aboutsummaryrefslogtreecommitdiffstats
path: root/package/base-files
Commit message (Collapse)AuthorAgeFilesLines
* base-files: coreutil-sha256sum breaks status codeHuangbin Zhan2020-06-271-1/+1
| | | | | | | | | | | With package "coreutil-sha256sum" installed "sysupgrade" fails to perform 'sha256sum -s' and instead returns 'invalid option -- 's''. This is caused due to: different syntax for a sha256sum status check ('sha256sum --status' with "coreutil-sha256sum") '/usr/bin/sha256sum' being symlinked to '/usr/bin/gnu-sha256sum' (after installation of "coreutil-sha256sum") "coreutil-sha256sum" package from the packages feed replaces the Busybox sha256sum This patch restores for 'sysupgrade' the busybox call to its sha256sum applet. Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* base-files: remove urandom-seed definitionSungbo Eo2020-06-231-9/+0
| | | | | | | | urandom-seed has a separate Makefile, we can safely remove the definition here. Fixes: 27bfde9c9f78 ("base-files: move urandom seed bits into separate package") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* base-files: gpio switch: add named GPIO supportKuan-Yi Li2020-06-183-14/+32
| | | | | | | | | | | | | | | | Previously, gpio_switch only accepts GPIO pin number as input. Once a GPIO pin is exported and named by device tree, its pin state cannot be configured and saved across reboots by UCI. This patch adds support for named GPIO pins. Thus GPIO pin can be exported by device tree with active high/low correctly configured, having human-readable name in /sys/class/gpio/ is also now possible. More importantly, GPIO pins which are referenced by name will be immune from pin mapping breakage while unintentional pin number changes are introduced by kernel or driver updates. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* base-files: prevent issues w/ overlay on powerloss after sysupgradeSergey Ryazanov2020-06-032-1/+3
| | | | | | | | | | | | | | | | Due to filesystem write caching the old configuration data could stay out of flash for a long time during a first boot after the sysupgrade. Power loss during this period could damage the overlay data and even make device inaccessable via the network. Fix this by syncing data to a flash as soon as the previous configuration will be unpacked after the sysupgrade. Also sync the FS state after the sysupgrade.tgz archive removing to prevent duplicative extraction of a previous configuration. Tested with AMD Geode based board. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* base-files: fix LED IDE triggerThomas Albers2020-06-031-1/+1
| | | | | | | | | | This changes the ide-disk LED trigger to the generic disk-activity as ide-disk trigger was removed in upstream commit eb25cb9956cc ("leds: convert IDE trigger to common disk trigger"). Signed-off-by: Thomas Albers <thomas.gameiro@googlemail.com> [split into separate commit, commit description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* package/base-files: caldata: work around dd's limitationThibaut VARÈNE2020-05-282-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tl;dr: dd will silently truncate the output if reading from special files (e.g. sysfs attributes) with a too large bs parameter. This problem was exposed on some RouterBOARD ipq40xx devices which use a caldata payload which is larger than PAGE_SIZE, contrary to all other currently supported RouterBOARD devices: the caldata would fail to properly load with the current scripts. Background: dd doesn't seem to correctly handle read() results that return less than requested data. sysfs attributes have a kernel exchange buffer which is at most PAGE_SIZE big, so only 1 page can be read() at a time. In this case, if bs is larger than PAGE_SIZE, dd will silently truncate blocks to PAGE_SIZE. With the current scripts using bs=<size> count=1, the data is truncated to PAGE_SIZE as soon as the requested <size> exceeds this value. This commit works around this problem by using `cat` in the caldata routines that can read from a file (routines that read from mtd devices are untouched). cat correctly handles partial read requests. The output is then piped to dd with the same parameters as before, to ensure that the resulting file remains exactly the same. This is a simple workaround, the downside is that it uses a pipe and one more executable, and therefore has a larger memory footprint and is slower. This is deemed acceptable considering these routines are only used at boot time. Tested-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* base-files: switch_to_ramfs: add nand-utilsÁlvaro Fernández Rojas2020-05-182-2/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* base-files: upgrade: fix indentJavier Marcet2020-05-081-2/+2
