aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* OpenWrt v18.06.0-rc2: adjust config defaultsv18.06.0-rc2Jo-Philipp Wich2018-07-151-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* include/prereq-build.mk: explicitly check for -f flag when using busybox timeMatthias Schiffer2018-07-141-2/+2
| | | | | | | | On Debian, busybox does have a time applet, but it does not support the -f flag. Catch this in prereq check to give users to proper error message. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit b123921a92a957f08abb186e041aa38aa9328f3e)
* include/kernel-build.mk: fix kernel rebuild on backport patch changesMatthias Schiffer2018-07-141-1/+1
| | | | | | | | | An incorrect variable name was referenced in KERNEL_FILE_DEPENDS, leading to the omission of the backport-* patch dirs in the generation of the prepared stamp name. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 36fa1bbf6f510e57098edab3932015dc747bbd49)
* include/feeds.mk: rework generation of opkg distfeeds.confMatthias Schiffer2018-07-121-6/+5
| | | | | | | | Allow enabling/commenting/disabling each feed individually by using a tristate config symbol. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 16035a7dd370671670693af9ae63368ee4dd731f)
* include/feeds.mk: always add available feeds to PACKAGE_SUBDIRSMatthias Schiffer2018-07-121-5/+1
| | | | | | | | | | | | | | | | Setting CONFIG_FEED_... symbols combined two different effects: Disabling a feed in the generated opkg distfeeds.conf, and omitting the feed from PACKAGE_SUBDIRS. It does not make sense to omit built feeds from PACKAGE_SUBDIRS, as it will only lead to packages that can be enabled in .config (and that will consequently be built) not to be found during rootfs creation, breaking the build. All feeds that packages are emitted to should simply always be added to PACKAGE_SUBDIRS instead; the CONFIG_FEED_... only configure the generated distfeeds.conf like this. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 9af22f1ac9122b54700dd38f627fdd446e1109f4)
* kernel: bump 4.14 to 4.14.54 for 18.06Koen Vandeputte2018-07-121-2/+2
| | | | | | | | | | | | Refreshed all patches Reworked patches to match upstream: 335-v4.16-netfilter-nf_tables-add-single-table-list-for-all-fa.patch Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.111 for 18.06Koen Vandeputte2018-07-121-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* build: fix target metadata scan dependenciesFelix Fietkau2018-07-032-2/+8
| | | | | | | Move SCAN_DEPS to scan.mk to eliminate redundancy with scripts/feeds Add image/*.mk to SCAN_DEPS for targets to pick up newly added devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: ensure that iwinfo is selected when building for multiple devicesFelix Fietkau2018-07-031-0/+1
| | | | | | | extra_packages needs to be added there, like on profiles and target packages lists Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.52 for 18.06Stijn Segers2018-07-021-2/+2
| | | | | | | Compile-tested on: ramips/mt7621, x86/64. Run-tested on: ramips/mt7621. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: bump 4.9 to 4.9.110 for 18.06Stijn Segers2018-07-021-2/+2
| | | | | | Compile-tested on ar71xx. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* build: change version.mk defaults to OpenWrtJo-Philipp Wich2018-06-221-2/+2
| | | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commit 333e609703ff40a272b8f8832a8af682826fb572)
* OpenWrt v18.06.0-rc1: revert to branch defaultsJo-Philipp Wich2018-06-221-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* OpenWrt v18.06.0-rc1: adjust config defaultsv18.06.0-rc1Jo-Philipp Wich2018-06-221-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "LEDE v18.06.0-rc1: adjust config defaults"Jo-Philipp Wich2018-06-221-3/+3
| | | | | | | This reverts commit 97b1765a45499ecc56db44f79453d3c6040bb5e7. The tree is in an inconsistent state and we need to complete some rebranding. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "LEDE v18.06.0-rc1: revert to branch defaults"Jo-Philipp Wich2018-06-221-3/+3
| | | | | | | This reverts commit 55df39e684f8fde90c52212350062440dc6c9754. The tree is in an inconsistent state and we need to complete some rebranding. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* LEDE v18.06.0-rc1: revert to branch defaultsJo-Philipp Wich2018-06-221-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* LEDE v18.06.0-rc1: adjust config defaultsJo-Philipp Wich2018-06-221-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: add busybox support to `time` prereq-checkAndy Boyett2018-06-182-3/+4
