aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* nat46: Fix compile with kernel 5.4Hauke Mehrtens2020-02-281-0/+34
| | | | | | | nf_reset() was renamed to nf_reset_ct() in upstream Linux commit 895b5c9f206e ("netfilter: drop bridge nf reset from nf_reset)" Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Make kmod-rtc-pcf2123 depend on kmod-regmap-spiKoen Vandeputte2020-02-281-0/+1
| | | | | | | In kernel 5.4 kmod-rtc-pcf2123 depends on kmod-regmap-spi, add this missing dependency. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: Make kmod-nft-core depend on kmod-nf-natHauke Mehrtens2020-02-281-1/+1
| | | | | | | In kernel 5.4 kmod-nf-core depends on kmod-nf-nat, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Make kmod-fs-f2fs depend on kmod-nls-baseHauke Mehrtens2020-02-281-1/+1
| | | | | | Since kernel 5.4 kmod-fs-f2fs is depending on kmod-nls-base. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add of_touchscreen.ko to kmod-input-touchscreen-ads7846Hauke Mehrtens2020-02-281-1/+2
| | | | | | | kmod-input-touchscreen-ads7846 depends on of_touchscreen.ko since kernel 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Remove kmod-gigaset for kernel 5.4Hauke Mehrtens2020-02-281-1/+1
| | | | | | | gigaset was moved to staging in kernel 5.4, just deactivate it on recent kernel versions instead of adapting it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add roles.ko to kmod-usb-chipideaHauke Mehrtens2020-02-281-1/+2
| | | | | | kmod-usb-chipidea depends on roles.ko since kernel 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Make kmod-gpio-pca953x depend on kmod-regmap-i2cHauke Mehrtens2020-02-281-1/+1
| | | | | | In kernel 5.4 kmod-gpio-pca953x depends on kmod-regmap-i2c. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: module v4l2-common.ko was removedHauke Mehrtens2020-02-281-1/+1
| | | | | | | The content of v4l2-common.ko was merged into videodev.ko and it was removed in kernel 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Adapt moved crodic.ko moduleHauke Mehrtens2020-02-281-1/+2
| | | | | | The module was moved in the kernel, adapt OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add crypto libraries to modulesHauke Mehrtens2020-02-281-3/+8
| | | | | | | | | | In kernel 5.3 and 5.4 some crypto modules were split into two modules, one implementing the crypto algorithm and the other integrating it into the Linux crypto framework. Adapt OpenWrt to support this split. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Include xt_MASQUERADE for kernel 5.2 and laterKoen Vandeputte2020-02-281-1/+2
| | | | | | Instead of ip6t_MASQUERADE, include xt_MASQUERADE on kernel >= 5.2. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: mode_beet mode_transport mode_tunnel xfram modulesKoen Vandeputte2020-02-281-9/+6
| | | | | | | | This adds the new xfrm4_mode_beet, xfrm4_mode_transport, xfrm4_mode_tunnel and their IPv6 versions on kernel 5.4. These modules were newly added in kernel 5.2. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* x86: Update configurationHauke Mehrtens2020-02-283-99/+44
| | | | | | | The configuration was refreshed and KERNEL_TESTING_PATCHVER was set to make it easy to compile for kernel 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: Refresh patches on kernel 5.4Hauke Mehrtens2020-02-285-47/+120
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: copy kernel patches from 4.19 to 5.4Hauke Mehrtens2020-02-289-0/+1920
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add support for kernel 5.4Koen Vandeputte2020-02-28216-6794/+1537
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches were removed because they are integrated in the upstream kernel 5.4: * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch * pending-5.4/220-optimize_inlining.patch * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch Some bigger changes were done to this feature and we did not port this patch yet: * hack-5.4/207-disable-modorder.patch This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes: * hack-5.4/930-crashlog.patch A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations. * pending-5.4/304-mips_disable_fpu.patch - no crashlog support yet as a required file got deleted upstream - Removed patch below, which is now seen as a recursive dependency [1] - Removed patch below due to build error [2] - fix still required to avoid identical function def [3] - Fixes included from Blocktrron - Fixes included from Chunkeey - Fix included from nbd regarding "dst leak in Flow Offload" [1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch [2] target/linux/generic/hack-5.4/207-disable-modorder.patch [3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: copy kernel 4.19 code to 5.4Hauke Mehrtens2020-02-28228-0/+38475
