aboutsummaryrefslogtreecommitdiffstats
path: root/package/base-files/files/sbin
Commit message (Collapse)AuthorAgeFilesLines
* base-files: use jshn lib for ubus sysupgrade argument generationFlorian Eckert2020-01-141-14/+11
| | | | | | | | With this change the well known jshn library will be used, to build the json arguments for the ubus sysupgrade method. This is also used in all other shell program that uses JSON. This commit unifies that. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: sysupgrade: exit if the firmware download failedPetr Štetiar2020-01-051-1/+1
| | | | | | | | | Sysupgrade process shouldn't continue if the firmware image couldn't be downloaded. Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020940.html Reported-by: Petr Novák <petrn@me.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: include 'reconf' in help output of 'wifi' commandDaniel Golle2019-11-181-1/+1
| | | | | Reported-by: Dirk Brenken <dev@brenken.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: add 'wifi reconf'John Crispin2019-11-121-0/+5
| | | | | | | | Now that netifd and hostapd allow dynamic reconfiguration, add a command to trigger it. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: hotplug-call: exit success when dir is absentYousong Zhou2019-10-291-2/+2
| | | | | | | | | "block mount" invokes "hotplug-call mount". It emits the following error when mount is not present hotplug-call call failed Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* treewide: sysupgrade: use $UPGRADE_BACKUP to check for backupRafał Miłecki2019-09-111-1/+0
| | | | | | | Now that $UPGRADE_BACKUP is set conditionally there is no need to check the $UPGRADE_OPT_SAVE_CONFIG anymore. All conditions can be simplified. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: sysupgrade: pass "backup" ubus attributeRafał Miłecki2019-09-111-0/+3
| | | | | | | | This explicitly tells procd what backup file should be used during sysupgrade (if any). It's much more generic this way compared to the magic /tmp/sysupgrade.tgz file that had to be created before a call. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: pass "force" parameter to the "sysupgrade" callRafał Miłecki2019-09-041-0/+3
| | | | | | | This makes sysupgrade work with the most recent procd that validates firmware before proceeding. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: use JSON for storing firmware validation infoRafał Miłecki2019-08-301-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far firmware validation result was binary limited: it was either successful or not. That meant various limitations, e.g.: 1) Lack of proper feedback on validation problems 2) No way of marking firmware as totally broken (impossible to install) This change introduces JSON for storing detailed validation info. It provides a list of performed validation tests and their results. It allows marking firmware as non-forceable (broken image that can't be even forced to install). Example: { "tests": { "fwtool_signature": true, "fwtool_device_match": true }, "valid": true, "forceable": true } Implementation is based on *internal* check_image bash script that: 1) Uses existing validation functions 2) Provides helpers for setting extra validation info This allows e.g. platform_check_image() to call notify_check_broken() when needed & prevent user from bricking a device. Right now the new JSON info is used by /sbin/sysupgrade only. It still doesn't make use of "forceable" as that is planned for later development. Further plans for this feature are: 1) Expose firmware validation using some new ubus method 2) Move validation step from /sbin/sysupgrade into "sysupgrade" ubus method so: a) It's possible to safely sysupgrade using ubus only b) /sbin/sysupgrade can be more like just a CLI Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: sysupgrade: pass "save_partitions" option to the "sysupgrade" methodRafał Miłecki2019-08-221-7/+2
| | | | | | | This explicitly lets stage2 know if partitions should be preserved. No more "touch /tmp/sysupgrade.always.overwrite.bootdisk.partmap" hack. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: pass "save_config" option to the "sysupgrade" methodRafał Miłecki2019-08-221-1/+4
| | | | | | This explicitly lets stage2 know if config should be preserved. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: don't set ARGV and ARGCRafał Miłecki2019-07-171-3/+0
| | | | | | Those are not used by any image check function anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: move stage2 upgrade to separated fileRafał Miłecki2019-07-111-1/+1
| | | | | | | | | do_upgrade_stage2() isn't really any common code. It isn't used anywhere except for /sbin/sysupgrade that passes it to the stage2. Moving its code to separated file also simplifies COMMAND variable. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: move urandom seed bits into separate packagePetr Štetiar2019-06-111-20/+0
