aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* brcm2708: update to latest patches from the RPi foundationÁlvaro Fernández Rojas2019-08-021181-71541/+76419
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: add v4.19 supportJohn Crispin2019-08-0235-3/+13220
| | | | | | | | Bump the target to v4.19. Add a patch with additional eth driver fixes/features that MTK provided aswell as the driver for the new mt7530 switch. Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: fix HiveAP 121 PLL for 1000MDavid Bauer2019-08-011-1/+1
| | | | | | | | | | | | The Aerohive HiveAP 121 has the wrong PLL value set for Gigabit speeds, leading to packet-loss. 10M and 100M work fine. This commit sets the Gigabit Ethernet PLL value to the correct value, fixing packet loss. Confirmed with iperf and floodping. Signed-off-by: David Bauer <mail@david-bauer.net>
* ar71xx: really fix Mikrotik board detectionKoen Vandeputte2019-08-011-0/+1
| | | | | | | | | | | | | | | | | commit e09da0169a08 ("ar71xx: fix Mikrotik board detection") was generated based on testing a rb-912 board, on which detection failed. Testing on more hardware shows something fun: machine : MikroTik RouterBOARD 922UAGS-5HPacD machine : Mikrotik RouterBOARD 912UAG-5HPnD Both lowercase and uppercase are used. So ensure we support both now .. Fixes: e09da0169a08 ("ar71xx: fix Mikrotik board detection") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: fix typo in replaced symbolKoen Vandeputte2019-08-011-1/+1
| | | | | | | | Looks like a copy/paste error .. Fixes: a89b49bca4ec ("kernel: bump 4.19 to 4.19.62") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: fix nand init issues on some rb2011 devicesKoen Vandeputte2019-07-311-1/+5
| | | | | | | | | | | | | | | | | | | | While flashing lots of RB2011 devices, I noticed that some of them refused to boot properly, failing over the NAND parameters. Checking in detail shows that some device seem to use another NAND flash which only support standard 2048-byte pages, without 512-byte subpage support. This commit disables usage of these small subpage completely. Advantages: - Both NAND's with(out) subpage support are working now - The nand speed increases a bit (measured roughly 1%) in typical usecases Disadvantages: - The maximum storage capacity decreases by ~0.2% as small changes can consume a full page (2048 bytes) now. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* toolchain/musl: bump to version 1.1.23Koen Vandeputte2019-07-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | new features: - riscv64 port - configure now allows customizing AR and RANLIB vars - header-level support for new linux features in 5.1 major internal changes: - removed extern __syscall; syscall header code is now fully self-contained performance: - new math library implementation for log/exp/pow - aarch64 dynamic tlsdesc function is streamlined compatibility & conformance: - O_TTY_INIT is now defined - sys/types.h no longer pollutes namespace with sys/sysmacros.h in any profile - powerpc asm is now compatible with clang internal assembler changes for new POSIX interpretations: - fgetwc now sets stream error indicator on encoding errors - fmemopen no longer rejects 0 size bugs fixed: - static TLS for shared libraries was allocated wrong on "Variant I" archs - crash in dladdr reading through uninitialized pointer on non-match - sigaltstack wrongly errored out on invalid ss_size when doing SS_DISABLE - getdents function misbehaved with buffer length larger than INT_MAX - set*id could deadlock after fork from multithreaded process arch-specfic bugs fixed: - s390x SO_PEERSEC definition was wrong - passing of 64-bit syscall arguments was broken on microblaze - posix_fadvise was broken on mips due to missing 7-arg syscall support - vrregset_t layout and member naming was wrong on powerpc64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.62Koen Vandeputte2019-07-3174-2839/+187
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 023-0013-crypto-crypto4xx-fix-AES-CTR-blocksize-value.patch - 023-0014-crypto-crypto4xx-fix-blocksize-for-cfb-and-ofb.patch - 023-0015-crypto-crypto4xx-block-ciphers-should-only-accept-co.patch - 950-0252-staging-bcm2835_camera-Ensure-all-buffers-are-return.patch - 950-0253-staging-bcm2835-camera-Remove-check-of-the-number-of.patch - 950-0254-staging-bcm2835-camera-Handle-empty-EOS-buffers-whil.patch - 950-0489-staging-mmal-vchiq-Replace-spinlock-protecting-conte.patch - 0021-ARM-dts-gemini-Fix-up-DNS-313-compatible-string.patch - 049-v4.20-mips-remove-superfluous-check-for-linux.patch - 100-MIPS-fix-build-on-non-linux-hosts.patch - 303-MIPS-Fix-bounds-check-virt_addr_valid.patch - 0002-usb-dwc2-use-a-longer-AHB-idle-timeout-in-dwc2_core_.patch Altered patches: - 950-0267-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch - 700-net-add-qualcomm-mdio-and-phy.patch Fixes: - CVE-2019-3846 New symbol: - AX88796B_PHY Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.134Koen Vandeputte2019-07-318-99/+12
| | | | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 049-v4.20-mips-remove-superfluous-check-for-linux.patch - 303-MIPS-Fix-bounds-check-virt_addr_valid.patch Fixes: - CVE-2019-3846 - CVE-2019-3900 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.186Koen Vandeputte2019-07-3112-30/+30
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-3846 Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: bump SDMA firmware to 3.5Koen Vandeputte2019-07-311-0/+0
| | | | | | | | | | - add uart rom script address in header of sdma firmware to support the uart driver of latest kernel working well while old firmware assume ram script used for uart driver as NXP internal legacy kernel. - add multi-fifo SAI/PDM scripts. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: fix SOC version in compat string for A770Piotr Dymacz2019-07-311-1/+1
| | | | | | YunCore A770 is based on QCA9531, not QCA9533. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ath79: add support for ALFA Network AP121FPiotr Dymacz2019-07-311-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ath79: fix indent and alphabetical orderPiotr Dymacz2019-07-311-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ath79: add support for ALFA Network AP121FRoger Pueyo Centelles2019-07-314-0/+148
| | | | | | | | | | | | | This commit ports support for the ALFA Network AP121F, a pocket-size router with 1 Ethernet and 2.4 GHz WiFi based on the AR9331 SoC, to the ath79 target (it was already supported in ar71xx; see commit 0c6165d2 for more details). Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [pepe2k@gmail.com: fixed GPIO polarity, included USB support, changed DTS nodes order, moved WLAN LED trigger define to DTS, made U-Boot env partition writable] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* wireless-regdb: fix patch fuzzKevin Darbyshire-Bryant2019-07-301-1/+1
| | | | | | Refresh patches to tidy up some fuzz warnings Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* tools/patch: apply upstream patch for CVE-2019-13636Russell Senior2019-07-302-1/+109
| | | | | | | | | In GNU patch through 2.7.6, the following of symlinks is mishandled in certain cases other than input files. This affects inp.c and util.c. https://nvd.nist.gov/vuln/detail/CVE-2019-13636 Signed-off-by: Russell Senior <russell@personaltelco.net>
* scripts/ubinize-image.sh: fix buildbot breakagePetr Štetiar2019-07-301-1/+1
| | | | | | | | | | | | | | New Docker based buildslaves install just bare minimum of packages, thus not having bsdmainutils package installed which provides `hexdump` utility, leading to the following build breakage on buildbots: ubinize-image.sh: 12: /builder/scripts/ubinize-image.sh: hexdump: not found So this patch simply replaces `hexdump` with `od` utility provided by coreutils package, which should be likely available. Co-authored-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lantiq: use wpad-basic for boards with enough storageJohann Neuhauser2019-07-301-2/+2
| | | | | | | | | This commit selects wpad-basic for the FRITZ!Box 7312 and 7412 as wpad-mini is only selected on boards with small flash. Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de> [add short description] Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: fix indent in TP-Link TL-WR842N v3 DTS fileAdrian Schmutzler2019-07-301-1/+1
| | | | | | Convert leading spaces to tab to match rest of the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* wireless-regdb: fix Makefile indentationJohn Crispin2019-07-301-5/+5
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* iptables: fix connmark savedscp buildKevin Darbyshire-Bryant2019-07-291-16/+24
| | | | | | | Add <strings.h> for ffs() definition. Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "kmod-sched-cake: drop out of tree package, use kernel version"Kevin Darbyshire-Bryant2019-07-296-503/+42
| | | | | | This reverts commit 5c094ff660fd8e750ed1c1f38719a45065e77348. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "netsupport: move out sch_cake from kmod-sched"Kevin Darbyshire-Bryant2019-07-291-1/+1