| | | | | | | No changes were done to the patches while coping them. Currently they do not apply on top of kernel 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libubox: update to latest Git HEADJo-Philipp Wich2020-02-271-3/+3
| | | | | | | | 7da6643 tests: blobmsg: add test case 75e300a blobmsg: fix wrong payload len passed from blobmsg_check_array Fixes: FS#2833 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath79: also reduce spi-max-frequency for buffalo_wzr-hp-ag300hAdrian Schmutzler2020-02-271-2/+2
| | | | | | | | | | | In accordance to ebc090e420d1 ("ath79: reduce spi-max-frequency to 50 MHz") this also reduces the spi-max-frequency to 50 MHz for the last remaining device with higher frequency in ath79. This will save us from having a single special case that will require adjustment when the spi driver for this device is changed in the future. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Chuanhong Guo <gch981213@gmail.com>
* kirkwood: apply minor DTS style improvementsAdrian Schmutzler2020-02-274-20/+48
| | | | | | | | | | | | | | | This applies some minor DTS style improvements to the files kept in OpenWrt at the moment: - harmonize/improve LED/pinmux node names - harmonize empty lines between nodes - change "ok" to "okay" - some other minor formatting adjustments Since changes are only cosmetical, they are only applied to the "newer" DTS files for kernel 4.19. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kirkwood: convert DTS patches into plain DTS filesSungbo Eo2020-02-2716-1465/+1341
| | | | | | | | | | | Move DTS files newly created by patch files to files directory. This will make these files much more maintainable. Patching the kernel Makefile is unnecessary, as the DTS files specified in DEVICE_DTS will be compiled by OpenWrt buildroot anyway. Signed-off-by: Sungbo Eo <mans0n@gorani.run> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: reduce spi-max-frequency to 50 MHzAdrian Schmutzler2020-02-276-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The introduction of ebf0d8dadeca ("ath79: add new ar934x spi driver") made the SPI memory unusable on devices with very high spi-max-frequency (104 MHz). Here's how the actual clock is calculated: (AHB_CLK/((CLOCK_DIVIDER+1)*2)) where AHB_CLK is a fixed clock (e.g. 200MHz on AR9331) and CLOCK_DIVIDER is the parameter we can set. Highest clock according to this formula is AHB_CLK/2 (100MHz, but that didn't work in device tests). The next possible value is AHB_CLK/4 (50MHz). Speeds between 50 MHz and 100 MHz will be rounded down, so using values higher than 50 MHz does not provide any benefit. Consequently, this patch reduces spi-max-frequency for all devices with values higher than 50 MHz to 50 MHz (effectively, this only affects devices with 104 MHz before this patch). Tested on GL.inet GL-AR150: Boot fails with 104 MHz but is successful with both 50 MHz and 80 MHz (fast-read), where the latter two yield identical read speeds. Fixes: ebf0d8dadeca ("ath79: add new ar934x spi driver") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix spi-max-frequency for wAP G-5HacT2HnDRoger Pueyo Centelles2020-02-271-1/+1
| | | | | | | | | | The introduction of ebf0d8dade (ath79: add new ar934x spi driver) made the SPI memory unusable. Reducing the spi-max-frequency to a smaller value makes it work again. Tested on two MikroTik RouterBOARD wAP G-5HacT2HnD devices. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* base-files: add all buildinfo with INCLUDE_CONFIGXu Wang2020-02-272-2/+4
| | | | | | | | | | CONFIG_INCLUDE_CONFIG option is helpful for being able to rebuild the exact same firmware as you see on a live OpenWRT instance, but it's crucially missing feeds information, so we can't rebuild the exact same package versions. This commit fixes this by adding the remaining feeds (and version) buildinfo files to the image. Signed-off-by: Xu Wang <xwang1498@gmx.com>
* ppp: backport security fixesPetr Štetiar2020-02-264-1/+129
| | | | | | | | | | 8d45443bb5c9 pppd: Ignore received EAP messages when not doing EAP 8d7970b8f3db pppd: Fix bounds check in EAP code 858976b1fc31 radius: Prevent buffer overflow in rc_mksid() Signed-off-by: Petr Štetiar <ynezz@true.cz> Fixes: CVE-2020-8597 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "ppp: backport security fixes"Jo-Philipp Wich2020-02-264-129/+1
