aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* ath79: add support for Buffalo BHR-4GRV2INAGAKI Hiroshi2018-08-091-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo BHR-4GRV2 is a wired router, based on Qualcomm Atheros QCA9558. Ported from ar71xx target. Specification: - Qualcomm Atheros QCA9558 - 64 MB of RAM - 16 MB of Flash - 5x 10/100/1000 Ethernet - QCA8337N - 4x LEDs, 2x keys - UART header on PCB - Vcc, TX, RX, GND from LED side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of BHR-4GRV2 2. Connect power cable to BHR-4GRV2 and turn on it 3. Access to "http://192.168.12.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click update ("更新実行") button 5. Wait ~120 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: remove linux 4.4 supportKoen Vandeputte2018-08-082-3/+1
| | | | | | No targets are using this one anymore Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* image: fix build without ucertDaniel Golle2018-08-081-1/+1
| | | | | | | | Make sure the Shell-expression returns true also in case of key-build.ucert being absent. Fixes commit 848b455d2e ("image: use ucert to append signature") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: use ucert to append signatureDaniel Golle2018-08-071-0/+6
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 4.14 to 4.14.61Koen Vandeputte2018-08-071-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.118Koen Vandeputte2018-08-071-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Revert "netfilter: separate IPv6 relevant kernel modules from IPv4"Jo-Philipp Wich2018-08-061-9/+5
| | | | | | | | | This reverts commit 42a3c6465a230a4e03f2a185f4db5ac57b89f673. The change was apparently never build-tested with all kmods enabled. I took a brief look but found no simple way to untangle this, so revert it. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netfilter: separate IPv6 relevant kernel modules from IPv4Rosy Song2018-08-061-5/+9
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* build: remove GNU time dependencyJo-Philipp Wich2018-08-052-6/+1
| | | | | | | | | | Replace the GNU time program invocation with a simple Perl script reporting the timing values. Since we require Perl anyway for the build system, we can as well use that instead of requiring a random GNU utility rarely installed by default. Fixes: ff6e62b288 ("build: log time taken by each packages/steps") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 4.14 to 4.14.60Koen Vandeputte2018-08-031-2/+2
| | | | | | | | | | | | Refreshed all patches Removed upstreamed patches: - 500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.117Koen Vandeputte2018-08-031-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* base-files: fix HOME_URL replaceChen Minqiang2018-08-021-1/+1
| | | | Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* kernel: bump 4.9 to 4.9.116Koen Vandeputte2018-08-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches Remove upstreamed patches. - 103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch - 403-mtd_fix_cfi_cmdset_0002_status_check.patch - 001-4.11-01-mtd-m25p80-consider-max-message-size-in-m25p80_read.patch - 001-4.15-08-bcm63xx_enet-correct-clock-usage.patch - 001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch - 900-gen_stats-fix-netlink-stats-padding.patch Introduce a new backported patch to address ext4 breakage, introduced in 4.9.112 - backport-4.9/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch This patch has been slightly altered to compensate for a new helper function introduced in later kernels. Also add ARM64_SSBD symbol to ARM64 targets still running kernel 4.9 Compile-tested on: ar71xx, bcm2710 Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* include/feeds.mk: fix distfeeds.conf without per-feed reposBjørn Mork2018-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 514a4b3e1b4e4 ("include/feeds.mk: rework generation of opkg distfeeds.conf") made the per-feed "base" repo unconditional, making the default configuration fail when PER_FEED_REPO is disabled: root@wrt1900ac-1:~# cat /etc/opkg/distfeeds.conf src/gz openwrt_core http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages src/gz openwrt_base http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base root@wrt1900ac-1:~# opkg update Downloading http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages/Packages.gz Updated list of available packages in /var/opkg-lists/openwrt_core Downloading http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages/Packages.sig Signature check passed. Downloading http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz *** Failed to download the package list from http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz Collected errors: * opkg_download: Failed to download http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz, wget returned 8. Cc: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: 514a4b3e1b4e ("include/feeds.mk: rework generation of opkg distfeeds.conf") Signed-off-by: Bjørn Mork <bjorn@mork.no> [whitespace/indentation fix] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 4.14 to 4.14.59Stijn Tintel2018-07-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop patch that was superseded upstream: ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch Drop upstreamed patches: - apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch - apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch - ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch - brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch - brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch - generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch - generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch - generic/pending/900-gen_stats-fix-netlink-stats-padding.patch In 4.14.55, a patch was introduced that breaks ext4 images in some cases. The newly introduced patch backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch addresses this breakage. Fixes the following CVEs: - CVE-2018-10876 - CVE-2018-10877 - CVE-2018-10879 - CVE-2018-10880 - CVE-2018-10881 - CVE-2018-10882 - CVE-2018-10883 Compile-tested: ath79, octeon, x86/64 Runtime-tested: ath79, octeon, x86/64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* build: fix ASLR for LTO packagesJulien Dusser2018-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix building packages with LTO when CONFIG_PKG_ASLR_PIE is enabled. Despite comment of PR lto/80838, it seems that GCC needs -fPIC on linker command line, even if all objects are -fPIC. This may change as PR lto/80838 is merged into 8.1 compile-tested: ar71xx, ath79 Fix commits: 6dac92a42e052f89971762173daabb7fd84742ef 8c11133c9de632dca69c8464f911d8e2716effe2 07940acc341ee9bb2887359f193625e48f36207e e7397eef69a20fc630148d0e597523e139d21c0c ef16a394d2b24a363b50b5b4720cb23fe156c9da ef96d1e34a990871c912938c336f51a510b1e32f 47b42137ce1e931ae5871952b1f98438396f5e07 73fc67b61480a3430d31de33478a1c0c2c364b9c 154c0c4006daf41e2cbb6c8b7ad5557f83dfea3e 804c51e1e661819c5a7532e66fb8a12166eef9a9 Signed-off-by: Julien Dusser <julien.dusser@free.fr>
* include/verbose.mk: Add sc to failure messageDaniel Engberg2018-07-301-1/+1
| | | | | | Add sc to build error message Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* build: do not override CCACHE_DIR when ccache is disabledJo-Philipp Wich2018-07-242-2/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: prereq-build.mk: fix gcc/g++ SetupHostCommand invocationJo-Philipp Wich2018-07-241-2/+2
| | | | | | | A missing comma caused the first command option to be considered part of the error message. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: do not alter global default package selection from profilesJo-Philipp Wich2018-07-211-1/+0
| | | | | | | | | | | | | | | | | This partly reverts ca32373c951c651f4fe5d8f99ddeb8d4f20bbe3e which lets profiles that suppress packages to alter the package selection for all devices of the target when building with CONFIG_TARGET_PER_DEVICE_ROOTFS. In particular, this caused the brcm47xx Edimax PS-1208MFG profile to disable mtd, dropbear, firewall and other essential packages for all brcm47xx/generic builds. To solve this problem, prevent profiles from mangling the global DEFAULT_PACKAGES selection and restrict the supression of negated packages to the local PACKAGE variable list only. Fixes ca32373c95 ("target.mk: let profile remove from DEFAULT_PACKAGES") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: fix compile error when a package includes itself in PROVIDESFelix Fietkau2018-07-201-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include/prereq-build.mk: explicitly check for -f flag when using busybox timeMatthias Schiffer2018-07-141-2/+2
| | | | | | | On Debian, busybox does have a time applet, but it does not support the -f flag. Catch this in prereq check to give users to proper error message. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/kernel-build.mk: fix kernel rebuild on backport patch changesMatthias Schiffer2018-07-141-1/+1
| | | | | | | | An incorrect variable name was referenced in KERNEL_FILE_DEPENDS, leading to the omission of the backport-* patch dirs in the generation of the prepared stamp name. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/feeds.mk: rework generation of opkg distfeeds.confMatthias Schiffer2018-07-121-6/+5
| | | | | | | Allow enabling/commenting/disabling each feed individually by using a tristate config symbol. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/feeds.mk: always add available feeds to PACKAGE_SUBDIRSMatthias Schiffer2018-07-121-5/+1
| | | | | | | | | | | | | | | Setting CONFIG_FEED_... symbols combined two different effects: Disabling a feed in the generated opkg distfeeds.conf, and omitting the feed from PACKAGE_SUBDIRS. It does not make sense to omit built feeds from PACKAGE_SUBDIRS, as it will only lead to packages that can be enabled in .config (and that will consequently be built) not to be found during rootfs creation, breaking the build. All feeds that packages are emitted to should simply always be added to PACKAGE_SUBDIRS instead; the CONFIG_FEED_... only configure the generated distfeeds.conf like this. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* verbose.mk: quote SUBMAKE options李国2018-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | build openwrt on centos 6 I should use devtoolset-3 to get gcc 4.9, but it fail when make menuconfig. so I have to give option HOSTCC='gcc -Wl,--copy-dt-needed-entries' to make. But it passed to sub make to HOSTCC=gcc as micro SUBMAKE expand to HOSTCC=gcc -Wl,--copy-dt-needed-entries. This patch fix this issue. make -C build menuconfig HOSTCC='gcc -Wl,--copy-dt-needed-entries' V='1' make: Entering directory `/work/openwrt/openwrt/build' /opt/rh/devtoolset-3/root/usr/libexec/gcc/x86_64-redhat-linux/4.9.2/ld: lxdialog/checklist.o: undefined reference to symbol 'acs_map' //lib64/libtinfo.so.5: error adding symbols: DSO missing from command line collect2: error: ld returned 1 exit status make[1]: *** [mconf] Error 1 make -s -C scripts/config all CC=gcc -Wl,--copy-dt-needed-entries: build failed. Please re-run make with -j1 V=s to see what's going on make: *** [scripts/config/mconf] Error 1 make: Leaving directory `/work/openwrt/openwrt/build' Signed-off-by: 李国 <uxgood.org@gmail.com>
