aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* linux-firmware: update to version 20210315 and trim down broadcom FWJosef Schlehofer2021-12-293-33/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In there linux-firmware repository located in kernel, there were removed old broadcom firmware [1] as they seem to be likely vulnerable to KrØØk vulnerability (CVE-2019-15126), because Cypress released new versions and superseded by it. In OpenWrt, there is Makefile for cypress-firmware, which already provides the same named packages like it was in linux-firmware. For example, cypress-firmware-43455-sdio provides brcmfmac-firmware-43455-sdio [2]. Changelog between 2020118 and 20210315: 3568f96 (tag: 20210315) linux-firmware: Update firmware file for Intel Bluetooth AX210 9e96e50 linux-firmware: Update firmware file for Intel Bluetooth AX200 c8d0db5 linux-firmware: Update firmware file for Intel Bluetooth AX201 5e2a387 Merge tag 'iwlwifi-fw-2021-03-05-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware into main b0d3e31 rtw88: 8822c: Update normal firmware to v9.9.6 5a2fd63 iwlwifi: add new FWs from core59-66 release 4f54906 iwlwifi: update 9000-family firmwares 11b7607 iwlwifi: update 7265D firmware e425f76 Merge branch 'add-silabs-wf200' of github.com:jerome-pouiller/linux-firmware into main 5ecd13f Mellanox: Add new mlxsw_spectrum firmware xx.2008.2406 58fb90a linux-firmware: add frimware for mediatek bluetooth chip (MT7921) e576a1b rtw89: 8852a: add firmware v0.9.12.2 048a7cb WHENCE: add missing symlink for BananaPi M3 aa6c6e7 Add symlink for BananaPi M2 to brcmfmac43430-sdio config 58825f7 brcm: Fix Raspberry Pi 4B NVRAM file 520f71b silabs: add new firmware for WF200 f7915a0 amdgpu: add initial firmware for green sardine 80cb579 rtw88: RTL8822C: Update normal firmware to v9.9.5 b79d239 (tag: 20210208) Merge branch 'DG1-guc-huc-ADLS-dmc' of git://anongit.freedesktop.org/drm/drm-firmware into main 66970e1 Merge branch 'qcom-rb5' of https://github.com/lumag/linux-firmware into main cf6fc2b Mellanox: Add new mlxsw_spectrum firmware xx.2008.2304 391fd50 linux-firmware: add firmware for MT7921 c5e3240 rtw88: RTL8821C: Update firmware to v24.8 d33d2d8 linux-firmware: Update firmware file for Intel Bluetooth AX210 3027ae4 linux-firmware: Update firmware file for Intel Bluetooth AX200 13979c3 linux-firmware: Update firmware file for Intel Bluetooth AX201 348d8a9 i915: Add DMC v2.01 for ADL-S f33f1f7 i915: Add HuC v7.7.1 for DG1 6a422f5 i915: Add GuC v49.0.1 for DG1 df822a8 qcom: Add venus firmware files for VPU-1.0 11a1db1 qcom: Add SM8250 Compute DSP firmware e55248b qcom: Add SM8250 Audio DSP firmware da74cc6 qcom: add firmware files for Adreno a650 0578970 brcm: Link RPi4's WiFi firmware with DMI machine name. d528862 brcm: Add NVRAM for Vamrs 96boards Rock960 870b805 brcm: Update Raspberry Pi 3B+/4B NVRAM for downstream changes a28a590 cypress: Fix link direction 060ad8b cypress: Link the new cypress firmware to the old brcm files 0f0aefd brcm: remove old brcm firmwares that have newer cypress variants f580dc2 rtl_bt: Update RTL8822C BT(UART I/F) FW to 0x059A_25CB 7df2220 rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099a_7253 e79405d rtl_bt: Add firmware and config files for RTL8852A BT USB chip ef3813d rtl_bt: Update RTL8821C BT(USB I/F) FW to 0x829a_7644 646f159 (tag: 20201218) make AP6212 in bananpi m2 plus/zero work 28185ec linux-firmware: Update firmware file for Intel Bluetooth AX210 23da869 linux-firmware: Update firmware file for Intel Bluetooth AX200 2099248 linux-firmware: Update firmware file for Intel Bluetooth AX201 94de5e2 linux-firmware: Update firmware file for Intel Bluetooth 9560 27a3689 linux-firmware: Update firmware file for Intel Bluetooth 9260 5c3c4af Merge branch 'lt9611uxc' of https://github.com/lumag/linux-firmware into main aaed4a8 Merge branch 'v1.1.6' of https://github.com/irui-wang/linux_fw_vpu_v1.1.6 into main d8c9865 Merge branch 'master' of https://github.com/sampnimm/linux-firmware-BT into main 63ab3db linux-firmware: add firmware for Lontium LT9611UXC DSI to HDMI bridge 0fe0fe0 mediatek: update MT8173 VPU firmware to v1.1.6 1a08ec9 QCA : Updated firmware files for WCN3991 7455a36 Merge branch 'guc_v49' of git://anongit.freedesktop.org/drm/drm-firmware into main 7eb7fda linux-firmware: Update firmware file for Intel Bluetooth AX210 5cbf459 linux-firmware: Update firmware file for Intel Bluetooth AX210 c487f7d i915: Add GuC firmware v49.0.1 for all platforms d9ffb07 i915: Remove duplicate KBL DMC entry b362fd4 Mellanox: Add new mlxsw_spectrum firmware xx.2008.2018 bc9cd0b linux-firmware: Update AMD SEV firmware 54c797a amdgpu: add sienna cichlid firmware for 20.45 1340e9c amdgpu: update vega20 firmware for 20.45 b260c9c amdgpu: update vega12 firmware for 20.45 d683bd5 amdgpu: update vega10 firmware for 20.45 7c81cc2 