aboutsummaryrefslogtreecommitdiffstats
path: root/config/Config-kernel.in
Commit message (Collapse)AuthorAgeFilesLines
* config: extend small_flash featureAlex Maclean2018-07-121-3/+8
| | | | | | | | | | Extend the small_flash feature to disable swap, core dumps, and kernel debug info, and change the squashfs block size to 1024KiB. Also change squashfs fragment cache to 2 for small_flash to ease memory usage. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* kernel: only optimized for size if small_flashMathias Kresin2018-07-121-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | Add a new config option to allow to select the default compile optimization level for the kernel. Select the optimization for size by default if the small_flash feature is set. Otherwise "Optimize for performance" is set. Add the small_flash feature flag to all (sub)targets which had the optimization for size in their default kernel config. Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new setting. Exceptions to the above are: - lantiq, where the optimization for size is only required for the xway_legacy subtarget but was set for the whole target - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have plenty of space and an optimization for size doesn't make much sense - rb532, which has 128MByte flash Signed-off-by: Mathias Kresin <dev@kresin.me>
* config: add config option for KERNEL_TASKSTATSJeremiah McConnell2018-07-071-0/+21
| | | | | | | | | | In order for monitoring tools such as atop and htop to track and report i/o data, kernel support for task statistics and io accounting is required. Add a config option to enable building this support in the kernel. Signed-off-by: Jeremiah McConnell <miah@miah.com>
* config: fix ARM64 dependency checkHauke Mehrtens2018-02-101-2/+2
| | | | | | The ARM64 CPUs use aarch64 config symbol, fix the depends lines. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: ase: turn off fpu emulator in default buildYousong Zhou2018-01-291-1/+1
| | | | | | | | | | It was only enabled when the target was added back in commit 9b321bc ("lantiq: add Amazon-SE subtarget") Leave pistachio alone as devices of this target are not likely have small_flash or low_mem constraint Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: add config option KERNEL_MIPS_FPU_EMULATORYousong Zhou2018-01-291-0/+5
| | | | | | | To make it more accessible for nodejs users to configure and run a build on mips target lacking hardware fpu Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: allow disabling multicast routing supportMatthias Schiffer2018-01-111-1/+16
| | | | | | | | Multicast routing support is not needed in most setups, and increases the size of the kernel considerably (>10K after LZMA). Add a config switch to allow disabling it. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: fix spelling in CONFIG_DEVTMPFS help textSascha Paunovic2017-12-111-1/+1
| | | | | | Change "ti" to "to", as that's the correct spelling. Signed-off-by: Sascha Paunovic <azarus@posteo.net>
* kernel: Make KERNEL_PERF_EVENTS selectableFlorian Fainelli2017-05-261-1/+1
| | | | | | | The kernel itself allows enabling/disabling CONFIG_PERF_EVENTS, so allow doing the same thing. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel: enable CRASH_DUMP on supported platformsDaniel Golle2017-05-201-0/+10
| | | | | | | While we have CRASHLOG on MIPS it makes sense to support 'classic' kexec-based CRASH_DUMP on x86 and arm platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: remove out of tree direct-io disable hackFelix Fietkau2017-04-261-4/+0
| | | | | | | Direct-IO support has to be enabled for the release build anyway, so this hack is not worth keeping Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: disable crashlogFelix Fietkau2017-01-131-1/+1
| | | | | | | | It could cause crashes with some forms of virtualization, and it is unlikely to work properly with most systems. It's safer to just disable it. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add KERNEL_DEVMEM and KERNEL_DEVKMEMHauke Mehrtens2016-12-241-0/+14
| | | | | | | | | These options are needed to create /dev/mem or /dev/kmem . /dev/mem is needed by the io tool to access raw hardware memory, which is helpful when debugging and developing drivers. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org>
* kernel: add KERNEL_DEBUG_PINCTRL and KERNEL_DEBUG_GPIOHauke Mehrtens2016-12-101-0/+8
| | | | | | | | This makes it possible to activate the gpio and the pinctl debugging from LEDE menuconfig. Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Add config symbols for kernel keyring supportNathaniel Wesley Filardo2016-09-021-0/+19
| | | | | | | | Enable selection of the kernel key retention framework and some of its additional facilities; see Documentation/security/keys.txt and security/keys/Kconfig for details Signed-off-by: Nathaniel Wesley Filardo <nwfilardo@gmail.com>
* kernel: Move POSIX ACL and attr support options into submenuDaniel Dickinson2016-07-051-72/+75
| | | | | | | Make global options menuconfig cleaner by moving POSIX ACL and attr support options into a submenu. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
* kernel: Add option to make using filesystem ACL support the defaultDaniel Dickinson2016-06-301-0/+85
| | | | | | | This adds a configuration options that allows to make filesystem ACL support the default in the kernel, except for old nfs. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
* config: add a small_flash featureJohn Crispin2016-06-131-1/+1
| | | | | | this causes KALLSYMS to be off by default Signed-off-by: John Crispin <john@phrozen.org>
* kernel: add missing symbolDaniel Golle2016-05-161-0/+6
| | | | | | | Add missing symbol When building kernel with profiling enabled and ARM or ARM64 targets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* buildroot: add options to build the kernel for NFS bootFlorian Fainelli2016-02-011-0/+34
| | | | | | | | | Add the basic set of kernel options to allow it from mounting a NFS root and boot from it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 48590
* include/kernel: add custom USER/DOMAIN config optionsFelix Fietkau2016-01-281-0/+16
