aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* openvpn: adding key_direction to append_params.Brandon Koepke2017-02-031-2/+2
| | | | | | key_direction shows up as an openvpn option in the user-interface but does not end up in the /var/etc/openvpn*.conf file. Adding it to the list here fixed the issue for me. Signed-off-by: Brandon Koepke <bdkoepke@fastmail.com>
* generic: rtl8366rb: fix compatible stringMathias Kresin2017-02-034-4/+4
| | | | | | | Use a vendor prefix as it has to be for all not core driver. Update the compatible string in the device tree files accordingly. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix Sercomm NA930 compatible stringMathias Kresin2017-02-031-1/+1
| | | | | | | The Sercomm NA930 is not a mt7620a evaluation board and shouldn't use the eval board compatible string. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: remove Planex CS-QR10 sound device tree nodeMathias Kresin2017-02-031-11/+0
| | | | | | | | The comptible string is neither added by any LEDE patch nor exists in in the kernel. Drop the sound node which was obviously added accidentally with 9195d8da ("ramips: DTS rework"). Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: cleanup SPI flash device tree properties usageMathias Kresin2017-02-02110-116/+6
| | | | | | | | | Use only the jedec,spi-nor compatible string. Everything else either never worked or is only support to keep compatibility. Remove the linux,modalias property. It is obsolete since kernel 4.4. Signed-off-by: Mathias Kresin <dev@kresin.me>
* generic: mtd: update settings of mx25u3235fAndré Valentin2017-02-021-1/+1
| | | | | | | This patch enabled 4K, dual and quad read. Settings have been verified with a real device. Signed-off-by: André Valentin <avalentin@marcant.net>
* ipq806x: fixup nbg6817 internal mmc and switch configuration in DTSAndré Valentin2017-02-022-4/+1
| | | | | | | | | | | | | The setting mmc-ddr-1_8v in the platform dts leads to read errors. The device is unusable and system reboots in a loop. Because NBG6817 is the only mmc device, I removed it in base dts. The second change removes settings now present in base dts. The third change references was a wrong conversion of constants in the switch settings. Switch now initializes again. Signed-off-by: André Valentin <avalentin@marcant.net>
* kernel: bump to 4.4.46Koen Vandeputte2017-02-022-3/+3
| | | | | | | | | | Refreshed patches for all supported targets. Compile-tested on ar71xx, cns3xxx, imx6, mt7621, oxnas and x86/64. Run-tested on ar71xx, cns3xxx, imx6 and mt7621. Tested-by: Stijn Segers <francesco.borromini@inventati.org> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ubox: support quiet modprobe, support millisecond log timestamp accuracyJo-Philipp Wich2017-02-021-3/+3
| | | | | | | | | Update ubox to latest Git HEAD in order to import the following fixes: ac2d43e kmodloader: support '-q' quiet option f8d3d16 ubox: Add an option for more accurate timestamps in log Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath9k: add a warning to the tx99 config optionFelix Fietkau2017-02-021-1/+1
| | | | | | | | | Lots of users try random stuff when they encounter any kind of difficulty. I've had to debug a number of cases where people had enabled this option for no reason. Hopefully this warning will reduce the number of useless support cases. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: brcmfmac: backport wowlan netdetect fixesRafał Miłecki2017-02-024-2/+149
| | | | | | | | | | | | | | I needed a moment to figure out relation between this patchset and the nl80211: fix validation of scheduled scan info for wowlan netdetect It appears nl80211 commit will go on top of brcmfmac changes so it's safe to backport these patches. One patch that was excluded is commit 2a2a5d1835b6 ("brcmfmac: add .update_connect_params() callback") as it depends on missing commit 088e8df82f91 ("cfg80211: Add support to update connection parameters"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: backport PSM watchdog improvementsRafał Miłecki2017-02-022-0/+96
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: backport minor code cleanupsRafał Miłecki2017-02-029-1/+363
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: backport 4.10 fixes & typo fixRafał Miłecki2017-02-023-0/+111
| | | | | | This includes memory leak fix in initialization path. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: backport scheduled scan cleanup and chip supportRafał Miłecki2017-02-0218-11/+2200
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: backport some old patches from 2016Rafał Miłecki2017-02-028-8/+332
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: rename brcmfmac patches to use higher prefixRafał Miłecki2017-02-023-0/+0
| | | | | | There are more patches to backport that should go before these. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ccache, samba36: fix samba.org addresses to use httpsHannu Nyman2017-02-024-7/+8
| | | | | | | | | | | | samba.org has started to enforce https and currently plain http downloads with curl/wget fail, so convert samba.org download links to use https. Modernise links at the same time. Also convert samba.org URL fields to have https. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* scripts: get_source_date_epoch.sh: fix mercurial support, add mtime fallbackJo-Philipp Wich2017-02-021-2/+7