| | | | | | | | | | | | | | | Busybox time supports the GNU time '-f' syntax used by the build time logging implemented in ff6e62b288c, however the prerequisite check added only works with GNU time installed as `time` or `gtime`. As busybox is a multicall binary, the name of the symlink setup by SetupHostCommand also must be changed from `gtime` to `time` to fix the value of argv[0]. This causes a number of shells (including bash) to use their builtin impelementation of time, so the sole invocation has been changed to use `env time` to use the value found on the $PATH. Signed-off-by: Andy Boyett <agb@agb.io> (cherry picked from commit 591780615b304fb4624e363135942e9ee8f6caa3)
* build: use busybox gzip compatible force optionMathew McBride2018-06-181-1/+1
| | | | | | | | | | | commit 138c763 ("build: add --force option to gzip in Build/gzip") added the --force flag to the gzip invocation. Under environments with busybox gzip (e.g Alpine Linux), this fails as busybox only recognizes "-f". Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit fba168f5745acac95db519a9984b62e3e508df6a)
* include/image-commands.mk: shorter version in Netgear factory headerHannu Nyman2018-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Shorten the version string in Netgear factory image header in order to enable u-boot TFTP recovery flash mode to work again. Strip 'r7210-14cb05909a' into 'r7210' in the Netgear image header by removing the hash (anything after "-"). background: Some Netgear routers have recently been unable to flash Openwrt factory image with the TFTP recovery flash mode provided by Netgear u-boot. That is due to over-long Openwrt version string overflowing into the router type string in u-boot code. Modern git versions produce 10-digit short hashes for the Openwrt main repo, and that causes the version string to be too long in the image header, breaking the image ID verification by the TFTP flash routine. (Other option could be to force a shorter hash in scripts/getver.sh, but as the problem only concerns Netgear routers, let's patch just them.) More detailed explanations in FS#1583 Tested with WNDR3800 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (cherry picked from commit dcfe2a461e4b06de6e2b23d29afebbb3c775f647)
* kernel: bump 4.14 to 4.14.50 for 18.06Koen Vandeputte2018-06-181-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.109 for 18.06Koen Vandeputte2018-06-181-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.49 for 18.06Koen Vandeputte2018-06-181-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86-64 Runtime-tested on: cns3xxx, imx6, x86-64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.108 for 18.06Koen Vandeputte2018-06-181-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.48 for 18.06Stijn Segers2018-06-071-2/+2
| | | | | | | | | | | | | | Refreshed patches. The following patches were upstreamed and have been deleted: * target/linux/lantiq/patches-4.14/0025-MIPS-lantiq-gphy-Remove-reboot-remove-reset-asserts.patch * target/linux/generic/pending-4.14/101-clocksource-mips-gic-timer-fix-clocksource-counter-w.patch * target/linux/generic/pending-4.14/103-MIPS-c-r4k-fix-data-corruption-related-to-cache-coherence.patch * target/linux/generic/pending-4.14/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch Compile-tested: ramips/mt7621, x86/64 Run-tested: ramips/mt7621 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: bump 4.9 to 4.9.106 for 18.06Stijn Segers2018-06-071-2/+2
| | | | | | | | | | | Refreshed patches. The following patches were upstreamed and have been deleted: * target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch * target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch * target/linux/generic/pending-4.9/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch * target/linux/generic/pending-4.9/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* build: add apend-uboot commandDavid Bauer2018-05-241-0/+4
| | | | | | | | This commit adds an append-uboot command to append U-Boot from the bin-directory. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 399495a952bf687d9c59226bddf4e73d3b42b30c)
* kernel: bump 4.14 to 4.14.43 for 18.06Koen Vandeputte2018-05-241-2/+2
