aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/arm-trusted-firmware-mvebu
Commit message (Collapse)AuthorAgeFilesLines
* treewide: replace AUTORELEASE with real PKG_RELEASETianling Shen2023-05-181-1/+1
| | | | | | | | | | | | | | | | | | Based on Paul Fertser <fercerpav@gmail.com>'s guidance: Change AUTORELEASE in rules.mk to: ``` AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile)) ``` then update all affected packages by: ``` for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';); do make package/$i/clean done ``` Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* arm-trusted-firmware-mvebu: Use host flags for cryptest compilationHauke Mehrtens2022-12-312-0/+15
| | | | | | | | | Without these changes it used the system LDFLAGS for the compilation of the cryptopp library. This does not always work when we add "-no-warn-rwx-segments" which is done to support binutils 2.39 inside of OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mvebu: add Methode eDPU supportRobert Marko2022-10-171-1/+12
| | | | | | | Provide ATF support for Methode eDPU as well, this makes it easy for OpenWrt users to update the included U-boot+ATF combo. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* arm-trusted-firmware-mvebu: stop cluttering Image BuilderTomasz Maciej Nowak2022-09-211-21/+20
| | | | | | | | | | | | | | All contents of staging_dir/image are included in Image Builder (IB) in case some binary needs to be included in final image. But in case of this package, all sources are stored there and those clutter the final tarball of IB for no reason. Those sources are not used during image creation and are just dead weight. To put it in perspective, the IB for 21.02.0 is 158 MiB, 22.03.0-rc6 is 366 MiB and snapshot is over 620 MiB! To fix it, put them in package build directory, so they won't end up included in IB tarball. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Reviewed-by: Andre Heider <a.heider@gmail.com>
* trusted-firmware-a.mk: pass DTC path similar to u-boot.mkDaniel Golle2022-08-281-0/+1
| | | | | | | | | Instead of relying on dtc being provided by the build host use the dtc from $(LINUX_DIR) similar to how it's done also in u-boot.mk. For this to work kernel.mk now needs to be included before trusted-firmware-a.mk, add this include to all affected packages. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mvebu: update cm3 gcc to 11.2Andre Heider2022-07-311-4/+4
| | | | | | https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update to v2.7Andre Heider2022-07-317-436/+23
| | | | | | | Remove the backported patches and add another to allow building with the OpenWrt build system. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump mox-boot-builder to v2022.06.11Andre Heider2022-07-312-15/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the gold patch, since upstream doesn't hardcode it anymore. 406454d wtmi: Don't print another newline on standalone build ec97868 Bump mox-imager commit e4c4b9d wtmi: Call main from C code in startup 4c1d3ff wtmi: Move startup assmebly to C file as inline assmebly ee570ea wtmi: Indent Makefiles 18a7c0b wtmi: Use -f{function,data}-sections and --gc-sections 47ad100 wtmi: Use bfd linker instead of gold 5e34aa1 wtmi: Keep .data* and .bss* sections in linker scripts 7a4e3d2 wtmi: compressed, reload_helper: Discard .ARM* section d943726 wtmi: compressed: Keep main function in linker script d4f0fc6 wtmi: Keep main function in linker script 092148c wtmi: Fix -Warray-bounds warning 469e1b6 wtmi: Add do_div() implementation from Linux 90f46a0 Bump mox-imager commit 8bc6254 wtmi: Always use gold and link with --rosegment and --gc-sections flags 0b68a33 wtmi: Implement Marvell's OTP write commands 53d2a1c Bump mox-imager commit b4c34b4 Rename arm-trusted-firmware to trusted-firmware-a 5f79ace Sync mox-imager