aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* kernel: delete Linux 5.4 config and patchesDaniel Golle2022-03-211-2/+0
| | | | | | | | | As the upcoming release will be based on Linux 5.10 only, remove all kernel configuration as well as patches for Linux 5.4. There were no targets still actively using Linux 5.4. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)
* build: switch VERSION_REPO again to HTTPSPaul Spooren2022-03-201-1/+1
| | | | | | | | The maintainer-tools.git script still defaults to `http` while eveyrthing moved over to `https`. This commit switches VERSION_REPO again back to encrypted connections. Signed-off-by: Paul Spooren <mail@aparcar.org>
* OpenWrt v22.03: set branch defaultsPaul Spooren2022-03-201-2/+2
| | | | Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: bump 5.10 to 5.10.107John Audia2022-03-191-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.106John Audia2022-03-191-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.105John Audia2022-03-191-2/+2
| | | | | | | | | | | | | | | Updated default config with new sym (CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y). Manually rebased: generic/hack-5.10/220-arm-gc_sections.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* quilt.mk: fix typo in the Host sectionRosen Penev2022-03-191-1/+1
| | | | | | | | HOST_PATCH_DIR is used for host patches, not PATCH_DIR. Fixes refreshing patches with a custom HOST_PATCH_DIR. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 5.10 to 5.10.104John Audia2022-03-131-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* tools: zip: fetch SOURCE_DATE_EPOCH directlySungbo Eo2022-03-091-1/+0
| | | | | | | | | Remove "--mtime" option introduced in commit 18c9faa03211 ("tools: zip: add option for reproducible archives") and instead fetch SOURCE_DATE_EPOCH environment variable directly in the code. Ref: https://sourceforge.net/p/infozip/patches/25/ Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* build: image: use UTC for zip timestampSungbo Eo2022-03-091-2/+1
| | | | | | | | Zip uses DOS timestamp for mtime which is stored in local time and hence depends on the timezone of the build system. Force zip to use UTC timezone to make image builds more reproducible. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: bump 5.10 to 5.10.103Rui Salvaterra2022-03-051-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.102John Audia2022-03-011-2/+2
| | | | | | | | | | | | | | | Removed upstreamed: bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-011-2/+2
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* u-boot.mk: add LOCALVERSION (explicitly specify OpenWrt build)Josef Schlehofer2022-02-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For debugging purposes, we need to know if users are using modified U-boot versions or not. Currently, the U-boot version is somehow stripped. This is a little bit problematic when there are backported/wip/to-upstream patches. To make it more confusing, there was (before this commit) two U-boot versioning. U-boot compiled by OpenWrt build bots are missing ``Build:`` This is also the case when the U-boot is compiled locally. Example: ``` U-Boot SPL 2022.01 (Jan 27 2022 - 00:24:34 +0000) U-Boot 2022.01 (Jan 27 2022 - 00:24:34 +0000) ``` On the other hand, if you run full build, you can at least see, where it was compiled. Notice added ``Build:``. Example: ``` U-Boot 2022.01 (Jan 27 2022 - 00:24:34 +0000), Build: jenkins-turris-os-packages-burstlab-omnia-216 ``` In both cases, it is not clear to U-boot developers if it is an unmodified build. This is also caused that there is a missing ``.git`` file from U-boot folder, and so there is no history. It leads to that it can not contain suffix ``-dirty`` (uncommitted modifications) or even something else like number of commits, etc. [1] When U-boot is compiled as it should be, the version should look like this: ``U-Boot 2022.04-rc1-01173-g278195ea1f (Feb 11 2022 - 14:46:50 +0100)`` The date is not changed daily when there are new OpenWrt builds. This commit adds OpenWrt specific version, which could be verified by using strings. ``` $ strings bin/targets/mvebu/cortexa9/u-boot-omnia/u-boot-spl.kwb | grep -E "OpenWrt*" U-Boot SPL 2022.01-OpenWrt-r18942+54-cbfce92367 (Feb 21 2022 - 13:17:34 +0000) arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r18942+54-cbfce92367) 11.2.0 2022.01-OpenWrt-r18942+54-cbfce92367 U-Boot 2022.01-OpenWrt-r18942+54-cbfce92367 (Feb 21 2022 - 13:17:34 +0000) ``` [1] https://u-boot.readthedocs.io/en/latest/develop/version.html Reported-by: Pali Rohár <pali@kernel.org> Suggested-by: Karel Kočí <karel.koci@nic.cz> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* image-commands.mk: Use ERROR_MESSAGE for imagesize failsPaul Spooren2022-02-281-1/+1
| | | | | | | | | | | | | If a image is bigger than the device can handle, an error message is printed. This is usually silenced and silently ignored, making it harder to debug. While it's possible to run the build in verbose mode (via `make V=s`) and grep for *is too big*, it's more intuitive to print the error message directly. For that use the newly unlocked `$(call ERROR_MESSAGE,...)` definition which now also print in non-verbose mode. Fixes: FS#50 (aka #7604) Signed-off-by: Paul Spooren <mail@aparcar.org>
* verbose.mk: print ERROR messages in non-verbosePaul Spooren2022-02-281-5/+4