| | | | | | | So it's possible to install or remove it as needed. Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: sysupgrade: support additional mtd optionsDavid Bauer2019-01-261-0/+1
| | | | | | | | | | Add support for passing additional parameters to mtd called during sysupgrade. It will be required to toggle the "recovery moe" flag supported by recent tp-link boards. Signed-off-by: David Bauer <mail@david-bauer.net> [split code from board support patch; add commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: Optionally provide file checksums in package metadataMichal Hrusecky2019-01-221-0/+130
| | | | | | | This may be useful if you don't entirely trust your flash and want to be able to check for corruptions. Signed-off-by: Michal Hrusecky <Michal@Hrusecky.net>
* base-files: add sysupgrade -k to save list of pkgsLuiz Angelo Daros de Luca2018-12-091-1/+35
| | | | | | | | | | | | | | When '-k' is used, sysupgrade inserts into backup a new file /etc/backup/installed_packages.txt which contains pkgname and origin (rom, overlay, unknown) without touching rootfs. It's mainly used to reinstall all extra packages: # opkg update # grep "\toverlay" /etc/backup/installed_packages.txt | cut -f1 | xargs -r opkg install # rm /etc/backup/installed_packages.txt Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* base-files: add sysupgrade -o to save all overlay filesLuiz Angelo Daros de Luca2018-12-091-4/+48
| | | | | | | | | | | Add sysupgrade '-o' option in order to include all overlay files in backup, except for those that are from packages but including files listed in conffiles, sysupgrade.conf or /lib/upgrade/keep.d. With '-u' option, it will skip files equals to /rom and conffiles that were not changed. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* base-files: add sysupgrade -u to skip unchanged filesLuiz Angelo Daros de Luca2018-12-091-8/+19
| | | | | | | | | | | With '-u', for a file /aaa/bbb/ccc enlisted for backup, it will only get into backup if /rom/aaa/bbb/ccc does not exist or /aaa/bbb/ccc is different from /rom/aaa/bbb/ccc. It also works with '-c', but only effective for files touched but not modified. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* base-files: minor cleanups on sysupgradeLuiz Angelo Daros de Luca2018-12-091-16/+17
| | | | | | | | | | | | | Renamed add_uci_conffiles to add_conffiles as it includes any conffiles listed, not only UCI ones. Make do_save_conffiles arg mandatory Allow other options after -l (like -c) Do not use stdout for error messages (fixes backup to stdout) Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* base-files: fix several bashismsMichael Heimpold2018-12-051-1/+1
| | | | | | | For equality test a simple = is sufficient, the == is usually disregarded as bashism. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* base-files: sysupgrade: Allow downloading of firmware images using HTTPSPetr Štetiar2018-11-251-1/+2
| | | | | | Currently it's only possible to download images over HTTP. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: make wifi report unknown commandThibaut VARÈNE2018-08-101-2/+3
| | | | | | | | | | | Avoid having /sbin/wifi silently ignore unknown keywords and execute "up"; instead display the help message and exit with an error. Spell out the "up" keyword (which has users), add it to usage output, and preserve the implicit assumption that runing /sbin/wifi without argument performs "up". Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* base-files: introduce sysupgrade signature chain verificationDaniel Golle2018-08-081-1/+1
| | | | | | | | | Verify ucert signature chains in sysupgrade images in case ucert is installed and $CHECK_IMAGE_SIGNARURE = 1. Also make sure ucert host binary is present and generate a self-signed ucert in case $TOPDIR/key-build.ucert is missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: sysupgrade: abort if config backup failsAndreas Ziegler2018-08-061-0/+5
| | | | | | | Sysupgrade shouldn't proceed, if the backup of the configuration fails because tar (or gzip) exit with a non-zero code. Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>
* base-files: drop fwtool_pre_upgradeJohn Crispin2018-07-301-3/+0
| | | | | | | this feature has never worked, the fw image name was not passed and the -t parameter was missing in the tool invocation. drop the feature. Signed-off-by: John Crispin <john@phrozen.org>
* basefiles: Reword sysupgrade messageKevin Darbyshire-Bryant2018-07-081-1/+1
| | | | | | sysupgrade 'upgrade' message more verbose than needs be. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* base-files: sysupgrade: do not rely on opkg to list changed conffilesMatthias Schiffer2018-03-071-1/+20
| | | | | | | Many packages use the opkg conffiles field to list configuration files that are to be retained on upgrades. Make this work on systems without opkg. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: sysupgrade: correct command help textKevin Darbyshire-Bryant2018-01-121-1/+0