* kernel: bump 4.14 to 4.14.54Koen Vandeputte2018-07-111-2/+2
| | | | | | | | | | | | Rereshed all patches Reworked patches to match upstream: 335-v4.16-netfilter-nf_tables-add-single-table-list-for-all-fa.patch Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* download.mk: enable DownloadMethod/github_archiveYousong Zhou2018-07-051-8/+14
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* scripts/dl_github_archive.py: rename from download.pyYousong Zhou2018-07-051-7/+7
| | | | | | | | | | | - Make the code more GitHub-specific - Requires mirror hash to work with .gitattributes - Use different API depending on whether PKG_SOURCE_VERSION is a complete commit id or other ref types like tags - Fix removing symbolic link - pre-clean dir_untar for possible leftovers from previous run Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* download.mk: add more commentsYousong Zhou2018-07-051-2/+5
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: bump 4.14 to 4.14.53Koen Vandeputte2018-07-041-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.111Koen Vandeputte2018-07-041-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* build: ASLR hardening use $(FPIC)Kevin Darbyshire-Bryant2018-07-031-1/+1
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* build: fix target metadata scan dependenciesFelix Fietkau2018-07-022-2/+8
| | | | | | | Move SCAN_DEPS to scan.mk to eliminate redundancy with scripts/feeds Add image/*.mk to SCAN_DEPS for targets to pick up newly added devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: ensure that iwinfo is selected when building for multiple devicesFelix Fietkau2018-07-021-0/+1
| | | | | | | extra_packages needs to be added there, like on profiles and target packages lists Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.52Koen Vandeputte2018-07-021-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.110Koen Vandeputte2018-07-021-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* download.mk: restore the old dl_method implementationYousong Zhou2018-06-291-1/+17
| | | | | | | | Seems like the python download.py dl_method call causes serious performance regression for fresh "make defconfig" as reported in FS#1621. GitHub tarball download will also be disabled with this Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* base-files: add menuconfig option for HOME_URLMathias Kresin2018-06-271-0/+5
| | | | | | | | | | Add a menuconfig option to set the HOME_URL exposed in /usr/lib/os-release independent from the LEDE_DEVICE_MANUFACTURER_URL. Fixes: FS#1123 Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: download code from github using archive APIYousong Zhou2018-06-271-31/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | A new python script scripts/download.py is added to fetch tarballs using GitHub archive API [1], then repack in a reproducible way same as the current DownloadMethod/git GitHub imposes a 60 reqs/hour rate limit on unauthenticated API access[2]. This affects fetching commit date for feeding tar --mtime= argument. However, observation indicates that archive download is NOT subject to this limit at the moment. In the rare cases where download fails because of this, we will falback to using DownloadMethod/git The missing piece in the GitHub API is that it cannot provide in the tarball dependent submodules's source code. In that case, the implementation will also fallback to using DownloadMethod/git [1] Get archive link, https://developer.github.com/v3/repos/contents/#get-archive-link [2] Rate limiting, https://developer.github.com/v3/#rate-limiting v2 <- v1: - allow passing multiple urls with --urls argument - add commit ts cache. can be helpful on retry Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq40xx: add support for the ZyXEL NBG6617Christian Lamparter2018-06-261-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ZyXEL NBG6617 Hardware highlights: SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz NOR: 32 MiB Macronix MX25L25635F ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN) USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button, WIFI/Rfkill Togglebutton, WPS Button LEDS: Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS Serial: WARNING: The serial port needs a TTL/RS-232 3.3v level converter! The Serial setting is 115200-8-N-1. The 1x4 .1" header comes pre-soldered. Pinout: 1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX first install / debricking / restore stock: 0. Have a PC running a tftp-server @ 192.168.1.99/24 1. connect the PC to any LAN-Ports 2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file into the tftp-server root directory and rename it to just "ras.bin". 3. power-cycle the router and hold down the the WPS button (for 30sek) 4. Wait (for a long time - the serial console provides some progress reports. The u-boot says it best: "Please be patient". 