| | | | | | | | | | Add a fallback case to get_source_date_epoch.sh which reports the modification time of the script itself in case there is no SCM information available, e.g. when downloading .tar.gz or .zip tarballs produced by Github. Also fix the mercurial case while we're at it. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: make DHCPv6 viable for standalone dnsmasq installEric Luehrsen2017-02-022-29/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dnsmasq has sufficient services to meet the needs of DHCP and RA with IP6 for single router router users. This is the most common use for consumer routers. Its reenforced as most ISP tend to only DHCP-PD /64. dnsmasq has year over year demonstrated great flexibility in its option set, and support for off-standard DHCP clients. odhcpd has enhanced capabilities focused on IP6 such as DHCP/RA relay and NDP proxy. However, it is not as flexible in its option set. odhcpd is not as forgiving with off-standard DHCP clients. Some points may represent a long term TODO list, but it is the state currently. These changes make any such combination possible. Already odhcpd can be set as the main dhcp server. Now odhcpd can be removed or disabled and dnsmasq will take over if DHCPv6 compiled in. The existing DHCPv6 and RA UCI are translated into dnsmasq.conf. The changes focus on '--dhcp-range', '--dhcp-host', and '--dhcp-options'. DHCP host ID is least 16 bits [::1000-::FFFF], but leaves low range for typical infrastructure assignments. dnsmasq accepts DHCPv6 options in the tranditional '--dhcp-option' put they must be prefixed 'option6:'. dnsmasq will also discover SLAAC DNS entries from DHCPv4 clients MAC, and confirm with a ping at least renew. Long term TODO include improving use of dnsmasq relay options for DHCPv4 and DHCPv6 in parallel. It would also be possible to preconfigure DHCP-PD in host-with-options records for fixed infrastructure. Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com> [Jo-Philipp Wich: emit proper IPv6 hostid format in dhcp-host directive] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: expand 'add_local_hostname' fexibility including FQDNEric Luehrsen2017-02-022-23/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ref commit 612e2276b4a2f57fcbbe79b95bec4a46e89d748c ref commit ec63e3bf1312ab4c666f7417ca9844857214047f 'option add_local_hostname' scripted implementation statically assigns this host in auto generated host file at init. If IFUP or other signals do not occur, then address changes are not tracked. The script doesn't apply all the addresses at an interface. This may make logs obscure. The script only puts the bare host name (maybe not FQDN) in host file, but if '--exapandhosts' is enabled, then /etc/hosts entries will be suffixed, and "127.0.0.1 localhost" becomes "localhost.lan". dnsmasq provides an option to perform this function, but it is rather greedy. '--interface-name=<name>,<iface>' will assign the name to all IP on the specified interface (except link local). This is a useful feature, but some setups depend on the original restrictive behavior. 'option add_local_fqdn' is added to enhance the feature set, but if not entered or empty string, then it will default to original option and behavior. This new option has a few settings. At each increased setting the most detailed name becomes the PTR record: 0 - same as add_local_hostname 0 or disabled 1 - same as add_local_hostname 1 2 - assigns the bare host name to all IP w/ --dnsmasq-interface 3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface 4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface 'option add_wan_fqdn' is added to run the same procedure on inferred WAN intefaces. If an interface has 'config dhcp' and 'option ignore 1' set, then it is considered WAN. The original option would only run on DHCP serving interfaces. Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
* ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x)Tobias Wolf2017-02-023-3/+6
| | | | | | | | | | This activates the CONFIG_MIPS_APPENDED_RAW_DTB kernel configuration and configures the F5D8235 V1 target to use append-dtb for kernel creation instead of OWRTDTB. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de> [Jo-Philipp Wich: rewrap commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to arch/mips/ralinkTobias Wolf2017-02-021-0/+28
| | | | | | | | | | This commit introduces CONFIG_MIPS_APPENDED_RAW_DTB as an alternative to OWRTDTB. Both solutions can be used concurrently until all board configurations have been changed. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de> [Jo-Philipp Wich: rewrap commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: emit tagged switch configuration by defaultJo-Philipp Wich2017-02-021-1/+1
| | | | | | | | | | | | | | | | | | | Instead of only using tagged CPU port configurations when more than one VLAN is present on the switch, always emit tagged configurations unless a board explicitely opts out of this behaviour by using the previously introduced [0-9]u@netdev syntax. Emitting default tagged configurations has the following benefits: - Relation of switch vlans to netdevs is easier to understand, especially for multi-cpu-port switches - Adding additional VLANs (e.g. to break out a LAN port for other purposes) becomes easier as users are not forced to change the existing untagged VLAN to tagged and the existing ifname notation from ethX to ethX.Y anymore, drastly reducing the likelyhood of soft-bricks. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm63xx: board.d: request untagged switch config where applicableJo-Philipp Wich2017-02-021-2/+2
| | | | | | | | In order to prepare support for generating tagged switch configurations by default, explicitely request untagged configs for boards which do not already request tagging to retain default behaviour. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* imagebuilder: make submake invocations less verboseJo-Philipp Wich2017-02-021-4/+4