| | | | | | | | Use same indent as for the rest of the file. Signed-off-by: Javier Marcet <javier@marcet.info> [add commit description] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* package/base-files: add caldata_sysfsload_from_file()Thibaut VARÈNE2020-05-082-1/+16
| | | | | | | | This routine enables loading caldata binary via the kernel sysfs loader See https://www.kernel.org/doc/html/v4.19/driver-api/firmware/fallback-mechanisms.html Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* package/base-files: caldata: allow setting target fileThibaut VARÈNE2020-05-082-9/+22
| | | | | | | This will enable platforms to extract caldata to an arbitrary file, or patch mac in an abitrary file. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* base-files: generate config files with correct permissionsHans Dedecker2020-04-301-0/+2
| | | | | | | As touch creates files with permission 0644 use umask to create config files with permission 0600 to be inline with INSTALL_CONF Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: ensure VERBOSE is setAlexander Couzens2020-04-211-1/+1
| | | | | | | If not set, it shows the following error sh: out of range Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* base-files: don't ship local build key when on buildbotDaniel Golle2020-04-121-1/+3
| | | | | | | | | | Including the local build key in /etc/opkg/keys isn't feasible when building on the buildbot: The included key collides with its copy already in openwrt-keyring which breaks the ImageBuilder. Not including a locally generated key also makes the base-files package more reproducible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: preinit: also config switch when no port roles definedChuanhong Guo2020-04-122-7/+8
| | | | | | | | | current preinit code in base-files doesn't config switch when there are no port roles defined. But this kind of configuration exists on single port devices where switch vlan is simply disabled. configure reset and enable_vlan property when a switch node exist. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* base-files: source functions.sh in /lib/functions/system.shAdrian Schmutzler2020-04-121-0/+1
| | | | | | | | The file /lib/functions/system.sh depends on find_mtd_index() and find_mtd_part() located in /lib/function.sh, so let's source that file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: do not source system.sh in functions.shAdrian Schmutzler2020-04-122-2/+1
| | | | | | | | | | | | | | | | | | The default_postinst() function in /lib/functions.sh sources /lib/functions/system.sh before cycling through uci-defaults files. This creates a pseudo-cyclic dependency as system.sh also uses functions that are located in functions.sh. Despite that, there is actually only one uci-defaults file in the entire repo that needs system.sh, and this one contains an explicit source for system.sh anyway. Consequently, this patch removes the sourcing of system.sh in functions.sh. There are no relevant uses in packages, routing and luci repositories. This may require adjustments for downstream, though. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: add enabled commands to service rc.commonFlorian Eckert2020-04-082-1/+2
| | | | | | Add missing enbaled command help output. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* treewide: convert sed -r to posix -EKevin Darbyshire-Bryant2020-04-041-1/+1
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* x86: generate EFI platform bootable images李国2020-03-311-8/+54
| | | | | | | | | | | | | | | | | Add EFI platform bootable images for x86 platforms. These images can also boot from legacy BIOS platform. EFI System Partition need to be fat12/fat16/fat32 (not need to load filesystem drivers), so the first partition of EFI images are not ext4 filesystem any more. GPT partition table has an alternate partition table, we did not generate it. This may cause problems when use these images as qemu disk (kernel can not find rootfs), we pad enough sectors will be ok. Signed-off-by: 李国 <uxgood.org@gmail.com> [part_magic_* refactoring, removed genisoimage checks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: convert leading spaces to tabs in functions.shAdrian Schmutzler2020-03-131-2/+2
