aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.4 to 5.4.179Hauke Mehrtens2022-02-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between 5.4.171 and 5.4.179. The following 3 patches do not apply any more: * target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch This was already integrated in kernel v5.4-rc1, it was never needed. * target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch * target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch I think these were done to fix the problem which was really fixed in commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio hogs") from v5.4.175 target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch Move fwnode_device_is_available to the same position as in kernel 5.10. target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus") Compile-tested: lantiq/xrx200, bcm27xx/bcm2710 Run-tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.171David Bauer2022-01-131-2/+2
| | | | | | | Compile-tested: ath79-generic ipq40xx-generic Run-tested: ath79-generic Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.4 to 5.4.168Hauke Mehrtens2021-12-281-2/+2
| | | | | | | | | All updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.163Hauke Mehrtens2021-12-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.158Hauke Mehrtens2021-11-071-2/+2
| | | | | | | | | | | | Removed upstreamed: generic/backport-5.4/790-v5.7-net-switchdev-do-not-propagate-bridge-updates-across.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.1: revert to branch defaultsHauke Mehrtens2021-10-251-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.1: adjust config defaultsv21.02.1Hauke Mehrtens2021-10-251-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.154Hauke Mehrtens2021-10-201-2/+2
| | | | | | | | | | | | Removed upstreamed: generic/backport-5.4/070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: prereq detect Python 3.10 for `python3` binaryPaul Spooren2021-10-121-2/+2
| | | | | | | | | | | While the binary `python3.10` is correctly detected by the build system the default `python3` binary is currently not detected if pointing to a Python 3.10 installation. Fix this by extending the grep regex. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 56ea2bf2eec431ccd3c566190a444ad63db39b65)
* prereq-build: recognize Python 3.10Marcin Juszkiewicz2021-10-081-0/+2
| | | | | | | | | Fedora 35 contains Python 3.10 as default version. Make use of it. Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> [fix commit subject] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit e1c03ca18519f9683f6bfce1795e58d99575d895)
* build: fix `which` detection on Fedora & MacOSPaul Spooren2021-10-081-1/+3
| | | | | | | | | | | | | Fix Fedora 34/35 issue where 'which' detection of 'which' wasn't working because Fedora use alias and proc Fixup of fca5ad55d2 prereq-build: fix `which` detection on Fedora Reported-by: Jani Partanen <rtfm@iki.fi> Suggest-by: Etienne Champetier <champetier.etienne@gmail.com> Tested-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 0d1ebf0d6d20f0439ab45b293f9daa7662c44ba6)
* kernel: bump 5.4 to 5.4.150Hauke Mehrtens2021-10-021-2/+2
| | | | | | | | | | | | | | | | | | Manually rebased: generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch Removed upstreamed: generic/backport-5.4/040-ARM-8918-2-only-build-return_address-if-needed.patch layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0: revert to branch defaultsHauke Mehrtens2021-09-011-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0: adjust config defaultsv21.02.0Hauke Mehrtens2021-09-011-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.143Hauke Mehrtens2021-08-291-2/+2
| | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.4/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch Removed upstreamed: mvebu/patches-5.4/100-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* prereq-build: require python3-distutilsAndre Heider2021-08-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Debian and Ubuntu ship a python3-minimal package which does not include the distutils module. This is not supported by upstream and can be considered a broken python distribution. In practice, many scripts depend on said module, and this is a reoccuring pain point for building various OpenWrt packages. Require and check for said module, enough time has been wasted on this. A list of just the most recent issues: https://github.com/openwrt/packages/pull/16304 https://github.com/openwrt/packages/pull/16027 https://github.com/openwrt/packages/pull/15443 https://github.com/openwrt/packages/pull/14394 https://github.com/openwrt/packages/pull/12909 https://github.com/openwrt/packages/issues/12443 https://github.com/openwrt/packages/pull/11035 https://github.com/openwrt/packages/issues/10993 Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 60af8d753343691c4a647bfc7c51ef6eb92df9f2)