submodule URL a1cdd32 Sync TF-A submodule URL 58ef1af Sync u-boot submodule URL 90d28e1 wtmi: Check argument validity in Marvell's CMD_OTP_READ_1B command more 3a48cf1 Bump mox-imager commit 807a3e1 wtmi: Implement Marvell's OTP read commands 77b1232 wtmi: Enable OTP read/write mailbox commands 9724d41 wtmi: Add is_secure_boot() 03de0c1 Bump mox-imager commit 2133601 wtmi: Fix efuse_write_row_with_ecc_lock() for masked ECC rows 545a89f wtmi: Don't allow masked rows in efuse_write_row_with_ecc_lock() 94ebc98 wtmi: Don't program already programmed bits in efuse_raw_write() 2369750 wtmi: Remove inline specifier from is_row_masked() 53e2636 wtmi: Use ARRAY_SIZE() cc3e23b wtmi: Remove duplicate checks 89d24be Makefile: ignore clean target errors 9ee8b8d Bump mox-imager commit 489262b Bump mox-imager commit 79d2f32 deploy: Print board type in deploy output 78f15b0 deploy: Print board version without board type bits in deploy output e69fdfa deploy: Always determine 512 MiB RAM when deploying RIPE Atlas Probe d1f7d07 deploy: Write eMMC Boot Mode into OTP when deploying RIPE Atlas Probe d43a089 Bump mox-imager commit 49ac21d deploy: Use get_ram_size() from ddr.c 1e7705d Print DDR type and size when initializing 6f85e72 Move get_ram_size() to ddr.c edb1079 wtmi: Rename Atlas_RIPE to RIPE_Atlas e6a3aee wtmi: Inform about board type in CMD_BOARD_INFO 50aeae5 wtmi: Read only bits 53:48 of row eFuse 42 as board version b882398 wtmi: Add README.md (document OTP content) c068431 wtmi: Add ARRAY_SIZE() macro 4af2317 wtmi: Use 50 MHz as SPI clock rate 226fc5c wtmi: Add fast spi_write() function 518c914 wtmi: clock: Check for zero loops, not argument, in ndelay() / udelay() 89a21c5 wtmi: Fix comment 7b3e11a wtmi: Add clk command to print xtal and TBG clock rates 5127638 wtmi: Use the signed keyword when defining signed types fb31ed2 wtmi: Fix DDR training failure check 1b1b938 wtmi: clock: Check for zero in ndelay() / udelay() c0ee09a wtmi: Print correct DDR version in debug message edfb875 Bump mox-imager commit 85cb5e3 Bump mox-imager commit c4e9334 wtmi: debug: interpret char 127 as backspace a778fd9 Bump mox-imager commit Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump mv-ddr-marvell to current versionAndre Heider2022-07-311-3/+3
| | | | | | | | | | 6ff988f mv_ddr: a3700: Use the right size for memset to not overflow 0f3e893 mv_ddr: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision 4bae770 mv_ddr: a38x: fix SPLIT_OUT_MIX state decision cdefd8b mv_ddr: a38x: Fix Synchronous vs Asynchronous mode determination 8c42ad9 mv_ddr_4_training: cast uint64_t to unsigned long long Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump a3700-utils to current versionAndre Heider2022-07-311-3/+3
| | | | | | | | | | | | | | | | | 1d97715 wtmi: Discard ELF symbols from firmware binary 2d2a21c wtmi: Allow access to the 43th OTP row e733e9f Fix boot from SATA build 4392eaf wtmi: Fix sending status code of cmd execution 14b3c61 Wtpdownloader: Remove out-of-dated x86-64 ELF binary WtpDownload_linux e345b95 Wtpdownloader: Fix setting tty c_cflag options 0c502d5 Wtpdownloader: Call HandlePendingMessages() after Port->WtpCmd is freed d91761a Wtpdownloader: Fix memory leaks bc11d18 Wtpdownloader: Check for number of read bytes prior touching read buffer 58db335 Wtpdownloader: Add missing check in SendContinuousForceConsoleMode() if byte was really read a4029c0 Wtpdownloader: Fix 32/64-bit host detection 3679034 Wtpdownloader: Print missing newline at the end of output Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump mv-ddr-marvell to current versionAndre Heider2021-11-271-3/+3