| | | | | | This reverts commit b31f9190c3c9736f0f2a9fc810eba5b6f43a6b05. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ar71xx: fix Mikrotik board detectionKoen Vandeputte2019-07-291-1/+1
| | | | | | | | | | | Fix a typo in the machine type being extracted from /proc/cpuinfo which causes all Mikrotik board to be undetected properly. This lead to sysupgrade issues and probably some others too. Fixes: acf2b6c8881b ("ar71xx: base-files: fix board detect on new MikroTik devices") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: brcm: improve brcmfmac debugging of firmware crashesRafał Miłecki2019-07-282-1/+39
| | | | | | This provides a complete console messages dump. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcm: update brcmfmac 5.4 patchesRafał Miłecki2019-07-2810-23/+32
| | | | | | Use commits from wireless-drivers-next.git. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* toolchain/fortify-headers: Update to 1.1Kevin Darbyshire-Bryant2019-07-281-2/+2
| | | | | | Update fortify-headers to 1.1 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* tools/mklibs: update to 0.1.44 and convert to Python 3Daniel Golle2019-07-2611-22/+350
| | | | | | | | | | | | | | | | Since the switch to Python 3 build fails if CONFIG_USE_MKLIBS is set ("Strip unnecessary functions from libraries" in menuconfig) as mklibs hasn't been converted to run on Python 3. * update to most recent upstream version which brings some reproducibility fixes * converted to Python 3 using 2to3 * fixed mixed tab/spaces indentation * fixed use of string.* functions * some more minor fixes to make Python 3 happy Fixes commit 19938c8de7 ("build: switch to Python 3") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* tfa-layerscape: fix create_pbl and byte_swap host buildBiwen Li2019-07-263-2/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - make create_pbl and byte_swap as host tools - fix a bug that maybe use the cross compiler to compile create_pbl and byte_swap: # -a option appends the image for Chassis 3 devices in case of non secure boot aarch64-openwrt-linux-musl-gcc -Wall -Werror -pedantic -std=c99 -O2 -DVERSION=v1.5(release):reboot-10604-ge9216b3336 -D_GNU_SOURCE -D_XOPEN_SOURCE=700 -c -o create_pbl.o create_pbl.c cc1: note: someone does not honour COPTS correctly, passed 0 times LD create_pbl /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) create_pbl.o: error adding symbols: File in wrong format collect2: error: ld returned 1 exit status Makefile:43: recipe for target create_pbl failed make[4]: *** [create_pbl] Error 1 plat/nxp/tools/pbl_ch2.mk:45: recipe for target pbl failed make[3]: *** [pbl] Error 2 - add tfa- prefix to all tools in order to avoid future clashes with other toolnames Signed-off-by: Biwen Li <biwen.li@nxp.com> [added missing HOST_CFLAGS, added tfa- prefix to the tools] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: add support for Fon FON2601NOGUCHI Hiroshi2019-07-267-12/+406
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FON2601 is a wireless router. Specification: - SoC: Mediatek MT7620A (580MHz) - RAM: 128 MiB - ROM: 16 MiB SPI Flash - Wireless: for 11b/g/n (upto 300 Mbps): MT7620A built-in WMAC for 11a/n/ac (upto 867 Mbps): MT7662E - Ethernet LAN: 1 port, upto 100 Mbps - Ethernet WAN: 1 port, upto 1000 Mbps - USB: 1 port (USB 2.0 host) - LEDs: 4 (all can be controlled by SoC's GPIO) - buttons: 1 (Displayed as "WPS" on enclosure) - serial port: 57600n8 pins: Vcc(3.3V), Rx, Tx, GND (left to right, viewed from outside of board) Installation (only available via UART): 1. download sysupgrade binary image by wget command 2. write sysupgrade binary image to Flash command is: mtd write sysupgrade.bin firmware 3. reboot Important Notice: Only one button is displayed as "WPS" on enclosure. However, it is configured as "reset" (factory resetting feature). Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com> [removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* autotools.mk: autoreconf: fix missing install-shPetr Štetiar2019-07-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm trying to create a package for libgpiod, which uses AC_CONFIG_AUX_DIR macro, which is probably leading to the following configure error: autoreconf: running: /openwrt.git/staging_dir/host/bin/libtoolize --force OpenWrt-libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `autostuff'. OpenWrt-libtoolize: linking file `autostuff/ltmain.sh' OpenWrt-libtoolize: putting macros in `m4'. ... configure: error: cannot find install-sh, install.sh, or shtool in autostuff "."