5. Once the power LED starts to flashes slowly and the USB + WPS LEDs flashes fast at the same time. You have to reboot the device and it should then come right up. Installation via Web-UI: 0. Connect a PC to the powered-on router. It will assign your PC a IP-address via DHCP 1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234) 2. Go to the "Expert Mode" 3. Under "Maintenance", select "Firmware-Upgrade" 4. Upload the OpenWRT factory image 5. Wait for the Device to finish. It will reboot into OpenWRT without any additional actions needed. To open the ZyXEL NBG6617: 0. remove the four rubber feet glued on the backside 1. remove the four philips screws and pry open the top cover (by applying force between the plastic top housing from the backside/lan-port side) Access the real u-boot shell: ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02" When the device is starting up, the user can enter the the loader shell by simply pressing a key within the 3 seconds once the following string appears on the serial console: | Hit any key to stop autoboot: 3 The user is then dropped to a locked shell. |NBG6617> HELP |ATEN x[,y] set BootExtension Debug Flag (y=password) |ATSE x show the seed of password generator |ATSH dump manufacturer related data in ROM |ATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations) |ATGO boot up whole system |ATUR x upgrade RAS image (filename) |NBG6617> In order to escape/unlock a password challenge has to be passed. Note: the value is dynamic! you have to calculate your own! First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env) to get the challange value/seed. |NBG6617> ATSE NBG6617 |012345678901 This seed/value can be converted to the password with the help of this bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors): - tool.sh - ror32() { echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) } v="0x$1" a="0x${v:2:6}" b=$(( $a + 0x10F0A563)) c=$(( 0x${v:12:14} & 7 )) p=$(( $(ror32 $b $c) ^ $a )) printf "ATEN 1,%X\n" $p - end of tool.sh - |# bash ./tool.sh 012345678901 | |ATEN 1,879C711 copy and paste the result into the shell to unlock zloader. |NBG6617> ATEN 1,0046B0017430 If the entered code was correct the shell will change to use the ATGU command to enter the real u-boot shell. |NBG6617> ATGU |NBG6617# Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* netfilter: add bpf match supportAlin Nastac2018-06-261-0/+1
| | | | | | | | | Add xt_bpf modules to {kmod-ipt,iptables-mod}-filter. Match using Linux Socket Filter. Expects a BPF program in decimal format. This is the format generated by the nfbpf_compile utility. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* kernel: bump 4.14 to 4.14.51Kevin Darbyshire-Bryant2018-06-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Refresh patches. Remove patch that can be reverse applied: mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch Update patch that no longer applied: ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch Compiled-tested-for: lantiq, ramips Run-tested-on: lantiq BT hh5a, ramips MIR3g Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Michael Yartys <michael.yartys@protonmail.com> Tested-by: Rosen Penev <rosenp@gmail.com>
* build: change version.mk defaults to OpenWrtJo-Philipp Wich2018-06-221-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* octeon: Add and set CPU type Octeon+ as defaultDaniel Engberg2018-06-201-0/+1
| | | | | | | | | | | | | | The lowest CPU type used by supported Octeon platform is Octeon+ (EdgeRouter Lite) while EdgeRouter Pro/ER-8 uses Octeon II which is backwards compatible with Octeon+. Sources: https://community.ubnt.com/t5/EdgeRouter/EdgeRouter-Pro-CPU/td-p/654599 https://www.cavium.com/octeon-II-CN68XX.html "OCTEON II family is fully software compatible with the widely-adopted OCTEON Plus family" Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* build: add busybox support to `time` prereq-checkAndy Boyett2018-06-182-3/+4
| | | | | | | | | | | | | | Busybox time supports the GNU time '-f' syntax used by the build time logging implemented in ff6e62b288c, however the prerequisite check added only works with GNU time installed as `time` or `gtime`. As busybox is a multicall binary, the name of the symlink setup by SetupHostCommand also must be changed from `gtime` to `time` to fix the value of argv[0]. This causes a number of shells (including bash) to use their builtin impelementation of time, so the sole invocation has been changed to use `env time` to use the value found on the $PATH. Signed-off-by: Andy Boyett <agb@agb.io>
* include/image-commands.mk: shorter version in Netgear factory headerHannu Nyman2018-06-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Shorten the version string in Netgear factory image header in order to enable u-boot TFTP recovery flash mode to work again. Strip 'r7210-14cb05909a' into 'r7210' in the Netgear image header by removing the hash (anything after "-"). background: Some Netgear routers have recently been unable to flash Openwrt factory image with the TFTP recovery flash mode provided by Netgear u-boot. That is due to over-long Openwrt version string overflowing into the router type string in u-boot code. Modern git versions produce 10-digit short hashes for the Openwrt main repo, and that causes the version string to be too long in the image header, breaking the image ID verification by the TFTP flash routine. (Other option could be to force a shorter hash in scripts/getver.sh, but as the problem only concerns Netgear routers, let's patch just them.) More detailed explanations in FS#1583 Tested with WNDR3800 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: bump 4.14 to 4.14.50Koen Vandeputte2018-06-181-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.109Koen Vandeputte2018-06-181-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.49Koen Vandeputte2018-06-181-2/+2
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86-64 Runtime-tested on: cns3xxx, imx6, x86-64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>