| | | | | | | | | | | efcad0e Merge pull request #33 from Semihalf/cn913x_cex7_eval 91bed2c cn913x: Add cn913x_cex7_eval config 55139f6 Merge pull request #32 from pali/master e5573cc ARM: mvebu: a38x: Correct mismatched bound warnings d83c38b a3700: Remove duplicate check for DDR_TYPE c0c6bf7 a3700: Put temporary a3700_ddr_type file into $(OBJ_DIR) Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump a3700-utils to current versionAndre Heider2021-11-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | With cryptocpp in place we can now update past the point of dropping the old tbb_linux binary and build it instead. Hauke confirmed that this also allows this firmware to be built on aarch64. 97f01f5 Wtpdownloader: Properly retrieve current tty options a33ff86 Wtpdownloader: Set CREAD tty cflag af461d2 Wtpdownloader: Fix stuck during opening UART tty device 38c2135 Makefile: Print error when specified CLOCKSPRESET is not valid f014428 TBB: Remove out-of-dated x86-64 ELF binary tbb_linux 1b6cb50 TBB: Fix compilation with Crypto++ 5.6.5 d9fb291 TBB: Fix memory corruptions by calling correct delete[] operator d575885 TBB: Fix initializing CCTIM object b9e1c4e Wtpdownloader: Fix makefile 8f61591 Wtpdownloader: Fix building with gcc 11 eabea5f TBB: Fix building with gcc 11 Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: add cryptoppJosef Schlehofer2021-11-272-20/+18
| | | | | | | | | | | | | | | Based on the Build Instructions for Trusted-Firmware-A [1], there is a required cryptopp [2]. In the past, it used 'tbb_linux' image tool binary, which seems to be buggy, deprecated and removed from A3700-utils-marvell and it should not be used anymore. That's why I removed 001-imagetool.patch, which is no longer necessary. [1] https://trustedfirmware-a.readthedocs.io/en/v2.5/plat/marvell/armada/build.html [2] https://cryptopp.com/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* arm-trusted-firmware-mvebu: fix commit ids to for mv-ddr-marvellKerma Gérald2021-11-271-0/+12
| | | | | | | | | | without this patch a3700-utils/tim/ddr/ddr_tool.verstr contains the OpenWrt commit ID. this patch fix the mv_ddr version commit ID by using the global variable MV_DDR_COMMIT_ID. Upon boot it now prints "mv_ddr-devel-g02e23dbc-d DDR4 16b 1GB 1CS". Cc: Andre Heider <a.heider@gmail.com> Signed-off-by: Kerma Gérald <gandalf@gk2.net>
* arm-trusted-firmware-mvebu: Add hash for aarch64 cm3-gccHauke Mehrtens2021-09-201-0/+4
| | | | | | | | This adds the hash also for the aarch64 toolchain in addition to the x86_64 toolchain. This gets the build on a Linux aarch64 host one step further. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mvebu: CZ.NIC's Secure Firmware bump to v2021.09.07sean lee2021-09-154-168/+2
| | | | | | | | | | | | | | | | | bump version and remove patches that have been applied 176d701 wtmi: Wait 1s after putting PHYs INTn pin low 2eeccfe wtmi: Change comment describing reset workaround e8c94a5 wtmi: Count RAM size from both CS0 and CS1 995979e wtmi: Rename macro e29eb29 wtmi: soc: Fix start_ap_workaround() for TF-A with debug 81245ed wtmi: Use constant name PLAT_MARVELL_MAILBOX_BASE 18ccb83 wtmi: Do a proper UART reset with clock change as described in spec 15ff106 avs: Validate VDD value from OTP 3f33626 fix: clock: a3700: change pwm clock for 600/600 and 1200/750 preset fb5e436 wtmi: uart: fix UART baudrate divisor calculation Signed-off-by: sean lee <ilf@live.com>
* arm-trusted-firmware-mvebu: switch to CZ.NIC's Secure FirmwareAndre Heider2021-07-256-0/+215
| | | | | | | | | | | | | | | | | CZ.NIC as part of Turris project released free and open source WTMI application firmware wtmi_app.bin for all Armada 3720 devices. This firmware includes additional features like access to Hardware Random Number Generator of Armada 3720 SoC which original Marvell's fuse.bin image does not have. Add a patch which allows to pass the commit id, so the firmware is able to identify itself, see a04bffeb. Add a patch to disable linking with gold, since the ARM toolchain doesn't ship gold. Cherry-pick the 3 post-release fixes. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update CM3 toolchain to v10.2Andre Heider2021-07-251-12/+12