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches Dropped upstreamed patches: 522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch 523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch 525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch 527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch updated patches: 524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch 030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718 Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.102 for 18.06Koen Vandeputte2018-05-241-2/+2
| | | | | | | | | | | Refreshed all patches Added new ARM64 symbol: ARM64_ERRATUM_1024718 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* build: prevent spurious package rebuilds under CONFIG_AUTOREMOVEJo-Philipp Wich2018-05-221-1/+1
| | | | | | | | | | | | | | | | | When CONFIG_AUTOREMOVE is enabled, the build system touches an additional ".autoremove" stamp file in the cleaned build directory. Since the autoremove stamp file is touched after the compile process completed, it ends up being the most recent file of the package build directory, causing the timestamp.pl check of depends.mk to erroneously declare the ".built" and ".prepared" stamp files as stale, triggering a forced clean-build submake process. Fix the problem by using the ".built" stamp file as modification time reference when touching the ".autoremove" stamp file. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit b287c82bed6673648a69be6c1cf84abe8885a3c4)
* OpenWrt v18.06: set branch defaultsJohn Crispin2018-05-151-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* build: log time taken by each packages/stepsEtienne Champetier2018-05-072-0/+5
| | | | | | | | | | The idea is to easily get the list of packages taking the most time to build, and see if we can improve them v1: Use SetupHostCommand as recommended by John v2: add space after 'time:', remove useless /usr/bin/time from SetupHostCommand Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kernel: bump 4.14 to 4.14.37Koen Vandeputte2018-04-301-2/+2
| | | | | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, octeon, ramips/mt7621, x86/64 Runtime-tested on: cns3xxx, imx6, octeon, ramips/mt7621, x86/64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Stijn Segers <foss@volatilesystems.org> [add extra tested targets to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* tools/zlib: move zlib build to toolsHauke Mehrtens2018-04-281-5/+0
| | | | | | | | | | | | | This allows us to link the other tools against our libz and we do not need the system zlib any more. Only the static linked library is copied to the staging directory so we have a statically linked library on all systems and not only on Linux. This also adds the new dependencies of the packages which are depending on zlib. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* build: add support for git submodules with CONFIG_SRC_TREE_OVERRIDEFelix Fietkau2018-04-271-1/+6
| | | | | | | Also work around an issue where git would store the modified workdir in the submodule git config files Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.36Koen Vandeputte2018-04-261-2/+2
| | | | | | | | | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Fixes for CVEs: CVE-2018-1108 CVE-2018-1092 CVE-2018-1094 CVE-2018-1095 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Stijn Segers <foss@volatilesystems.org>
* kernel: bump 4.9 to 4.9.96Kevin Darbyshire-Bryant2018-04-261-2/+2
| | | | | | | | | | | | | | | | | | Refresh patches, following required reworking: ar71xx/patches-4.9/930-chipidea-pullup.patch layerscape/patches-4.9/302-dts-support-layercape.patch sunxi/patches-4.9/0052-stmmac-form-4-12.patch Fixes for CVEs: CVE-2018-1108 CVE-2018-1092 Tested on: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Arjen de Korte <build+openwrt@de-korte.org>
* build: consolidate fake uImage header build commandsMathias Kresin2018-04-201-9/+9
| | | | | | | | | | | Merge the two existing functions and use a parameter for the type header field. It updates the syntax of the former mpc85xx fake ramdisk header command to be compatible with mkimage from u-boot 2018.03 and fixes the build error spotted by the build bot. Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: pass HOSTCXX to host builds as CXXFelix Fietkau2018-04-201-0/+1
| | | | | | Fixes cmake build on some systems that also have an older clang++ Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: fix uImage fake header commandMathias Kresin2018-04-191-1/+2