| | | | | | Use tabs for indent consistently. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: Add /etc/shinit for non-login shell initJeffery To2020-03-014-20/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because /etc/profile (and ~/.profile) are read by login shells only, aliases and functions defined there are not available to non-login shells, e.g. when using screen or tmux. If the ENV environment variable exists (exported by /etc/profile or ~/.profile) and references an existing file, then all interactive shells (login or non-login) will read that file as well. This sets the ENV environment variable in /etc/profile, pointing to /etc/shinit. This also adds /etc/shinit, which: * Contains alias and function definitions originally in /etc/profile * Sources /etc/mkshrc if the user is using mksh (also originally in /etc/profile), as /etc/mkshrc is meant for all interactive shells * Sources ~/.mkshrc if the user is using mksh, to compensate for the fact that mksh will not read ~/.mkshrc if ENV is set * Sources ~/.shinit if the user is not using mksh This also removes the shebang from /etc/profile, as the file is sourced, not executed. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* base-files: add all buildinfo with INCLUDE_CONFIGXu Wang2020-02-271-1/+3
| | | | | | | | | | CONFIG_INCLUDE_CONFIG option is helpful for being able to rebuild the exact same firmware as you see on a live OpenWRT instance, but it's crucially missing feeds information, so we can't rebuild the exact same package versions. This commit fixes this by adding the remaining feeds (and version) buildinfo files to the image. Signed-off-by: Xu Wang <xwang1498@gmx.com>
* base-files: diag: restore default trigger for 'boot' LEDPiotr Dymacz2020-02-243-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For devices without a dedicated 'diag' LED, we use sometimes one of other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade' stages. In some cases, at the same time these LEDs have defined default triggers in DTS using 'linux,default-trigger' property. Current 'diag' setup removes the trigger and turns off 'boot' LED after bootup. One of the examples of such device is TP-Link TL-WR841N v14 (ramips) which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag': aliases { led-boot = &led_wlan; led-failsafe = &led_wlan; led-upgrade = &led_wlan; }; [...] led_wlan: wlan { label = "tl-wr841n-v14:green:wlan"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default trigger defined in DTS is restored for 'diag' LED which isn't used for indicating 'running' stage. Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* brcm47xx: rename target to bcm47xxAdrian Schmutzler2020-02-141-1/+1
| | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: remove some bashismsSven Roederer2020-01-261-1/+1
| | | | | | | | | | "[[" is a bash extension for test. As the ash-implementation is not fully compatible we drop its usage. Also change to "=" for simple test, which is sufficient. (see d6ac8ca76c04ed) Signed-off-by: Sven Roederer <devel-sven@geroedel.de> [split patch, removed shebang] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files/functions.sh: use grep -q instead of []Rosen Penev2020-01-181-4/+4
| | | | | | | | | | | | It's cleaner and faster as it does not need to do extra work. Also removed $() to avoid executing the output. The shell can handle it. https://github.com/koalaman/shellcheck/wiki/SC2143 Signed-off-by: Rosen Penev <rosenp@gmail.com> [correct || to && for one conversion] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files/system.sh: remove $ in $(())Rosen Penev2020-01-171-1/+1
| | | | | | | | Not needed. https://github.com/koalaman/shellcheck/wiki/Sc2004 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files/functions.sh: use && instead of -aRosen Penev2020-01-171-2/+2
| | | | | | | | -a is not well defined. https://github.com/koalaman/shellcheck/wiki/SC2166 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files/functions.sh: remove useless catRosen Penev2020-01-171-2/+2
| | | | | | | | The cut command can take a file as an input. https://github.com/koalaman/shellcheck/wiki/SC2002 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files/functions.sh: don't use $var in $(())Rosen Penev2020-01-171-3/+3
| | | | | | | | It's not needed. It can also lead to subtle bugs. https://github.com/koalaman/shellcheck/wiki/Sc2004 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* dropbear: move failsafe code out of base-filesKyle Copperfield2020-01-152-7/+1
| | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Failsafe code of dropbear should be in the dropbear package not the base-files package. Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
* base-files: fix build for /sbin/pkg_checkXu Wang2020-01-141-2/+2
| | | | | | | | | | Setting CONFIG_IPK_FILES_CHECKSUMS=y causes sha256 checksum files to be included with the packages to check for corruption. This commit fixes two issues: - /sbin/pkg_check was being removed incorrectly if IPK_FILES_CHECKSUMS=y - checksums were being saved in the wrong file Signed-off-by: Xu Wang <xwang1498@gmx.com>