| | | | | | | | This reverts commit 215598fd03899c19a9cd26266221269dd5ec8cee since it didn't contain a reference to the CVE it addresses. The next commit will re-add the commit including a CVE reference in its commit message. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath79: add support for MikroTik RouterBOARD 922UAGS-5HPacDRoger Pueyo Centelles2020-02-268-3/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch ports support for the MikroTik RouterBOARD 922UAGS-5HPacD with a built-in 802.11ac High-Power radio (31dBm), which was already available in the ar71xx target. See https://mikrotik.com/product/RB922UAGS-5HPacD for more info. Specifications: - SoC: Qualcomm Atheros QCA9558 (720 MHz) - RAM: 128 MB - Storage: 128 MB NAND - Wireless: external QCA9882 802.11a/ac 2x2:2 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE-in 24V - SFP: 1x host - USB: 1x 2.0 type A - PCIe: 1x Mini slot (also contains USB 2.0 for 3G/LTE modems) - SIM slot: 1x mini-SIM Working: - Board/system detection - SPI and NAND storage - PCIe - USB type A host - Wireless - Ethernet - LEDs (user, phy0) - Reset button - Sysupgrade to/from ar71xx Not supported: - RSSI LEDs - SFP cage Installation methods: - Sysupgrade from ar71xx (it is advisable to use the -n option to wipe any previous settings), or - Boot the initramfs image via TFTP and then flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* rbextract: support devices with plain RLE caldataRoger Pueyo Centelles2020-02-262-2/+14
| | | | | | | | | | | | Old MikroTik devices have the RLE-encoded radio calibration data directly stored in the art (hard_config) partition, without LZO compression nor any preceding ERD magic bytes. This commit adds a fallback for these devices. Tested on the ath79 target with a MikroTik SXT 5nD r2 (SXT Lite5), only locally --not yet merged upstream--. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* kernel: x86_64: drop CALGARY properlyKevin Darbyshire-Bryant2020-02-251-2/+2
| | | | | | | Use correct config syntax of 'is not set' instead of just commenting the line Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mediatek: add latest fixes provided by MTKJohn Crispin2020-02-256-127/+113
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: x86_64: drop CALGARY IOMMUKevin Darbyshire-Bryant2020-02-251-2/+2
| | | | | | | | | | | | The calgary IOMMU was only used on high-end IBM systems in the early x86_64 age. This is an unlikely OpenWrt target and in fact upstream are looking to drop the driver entirely with the bonus that we no longer see: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: enhance wifi reloadJohn Crispin2020-02-251-1/+8
| | | | | | If the reconf call fails force a full restart of the radio. Signed-off-by: John Crispin <john@phrozen.org>
* hostapd: enhance wifi reloadJohn Crispin2020-02-252-18/+134
| | | | | | | Add a radio_config_id property. If the radio config changes return an error upon receiving the reconf call. Signed-off-by: John Crispin <john@phrozen.org>
* mt76: update to the latest versionFelix Fietkau2020-02-251-3/+3
| | | | | | | | 0a53dcda5203 mt76: mt7603: add upper limit for dynamic sensitivity minimum receive power 46e63c05f7d1 mt76: mt7603: enable dynamic sensitivity adjustment by default 81476f11b68c mt76: mt7615: fix antenna mask initialization in DBDC mode Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: diag: restore default trigger for 'boot' LEDPiotr Dymacz2020-02-243-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For devices without a dedicated 'diag' LED, we use sometimes one of other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade' stages. In some cases, at the same time these LEDs have defined default triggers in DTS using 'linux,default-trigger' property. Current 'diag' setup removes the trigger and turns off 'boot' LED after bootup. One of the examples of such device is TP-Link TL-WR841N v14 (ramips) which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag': aliases { led-boot = &led_wlan; led-failsafe = &led_wlan; led-upgrade = &led_wlan; }; [...] led_wlan: wlan { label = "tl-wr841n-v14:green:wlan"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default trigger defined in DTS is restored for 'diag' LED which isn't used for indicating 'running' stage. Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* hostapd: start hostapd/wpa_supplicant for all wiphy devicesPiotr Dymacz2020-02-242-2/+2
