aboutsummaryrefslogtreecommitdiffstats
path: root/package/base-files/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* base-files: remove urandom-seed definitionSungbo Eo2020-06-231-9/+0
| | | | | | | | urandom-seed has a separate Makefile, we can safely remove the definition here. Fixes: 27bfde9c9f78 ("base-files: move urandom seed bits into separate package") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* base-files: gpio switch: add named GPIO supportKuan-Yi Li2020-06-181-1/+1
| | | | | | | | | | | | | | | | Previously, gpio_switch only accepts GPIO pin number as input. Once a GPIO pin is exported and named by device tree, its pin state cannot be configured and saved across reboots by UCI. This patch adds support for named GPIO pins. Thus GPIO pin can be exported by device tree with active high/low correctly configured, having human-readable name in /sys/class/gpio/ is also now possible. More importantly, GPIO pins which are referenced by name will be immune from pin mapping breakage while unintentional pin number changes are introduced by kernel or driver updates. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* package/base-files: caldata: work around dd's limitationThibaut VARÈNE2020-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tl;dr: dd will silently truncate the output if reading from special files (e.g. sysfs attributes) with a too large bs parameter. This problem was exposed on some RouterBOARD ipq40xx devices which use a caldata payload which is larger than PAGE_SIZE, contrary to all other currently supported RouterBOARD devices: the caldata would fail to properly load with the current scripts. Background: dd doesn't seem to correctly handle read() results that return less than requested data. sysfs attributes have a kernel exchange buffer which is at most PAGE_SIZE big, so only 1 page can be read() at a time. In this case, if bs is larger than PAGE_SIZE, dd will silently truncate blocks to PAGE_SIZE. With the current scripts using bs=<size> count=1, the data is truncated to PAGE_SIZE as soon as the requested <size> exceeds this value. This commit works around this problem by using `cat` in the caldata routines that can read from a file (routines that read from mtd devices are untouched). cat correctly handles partial read requests. The output is then piped to dd with the same parameters as before, to ensure that the resulting file remains exactly the same. This is a simple workaround, the downside is that it uses a pipe and one more executable, and therefore has a larger memory footprint and is slower. This is deemed acceptable considering these routines are only used at boot time. Tested-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* base-files: switch_to_ramfs: add nand-utilsÁlvaro Fernández Rojas2020-05-181-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* package/base-files: add caldata_sysfsload_from_file()Thibaut VARÈNE2020-05-081-1/+1
| | | | | | | | This routine enables loading caldata binary via the kernel sysfs loader See https://www.kernel.org/doc/html/v4.19/driver-api/firmware/fallback-mechanisms.html Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* package/base-files: caldata: allow setting target fileThibaut VARÈNE2020-05-081-1/+1
| | | | | | | This will enable platforms to extract caldata to an arbitrary file, or patch mac in an abitrary file. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* base-files: don't ship local build key when on buildbotDaniel Golle2020-04-121-1/+3
| | | | | | | | | | Including the local build key in /etc/opkg/keys isn't feasible when building on the buildbot: The included key collides with its copy already in openwrt-keyring which breaks the ImageBuilder. Not including a locally generated key also makes the base-files package more reproducible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: preinit: also config switch when no port roles definedChuanhong Guo2020-04-121-1/+1
| | | | | | | | | current preinit code in base-files doesn't config switch when there are no port roles defined. But this kind of configuration exists on single port devices where switch vlan is simply disabled. configure reset and enable_vlan property when a switch node exist. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* base-files: do not source system.sh in functions.shAdrian Schmutzler2020-04-121-1/+1
| | | | | | | | | | | | | | | | | | The default_postinst() function in /lib/functions.sh sources /lib/functions/system.sh before cycling through uci-defaults files. This creates a pseudo-cyclic dependency as system.sh also uses functions that are located in functions.sh. Despite that, there is actually only one uci-defaults file in the entire repo that needs system.sh, and this one contains an explicit source for system.sh anyway. Consequently, this patch removes the sourcing of system.sh in functions.sh. There are no relevant uses in packages, routing and luci repositories. This may require adjustments for downstream, though. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: add enabled commands to service rc.commonFlorian Eckert2020-04-081-1/+1
