aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/at91bootstrap
Commit message (Collapse)AuthorAgeFilesLines
* at91bootstrap: update at91bootstrap v4 targets to v4.0.3Claudiu Beznea2022-07-311-3/+3
| | | | | | | Update AT91Bootstrap v4 capable targets to v4.0.3. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> (cherry picked from commit 859f5f9aec23c96ec3151175c349ffdbe6b108ef)
* at91: add support for sama7g5-ek boardClaudiu Beznea2022-02-241-1/+8
| | | | | | | | | | | | | | | | | | | | | | Add support for SAMA7G5-EK board. Hardware: - SoC: SAMA7G5 - RAM: Aliance Memory AS4C256M16D3LC (4 Gbit DDR3L) - SD/MMC: 1 standard 4bit SD Card interface - USB: 1 Micro-AB host/device, 1 Type-A host, 1 Type-C host - CAN: 2 interfaces - Ethernet: 10/100 port, 1Gbps port - Wi-Fi/BT: 1 optional interface - Audio: 1 SPDIF RX port, 1 SPDIF TX port, 4 digital microphones - Camera: 1 RPi CSI camera interface - Debug: 1 J-Link-OB + CDC, 1 JTAG - LEDs: 1 RGB - Buttons: 4 push buttons - Expansions: 1 RPi Expansion connector, 2 mikroBUS connectors - Power management: 1 power management IC, 1 power consumption measurement device Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91bootstrap: update to v3.10.4, v4.0.1Claudiu Beznea2022-02-243-42/+22
| | | | | | | | | | AT91Bootstrap version 4 is available only for SAM9X60, SAMA5D2, SAMA5D3, SAMA5D4, SAMA7G5. Thus use v4.0.1 for the above targets and v3.10.4 for the rest of them. With the switch to v4 AT91Bootstrap binaries are now on build/binaries. Take also this into account. Also, patches directory is not needed anymore with the version update. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sam9x60-ek boardClaudiu Beznea2021-10-241-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAM9X60-EK board. Hardware: - SoC: SAM9X60 - RAM: Winbond W972GG6KB-25 (2Gbit DDR2) - NAND Flash: Micron MT29F4G08ABAEA - QSPI Flash: Microchip SST26VF064B - EEPROM: Microchip 24AA02E48 - SDMMC: One standard 4-bit SD card interface - USB: two stacked Type-A connectors with power switches, one micro-B USB device - CAN: 2 interfaces (Microchip MCP2542) - Ethernet: one 10/100Mbps - WiFi/BT: one optional WiFi/Bluetooth interface - Audio: one ClassD port - Display: one 24-bit LCD interface - Camera: one 12-bit image sensor interface - IO: one IO expander (Microchip MCP23008) - Debug ports: one J-Link-OB + CDC, one JTAG interface - Leds: one RGB LED - Buttons: 4 push button switches - Expansion: one PIO connector, one mikrobus connector - Power management: two power regulators, two power consumption measurement devices Flashing: - follow the procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sam9x60EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d27-wlsom1-ek boardClaudiu Beznea2021-10-241-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D27 WLSOM1-EK board. Hardware: - SIP: SAMA5D27C-LD2G-CU including SAMA5D27 MPU and 2Gbit LPDDR2-SDRAM - MMC: one standard SD card interface - Flash: 64 Mb serial quad I/O flash memory (SST26VF064BEUIT-104I/MF) with embedded EUI-48 and EUI-64 MAC addresses - USB: one USB device, one USB host one HSIC interface - Ethernet: 1x10/100Mbps port - WiFi/BT: IEEE 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) module (ATWILC3000-MR110UA) - Crypto: one ATECC608B-TNGTLS secure element - Video: one LCD RGB 18-bit interface, one ISC 12-bit camera interface - Debug port: one JTAG interface, one UART interface, one WILC UART interface - Leds: one RGB LED - Buttons: start, reset, wakeup, user buttons - Expansion: one tamper connector, one mikrobus interface, 2 XPRO PTC connector - Power managament: PMIC (MCP16502) Flashing: - follow procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d27WLSom1EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d2 icp boardClaudiu Beznea2021-10-241-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D2 