* base-files: use jshn lib for ubus sysupgrade argument generationFlorian Eckert2020-01-141-14/+11
| | | | | | | | With this change the well known jshn library will be used, to build the json arguments for the ubus sysupgrade method. This is also used in all other shell program that uses JSON. This commit unifies that. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: move /tmp/resolv.conf.auto to /tmp/resolv.conf.d/Daniel Golle2020-01-072-3/+4
| | | | | | Having it in a directory it more friendly for mount-bind. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: sysupgrade: exit if the firmware download failedPetr Štetiar2020-01-052-2/+2
| | | | | | | | | Sysupgrade process shouldn't continue if the firmware image couldn't be downloaded. Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020940.html Reported-by: Petr Novák <petrn@me.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: send informational UDP message each second waitingPaul Fertser2019-12-191-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The preinit network initialisation and failsafe informational message are inherently racy as the interface takes some time to become functional after "ip link set $pi_ifname up" command. Consider this timing: [ 12.002713] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.008819] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready [ 12.118877] random: procd: uninitialized urandom read (4 bytes read) [ 13.068614] eth1: link up (1000Mbps/Full duplex) [ 13.073309] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 13.080445] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready Since the UDP message was sent prior to link becoming ready, it was never seen on the wire. The default failsafe timeout is set to 2 seconds, so with this patch there are two attempts to send the message, one spent in vain, and the other visible in tcpdump on an attached host. Of course, in cases when the interface is brought up faster it leads to two messages, however it should be harmless. This patch (almost) doesn't affect normal boot time while still allowing to enter failsafe reliably with a single button press, matching the official "generic failsafe" documentation. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* base-files: config_generate: split macaddr with multiple ifacesSungbo Eo2019-11-232-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | netifd does not handle network.@device[x].name properly if it contains multiple ifaces separated by spaces. Due to this, board.d lan_mac setup does not work if multiple ifaces are set to LAN by ucidef_set_interface_lan. To fix this, create a device node for each member iface when running config_generate instead. Those are named based on the member ifname: ucidef_set_interface_lan "eth0 eth1.1" ucidef_set_interface_macaddr "lan" "yy:yy:yy:yy:yy:01" will return config device 'lan_eth0_dev' option name 'eth0' option macaddr 'yy:yy:yy:yy:yy:01' config device 'lan_eth1_1_dev' option name 'eth1.1' option macaddr 'yy:yy:yy:yy:yy:01' ref: https://github.com/openwrt/openwrt/pull/2542 Signed-off-by: Sungbo Eo <mans0n@gorani.run> [always use new scheme, extend description, change commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: include 'reconf' in help output of 'wifi' commandDaniel Golle2019-11-181-1/+1
| | | | | Reported-by: Dirk Brenken <dev@brenken.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: rc.common: fix missing EXTRA_HELP textsPeter Stadler2019-11-142-2/+2
| | | | | | | | | | | | | | | Commit ed5b9129d7a4 ("base-files: implement generic service_running") has added EXTRA_HELP variable, thus overriding already available EXTRA_HELP text available in other init scripts, resulting in the missing help text from services like dropbear for example. So fix this regression by appending EXTRA_HELP text provided by the other init scripts into the one provided by the script itself. Fixes: ed5b9129d7a4 ("base-files: implement generic service_running") Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at> [commit title/description facelift, fixes tag, fixed From:, pkg bump] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: add /usr/share/libubox/jshn.sh to sysupgrade stage2Russell Senior2019-11-131-1/+1
| | | | | | | | Discovered recent changes had broken sysupgrade for ar71xx mikrotik rb-493g, traced the problem to missing /usr/share/libubox/jshn.sh after switching to tmpfs. Signed-off-by: Russell Senior <russell@personaltelco.net>
* base-files: remove shebang from uci-defaults filesAdrian Schmutzler2019-11-134-7/+1
| | | | | | | | | uci-defaults are sourced and non-executable, so they do not require a shebang. While at it, apply consistent naming scheme. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: add 'wifi reconf'John Crispin2019-11-122-1/+6