| | | | | | | | | | Commit 30f61a34b4cfd2c676fea4a919e089d6a77254e9 claimed to drop -d & -p options. In reality only -d was dropped. Update command help text to reflect that -d is no longer a supported option. Fixes FS#1187 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* base-files: fix sysupgrade -b/-l when -c is usedLuiz Angelo Daros de Luca2017-12-141-10/+11
| | | | | | | | | | | | | Since /overlay/upper appeared, -b ignored -c silently (cause it was still checking for /overlay/etc). Now, if /overlay/upper is absent, sysupgrade -c will fail and exit verbosely. Fix -l to consider -c (it never did). Clean up to always use /overlay/upper/xxx instead of still checking for /overlay/xxx. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* base-files: automatically handle paths and symlinks for RAMFS_COPY_BINMatthias Schiffer2017-07-111-2/+0
| | | | | | | | | | | | Depending on busybox applet selection, paths of basic utiilties may differ, and may not work as symlinks to busybox. Simply using whatever binary is found in PATH and detecting symlinks automatically is more robust and easier to maintain. The list of binaries is also slightly cleaned up and duplicates are removed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: add support for staged sysupgrades from failsafe modeMatthias Schiffer2017-05-291-5/+13
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: sysupgrade cleanupMatthias Schiffer2017-05-291-2/+0
| | | | | | | | | | | | Some functions only used by stage2 are moved there from common.sh. One piece that could still use more cleanup is platform_pre_upgrade: many targets reference files from there are aren't available in the ramfs, so we need to evaluate it before the switch; conversely, flash writes happen in that function on some targets. Targets that do the latter should be fixed eventually to use platform_do_upgrade for that purpose. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: always use staged sysupgradeMatthias Schiffer2017-05-291-31/+46
| | | | | | | | | | | Support for the -d and -p options is dropped; it may be added again at some point by adding these flags to the ubus sysupgrade call. A downside of this is that we get a lot less information about the progress of the upgrade: as soon as the actual upgrade starts, all shell sessions are killed to allow unmounting the root filesystem. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* Revert "sysupgrade: run only one instance at a time."Jo-Philipp Wich2017-05-261-14/+0
| | | | | | | | | | | | | This reverts commit e96a9a9af82c00dcce606a84a7bb87a00411385d. The change breaks sysupgrade through LuCI and two-stage sysupgrade on NAND targets. There is also a mismatch of file paths in lock and unlock operations. This commit was apparently neither properly tested, nor reviewed, so drop it for now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sysupgrade: run only one instance at a time.Kenneth Johansson2017-05-251-0/+14
| | | | | | | Things do not work well if running multiple instances of upgrade at the same time. Signed-off-by: Kenneth Johansson <kenneth.johansson@inteno.se>
* base-files: Added a deprecation notice on wifi detectDavid Pinilla Caparrós2017-02-131-1/+7
| | | | | | | | When running wifi detect, the user will be told on error output that wifi detect is deprecated, that wifi config must be used instead. Also the commit that changes it is referenced for further info. Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
* base-files: Add wifi config to wifi command usageDavid Pinilla Caparrós2017-02-131-2/+2
| | | | | | | | | | Since commit 5f8f8a366136a07df661e31decce2458357c167a wifi detect does not longer work and wifi config it's used to configure not yet configured wireless devices. This commit changes command usage to reflect that change. Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
* base-files: validate metadata of sysupgrade imagesFelix Fietkau2016-11-191-1/+2
| | | | | | | | | | | Use fwtool to extract it, only require metadata to be present if the platform sysupgrade script sets REQUIRE_IMAGE_METADATA=1 Image metadata is in JSON format and contains a list of supported devices, along with version information that could be displayed by a UI later before the actual upgrade happens. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files, mac80211, broadcom-wl: wifi detection and configurationChristian Lamparter2016-11-031-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the wifi detection script is executed as part of the (early) boot process. Pluggable wifi USB devices, which are inserted at a later time are not automatically detected and therefore they don't show up in LuCI. A user has to deal with wifi detection manually, or restart the router. However, the current "sleep 1" window - which the boot process waits for wifi devices to "settle down" - is too short to detect wifi devices for some routers anyway. For example, this can happen with USB WLAN devices on the WNDR4700. This is because the usb controller