | | add patch to fix -Wformat-security warnings. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: changed som1 ek default defconfigsSandeep Sheriker M2019-08-171-5/+5
| | | | | | | replaced som1 ek spi flash with qspi defconfig and mmc with mmc1 defconfig. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: add at91sam9x5ek socSandeep Sheriker M2019-08-171-0/+9
| | | | | | add support to build u-boot binaries for at91sam9x5ek socs. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: bump linux4sam_5.8 to linux4sam_6.0Sandeep Sheriker M2019-08-171-2/+2
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91:renaming subtraget legacy to sam9xSandeep Sheriker M2019-05-301-2/+2
| | | | | | renaming subtraget legacy to sam9x for adding new sam9 soc's Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: Merge SAMA5 subtargetsHauke Mehrtens2019-05-301-11/+11
| | | | | | | | | Instead of maintaining 3 very similar subtargets merge them into one. This does not use the Arm NEON extension any more, because the SAMA5D3 does not support NEON. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
* at91: Add SAMA5D2 PTC EK boardSandeep Sheriker Mallikarjun2018-05-051-2/+16
| | | | | | | Add target device as at91-sama5d2_ptc_ek in SAMA5D2 subtarget and build images for SAMA5D2 PTC Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: reorganize at91 subtargetsSandeep Sheriker Mallikarjun2018-05-051-9/+9
| | | | | | | | | | | reorganizing at91 subtargets based on sama5 soc features and this fix below problems. 1. able to set neon flags to sama5d2 & sama5d4 subtargets. 2. fix the make clean which removes all the subtargets in bin folder. 3. able to configure kernel specific to subtarget. 4. able to set vfpu4 flags to samad3 subtargets. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: fix DTC command not found.Sandeep Sheriker Mallikarjun2018-05-051-0/+2
| | | | | | | fixed DTC command not found error while compling uboot-at91. The fix is to set DTC PATH in uboot-at91 MAKE command. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: Add SAMA5D27 SOM1 EK boardSandeep Sheriker Mallikarjun2018-05-051-1/+15
| | | | | | | Add support for SAMA5D27 SOM1 with target device as at91-sama5d27_som1_ek in SAMA5 subtarget and build images for SAMA5D27 SOM1 Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: fetch uboot src from u-boot-at91 githubSandeep Sheriker Mallikarjun2018-05-051-6/+11
| | | | | | | fetching uboot src from linux4sam/u-boot-at91 github for all at91 target. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: make packages hiddenHauke Mehrtens2018-01-091-0/+1
| | | | | | | | These packages are needed to generate the image, better mark them hidden so we will activate them based on which boards gets build and they will be activated always when the board which needs then gets build. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-at91: fix build after fpu activationSandeep Sheriker Mallikarjun2018-01-091-1/+1
| | | | | | | | | neon and VFPv4 support is added to this target and uboot-at91 build fails due to TARGET_CFLAGS -mfloat-abi set to hard. as a fix, setting uboot-at91 CFLAGS -mfloat-abi=soft. Fixes: 01cc6bd495f ("at91: sama5: activate fpu") Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: multiple build fixesHauke Mehrtens2017-10-141-21/+23
| | | | | | | | | | | This fixes the following problems: * Add BUILD_DEVICES for legacy subtarget * Use features from u-boot.mk for sama5 subtarget This is mainly done by changing the prefix from uboot to U-Boot. This makes them depend on the sama5 subtarget and not selectable for the legacy subtarget any more Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-at91: Add support for SAMA5D4 Xplained boardSandeep Sheriker Mallikarjun2017-09-201-2/+22
| | | | | | | Add support for SAMA5D4 Xplained board and options to select & build u-boot configs for different media storage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: Add support for SAMA5D2 Xplained boardSandeep Sheriker Mallikarjun2017-09-201-1/+16
| | | | | | | Add support for SAMA5D2 Xplained board and options to select & build u-boot configs for different media storage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: Add support for SAMA5D3 Xplained boardSandeep Sheriker Mallikarjun2017-09-201-1/+15
| | | | | | | Add support for SAMA5D3 Xplained board and options to select & build u-boot configs for different media storage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: move BUILD_SUBTARGET from U-Boot/Default to devicesSandeep Sheriker Mallikarjun2017-09-201-1/+2
| | | | | | | | currenlty U-Boot/Default supports only at91 legacy devices.To add sama5 support, moving BUILD_SUBTARGET from U-Boot/Default to target devices. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: switch to u-boot.mkFelix Fietkau2017-01-241-71/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: clean up download hashesFelix Fietkau2016-12-161-1/+1
| | | | | | Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* package: Add U-Boot for at91Ben Whitten2016-10-061-0/+102
Adds u-boot for the at91 platform and a couple of boards. The build honours COPTS to benefit from fortify source et al. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>