| | | | | | Add missing enbaled command help output. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: Add /etc/shinit for non-login shell initJeffery To2020-03-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because /etc/profile (and ~/.profile) are read by login shells only, aliases and functions defined there are not available to non-login shells, e.g. when using screen or tmux. If the ENV environment variable exists (exported by /etc/profile or ~/.profile) and references an existing file, then all interactive shells (login or non-login) will read that file as well. This sets the ENV environment variable in /etc/profile, pointing to /etc/shinit. This also adds /etc/shinit, which: * Contains alias and function definitions originally in /etc/profile * Sources /etc/mkshrc if the user is using mksh (also originally in /etc/profile), as /etc/mkshrc is meant for all interactive shells * Sources ~/.mkshrc if the user is using mksh, to compensate for the fact that mksh will not read ~/.mkshrc if ENV is set * Sources ~/.shinit if the user is not using mksh This also removes the shebang from /etc/profile, as the file is sourced, not executed. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* base-files: add all buildinfo with INCLUDE_CONFIGXu Wang2020-02-271-1/+3
| | | | | | | | | | CONFIG_INCLUDE_CONFIG option is helpful for being able to rebuild the exact same firmware as you see on a live OpenWRT instance, but it's crucially missing feeds information, so we can't rebuild the exact same package versions. This commit fixes this by adding the remaining feeds (and version) buildinfo files to the image. Signed-off-by: Xu Wang <xwang1498@gmx.com>
* base-files: diag: restore default trigger for 'boot' LEDPiotr Dymacz2020-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For devices without a dedicated 'diag' LED, we use sometimes one of other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade' stages. In some cases, at the same time these LEDs have defined default triggers in DTS using 'linux,default-trigger' property. Current 'diag' setup removes the trigger and turns off 'boot' LED after bootup. One of the examples of such device is TP-Link TL-WR841N v14 (ramips) which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag': aliases { led-boot = &led_wlan; led-failsafe = &led_wlan; led-upgrade = &led_wlan; }; [...] led_wlan: wlan { label = "tl-wr841n-v14:green:wlan"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default trigger defined in DTS is restored for 'diag' LED which isn't used for indicating 'running' stage. Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* dropbear: move failsafe code out of base-filesKyle Copperfield2020-01-151-1/+1
| | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Failsafe code of dropbear should be in the dropbear package not the base-files package. Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
* base-files: fix build for /sbin/pkg_checkXu Wang2020-01-141-2/+2
| | | | | | | | | | Setting CONFIG_IPK_FILES_CHECKSUMS=y causes sha256 checksum files to be included with the packages to check for corruption. This commit fixes two issues: - /sbin/pkg_check was being removed incorrectly if IPK_FILES_CHECKSUMS=y - checksums were being saved in the wrong file Signed-off-by: Xu Wang <xwang1498@gmx.com>
* base-files: move /tmp/resolv.conf.auto to /tmp/resolv.conf.d/Daniel Golle2020-01-071-1/+1
| | | | | | Having it in a directory it more friendly for mount-bind. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: sysupgrade: exit if the firmware download failedPetr Štetiar2020-01-051-1/+1
| | | | | | | | | Sysupgrade process shouldn't continue if the firmware image couldn't be downloaded. Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020940.html Reported-by: Petr Novák <petrn@me.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: config_generate: split macaddr with multiple ifacesSungbo Eo2019-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | netifd does not handle network.@device[x].name properly if it contains multiple ifaces separated by spaces. Due to this, board.d lan_mac setup does not work if multiple ifaces are set to LAN by ucidef_set_interface_lan. To fix this, create a device node for each member iface when running config_generate instead. Those are named based on the member ifname: ucidef_set_interface_lan "eth0 eth1.1" ucidef_set_interface_macaddr "lan" "yy:yy:yy:yy:yy:01" will return config device 'lan_eth0_dev' option name 'eth0' option macaddr 'yy:yy:yy:yy:yy:01' config device 'lan_eth1_1_dev' option name 'eth1.1' option macaddr 'yy:yy:yy:yy:yy:01' ref: https://github.com/openwrt/openwrt/pull/2542 Signed-off-by: Sungbo Eo <mans0n@gorani.run> [always use new scheme, extend description, change commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: rc.common: fix missing EXTRA_HELP textsPeter Stadler2019-11-141-1/+1
| | | | | | | | | | | | | | | Commit ed5b9129d7a4 ("base-files: implement generic service_running") has added EXTRA_HELP variable, thus overriding already available EXTRA_HELP text available in other init scripts, resulting in the missing help text from services like dropbear for example. So fix this regression by appending EXTRA_HELP text provided by the other init scripts into the one provided by the script itself. Fixes: ed5b9129d7a4 ("base-files: implement generic service_running") Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at> [commit title/description facelift, fixes tag, fixed From:, pkg bump] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: remove shebang from uci-defaults filesAdrian Schmutzler2019-11-131-1/+1
| | | | | | | | | uci-defaults are sourced and non-executable, so they do not require a shebang. While at it, apply consistent naming scheme. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: add 'wifi reconf'John Crispin2019-11-121-1/+1
| | | | | | | | Now that netifd and hostapd allow dynamic reconfiguration, add a command to trigger it. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: hotplug-call: exit success when dir is absentYousong Zhou2019-10-291-1/+1
