aboutsummaryrefslogtreecommitdiffstats
path: root/config
Commit message (Collapse)AuthorAgeFilesLines
* x86: Set default baud rate on Geode images to 115200David Woodhouse2017-02-171-1/+0
| | | | | | | | | | | Prior to commit 1496b95a0 ("x86: clean up default grub baudrate settings") we had three different baud rates for the Geode targets: 19200 for net5501, 38400 for alix2, and 115200 for Geos. It doesn't seem that there's a very good reason for varying from our default 115200 baud, so let's make the Geode target do that instead. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* build: add buildbot specific config option for setting defaultsFelix Fietkau2017-02-151-2/+12
| | | | | | | | | | This can be used to tweak the buildbot behavior without having to change buildbot's configuration. It will also allow us to add more aggressive clean steps (e.g. on toolchain changes), which would break developers' workflows if enable by default. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ccache, samba36: fix samba.org addresses to use httpsHannu Nyman2017-02-021-1/+1
| | | | | | | | | | | | samba.org has started to enforce https and currently plain http downloads with curl/wget fail, so convert samba.org download links to use https. Modernise links at the same time. Also convert samba.org URL fields to have https. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* x86: disable crashlogFelix Fietkau2017-01-131-1/+1
| | | | | | | | It could cause crashes with some forms of virtualization, and it is unlikely to work properly with most systems. It's safer to just disable it. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove obsolete parallel build related optionsFelix Fietkau2017-01-101-53/+0
| | | | | | Always use the main make jobserver, which has been the default for ages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add KERNEL_DEVMEM and KERNEL_DEVKMEMHauke Mehrtens2016-12-241-0/+14
| | | | | | | | | These options are needed to create /dev/mem or /dev/kmem . /dev/mem is needed by the io tool to access raw hardware memory, which is helpful when debugging and developing drivers. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org>
* x86: revert default root size back to 256 MBFelix Fietkau2016-12-151-2/+1
| | | | | | | | | | | 2 GB is overkill and was only added to allow unlimited ext4 resizing, which is a pretty rare use case. 256 MB allows resizing up to 256 GB, which should be good enough for almost all users. A lot of this is mostly irrelevant anyway, since you can just use squashfs + ext4 overlay. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add KERNEL_DEBUG_PINCTRL and KERNEL_DEBUG_GPIOHauke Mehrtens2016-12-101-0/+8
| | | | | | | | This makes it possible to activate the gpio and the pinctl debugging from LEDE menuconfig. Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uml: clean up the kernel config and add squashfs+ext4/f2fs supportFelix Fietkau2016-11-241-1/+1
| | | | | | Replaces plain ext4 images Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: bump default kernel partition size to 16MFelix Fietkau2016-11-091-1/+1
| | | | | | | This leaves more room for sysupgrade config data or for having multiple kernel images to choose from Signed-off-by: Felix Fietkau <nbd@nbd.name>
* config: ext4: increase x86 rootfs size to 2GB to support online resize2fsJo-Philipp Wich2016-10-271-1/+2
| | | | | | | | | | | | | | | | | | | The current default rootfs size of 256MB in conjunction with 4K blocks produces an ext4 filesystem which lacks the appropriate amount of backup GDT entries to support online-resizing. For x86 targets, increase the default rootfs size to 2048MB which allows online resizing the filesystem to up to 2TB which is the current theoretical maximum for LEDE, due to missing GPT support on the root block device. Note that the filesystem artefact will not occupy 2GB on the build system as the make_ext4fs utility uses sparse files to generate the filesystem images, so the actual disk usage is much lower. Furthermore the filesystem images are gzip compressed, shrinking them to only a few megabytes on the download server. Signed-off-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Michael Heimpold <mhei@heimpold.de>
* config: ext4: drop option to set maximum number of inodesJo-Philipp Wich2016-10-271-7/+0
| | | | | | | | | | | There is very little practical use to limit the number of available inodes on an ext4 filesystem and the make_ext4fs utility is able to calculate useful defaults by itself. Drop the option to make resulting ext4 filesystems more flexible by default. Signed-off-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Michael Heimpold <mhei@heimpold.de>
* config: enable shadow passwords unconditionallyMatthias Schiffer2016-09-261-3/+0