* kernel: bump 5.4 to 5.4.142David Bauer2021-08-241-2/+2
| | | | | | | Compile-tested: ath79-generic ipq40xx-generic Run-tested: ipq40xx-generic Signed-off-by: David Bauer <mail@david-bauer.net>
* OpenWrt v21.02.0-rc4: revert to branch defaultsHauke Mehrtens2021-08-011-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0-rc4: adjust config defaultsv21.02.0-rc4Hauke Mehrtens2021-08-011-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.137Hauke Mehrtens2021-07-311-2/+2
| | | | | | | | | | | | Manually rebased generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch All others updated automatically. Compile-tested on: ramips/mt7621, armvirt/32 Runtime-tested on: ramips/mt7621, armvirt/32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.132Hauke Mehrtens2021-07-191-2/+2
| | | | | | | | | | | | Manually rebased layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch All others updated automatically. Compile-tested on: ramips/mt7621 Runtime-tested on: ramips/mt7621 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: ensure that dash isn't prepended twice to abi version suffixJo-Philipp Wich2021-07-111-1/+1
| | | | | | | | | | | | | | The ABIV_$(pkgname) variable already is formatted so return it as-is from the GetABISuffix macro and only filter through FormatABISuffix if we read the raw ABI version value from a version stamp file. This ensures that binary intra-package dependencies on ABI versioned libraries are properly formatted. Ref: https://github.com/openwrt/packages/issues/15871 Fixes: f6a03bff5b ("build: prepend ABI suffixes with a dash if package name ends with digit") Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit fbb9b1f8ed0d8a76dd989cc6c16a4e0fda2b6e74)
* build: prepend ABI suffixes with a dash if package name ends with digitJo-Philipp Wich2021-07-112-2/+8
| | | | | | | | | | | Ensure that ABI suffixes are separated with a dash from the package name if the name happens to end with a digit. This implementation detail got lost during the recent refactoring of the ABI_VERSION handling in buildroot. Ref: https://github.com/openwrt/packages/pull/14237#issuecomment-860473585 Fixes: c921650382 ("build: drop ABI version from metadata") Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit f6a03bff5bccdbf9165087bccbb35095903d05c6)
* kernel: bump 5.4 to 5.4.128Hauke Mehrtens2021-06-271-2/+2
| | | | | | | | | | | | | | | Manually rebased bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch Replaced with patch from Raspberry Pi kernel 5.10 patches mvebu/patches-5.4/002-PCI-aardvark-Don-t-rely-on-jiffies-while-holding-spi.patch Applied upstream All others updated automatically. Compile-tested on: ath79/generic, lantiq/xrx200, brcm27xx Runtime-tested on: ath79/generic, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0-rc3: revert to branch defaultsHauke Mehrtens2021-06-141-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0-rc3: adjust config defaultsv21.02.0-rc3Hauke Mehrtens2021-06-141-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.124Hauke Mehrtens2021-06-061-2/+2
| | | | | | | | | | | | | Manually rebased generic/hack-5.4/662-remove_pfifo_fast.patch ramips/patches-5.4/0048-asoc-add-mt7620-support.patch All others updated automatically. Compile-tested on: armvirt/64, x86/generic, ath79/generic, ramips/mt7621 Runtime-tested on: armvirt/64, x86/generic, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build/json: fix IMAGE_PREFIX and DEVICE_PACKAGESPaul Spooren2021-06-021-1/+1
| | | | | | | | | | | | These two variables were missing in the definition of DEFAULT_DEVICE_VARS which caused them to contain wrong values, messing up the resulting JSON files. This patch adds the two variables IMAGE_PREFIX and DEVICE_PACKAGES to DEFAULT_DEVICE_VARS. Suggested-by: Baptiste Jonglez <git@bitsofnetworks.org> Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: bump 5.4 to 5.4.123Kuan-Yi Li2021-05-301-2/+2