| | | | | | | | | | | | | | c888e17e06 ("hostapd: manage instances via procd instead of pidfile") added procd support for managing hostapd and wpa_supplicant daemons but at the same time limited wiphy names to 'phy*'. This brings back initial behaviour (introduced in 60fb4c92b6 ("hostapd: add ubus reload") and makes procd manage daemons for any wiphy device found in '/sys/class/ieee80211'. CC: Felix Fietkau <nbd@nbd.name> CC: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* umbim: move package to 'WWAN' submenuPiotr Dymacz2020-02-241-0/+1
| | | | | | | 'uqmi' was moved to 'WWAN' submenu in 9abdeee0b7. Let's be consistent and do the same with 'umbim'. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* mbedtls: use correct SPDX License Identifier and add License fileJosef Schlehofer2020-02-241-1/+2
| | | | | | | | | | License "GPL-2.0+" is deprecated License Identifier according to SPDX License list [1]. The correct one is GPL-2.0-or-later. While at it, also add the License file. [1] https://spdx.org/licenses/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* mbedtls: update to version 2.16.5Josef Schlehofer2020-02-241-2/+2
| | | | | | | | | | Changelog: https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.5-and-2.7.14-released Security advisory: https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2020-02 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* strace: update to version 5.5Josef Schlehofer2020-02-241-2/+2
| | | | | | | Changelog: https://strace.io/files/5.5/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: Sort generic configurationHauke Mehrtens2020-02-242-5/+5
| | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-4.19 /dev/null > target/linux/generic/config-4.19-new $ mv target/linux/generic/config-4.14-new target/linux/generic/config-4.14 $ ./scripts/kconfig.pl '+' target/linux/generic/config-4.14 /dev/null > target/linux/generic/config-4.14-new $ mv target/linux/generic/config-4.19-new target/linux/generic/config-4.19 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-atm: Fix compile warningHauke Mehrtens2020-02-241-1/+15
| | | | | | | | | | | | The function trace_on_exit() is given to atexit() as a parameter, but atexit() only takes a function pointer to a function with a void parameter. This problem was introduced when the on_exit() function was incompletely replaced by atexit(). Fixes: ba6c8bd6142f ("linux-atm: add portability fixes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: Use ath10k-ct version 5.4Hauke Mehrtens2020-02-246-2/+643
| | | | | | This makes ath10k-ct use the version based on kernel 5.4 by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: Update to version 2020-02-18Hauke Mehrtens2020-02-243-23/+23
| | | | | | This adds AP VLAN support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Allow IBSS mode and different beacon intervalsHauke Mehrtens2020-02-241-0/+29
| | | | | | | | ath10k-ct supports the combination to select IBSS (ADHOC) mode and different beacon intervals together. mac80211 does not like this combination, but Ben says this is ok, so remove this check. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rtl8812au-ct: Update to version 2020-01-12Hauke Mehrtens2020-02-241-3/+3
| | | | | | This fixes compile problems with kernel 5.4 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add missing reset-gpios for NanoStation Loco M (XW)Roger Pueyo Centelles2020-02-241-0/+1
| | | | | | | | When porting support from ar71xx to ath79, the reset-gpios option was missed. Due to a hardware bug, this would eventually leave the devices with RX-deaf Ethernet PHY. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* kernel: bump 4.19 to 4.19.106Koen Vandeputte2020-02-2410-105/+40
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 950-0786-leds-pca963x-Fix-open-drain-initialization.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kirkwood: remove kmod-i2c-mv64xxx from DEVICE_PACKAGESSungbo Eo2020-02-241-3/+1
| | | | | | | | | | Commit 9a1f441ac81c ("kirkwood: enable SoC drivers in the kernel config") enabled I2C_MV64XXX in the kernel config, and the subsequent commit 0d5ba94088ef ("orion: enable SoC drivers in the kernel config") removed kmod-i2c-mv64xxx package entirely. As the feature is now kernel built-in and the package does not exist anymore, we can safely remove kmod-i2c-mv64xxx from DEVICE_PACKAGES. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 00:22:07 +0000