| | | | | | | | | | | | | Configurations without shadow passwords have been broken since the removal of telnet: as the default entry in /etc/passwd is not empty (but rather unset), there will be no way to log onto such a system by default. As disabling shadow passwords is not useful anyways, remove this configuration option. The config symbol is kept (for a while), as packages from feeds depend on it. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* images: bump default rootfs size to 256 MBFelix Fietkau2016-09-081-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: add sdcard image creation scriptJosua Mayer2016-09-021-1/+1
| | | | | | | | | | | | | | | | Added gen_mvebu_sdcard_img.sh to facilitate creating an fixed-size sdcard image, adding the bootloader and populating it with actual data. Added the required rules for creating a 4GB sdcard image according to this layout: p0: boot (fat32) p1: rootfs (squashfs) p2: rootfs_data (ext4) This should be generic to any mvebu boards that can boot from block storage. Added the new sdcard image to the Clearfog image profile. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* Add config symbols for kernel keyring supportNathaniel Wesley Filardo2016-09-021-0/+19
| | | | | | | | Enable selection of the kernel key retention framework and some of its additional facilities; see Documentation/security/keys.txt and security/keys/Kconfig for details Signed-off-by: Nathaniel Wesley Filardo <nwfilardo@gmail.com>
* apm821xx: use lzma compression for the initramfs imagesChristian Lamparter2016-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | The MR24's u-boot takes it sweet time decompressing the LZMA-packed initramfs image. A user reported that compared to the old gzip method in v2: it "takes a ton longer to decompress like 4\x the old boot time for decompression". This patch also fixes a issue with the WNDR4700's initramfs image getting to big and causing the following u-boot crash during the decompression: "Uncompressing Multi-File Image ... Error: inflate() returned -5 out-of-mem or overwrite error - must RESET board to recover" This patch fixes both issues by reverting the MR24's initramfs compression method back to gzip. And choosing to compress the initramfs within the initramfs image as LZMA by default. Cc: chrisrblake93@gmail.com Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* config: remove options for including kernel/dtb in rootfsFelix Fietkau2016-07-201-41/+0
| | | | | | These options were a big design flaw to begin with Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: make TARGET_ROOTFS_JFFS2 depend on USES_JFFS2Felix Fietkau2016-07-201-1/+1
| | | | | | | If jffs2 support was not enabled by the target, jffs2 are quite likely to be broken, so we shouldn't build them. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain: get rid of GCC_VERSION_5 config symbolFelix Fietkau2016-07-151-2/+2
| | | | | | Replace it with !GCC_VERSION_4_8 to be more future compatible Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: Move POSIX ACL and attr support options into submenuDaniel Dickinson2016-07-051-72/+75
| | | | | | | Make global options menuconfig cleaner by moving POSIX ACL and attr support options into a submenu. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
* kernel: Add option to make using filesystem ACL support the defaultDaniel Dickinson2016-06-301-0/+85
| | | | | | | This adds a configuration options that allows to make filesystem ACL support the default in the kernel, except for old nfs. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
* config: add a small_flash featureJohn Crispin2016-06-131-1/+1
| | | | | | this causes KALLSYMS to be off by default Signed-off-by: John Crispin <john@phrozen.org>
* kernel: add missing symbolDaniel Golle2016-05-161-0/+6
| | | | | | | Add missing symbol When building kernel with profiling enabled and ARM or ARM64 targets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: remove leftover dependenices on TARGET_rdcFelix Fietkau2016-05-121-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* global: introduce ALL_NONSHARED symbolJo-Philipp Wich2016-04-131-0/+5
| | | | | | | | Introduce a new symbol ALL_NONSHARED which selects all non-sharable packages by default. This option is mainly intented for buildbot setups to build the target dependant software subset only. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: don't add -fno-plt for ARCFelix Fietkau2016-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | Curent ARC toolchain fails to build libstdc++ if -fno-plt is used. Lots of following error messages appear: ------------------->8------------------ ... staging_dir/toolchain-arc_arc700_gcc-arc-2015.06_uClibc-1.0.9/arc-openwrt-linux-uclibc/bin/ld: BFD (GNU Binutils) 2.23.2 assertion fail elf32-arc.c:2786 collect2: error: ld returned 1 exit status ------------------->8------------------ In newer binutils (still in development) for ARC rewritten from scratch this seem to not happen, so once new binutils for ARC hit the street this patch might be reverted. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48642
* buildroot: add options to build the kernel for NFS bootFlorian Fainelli2016-02-011-0/+34
| | | | | | | | | Add the basic set of kernel options to allow it from mounting a NFS root and boot from it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 48590