| | | | | | | | | | | | Removed because in upstream generic/pending-5.4/770-02-net-ethernet-mtk_eth_soc-fix-rx-vlan-offload.patch All others updated automatically. Runtime-tested on bcm27xx/bcm2711. Fixes: FS#3085 Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* build: kernel2minor: work around path length limitFrançois Chavant2021-05-301-2/+5
| | | | | | | | | | | | | | | When building for MikroTik devices the kernel2minor tool will sometimes fail with: Can't get lstat from kernel file!: No such file or directory. This is because kernel2minor expects paths no longer than 250 chars. To work around this the include/image-commands.mk has been modified to copy the kernel to a temporary file (/tmp/tmp.XXXXXXXXXX) before calling kernel2minor. Signed-off-by: François Chavant <francois@chavant.info> (cherry picked from commit 5a9608102b3c444d0c963255f9d016a1d5469d5d)
* OpenWrt v21.02.0-rc2: revert to branch defaultsHauke Mehrtens2021-05-291-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0-rc2: adjust config defaultsv21.02.0-rc2Hauke Mehrtens2021-05-291-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: avoid generating JSON info on missing imageDavid Bauer2021-05-261-2/+2
| | | | | | | | | | | | Previously, build would fail for targets containing devices with not initramfs image (such as mpc85xx-p1010). Only generate the JSON image info for the initramfs image when we have one to avoid breaking the builds. Fixes commit d3140d052964 ("build/json: generate json file for initramfs") Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 512229ce4967814a09ce202855e6b632d2e97a3c)
* build/json: generate json file for initramfsMoritz Warning2021-05-261-1/+34
| | | | | | | | | The initramfs images are missing from the profiles.json files. Signed-off-by: Moritz Warning <moritzwarning@web.de> [fix code by exporting device variables] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit d3140d05296461deddaaa8ca2ce4a4a97a320eff)
* kernel-defaults: fix external kernel build when user_headers is missingMatt Merhar2021-05-231-1/+3
| | | | | | | | Use an 'if' so the absence of $(LINUX_DIR)/user_headers doesn't make the line evaluate to false and cause the build to fail. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com> (cherry picked from commit cc76e34c10e57cb1a4f7971268a77aad2f24c8ca)
* kernel: bump 5.4 to 5.4.119Hauke Mehrtens2021-05-151-2/+2
| | | | | | | | | | | | | | | | | Removed because in upstream generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch ath79/patches-5.4/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch ramips/patches-5.4/999-fix-pci-init-mt7620.patch Manually rebased ath79/patches-5.4/0033-spi-ath79-drop-pdata-support.patch All others updated automatically. Compile-tested on: x86/64, ath79/generic Runtime-tested on: x86/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Extend checks on build prerequisites for building OpenWRT coreBas Mevissen2021-05-081-1/+12
| | | | | | | | | | | | | | OpenWRT requires a number of Perl modules to be installed. It wasn't checking on all of them. This patch adds checks for Perl FindBin, File::Copy, File::Compare and Thread::Queue modules. Failing to install these, will have the build break at some point. By adding these to the prereq-build.mk script, they are checked on forehand. Tested on a Fedora 33 and 34 (beta) that was freshly installed. Fedora appears to break up Perl modules into small packages that need to be installed for the build to succeed. Signed-off-by: Bas Mevissen <abuse@basmevissen.nl> (cherry picked from commit f68c9474acf9a65b5a9538db8e45c173462487e3)
* kernel: bump 5.4 to 5.4.117Hauke Mehrtens2021-05-071-2/+2
| | | | | | | | | All updated automatically. Compile-tested on: x86/64, armvirt/32, ath79/generic Runtime-tested on: x86/64, armvirt/32, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.114Hauke Mehrtens2021-05-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Removed because in upstream* mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch Manually rebased* generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch Added new backport* generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch All others updated automatically. The new backport was included based on this[1] upstream commit that will be mainlined soon. This change is needed because Eric Dumazet's check for NET_IP_ALIGN (landed in 5.4.114) causes huge slowdowns on drivers which use napi_gro_frags(). Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0-rc1: revert to branch defaultsHauke Mehrtens2021-04-191-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0-rc1: adjust config defaultsv21.02.0-rc1Hauke Mehrtens2021-04-191-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.111Hauke Mehrtens2021-04-111-2/+2