| | | | | | | | | | Use a syntax compatible with mkimage from u-boot 2018.03 to fix the build errors spotted by the build bot. The images are binary identical to the ones generated with mkimage from u-boot 2014.10. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.14 to 4.14.34Stijn Tintel2018-04-161-2/+2
| | | | | | | | | | | | | Refresh patches. Update patches that no longer apply: - backport/313-netfilter-remove-defensive-check-on-malformed-packet.patch - pending/642-net-8021q-support-hardware-flow-table-offload.patch Compile-tested: x86/64. Runtime-tested: x86/64. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* include/kernel.mk: build kmod packages with empty FILESMatthias Schiffer2018-04-121-4/+2
| | | | | | | | | | | kmod packages without FILES did not have an install step defined, leading to no package being built. This affected netfilter/iptables packages, which filter out builtin modules from FILES. Not building a package that it is selected in .config is problematic, as the generated empty package may be necessary to satisfy dependencies. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* iptables: split physdev match out as a separate packageMatthias Schiffer2018-04-091-1/+4
| | | | | | | Split physdev match out of ipt-extra to allow installing ipt-extra without pulling in br-netfilter. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include: extend SetupHostCommand macro to accept more argumentsJo-Philipp Wich2018-04-051-1/+2
| | | | | | | | | | | | | Commit d6d3db0543 added more gcc version probes, exceeding the argument limit of the SetupHostCommand macro, leading to failing GCC/LLVM tests on OS X. Extend the handled number of arguments to restore proper functionality. Fixes FS#1470 Fixes d6d3db0543 ("build: Improve GCC version detection") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: update kernel 4.14 to 4.14.32Hauke Mehrtens2018-04-031-2/+2
| | | | | | | | | | | | | The following patches are now included upstream: * 0052-MIPS-lantiq-fix-usb-clocks.patch * 0053-MIPS-lantiq-enable-AHB-Bus-for-USB.patch * 0060-lantiq-ase-enable-MFD-SYSCON.patch Closes: FS#1466 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* build: Improve GCC version detectionHauke Mehrtens2018-04-031-4/+8
| | | | | | | | | | This now makes sure that the beginning of the version number gets checked and "4.4.5" will not match was a supported version. GCC 8 and GCC 9 are now marked as supported, but we probably have to fix some problems for them. Closes: FS#1433 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update kernel 4.9 to version 4.9.91Hauke Mehrtens2018-03-311-2/+2
| | | | | | | | | | * Refreshed patches. * Deleted 210-Revert-led-core-Fix-brightness-setting-when-setting-.patch (was accepted upstream) * Deleted 812-pci-dwc-fix-enumeration.patch (was accepted upstream) Compile and run tested on lantiq Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: add support for MACCHIATObin (cortex-a72)Damir Samardzic2018-03-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Marvell MACCHIATObin, cortex-a72 based Marvell ARMADA 8040 Community board. Comes in two forms: Single Shot and Double Shot. Specifications: - Quad core Cortex-A72 (up to 2GHz) - DDR4 DIMM slot with optional ECC and single/dual chip select support - Dual 10GbE (1/2.5/10GbE) via copper or SFP 2.5GbE (1/2.5GbE) via SFP 1GbE via copper - SPI Flash - 3 X SATA 3.0 connectors - MicroSD connector - eMMC - PCI x4 3.0 slot - USB 2.0 Headers (Internal) - USB 3.0 connector - Console port (UART) over microUSB connector - 20-pin Connector for CPU JTAG debugger - 2 X UART Headers - 12V input via DC Jack - ATX type power connector - Form Factor: Mini-ITX (170 mm x 170 mm) More details at http://macchiatobin.net Booting from micro SD card: 1. reset U-Boot environment: env default -a saveenv 2. prepare U-Boot with boot script: setenv bootcmd "load mmc 1:1 0x4d00000 boot.scr; source 0x4d00000" saveenv or manually: setenv fdt_name armada-8040-mcbin.dtb setenv image_name Image setenv bootcmd 'mmc dev 1; ext4load mmc 1:1 $kernel_addr $image_name;ext4load mmc 1:1 $fdt_addr $fdt_name;setenv bootargs $console root=/dev/mmcblk1p2 rw rootwait; booti $kernel_addr - $fdt_addr' saveenv Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
* build: filter out kmod-ipt-offload from the default selection on targets ↵Felix Fietkau2018-03-301-0/+4
| | | | | | that do not support it Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 05:01:35 +0000