| | | | | | | | | | | | | | | | | | | Using `make -j9` only prints a subset of messages to follow the build process progressing. However this silently skips over errors which might be of interested. Using `make V=s` easily floods the terminal making it hard to find error messages between the lines. A compromise is the usage of `$(call ERROR_MESSAGE,...)` which prints a message in red. This function is silenced in the non-verbose mode, even if only used at a single place in `package/Makefile` where it notifies about a OPKG corner case. This commit moves the `ERROR_MESSAGE` definition outside of the `OPENWRT_VERBOSE` condition and print error messages in every mode. With this in place further error messages are possible. Signed-off-by: Paul Spooren <mail@aparcar.org>
* netfilter: add kmod-nft-tproxyYousong Zhou2022-02-281-0/+2
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter: add kmod-nft-socketYousong Zhou2022-02-281-0/+2
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxyYousong Zhou2022-02-281-6/+7
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: toplevel.mk: fix missing kconfig dependency trackingPetr Štetiar2022-02-221-1/+1
| | | | | | | | | | | Toplevel Make is not aware about changes in the `scripts/config/*conf` targets and this is causing issues for during update to that part of build tree, where one needs to handle this manually by either force rebuilding the targets or running `make config-clean`. Fix this by forcing the rebuild if necessary. Fixes: #9297 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 5.10 to 5.10.100John Audia2022-02-111-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.99John Audia2022-02-111-2/+2
| | | | | | | | | | | | | | | | | | | | Had to update generic defconfig (make kernel_menuconfig CONFIG_TARGET=generic) for this bump, but since that only modifies the target defined in .config, and since that target also needed to be updated for unrelated reasons, manually propagated the newly added symbol to the generic config. Removed upstreamed: pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.99&id=080f371d984e8039c66db87f3c54804b0d172329 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-111-2/+2
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* ramips: add support for ipTIME AX2004MSungbo Eo2022-02-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME AX2004M is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specifications: * SoC: MT7621A * RAM: 256 MiB * Flash: NAND 128 MiB * Wi-Fi: * MT7915D: 2.4/5 GHz (DBDC) * Ethernet: 5x 1GbE * Switch: SoC built-in * USB: 1x 3.0 * UART: J4 (115200 baud) * Pinout: [3V3] (TXD) (RXD) (GND) MAC addresses: | interface | MAC address | source | comment |-----------|-------------------|----------------|--------- | LAN | 58:xx:xx:00:xx:9B | | [1] | WAN | 58:xx:xx:00:xx:99 | | | WLAN 2G | 58:xx:xx:00:xx:98 | factory 0x4 | | WLAN 5G | 5A:xx:xx:40:xx:98 | | | | 58:xx:xx:00:xx:98 | config ethaddr | [1] Used in this patch as WLAN 5G MAC address with the local bit set Load addresses: * stock * 0x80010000: FIT image * 0x81001000: kernel image -> entry * OpenWrt * 0x80010000: FIT image * 0x82000000: uncompressed kernel+relocate image * 0x80001000: relocated kernel image -> entry Notes: * This device has a dual-boot partition scheme, but this firmware works only on boot partition 1. The stock web interface will flash only on the inactive boot partition, but the recovery web page will always flash on boot partition 1. Installation via recovery mode: 1. Press reset button, power up the device, wait >10s for CPU LED to stop blinking. 2. Upload recovery image through the recovery web page at 192.168.0.1. Revert to stock firmware: 1. Install stock image via recovery mode. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* include/meson: fix host build directoryRosen Penev2022-02-071-1/+1
| | | | | | | When using a non default MESON_HOST_BUILD_DIR, HOST_BUILD_DIR is not appropriate to use. This change matches the target configure section. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* netfilter: add kmod-nft-compatEtienne Champetier2022-02-021-0/+2
| | | | | | This modules is required by iptables-nft Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-011-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.95Rui Salvaterra2022-02-011-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.93Rui Salvaterra2022-02-011-2/+2
| | | | | | No patches required rebasing. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.175John Audia2022-02-011-2/+2
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* Revert "ramips: add support for ipTIME AX2004M"Stijn Tintel2022-02-011-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f4a79148f8cb ("ramips: add support for ipTIME AX2004M") seems to leak KERNEL_LOADADDR 0x82000000 to other devices, causing the to no longer boot. The leak is visible in u-boot: Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: MIPS OpenWrt Linux-5.10.92 Type: Kernel Image Compression: lzma compressed Data Start: 0x840000e4 Data Size: 10750165 Bytes = 10.3 MiB Architecture: MIPS OS: Linux Load Address: 0x82000000 Entry Point: 0x82000000 Normally, it should look like this: Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: MIPS OpenWrt Linux-5.10.92 Type: Kernel Image Compression: lzma compressed Data Start: 0xbfca00e4 Data Size: 2652547 Bytes = 2.5 MiB Architecture: MIPS OS: Linux Load Address: 0x80001000 Entry Point: 0x80001000 Revert the commit to avoid more people soft-bricking their devices. This reverts commit f4a79148f8cbb7dfbcddfb0c1128caec45a01596. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: add support for ipTIME AX2004MSungbo Eo2022-01-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME AX2004M is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specification: * SoC: MT7621A * RAM: 256 MiB * Flash: NAND 128 MiB * Wi-Fi: * MT7915D: 2.4/5 GHz (DBDC) * Ethernet: 5x 1GbE * Switch: SoC built-in * USB: 1x 3.0 * UART: J4 (115200 baud) * Pinout: [3V3] (TXD) (RXD) (GND) MAC address: | interface | MAC | source | comment |-----------|-------------------|----------------|--------- | LAN | 58:XX:XX:00:XX:9B | | [1] | WAN | 58:XX:XX:00:XX:99 | | | WLAN 2G | 58:XX:XX:00:XX:98 | factory 0x4 | | WLAN 5G | 5A:XX:XX:40:XX:98 | | | | | | | | 58:XX:XX:00:XX:98 | config ethaddr | [1] Used in this patch as WLAN 5G MAC address with the local bit set Load address: * stock * 0x80010000: FIT image * 0x81001000: kernel image -> entry * OpenWrt * 0x80010000: FIT image * 0x82000000: uncompressed kernel+relocate image * 0x80001000: relocated kernel image -> entry Installation via **recovery** mode: 1. Press reset button, power up the device, wait >10s for CPU LED to stop blinking. 2. Upload recovery image through the recovery web page at 192.168.0.1. Revert to stock firmware: 1. Install stock image via recovery mode. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: add support for ipTIME NAS1Sungbo Eo2022-01-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC. Specifications: * SoC: 88F6281 * RAM: 256 MiB * Flash: SPI NOR 16 MiB * SATA: 1x 3Gb/s * Ethernet: 1x 1GbE * USB: 1x 2.0 * Fan: 2 speed level * UART: JP1 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Notes: * There are several variants of the model name: "NAS-I", "NASI", "NAS1". Here "NAS1" is adopted for consistent naming scheme. * The reset button is also a USB copy button in stock FW, but in this patch the former is the only default behavior. Installation via web interface: 1. Flash sysupgrade image through the stock web interface. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: bump 5.4 to 5.4.174John Audia2022-01-281-2/+2
| | | | | | | | | | | | | | Removed upstreamed patches: layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.174&id=65816c1034769e714edb70f59a33bc5472d9e55f Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.173John Audia2022-01-281-2/+2
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* netfilter.mk: add conntrack support to nft bridgeEtienne Champetier2022-01-281-0/+1
| | | | | | | | | This allows to implement statefull bridge filtering As the uncompressed size is only 7.6k (arm64), just add nf_conntrack_bridge.ko to kmod-nft-bridge package Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* tools: build bash on macOS and use it for ipkg-buildFelix Fietkau2022-01-271-1/+1
| | | | | | | | | On macOS, system binaries silently drop the environment variables for injecting extra shared libraries (used by fakeroot). This is done for security reasons. Work around this by building bash from source, so that it gets an ad-hoc signature and does not have these restrictions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: increase scan depth for finding targetsFelix Fietkau2022-01-241-1/+1
| | | | | | This allows targets to be put into target/linux/feeds Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: switch to firewall4 by defaultPaul Spooren2022-01-191-4/+3
| | | | | | | This commit replaces firewall aka firewall3 with its nftables based successor firewall4. Signed-off-by: Paul Spooren <mail@aparcar.org>
* treewide: drop use of whichAnsuel Smith2022-01-173-4/+4
| | | | | | | | | | | | | | Ubuntu started to flag which as deprecated and it seems which is not really standard and may vary across Distro. Drop the use of which and use the standard 'command -v' for this simple task. Which is still present in the prereq if some package/script still use which. A utility script called command_all.sh is implemented that will just mimic the output of which -a. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* build: add HOST_CXXFLAGS for host buildSergey V. Lobanov2022-01-161-0/+1
| | | | | | | Added HOST_CXXFLAGS to specify CXXFLAGS during host-compile (e.g. to specify c++ standard: HOST_CXXFLAGS += -std=c++11) Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* kernel: bump 5.10 to 5.10.92Rui Salvaterra2022-01-161-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.91Rui Salvaterra2022-01-161-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.172John Audia2022-01-161-2/+2
| | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.171John Audia2022-01-161-2/+2
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* build: move Build/copy-file to image-commands.mkChristian Lamparter2022-01-151-0/+4
| | | | | | This is makro is present in more than one place. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: split kernel version to dedicated filesAnsuel Smith2022-01-133-4/+9
| | | | | | | | | | Move the kernel versions and hash to dedicated files. This makes kernel bump quicker and fix some annoying problem with rebasing when multiple kernel bump are proposed. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [Rebased on top of current master] Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.90Rui Salvaterra2022-01-071-2/+2
| | | | | | | | Add and enable a new kconfig knob to disable unprivileged eBPF by default. Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.170John Audia2022-01-071-2/+2
| | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 22:47:51 +0000