ICP board. Hardware: - SoC: SAMA5D27 - RAM: 512 MB DDR3L - MMC: One stanard SD card interface - USB: One USB host switch 4 ports with power switch, One USB device type Micro-AB - CAN: 2 interfaces - Ethernet: One Gigabit Ethernet PHY through HSIC, One ETH switchport, One EtherCAT interface - WiFi/BT: Footprint for IEEE 802.11 b/g/n Wi-Fi plus Bluetooth module (Wi-Fi/BT), suitable for Microchip WILC3000-MR110CA or WILC3000-MR110UA - Debug port: One J-Link-OB/J-Link-CDC, one JTAG interface - Leds: one RGB LED - Buttons: reset, wakeup, 2 user buttons - Expansion: one PIOBU/PIO connector, 3 mikrobus sockets - Power mangament: PMIC (MCP16502), one power consumption device (PAC1934) Not working in Linux: - EtherCAT interface: there is no Linux support integrated - PAC1934: driver available at [1] but not integrated in Linux Flashing: - follow the procedure at [2] [1] https://ww1.microchip.com/downloads/en/DeviceDoc/pac193x_linux_driver.zip [2] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91bootstrap: Fix compile with binutils 2.36Hauke Mehrtens2021-08-211-0/+38
| | | | | | | This fixes a build problem seen after binutils 2.36 is used by default. Fixes: 3f41153b1c28 ("toolchain/binutils: switch to version 2.36.1 by default") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91bootstrap: Add PKG_MIRROR_HASH to fix downloadHauke Mehrtens2021-01-181-0/+1
| | | | | | | | | | | The referenced commit is gone, but we already have this file on our mirror, use that one by providing the correct mirror hash. I generated a tar.xz file with the given git commit hash using a random fork on github and it generated the same tar.xz file as found on our mirror so this looks correct. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91bootstrap: harmonize indent in MakefilesAdrian Schmutzler2020-08-252-34/+34
| | | | | | The indent in Makefiles is mixed, harmonize it where reasonable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: introduce vendor_model scheme and drop board namesAdrian Schmutzler2020-08-251-16/+16
| | | | | | | | | | | | | | This introduces the vendor_model scheme to this target in order to harmonize device names within the target and with the rest of OpenWrt. In addition, custom board names are dropped in favor of the generic script which takes the compatible. Use the SUPPORTED_DEVICES variable to store the compatible where it deviates from the device name, so we can use it in build recipes. While at it, harmonize a few indents as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91bootstrap: bump version to v3.9.3Sandeep Sheriker M2020-08-251-2/+2
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfigSandeep Sheriker M2019-08-171-3/+3
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: add support for at91sam9x5ekSandeep Sheriker M2019-08-171-0/+14
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: bump v3.8.10 to v3.8.12Sandeep Sheriker M2019-08-171-3/+2
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: Merge SAMA5 subtargetsHauke Mehrtens2019-05-301-13/+13
| | | | | | | | | Instead of maintaining 3 very similar subtargets merge them into one. This does not use the Arm NEON extension any more, because the SAMA5D3 does not support NEON. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
* at91: Add SAMA5D2 PTC EK boardSandeep Sheriker Mallikarjun2018-05-051-1/+15
| | | | | | | Add target device as at91-sama5d2_ptc_ek in SAMA5D2 subtarget and build images for SAMA5D2 PTC Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: reorganize at91 subtargetsSandeep Sheriker Mallikarjun2018-05-051-1/+11