* include/kernel: add custom USER/DOMAIN config optionsFelix Fietkau2016-01-281-0/+16
| | | | | | | | | | | | | | | These allow the generated kernel's build metadata to be defined explicitly. This metadata is reported, eg, at boot time and in `uname -a` on running systems. If the variables aren't configured, the current build system username and hostname are used as normal. The motivation for this option is to achive reproducible (bit-for-bit identical) kernel builds of official openwrt releases. Signed-off-by: bryan newbold <bnewbold@robocracy.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48541
* build: do not deselect CONFIG_USE_SSTRIP if CONFIG_DEBUG is enabledFelix Fietkau2016-01-261-2/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48504
* build: add -fno-plt to default cflags, it improves PIC code optimizationFelix Fietkau2016-01-241-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48470
* build: use sstrip by default for muslFelix Fietkau2016-01-181-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48313
* Configure IPv6 kernel options in config/Config-kernel.inFelix Fietkau2016-01-041-0/+23
| | | | | | | | | | | | | | | | | | | Revision 46834 changed IPv6 support from a module to builtin. But since the configuration of the IPv6 kernel options was left in package/kernel/linux/modules/netsupport.mk, this means that an empty kmod-ipv6 module was still being generated (not packaged). This patch moves the configuration of the IPv6 kernel options to config/Config-kernel.in to remove this last bit of the module. Note that CONFIG_IPV6_PRIVACY was dropped (enabled by default since Linux v3.13), so this option is no longer needed. See https://github.com/torvalds/linux/commit/5d9efa7ee99eed58388f186c13cf2e2a87e9ceb4 Signed-off-by: Arjen de Korte <arjen+openwrt@de-korte.org> SVN-Revision: 48132
* kernel: add support for KERNEL_CGROUP_PIDSJohn Crispin2015-10-261-0/+7
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47275
* cosmetic: remove trailing whitespacesLuka Perkov2015-10-151-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47197
* linux: make IPv6 builtin if selected (saves >30KB)Steven Barth2015-09-091-1/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46834
* gcc: remove version 4.9-linaroFelix Fietkau2015-09-061-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46798
* enable strong SSP / Stackprotector on gcc5Steven Barth2015-08-181-2/+2
| | | | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 46685
* build: disable kernel stack protector support for i386/x86_64Felix Fietkau2015-08-021-0/+1
| | | | | | | | | | | | When stack protector support is disabled in libc (always the case for !musl), gcc assumes that it needs to use __stack_chk_guard for the stack canary. This causes kernel build errors, because the kernel is only set up to handle TLS stack canaries. Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46543
* hardening: disable user-space SSP for !muslSteven Barth2015-06-291-0/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46146
* toolchain: add fortify-headers, enable FORTIFY_SOURCE by defaultSteven Barth2015-06-231-0/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46117
* gcc/musl: rework SSP-supportSteven Barth2015-06-221-2/+2
| | | | | | | | | | | Make musl provide libssp_nonshared.a and make GCC link it unconditionally if musl is used. This should be a no-op if SSP is disabled and seems to be the only reliable way of dealing with SSP over all packages due to the mess that is linkerflags handling in packages. Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46108
* kernel: mitigate cgroups config dependency changesFelix Fietkau2015-06-181-1/+1
| | | | | | | | | | | Memory Resource Controller no longer depends on Resource counters since Kernel version 4.0. 3.18 is the only still supported version needing Resource counters for MEMCG, thus declare the dependency only for that version. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 46024
* hardening: enable regular SSP support by defaultSteven Barth2015-06-171-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46020
* hardening: enable RELRO by defaultSteven Barth2015-06-161-0/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46004
* hardening: enable format security checking by defaultSteven Barth2015-06-161-1/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46003
* build: enable package list signing by defaultFelix Fietkau2015-05-051-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45614
* build: add integration for managing opkg package feed keysFelix Fietkau2015-04-061-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45286
* config: add an option to enable KPROBEJohn Crispin2015-04-011-0/+17
| | | | | | Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45212
* x86: clean up default grub baudrate settingsFelix Fietkau2015-03-291-4/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45113
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 03:57:21 +0000