/autostuff >From the build output it's clear, that libtoolize isn't installing install-sh symlink, because libtoolize would install install-sh only if it's being run with --install parameter. Corresponding part in libtoolize: if $opt_install; then func_config_update config.guess \ "$pkgdatadir/config" "$auxdir" pkgconfig_header func_config_update config.sub \ "$pkgdatadir/config" "$auxdir" pkgconfig_header func_install_update install-sh \ "$pkgdatadir/config" "$auxdir" pkgconfig_header fi func_ltmain_update ltmain.sh \ "$pkgdatadir/config" "$auxdir" pkgconfig_header Adding --install parameter to libtoolize fixes this build issue: autoreconf: running: /openwrt.git/staging_dir/host/bin/libtoolize --install --force OpenWrt-libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `autostuff'. OpenWrt-libtoolize: linking file `autostuff/config.guess' OpenWrt-libtoolize: linking file `autostuff/config.sub' OpenWrt-libtoolize: linking file `autostuff/install-sh' OpenWrt-libtoolize: linking file `autostuff/ltmain.sh' OpenWrt-libtoolize: putting macros in `m4'. Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireless-regdb: set PKGARCH:=allPetr Štetiar2019-07-261-0/+1
| | | | | | | | As it's an architecture-independent binary file. Ref: https://github.com/openwrt/openwrt/pull/1521#issuecomment-514687053 Suggested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireless-regdb: prefer python provided by make variablePetr Štetiar2019-07-261-1/+1
| | | | | | Usage of predefined make variables is preferred. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireless-regdb: update to 2019.06.03Zachary Riedlshah2019-07-262-260/+8
| | | | | | | | | | | | | | Fixes build issues on a python3 host (issues with the print statement formatting in the current build). Includes 100-regdb-write-firmware-file-format-version-code-20.patch and other fixes. Closes bugs.openwrt.org/index.php?do=details&task_id=1605. Uses the tarball as requested. Signed-off-by: Zachary Riedlshah <git@zacharyrs.me>
* build: cleanup possibly dangling Python 2 host symlinkPetr Štetiar2019-07-262-0/+14
| | | | | | | | | | | | When bumping buildroot to Python 3, we need to assure, that Python symlink in staging bin directory points to Python >= 3.5 as well. We can't rely completly just on SetupHostCommand as its executed only in cases when the $(STAGING_DIR_HOST)/bin/python doesn't already exist, so we need to remove it before running SetupHostCommand. Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: switch to Python 3Petr Štetiar2019-07-262-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch switches Python used in buildroot to Python 3 as Python 2.x series is going to be EOL relatively soon[1]. "Being the last of the Python 2.x series, 2.7 will have an extended period of maintenance. Specifically, 2.7 will receive bugfix support until January 1, 2020. After the last release, 2.7 will receive no support." It seems like Python 3 is going to be needed in order to support Meson build system which has gained some traction recently. Build tested on following targets: ath79/generic imx6/generic ipq40xx/generic lantiq/xway layerscape/armv7 (broken) layerscape/armv8_32b (broken) layerscape/armv8_64b (broken) mvebu/cortexa72 ramips/mt7621 ramips/mt7620 sunxi/cortexa7 x86/64 Layerscape targets are unfortunately left broken as their ls-rcw firmware package uses Python 2 and converting it to Python 3 would take more then reasoanble amount of time (I've tried to fix it already) and would be better fixed by someone who can even run test it. Run tested on ath79 (Archer C7 v5), ipq40xx (nbg6617) and x86_64 (QEMU and apu2). 1. https://www.python.org/dev/peps/pep-0373/ Ref: PR#1937 Cc: Yangbo Lu <yangbo.lu@nxp.com> Cc: Mathew McBride <matt@traverse.com.au> Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* layerscape: convert to python3 for rcwYangbo Lu2019-07-263-82/+548