| | | | | | | Linaro stopped shipping binary toolchains quite some time ago, switch over to the ARM builds. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update mv-ddr-marvell to current masterAndre Heider2021-07-251-3/+3
| | | | | | | | | | | | | 02e23db fix compilation errors popped up by GCC-10 7c35173 Merge pull request #29 from pali/sync-a38x-uboot bb734f5 mv_ddr: a38x: Use SOC_REGS_PHY_BASE for INTER_REGS_BASE ee1ea84 mv_ddr: a38x: Fix ddr3 compilation 70f3e2e mv_ddr: Fix comment typo dd960b4 mv_ddr: ddr3: Allow boards to specify CK_DELAY parameter a87f4f7 mv_ddr: ddr3: only use active chip-selects when tuning ODT 3defcec mv_ddr: a38x: Add support for setting timing in hws_topology_map Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update a3700-tools to current masterAndre Heider2021-07-252-8/+9
| | | | | | | | | | | | | | | | | | | 2efdb10 wtmi: Fix calculation of UART divider 4247e39 fix: twin die ddr porting guide 8ad7992 sys_init: Add missing newlines in debug mode 4ddea19 avs: Validate VDD value from OTP c444aeb avs: Fix description for avs value 0x2e 1915b78 tim: Optimize code generated by gettimver.sh and print newline 21f566d tim: Print mv_ddr version and configuration on UART 840b70b tim: Use variable $DDRFILE where possible c10e6ae tim: Fix waiting for UART TX ready 7bf95cf wtmi: Wait 3ms for the TX on UART to be empty prior resetting TX FIFO 63e8433 wtmi: Add "dirty" suffix to git commit and rebuild sys_init.bin binary when VERSION changes e949b58 wtmi: During setup clock phase print CPU and DDR speed 10376b5 wtmi: Flush output on UART after the '\n' character 509c647 Makefile: Check that specified DDR_TOPOLOGY option is valid Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update to v2.5Andre Heider2021-07-256-4/+441
| | | | | | | | | | | Revert to using the checked in `tbb_linux` image tool binary since building it drags in the rather big Crypto++ project. Cherry-pick the post-release UART fixes. Switch to AUTORELEASE while at it. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: remove unpacked sources upon cleanAndre Heider2021-07-251-0/+7
| | | | | | These are all unpacked in the Build/Prepare step, clean up accordingly. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: pass commit ids to a3700-utils/mv-ddr-marvellAndre Heider2021-01-303-0/+29
| | | | | | | | | The two required tools fail to identify their version when not compiling from a git clone, patch that in and pass on the used commit hashes. Upon boot it now prints "WTMI-devel-18.12.1-5598e150". Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump espressobin boards to CPU_1000_DDR_800Andre Heider2021-01-301-6/+6
| | | | | | | | | | | | | The cpufreq issue has been identified and a fix is in the process of beeing upstreamed [0]. Bump the boards to the default 1000MHz so they can run at that frequency once the fix is merged. Until then the boards are stuck at 800MHz (just claiming to run 1000Hz, which is a lie). [0] https://lore.kernel.org/linux-arm-kernel/20210114124032.12765-1-pali@kernel.org/ Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update to v2.4Andre Heider2021-01-302-12/+12
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: don't build emmc variantsAndre Heider2021-01-301-55/+0
| | | | | | | Starting with u-boot v2021.01 a single binary will be used for non-emmc and emmc variants. Signed-off-by: Andre Heider <a.heider@gmail.com>
* build: Extract trusted-firmware-a.mkHauke Mehrtens2020-12-021-87/+71