needs to load its firmware from UBI and initialize, before it can operate. The issue can be seen on a BT HomeHub 5A as well as soon as the caldata are on an ubi volume. This is because the ath9k card has to be initialized by owl-loader first. Which has to wait for the firmware extraction script to retrieve the pci initialization values inside the caldata. This patch moves the wifi configuration to hotplug scripts. For mac80211, the wifi configuration will now automatically run any time a "ieee80211" device is added. Likewise broadcom-wl's script checks for new "net" devices which have the "wl$NUMBER" moniker. Issues with spawning multiple interface configuration - in case the detection script is run concurrently - have been resolved by using a named section for the initial configuration. Concurrent configuration scripts will now simply overwrite the same existing configuration. A workaround which preserves the "sleep 1" window for just the first boot has been added. This allows the existing brcm47xx boot and mvebu uci-default scripts to correctly setup the initial mac addresses and regulatory domain. And finally, the patch renames the "wifi detect" into "wifi config". As the script no longer produces any output that has to be redirected or appended to the configuration file. Thanks to Martin Blumenstingl for helping with the implementation and testing of the patch. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: generate /etc/config/wireless, if it doesn't existMathias Kresin2016-11-031-0/+2
| | | | | | | | | | | | This patch adds a check in "wifi detect" to test if the wireless configuration file does exist. If it doesn't exist, an empty /etc/config/wireless file will be created. This is necessary because uci doesn't create new files, instead the tool just exits with "uci: Entry not found". Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: remove non-working filter option for wifi detectChristian Lamparter2016-10-041-2/+2
| | | | | | | | | | | This patch removes the non-working wifi driver filter for the wifi detection script. I figured that rather than replacing ${2:-$DRIVERS} with ${1:-$DRIVERS}, it would be better to remove it. Nobody needed it in the previous years. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: use procd init for urandom_seedEtienne CHAMPETIER2016-07-271-0/+20
| | | | | | | | | | Previous implementation was blocking the init and breaking halt/reboot/sysupgrade (reported by Daniel Golle) v2: use procd logging, use set -e + trap for error handling Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org>
* x86: preserve partition table on sysupgradeJo-Philipp Wich2016-02-091-0/+3
| | | | | | | | | | | | | | With this patch sysupgrade will write directly to the partitions instead of to the main disk. The UUID is copied from the image to the MBR as well. This prevents the mbr from being completely overwritten and losing the partition table. The -p option has been added to maintain the original behavior and overwite the entire disk with the new image. Tests have been added to ensure that the image partitions match up with the active partitions. Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> SVN-Revision: 48682
* base-files: honor CONFIG_TARGET_INIT_PATHJo-Philipp Wich2016-02-081-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48678
* base-files: Fix sysupgrade overlay savingJo-Philipp Wich2016-01-171-0/+1
| | | | | | | | | | A previous change to sysupgrade moved the overlay files into upper/ The -c switch generates a list of files to backup, but the sed calls did not take this into consideration. Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> SVN-Revision: 48281
* base-files: sanitize and unify $PATHSteven Barth2015-10-021-1/+1
| | | | | | | | Previously init and hotplug paths were different from console. Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 47080
* base-files: add support for platform_pre_upgrade functionJohn Crispin2015-04-091-0/+8
| | | | | | | | | | | | | | | | Current NAND sysupgrade process is a bit hard to follow due to the way of triggering stage1. Currently this is done by leaving a /mark/ in the form of /tmp/sysupgrade-nand-path during nand_do_platform_check. Existence of this mark stops standard sysupgrade process (as the result of sysupgrade_pre_upgrade exit). This may be a bit misleading. Proposed solution adds a new function that will allow platform.sh trigger NAND sysupgrade consciously. This will also allow cleaning nand_do_platform_check limiting it to just checking the image. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45338
* base-files: firstboot: pass down arguments such as -y to jffs2resetLuka Perkov2015-03-101-1/+1
| | | | | | | | This brings back old behavior. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44651
* fix sysupgrade on overlayfs v23+Imre Kaloz2014-11-241-1/+6
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43365
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 18:24:28 +0000