| | | | | | | | | "block mount" invokes "hotplug-call mount". It emits the following error when mount is not present hotplug-call call failed Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* Revert "build: separate signing logic"John Crispin2019-10-211-9/+8
| | | | | | | | This reverts commit 4a45e69d190f72ed94878487b271ed7651dd9efa. This broke the buildbots Signed-off-by: John Crispin <john@phrozen.org>
* build: separate signing logicPaul Spooren2019-10-211-8/+9
| | | | | | | | | | | | | | | | This separates the options for signature creation and verification * SIGNED_PACKAGES create Packages.sig * SIGNED_IMAGES add ucert signature to created images * CHECK_SIGNATURE add verification capabilities to images * INSTALL_LOCAL_KEY add local key-build to /etc/opkg/keys Right now the buildbot.git contains some hacks to create images that have signature verification capabilities while not storing private keys on buildbot slaves. This commit allows to disable these steps for the buildbots and only perform signing on the master. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: add buildinfo files for reproducibilityPaul Spooren2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | generate feeds.buildinfo and version.buildinfo in build dir after containing the feed revisions (via ./scripts/feeds list -sf) as well as the current revision of buildroot (via ./scripts/getver.sh). With this information it should be possible to reproduce any build, especially the release builds. Usage would be to move feeds.buildinfo to feeds.conf and git checkout the revision hash of version.buildinfo. Content of feeds.buildinfo would look similar to this: src-git routing https://git.openwrt.org/feed/routing.git^bf475d6 src-git telephony https://git.openwrt.org/feed/telephony.git^470eb8e ... Content of version.buildinfo would look similar to this: r10203+1-c12bd3a21b Without the exact feed revision it is not possible to determine installed package versions. Also rename config.seed to config.buildinfo to follow the recommended style of https://reproducible-builds.org/docs/recording/ Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: drop support for the platform_nand_pre_upgrade()Rafał Miłecki2019-07-221-1/+1
| | | | | | | No target uses it anymore. All code from that callback was moved into the platform_do_upgrade(). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: don't set ARGV and ARGCRafał Miłecki2019-07-171-1/+1
| | | | | | Those are not used by any image check function anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: drop support for NAND upgrade in platform_pre_upgrade()Rafał Miłecki2019-07-081-1/+1
| | | | | | | With bcm53xx switched to the new procedure there is no more need for keeping that backward compatibility code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: drop unused jffs2_copy_config()Rafał Miłecki2019-07-081-1/+1
| | | | | | | | Its last usage was dropped back in 2013 in the commit b95bdc8ab56e ("kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: add network_get_uptime() to /lib/functions/network.shFlorian Eckert2019-06-291-1/+1
| | | | | | Add missing ubus api call for uptime value. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: change boot & umount STOP indexesJoseph Tingiris2019-06-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch is in a series to allow additional STOP indexes after umount, so that other block devices may stop cleanly. boot is now STOP=90 umount is now STOP=90 After this patch series, the resulting STOP indexes in the 80s & 90s will be: STOP=85 odhcpd.init STOP=89 conntrackd.init STOP=89 log.init STOP=89 rssileds.init STOP=90 boot STOP=90 kdump.init STOP=90 network STOP=90 sysfixtime STOP=90 umount STOP=98 mdadm.init (note: will be addressed in a separate patch) Signed-off-by: Joseph Tingiris <joseph.tingiris@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [PKG_RELEASE is now 200]
* base-files: apply new sysctl.conf at postinstYousong Zhou2019-06-211-1/+1
| | | | | | | | | | | | | | | | This is mainly for kmod-br-netfilter. To turn off bridge-netfilter-call-xxx immediately after installation While at it - Define filelist="/usr/lib/opkg/info/${pkgname}.list" - Reuse "[ -z "$root" ]" - Grep with "-m1" Fixes FS#2300 Reported-by: Marco Sartorius <tidbits@ormoorgmen.info> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* base-files: move urandom seed bits into separate packagePetr Štetiar2019-06-111-1/+10
| | | | | | | So it's possible to install or remove it as needed. Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: config_get: prevent filename globbingGünther Kelleter2019-01-301-1/+1
| | | | | | | | | When config_get is called as "config_get section option" the option is unexpectedly globbed by the shell which differs from the way options are read to a variable with "config_get variable section option". Add another layer of double quotes to fix it. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
* build: Optionally provide file checksums in package metadataMichal Hrusecky2019-01-221-0/+2
| | | | | | | This may be useful if you don't entirely trust your flash and want to be able to check for corruptions. Signed-off-by: Michal Hrusecky <Michal@Hrusecky.net>
* base-files: add network_get_metric() to /lib/functions/network.shFlorian Eckert2018-09-251-1/+1
| | | | | Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* base-files: create /etc/ethers by defaultLuiz Angelo Daros de Luca2018-08-211-0/+1