| | | | | | | | | | | | | | | | | | The include/trusted-firmware-a.mk file is based on the include/u-boot.mk file and should be used to build a Trusted Firmware-A (TFA) which was previously named Arm trusted firmware. This is useful for targets where the TFA is board specific like for Marvell SoCs and probably also NXP Layerscape SoCs. This also makes use of this abstraction in the arm-trusted-firmware-mvebu package to build board specific ATF binaries. The ATF binaries will be automatically activated and build when the board is selected in the normal build or all boards are selected. This should also activate the build when build bot creates images. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mvebu: fix topology for ESPRESSObin V3-V5 (1GB 1CS)Andre Heider2020-10-111-1/+1
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: add support for espressobinAndre Heider2020-09-181-21/+145
| | | | | | | | | | | | | | | | | | | | | | | | | Use build variants to cover all 11 hardware options [0]: espressobin-512mb espressobin-v3-v5-1gb-1cs espressobin-v3-v5-1gb-1cs-emmc espressobin-v3-v5-1gb-2cs espressobin-v3-v5-1gb-2cs-emmc espressobin-v3-v5-2gb espressobin-v3-v5-2gb-emmc espressobin-v7-1gb espressobin-v7-1gb-emmc espressobin-v7-2gb espressobin-v7-2gb-emmc CLOCKSPRESET is set to CPU_800_DDR_800 for all builds, which is the only stable configuration. That actually matches what Globalscale shipped as CPU_1000_DDR_800 combined with kernel versions < v4.19.42. [1][2]. [0] https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/marvell/armada/build.rst [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8db82563451f976597ab7b282ec655e4390a4088 [2] https://forum.armbian.com/topic/10335-espressobin-update-to-585-results-in-kernel-panic/?tab=comments#comment-79916 Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update a3700-utilsAndre Heider2020-09-181-3/+3
| | | | | | | | | | Update to current head of the branch A3700_utils-armada-18.12-fixed: 0967979 ddr: Add DDR3 2CS layout for EspressoBin v5 2GB board 486523e ddr: fix typo for ESPRESSObin 2GB layout 490b2b3 TBB: Fix building for Crypto++ 6.0 and later 0141dd1 TBB: Split INCDIR from LIBDIR Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update to v2.3Andre Heider2020-09-182-8/+30
| | | | | | | Switch to release tarballs and add missing license information while here. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: install to own subdirAndre Heider2020-09-181-1/+3
| | | | | | | | | Lift the dependency on the build order, where flash-image.bin may be missing from the u-boot dir. While at it, also install the uart images for rescue purposes. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: fix compiler spamAndre Heider2020-09-181-0/+2
| | | | | | | Gets rid of these warnings: cc1: note: someone does not honour COPTS correctly, passed 0 times Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: reuse default prepare targetAndre Heider2020-09-181-2/+1
| | | | | | Don't wipe internal state files, fixes e.g. refreshing patches. Signed-off-by: Andre Heider <a.heider@gmail.com>
* packages/boot: bump arm-trusted-firmware-mvebu versionScott Roberts2020-02-221-4/+4
| | | | | | | The current version of ATF does not support power off for SGMII COMPHY. Update to latest ATF to resolve this issue. Signed-off-by: Scott Roberts <ttocsr@gmail.com>
* packages/boot: add arm-trusted-firmware-mvebu and initial uDPU supportVladimir Vid2019-11-211-0/+112
ATF mvebu is required for building a functional bootloader for A7K/A8K and A37xx platforms. uDPU device is added as the first target. A3700 platform has a wide range of settings which can be used per device, so options are defined under the Device sections. Platform also required WTP (recovery) tools and mv-ddr package for the DDR topology configuration. 32-bit cross compiler is used for building the WTMI image. After the build, flash-image.bin can be used with the bubt command from the u-boot shell to flash the new version of u-boot. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 06:45:47 +0000