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches. The following patches were manually changed: * 610-netfilter_match_bypass_default_checks.patch * 611-netfilter_match_bypass_default_table.patch * 802-can-0002-can-rx-offload-fix-long-lines.patch * 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch * 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch * 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch * 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch * 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch The can-dev.ko model was moved in the upstream kernel. Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel ↵Felix Fietkau2021-04-041-0/+3
| | | | | | | | | modules This resolves issues uncovered by musl updates Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 9ac47ee46918c45b91f4e4d1fa76b1e26b9d57fe)
* kernel: bump 5.4 to 5.4.108Hauke Mehrtens2021-03-271-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: x86_64, ath79, lantiq Runtime-tested on: x86_64, ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.105Hauke Mehrtens2021-03-161-2/+2
| | | | | | | | | | | | | Refreshed all patches. The following patches were applied upstream: * 755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch * 831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch Compile-tested on: x86_64, ipq40xx, ath79 Runtime-tested on: x86_64, ipq40xx, ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* include: store ABIVersion in Packages indexPaul Spooren2021-03-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | With the existence of ABI versions there is no clean way to determine the package name without an attached ABI version. The Packages index is stored on device to know what packages are installed. The ABIVersion was recently removed in c921650382 "build: drop ABI version from metadata", while ABI versions still exists. This becomes a problem if a user tries to export installed packages via `ubus call rpcd-sys packagelist` which would return package names including the ABI version. Trying to find these packages in a later release with changes ABI version is impossible. This commits adds the `ABIVersion` field again. Knowing both the combined (SourceName + ABIVersion) and the `ABIVersion` it is possible to calculate the package `SourceName` without storing it in the on-device package list. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit fc5b101c06928884d2b0c42b11bf917d29538971) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.102Hauke Mehrtens2021-03-061-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ath79, lantiq, ipq40xx, x86_64 Runtime-tested on: ipq40xx, x86_64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: add which command to build requirementsPetr Štetiar2021-03-031-0/+3
| | | | | | | | | | | | | | | | | | | | `which` utility is not shipped by default for example on recent Arch Linux and then any steps relying on its presence fails, like for example following Python3 prereq build check: $ python3 --version Python 3.9.1 $ make /bin/sh: line 1: which: command not found ... Checking 'python3'... failed. So make `which` utility host build requirement. References: PR#3820 FS#3525 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 13069b1a1dcbef0bb9b42db98025fa9203283220)
* Revert "build: replace which with Bash command built-in"Clemens Fruhwirth2021-03-032-3/+3
| | | | | | | | | | | | This reverts commit c7aec47e5e3a3ff7b5fdaa11cd1e62cae6746acb. The original commit replaces 'which' with 'command'. Sadly most of them are not equivalent and for 'which -a', there is no easy replacements that would not reimplement PATH parsing logic. Hence revert. Keeping a dependency on which is absolutely fine. Signed-off-by: Clemens Fruhwirth <clemens@endorphin.org> (cherry picked from commit 1f5e7224868109a170a9248d18f8d2b6124e9c5a)
* build: fix checks for GCC11Petr Štetiar2021-03-031-4/+4
| | | | | | | | Fedora 34 already uses GCC11. Reported-by: Marcin Juszkiewicz <marcin-openwrt@juszkiewicz.com.pl> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit cae69d558135456976b8fc6cb08530d1358cf6d5)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 07:18:01 +0000