| | | | | | | | | | | reorganizing at91 subtargets based on sama5 soc features and this fix below problems. 1. able to set neon flags to sama5d2 & sama5d4 subtargets. 2. fix the make clean which removes all the subtargets in bin folder. 3. able to configure kernel specific to subtarget. 4. able to set vfpu4 flags to samad3 subtargets. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: Add SAMA5D27 SOM1 EK boardSandeep Sheriker Mallikarjun2018-05-051-1/+18
| | | | | | | Add support for SAMA5D27 SOM1 with target device as at91-sama5d27_som1_ek in SAMA5 subtarget and build images for SAMA5D27 SOM1 Ek board. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91bootstrap:update to v3.8.10Sandeep Sheriker Mallikarjun2018-05-052-3/+3
| | | | | | updating to new version v3.8.10 and copying at91bootstrap.bin to bin folder. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variableAlexandru Ardelean2018-02-101-1/+1
| | | | | | | | | | | | | | | | | This would should up as `$$(HOSTCPPFLAGS)` in the host CFLAGS. ``` make --jobserver-fds=3,4 -j -C <openwrt>/build_dir/target-arm_cortex-a8+vfpv3_musl_eabi/u-boot-A10-OLinuXino-Lime/u-boot-2017.07 CROSS_COMPILE=arm-openwrt-linux-muslgnueabi- DTC="<openwrt>/build_dir/target-arm_cortex-a8+vfpv3_musl_eabi/linux-sunxi_cortexa8/linux-4.9.76/scripts/dtc/dtc" HOSTCC="gcc" HOSTCFLAGS='-O2 -I<openwrt>/staging_dir/host/include -I<openwrt>/staging_dir/host/usr/include -I<openwrt>/staging_dir/hostpkg/include -I<openwrt>/staging_dir/target-arm_cortex-a8+vfpv3_musl_eabi/host/include $$(HOSTCPPFLAGS)' HOSTLDFLAGS="" BL31=<openwrt>/staging_dir/target-arm_cortex-a8+vfpv3_musl_eabi/image/bl31.bin ``` And then it would complain with: ``` /bin/sh: 1: HOSTCPPFLAGS: not found ``` Also, HOSTCPPFLAGS does not exist. The correct var is HOST_CPPFLAGS. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* at91bootstrap: make packages hiddenHauke Mehrtens2018-01-091-0/+1
| | | | | | | | These packages are needed to generate the image, better mark them hidden so we will activate them based on which boards gets build and they will be activated always when the board which needs then gets build. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91bootstrap: remove redundant definition of BUILD_SUBTARGETHauke Mehrtens2018-01-091-8/+0
| | | | | | | It is sufficient to define this in AT91Bootstrap/Default as this is not used for all. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91bootstrap: at91bootstrap default selectionSandeep Sheriker Mallikarjun2018-01-091-16/+16
| | | | | | | | | | | The fixes following problems 1. changing prefix at91bootstrap to AT91bootstrap will fix the default selection of at91bootstrap for the selected sama5 subtarget. 2. fixed missing default selection of sama5d4 nand flash for the selected sama5d4 subtarget. 3. corrected at91bootstrap Title name. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91bootstrap: remove manual copy of binaries to BIN_DIRSandeep Sheriker Mallikarjun2017-10-141-2/+10
| | | | | | | removed copying of binaries to BIN_DIR during install and using default/install to install binaries to BIN_DIR folder. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91bootstrap: Add BUILD_SUBTARGET variableSandeep Sheriker Mallikarjun2017-10-141-2/+3
| | | | | | | | | Added sama5 to BUILD_SUBTARGET variable.This will populate at91bootstrap menu options in bootloader menu only when SAMA5 devices are selected as SUBTARGET and to avoid showing up this menu when legacy device is selected as SUBTARGET and fixed typo mistake: sama5d3 -> sama5d2. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91bootstrap: New package at91bootstrapSandeep Sheriker Mallikarjun2017-09-202-0/+173
at91bootstrap is a second-level bootloader for Microchip(Atmel AT91) SoCs. It provides a set of algorithms to manage the hardware initialization and to download the main application or a third-level bootloader(i.e. uboot) from specified boot media to main memory and execute it. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 23:44:39 +0000