| | | | | | | | Now that netifd and hostapd allow dynamic reconfiguration, add a command to trigger it. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "base-files: rename hostname with EUI of mac address"Adrian Schmutzler2019-11-071-15/+1
| | | | | | | | | | | | This reverts commit 6170c46b477d4953f91b99e805a276de444913cf. There has been demand for further evaluation of the impact of a changed hostname, so this is reverted for now. The default hostname will be "OpenWrt" again after this commit. The macaddr_geteui() function is not removed by this revert. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: rename hostname with EUI of mac addressRosy Song2019-11-072-1/+22
| | | | | | | | | | | | | | | If a label MAC address is provided for device, system will rename the hostname with OpenWrt_{eui mac address}. This helps to distinguish between different devices. Since it's no good idea to nest json_* functions, this code does not use get_mac_label directly, but only get_mac_label_dt as external resource. Signed-off-by: Rosy Song <rosysong@rosinson.com> [merged with commit introducing macaddr_geteui, rebased on updated label MAC address storage, extended commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: don't store label MAC address in uci system configAdrian Schmutzler2019-11-072-8/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | If set, label MAC address is available from one of two sources, device tree or board.json. So far, the function get_mac_label was meant for retrieving the address, while an option in uci system config was specified only for case 2 (board.json). The uci config option has several drawbacks: - it is only used for a fraction of devices (those not in DT) - label MAC address is a device property, while config implies user interaction - label_macaddr option will only be set if /etc/config/system does not exist (i.e. only for new installations) Thus, this patch changes the behavior of get_mac_label: Instead of writing the value in board.json to uci system config and reading from this location afterwards, get_mac_label now extracts data from board.json directly. The uci config option won't be used anymore. In addition, two utility functions for extraction only from DT or from board.json are introduced. Since this is only changing the access to the label MAC address, it won't interfere with the addresses stored in the code base so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: hotplug-call: exit success when dir is absentYousong Zhou2019-10-292-3/+3
| | | | | | | | | "block mount" invokes "hotplug-call mount". It emits the following error when mount is not present hotplug-call call failed Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* base-files: uci-defaults: do config flush in one shotRoman Yeryomin2019-10-221-2/+1
| | | | | | | | | | | Moving a file between tmpfs and other fs is neither faster nor safer, thus no point in doing it in two steps. Use new jshn option to write output directly to file. Originally discussed here: http://lists.openwrt.org/pipermail/openwrt-devel/2017-December/010127.html Signed-off-by: Roman Yeryomin <roman@advem.lv>
* Revert "build: separate signing logic"John Crispin2019-10-211-9/+8
| | | | | | | | This reverts commit 4a45e69d190f72ed94878487b271ed7651dd9efa. This broke the buildbots Signed-off-by: John Crispin <john@phrozen.org>
* build: separate signing logicPaul Spooren2019-10-211-8/+9
| | | | | | | | | | | | | | | | This separates the options for signature creation and verification * SIGNED_PACKAGES create Packages.sig * SIGNED_IMAGES add ucert signature to created images * CHECK_SIGNATURE add verification capabilities to images * INSTALL_LOCAL_KEY add local key-build to /etc/opkg/keys Right now the buildbot.git contains some hacks to create images that have signature verification capabilities while not storing private keys on buildbot slaves. This commit allows to disable these steps for the buildbots and only perform signing on the master. Signed-off-by: Paul Spooren <mail@aparcar.org>
* treewide: use a single ath10k MAC patching function with checksumAdrian Schmutzler2019-10-151-7/+1
| | | | | | | | | | | | | | | | While all ath10k eeproms have a checksum field, so far two functions for patching ath10k MAC address have been present (and been used). This merges code to provide a single function ath10k_patch_mac in caldata.sh, having its name in accordance with ath9k functions. By doing so, correct MAC patching for current and future ath10k devices should be ensured. This patch adds checksum adjustments for several targets on ath79 and lantiq. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 13:59:36 +0000