| | | | | | | | Python 2.7 will not be maintained past 2020. Let's convert to python3 for rcw. Also drop byte swapping since TF-A had been already used which handled byte swapping instead. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* tools/scons: switch to Python 3Petr Štetiar2019-07-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Build tested on ath79 with following packages from packages feed which build depends on scons. None of them build anymore as it seems, that the SConscripts are written for Python2. * packages/net/iotivity (KO, doesn't build even with latest 1.3.1 release) SyntaxError: invalid syntax File "/openwrt/build_dir/target-mips_24kc_musl/iotivity-1.2.1/build_common/SConscript", line 40 print "\nError: Current system (%s) isn't supported\n" % host LookupError: unknown encoding: string_escape: File "/home/petr/testing/openwrt/build_dir/target-mips_24kc_musl/iotivity-1.3.1/SConstruct", line 28: SConscript('build_common/SConscript') * packages/net/smartsnmpd (KO, seems dead, no commit since 2015): SyntaxError: Missing parentheses in call to 'print' File "/openwrt/build_dir/target-mips_24kc_musl/smartsnmpd-2014-08-13/SConstruct", line 156 print "Can't find liblua or liblua5.1!" * packages/utils/gpsd (KO, doesn't build even with latest 3.18.1 release): AttributeError: 'list' object has no attribute 'keys': File "/openwrt/build_dir/target-mips_24kc_musl/gpsd-3.18.1/SConstruct", line 1758: all_manpages = list(base_manpages.keys()) + list(python_manpages.keys()) Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/jungo-image: convert to Python 3 with 2-to-3Petr Štetiar2019-07-261-26/+26
| | | | | | Let's convert the script to Python 3. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/dl_github_archive.py: convert to Python 3 with 2-to-3Petr Štetiar2019-07-261-5/+5
| | | | | | Let's convert the script to Python 3. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tools/b43-tools/b43-fwsquash: convert to Python 3 with 2-to-3Petr Štetiar2019-07-261-3/+3
| | | | | | Let's convert the script to Python 3. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* openwrt-keyring: update to Git HEADJo-Philipp Wich2019-07-251-3/+3
| | | | | | | | | | | | | | 8080ef3 usign: add 19.07 release build pubkey e24fe0d usign: use distro agnostic comments 251ded7 usign: fix filename of Stijn's usign key 14f0efc gpg: update snapshots public signing key 14f845b gpg: replace my public GPG key 4f735b8 gpg: add OpenWrt 19.07 signing key 228f8da gpg: add OpenWrt 18.06 v2 signing key 36057d9 gpg: update LEDE 17.01 public signing key f2989ab Add my public GPG and usign key Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath79: remove lines-initial-states propertyDavid Bauer2019-07-252-2/+0
| | | | | | | | | The lines-initial-states property was an early attempt to set the latch bit of the shift register on driver probe. It is not implemented in the driver and was rejected upstream. The latch bit was always set by a GPIO hog, so this property is safe to drop. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: drop an empty case in 02_networkChuanhong Guo2019-07-251-4/+0
| | | | | | | There's an empty case in 02_network introduced by last commit. Drop it. Fixes: ee650ba46c ("ramips: remove needless setting of lan_mac to eth0 in 02_network") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: remove needless setting of lan_mac to eth0 in 02_networkAdrian Schmutzler2019-07-251-10/+4
| | | | | | | | | | | This removes superfluous lines like lan_mac=$(cat /sys/class/net/eth0/address) Since lan_mac only sets the MAC address for eth0.1, these lines can be safely removed as the address will be inherited from eth0 anyway. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: consistently use lower-case factory partition labelAdrian Schmutzler2019-07-259-26/+24
| | | | | | | | The vast majority of devices labels "factory" partition with lower case. Convert the small fraction with capital letter to that and merge another case in 02_network. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: consolidate MAC address cases in 02_networkAdrian Schmutzler2019-07-251-32/+15
| | | | | | | | This just merges some duplicate definitions and consolidates lines. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [merge duplicated cases for phicomm k2p]
* ramips: use kiB instead of B for IMAGE_SIZEAdrian Schmutzler2019-07-254-4/+4
| | | | | | | This cosmetical patch is just meant to make comparing/checking IMAGE_SIZE values easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove ralink_default_fw_size_xxx variablesAdrian Schmutzler2019-07-257-187/+182
| | | | | | | | | | | There are frequent examples of the ralink_default_fw_size_xxx variables being used to "roughly" set flash size without caring about the actual size of the firmware partition. To discourage this behavior, this patch removes the variables and just sets IMAGE_SIZE by its numeric value for each target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 17:18:05 +0000