| | | | | | | | | | | /etc/ethers is missing on /rom but always created when dnsmasq runs. It is better to have it in place and avoid an extra change in flash after firstboot. It will generate an extra /etc/ethers-opkg when it has changed. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: introduce sysupgrade signature chain verificationDaniel Golle2018-08-081-2/+5
| | | | | | | | | Verify ucert signature chains in sysupgrade images in case ucert is installed and $CHECK_IMAGE_SIGNARURE = 1. Also make sure ucert host binary is present and generate a self-signed ucert in case $TOPDIR/key-build.ucert is missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: sysupgrade: abort if config backup failsAndreas Ziegler2018-08-061-1/+1
| | | | | | | Sysupgrade shouldn't proceed, if the backup of the configuration fails because tar (or gzip) exit with a non-zero code. Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>
* base-files: fix wrong sysctl parameter orderLuiz Angelo Daros de Luca2018-07-181-1/+1
| | | | | | | | | | | Restarting service sysctl echos multiple errors like: sysctl: -e: No such file or directory After the first filename, all remaining arguments are treated as files. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* base-files: network.sh: gracefully handle missing network.interface ubus nsJo-Philipp Wich2018-07-171-1/+1
| | | | | | | | | | | | | | | | | | | | | When attempting to use any of the functions in network.sh while netifd is not started yet, the ubus interface dump query will fail with "Not found", yielding an empty response. Subsequently, jsonfilter is invoked with an empty string instead of a valid JSON document, causing it to emit a second "unexpected end of data" error. This caused the dnsmasq init script to log the following errors during early boot on some systems: procd: /etc/rc.d/S19dnsmasq: Command failed: Not found. procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data. Fix the issue by allowing the ubus query to fail with "Not found" but still logging other failures, and by passing an empty JSON object to jsonfilter if the interface status cache is empty. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* include/feeds.mk: rework generation of opkg distfeeds.confMatthias Schiffer2018-07-121-2/+0
| | | | | | | Allow enabling/commenting/disabling each feed individually by using a tristate config symbol. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: fix feed list in PKG_CONFIG_DEPENDSMatthias Schiffer2018-07-121-1/+1
| | | | | | | FEEDS_ENABLED and FEEDS_DISABLED are derived from FEEDS_AVAILABLE, not FEEDS_INSTALLED. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: fix UCI config parsing and callback handlingTony Ambardar2018-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several long-standing issues present in the UCI shell API as documented in https://wiki.openwrt.org/doc/devel/config-scripting. They relate both to high-level, user-defined callback functions used to process UCI config files, and also to low-level functions used within scripts generally. The related problems have been encountered now and in the past, e.g. https://forum.openwrt.org/viewtopic.php?id=54295, and include: a) UCI parsing option() function and user-defined option_cb() callbacks being erroneously called during processing of "list" config file entries; b) normal usage of the low-level config_set() unexpectedy calling any defined option_cb() if present; and c) handling of the list_cb() not respecting the NO_CALLBACK variable. Root causes include a function stack "inversion", where the low-level config_set() function incorrectly calls the high-level option() function, intended only for processing the "option" keyword of UCI config files. This change addresses the inversion and other issues, making the option handling code more consistent and smaller, and simplifying developers' usage of UCI callbacks. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* base-files: depend on openwrt-keyringJo-Philipp Wich2018-05-201-1/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: disable accept_ra by defaultMatthias Schiffer2018-04-171-1/+1
| | | | | | | | | | | Our commands setting accept_ra to 0 on all interfaces got lost in the transition to procd. This remained unnoticed for a long time, as we also enable forwarding on all interfaces, which prevents RA handling by default. Restore the commands, while also fixing a possible race condition in the old version. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: /lib/functions.sh: remove unused insert_modulesMatthias Schiffer2018-04-171-1/+1
| | | | | | insert_modules has been unused since r5279. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: remove /etc/sysctl.d/ from conffilesMatthias Schiffer2018-04-131-3/+1
| | | | | | | | Let's use /etc/sysctl.d for package-provided snippets and leave /etc/sysctl.conf to the admin. Don't backup /etc/sysctl.d on upgrades, so old defaults get replaced properly. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: move netfilter sysctl defaults to specific kmod packagesMatthias Schiffer2018-04-131-1/+1
| | | | | | | Avoid warnings when applying settings for uninstalled kmods. See also FS#1073. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: change /var link from /tmp to tmpAlexander Couzens2018-04-051-1/+1
| | | | | | | | Some packages are already using $(1)/var on package install. On multiuser systems this breaks the build when multiple users build OpenWrt. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:12:31 +0000