| | | | | | | Use silent make invocations for sub-makes like build_image or checksum to avoid bloating the IB output with non-status info. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* odhcp6c: fix PKG_SOURCE_URLHans Dedecker2017-02-011-1/+1
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: update to git HEAD versionHans Dedecker2017-02-011-5/+5
| | | | | | | | 3317c86 dhcpv6-ia: apply lease delete based on assignment bound state df50429 odhcpd: properly handle netlink messages (FS#388) 83d72cf odhcpd: fix coding style Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: fix BCM54612E PHY supportRafał Miłecki2017-02-011-14/+81
| | | | | | | This backports upstream commit 62e13097c46c ("net: phy: broadcom: rehook BCM54612E specific init") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath10k-firmware: revert faulty PKG_SOURCE_DATE change from 7cb27b46Felix Fietkau2017-02-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: update qca9984 firmware and board dataPavel Kubelun2017-02-011-5/+5
| | | | | | | | Fixes firmware crash in rare cases and a bug ath10k_pci 0001:01:00.0: received unexpected tx_fetch_ind event: in push mode for those who kept experiencing it after previous firmware update. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* mt76: update to the latest versionFelix Fietkau2017-02-0132-52/+38
| | | | | | | | Uses upstream code to parse DT supported band/frequency information. Update existing .dts files to the new format and remove unnecessary overrides. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: remove DT pcie nodes for GL-MT300A/NFelix Fietkau2017-02-012-26/+0
| | | | | | These devices don't have a secondary wifi chip Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rtl8366_smi: add linux 4.4 compatibilityFelix Fietkau2017-02-011-4/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is setFelix Fietkau2017-02-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: fix kernel api compatibility issuesFelix Fietkau2017-02-012-0/+108
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rotary-gpio-custom: depend on Linux 3.18 and 4.4 (will not work on newer ↵Felix Fietkau2017-02-011-1/+1
| | | | | | kernels) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* xtables-addons: update to version 2.12Felix Fietkau2017-02-011-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Support ath10k CT firmware for 9887 chipsets.Ben Greear2017-02-011-3/+41
| | | | | | | | | | | And, update support for 9880 chipsets. The new firmware fixes a regression with EAPOL 4/4 packets added in a recent commit. It also fixes a case where the firmware would improperly try to use STBC when configured for 1x1 (as 9887 always is). Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.Ben Greear2017-02-011-3/+3
| | | | | | | The driver had a bug when calculating the rateset. This resolves that and allows full VHT mcs rates on 2x2 hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* leds-apu2: add compatibility for linux 4.9Felix Fietkau2017-02-011-0/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gpio-nct5104d: add compatibility for linux 4.9Felix Fietkau2017-02-011-0/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: enable SMP for XRX200Felix Fietkau2017-02-013-2/+21
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/getver.sh: append short git hash based on upstream commitMagnus Kroken2017-02-011-1/+2
| | | | | | | | | | | The short git hash suffix printed by getver.sh is taken from the latest local commit, change this to use the hash from latest upstream commit if available. This is considered the intended behavior based on commit message a642a11faca87e2a7bddc1fadb54253e2fc26e84, introducing getver.sh. Signed-off-by: Magnus Kroken <mkroken@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gcc: remove obsolete uclibc patchFelix Fietkau2017-02-013-99/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: fix LAN MAC address for devices that use eth2 originallyRafał Miłecki2017-02-011-0/+6
| | | | | | | | We override default Ethernet interface with eth0 which often uses random MAC due to missing proper NVRAM entry. Fix this by manually assigning MAC in the config. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* toolchain/gcc: reduce source directory size by about 420 MBFelix Fietkau2017-02-011-0/+6
| | | | | | Remove gcc testsuite, ada and libjava (if not selected) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: keep recursive dependency check stampfiles up to dateFelix Fietkau2017-02-011-0/+3
| | | | | | | | | Since the main stamp file depends on the _check stampfile, the _check stampfile needs to be created on the first run as well. Fixes spurious rebuilds with CONFIG_AUTOREBUILD=y Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: fix usb port ledsMathias Kresin2017-02-011-10/+15
| | | | | | | | | | | | | | | | | | | All mvebu boards have three USB LEDs. The first one is used for the USB1 port. There are two LEDs related to the second USB port. The top (bar) LED gets bright in case any USB device is connected to the second USB port. If the connected device is an USB 3 (SuperSpeed) device, the small dot LED bellow the "bar" LED gets also bright. While at it, use a name for the USB LEDs that matches the names printed on the case. Fixes: FS#423, FS#425 Signed-off-by: Kabuli Chana <newtownbuild@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: backport bgmac support for external PHYsRafał Miłecki2017-01-315-4/+540
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 01:47:09 +0000