| | | | | | | | | | | | | | | These allow the generated kernel's build metadata to be defined explicitly. This metadata is reported, eg, at boot time and in `uname -a` on running systems. If the variables aren't configured, the current build system username and hostname are used as normal. The motivation for this option is to achive reproducible (bit-for-bit identical) kernel builds of official openwrt releases. Signed-off-by: bryan newbold <bnewbold@robocracy.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48541
* Configure IPv6 kernel options in config/Config-kernel.inFelix Fietkau2016-01-041-0/+23
| | | | | | | | | | | | | | | | | | | Revision 46834 changed IPv6 support from a module to builtin. But since the configuration of the IPv6 kernel options was left in package/kernel/linux/modules/netsupport.mk, this means that an empty kmod-ipv6 module was still being generated (not packaged). This patch moves the configuration of the IPv6 kernel options to config/Config-kernel.in to remove this last bit of the module. Note that CONFIG_IPV6_PRIVACY was dropped (enabled by default since Linux v3.13), so this option is no longer needed. See https://github.com/torvalds/linux/commit/5d9efa7ee99eed58388f186c13cf2e2a87e9ceb4 Signed-off-by: Arjen de Korte <arjen+openwrt@de-korte.org> SVN-Revision: 48132
* kernel: add support for KERNEL_CGROUP_PIDSJohn Crispin2015-10-261-0/+7
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47275
* cosmetic: remove trailing whitespacesLuka Perkov2015-10-151-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47197
* kernel: mitigate cgroups config dependency changesFelix Fietkau2015-06-181-1/+1
| | | | | | | | | | | Memory Resource Controller no longer depends on Resource counters since Kernel version 4.0. 3.18 is the only still supported version needing Resource counters for MEMCG, thus declare the dependency only for that version. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 46024
* config: add an option to enable KPROBEJohn Crispin2015-04-011-0/+17
| | | | | | Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45212
* kernel: cleanup seccomp symbol selectionJohn Crispin2015-03-261-7/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45005
* build: remove obsolete references to cris and avr32Felix Fietkau2015-03-241-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44965
* kernel: Support kernel options required by systemdJohn Crispin2015-03-211-6/+28
| | | | | | | | | | | | | These kernel options are all likely to be widely useful in this modern age, but are immediately useful for systemd support. c.f. http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/sys-apps/systemd/systemd-9999.ebuild?&view=markup#l118 Adapted from a patch by Adam Porter. Signed-off-by: Jeff Waugh <jdub@bethesignal.org> SVN-Revision: 44929
* config: add function tracersJohn Crispin2015-03-181-0/+20
| | | | | | | | Adds menuconfig options for ftrace function tracers Signed-off-by: Bryan Forbes <bryan@reigndropsfall.net> SVN-Revision: 44878
* kernel: enable open by fhandle syscallsJohn Crispin2015-03-151-0/+6
| | | | | | | | | | | | | | | | | | | | This is needed by many services to function properly and as all modern distributions got it enabled, it starts to be a de-facto standard, i.e. user-space starts to silently depend on it. This also pulls in EXPORTFS, however, the kernel binary size increases only a little. On ARM systems comes down to 800 bytes uncompressed and about 200 bytes compressed size. On MIPS systems it's about 1.2 kB size increase of the LZMA compressed kernel. v2: use menuconfig option instead of just enabling the option Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44765
* config: disable kernel tracing on umlNicolas Thill2015-02-111-0/+1
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 44397
* config: enable EARLY_PRINTK on bcm53xx by defaultRafał Miłecki2015-01-161-0/+1
| | | | | | | | | It's useful for debugging and safe at the same time as we enable it per device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43980
* kernel: add SECCOMP to menuconfigJohn Crispin2015-01-081-0/+14
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43888
* Kconfig: Various typo/grammar/line-length fixes in Config*.in filesHauke Mehrtens2014-09-131-15/+16
| | | | | | | | | | | | | Non-functional changes to config/Config-*.in files, including: * spelling mistakes * inconsistent terminology * grammar * overly long lines in "help" components Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> SVN-Revision: 42519
* config: enable cgroup freezerLuka Perkov2014-09-101-1/+1
| | | | | | | | This option will be enabled by default only when cgroups support is enabled. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42464
* Disable crashlog for UMLSteven Barth2014-06-121-1/+1
| | | | SVN-Revision: 41153
* kernel: fix duplicate KERNEL_PERF_EVENTS with wrong dependencyFelix Fietkau2014-06-061-4/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41030
* kernel: add a config option for enabling /proc/slabinfoFelix Fietkau2014-05-251-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40858
* kernel: add a config option for /proc page monitoring (useful for detailed ↵Felix Fietkau2014-05-251-0/+3
| | | | | | | | memory usage info) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40855
* sparse: add as a new package selectable from the configJohn Crispin2014-04-121-0/+4
| | | | | | | | | | | | | This change does multiple things, all related to enable sparse usage as a static analysis tool selectable from the OpenWrt configuration: *add a KERNEL_SPARSE option in the config to add sparse to the kernel build (through the C=1 option usage) *add sparse as a new host tools. It will get selected automatically when the above option will be enabled Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> SVN-Revision: 40490
* make printk, crashlog and swap support configurableImre Kaloz2014-04-021-1/+14
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40361
* config: lxc: enable KERNEL_POSIX_MQUEUELuka Perkov2014-01-241-1/+1
| | | | | | | | | Recent lxc versions are not useful if this option is not enabled. That said, enable KERNEL_POSIX_MQUEUE by default when KERNEL_LXC_MISC is selected. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39385
* config: add KERNEL_DYNAMIC_DEBUG optionLuka Perkov2013-12-091-0/+12
| | | | | | | | | Useful when debugging kernel which uses this infrastructure, for example ubi/ubifs. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39007
* move menuconfig options into separate filesImre Kaloz2013-11-221-0/+426
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38895