amdgpu: update renoir firmware for 20.45 3619e57 amdgpu: update navi14 firmware for 20.45 68ce0fb amdgpu: update navi12 firmware for 20.45 e889b80 amdgpu: update navi10 firmware for 20.45 f4edc15 amdgpu: update raven2 firmware for 20.45 e71210f amdgpu: update raven firmware for 20.45 [1] https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=0f0aefd733f70beae4c0246edbd2c158d5ce974c [2] https://github.com/openwrt/openwrt/blob/eeda8652f1655d4f9c11e9c9f51ddcd3377d119a/package/firmware/cypress-firmware/Makefile#L124 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit ff2bb16730f629d54bde8ba85c75d8614741e3fd) (removed sinovoip_bananapi-m2-berry) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: ath10k: add support for Qualcomm Atheros QCA9377Josef Schlehofer2021-12-291-0/+17
| | | | | | | | | | Add firmware and board file for Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) recognized as [168c:0042]. This card supports standard 1x1 802.11ac Wave2, BT5, and MU-MIMO. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit b2656490855f2a90f8895079a9a3853af6512d83)
* firmware: intel-microcode: update to 20210608Tan Zien2021-12-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | intel-microcode (3.20210608.2) * Correct INTEL-SA-00442 CVE id to CVE-2020-24489 in changelog and debian/changelog (3.20210608.1). intel-microcode (3.20210608.1) * New upstream microcode datafile 20210608 (closes: #989615) * Implements mitigations for CVE-2020-24511 CVE-2020-24512 (INTEL-SA-00464), information leakage through shared resources, and timing discrepancy sidechannels * Implements mitigations for CVE-2020-24513 (INTEL-SA-00465), Domain-bypass transient execution vulnerability in some Intel Atom Processors, affects Intel SGX. * Implements mitigations for CVE-2020-24489 (INTEL-SA-00442), Intel VT-d privilege escalation * Fixes critical errata on several processors * New Microcodes: sig 0x00050655, pf_mask 0xb7, 2018-11-16, rev 0x3000010, size 47104 sig 0x000606a5, pf_mask 0x87, 2021-03-08, rev 0xc0002f0, size 283648 sig 0x000606a6, pf_mask 0x87, 2021-04-25, rev 0xd0002a0, size 283648 sig 0x00080664, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048 sig 0x00080665, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048 sig 0x000806c1, pf_mask 0x80, 2021-03-31, rev 0x0088, size 109568 sig 0x000806c2, pf_mask 0xc2, 2021-04-07, rev 0x0016, size 94208 sig 0x000806d1, pf_mask 0xc2, 2021-04-23, rev 0x002c, size 99328 sig 0x00090661, pf_mask 0x01, 2021-02-04, rev 0x0011, size 19456 sig 0x000906c0, pf_mask 0x01, 2021-03-23, rev 0x001d, size 19456 sig 0x000a0671, pf_mask 0x02, 2021-04-11, rev 0x0040, size 100352 * Updated Microcodes: sig 0x000306f2, pf_mask 0x6f, 2021-01-27, rev 0x0046, size 34816 sig 0x000306f4, pf_mask 0x80, 2021-02-05, rev 0x0019, size 19456 sig 0x000406e3, pf_mask 0xc0, 2021-01-25, rev 0x00ea, size 105472 sig 0x000406f1, pf_mask 0xef, 2021-02-06, rev 0xb00003e, size 31744 sig 0x00050653, pf_mask 0x97, 2021-03-08, rev 0x100015b, size 34816 sig 0x00050654, pf_mask 0xb7, 2021-03-08, rev 0x2006b06, size 36864 sig 0x00050656, pf_mask 0xbf, 2021-03-08, rev 0x4003102, size 30720 sig 0x00050657, pf_mask 0xbf, 2021-03-08, rev 0x5003102, size 30720 sig 0x0005065b, pf_mask 0xbf, 2021-04-23, rev 0x7002302, size 27648 sig 0x00050663, pf_mask 0x10, 2021-02-04, rev 0x700001b, size 24576 sig 0x00050664, pf_mask 0x10, 2021-02-04, rev 0xf000019, size 24576 sig 0x00050665, pf_mask 0x10, 2021-02-04, rev 0xe000012, size 19456 sig 0x000506c9, pf_mask 0x03, 2020-10-23, rev 0x0044, size 17408 sig 0x000506ca, pf_mask 0x03, 2020-10-23, rev 0x0020, size 15360 sig 0x000506e3, pf_mask 0x36, 2021-01-25, rev 0x00ea, size 105472 sig 0x000506f1, pf_mask 0x01, 2020-10-23, rev 0x0034, size 11264 sig 0x000706a1, pf_mask 0x01, 2020-10-23, rev 0x0036, size 74752 sig 0x000706a8, pf_mask 0x01, 2020-10-23, rev 0x001a, size 75776 sig 0x000706e5, pf_mask 0x80, 2020-11-01, rev 0x00a6, size 110592 sig 0x000806a1, pf_mask 0x10, 2020-11-06, rev 0x002a, size 32768 sig 0x000806e9, pf_mask 0x10, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806e9, pf_mask 0xc0, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806ea, pf_mask 0xc0, 2021-01-06, rev 0x00ea, size 103424 sig 0x000806eb, pf_mask 0xd0, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806ec, pf_mask 0x94, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906e9, pf_mask 0x2a, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906ea, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 102400 sig 0x000906eb, pf_mask 0x02, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906ec, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 103424 sig 0x000906ed, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 103424 sig 0x000a0652, pf_mask 0x20, 2021-02-07, rev 0x00ea, size 93184 sig 0x000a0653, pf_mask 0x22, 2021-03-08, rev 0x00ea, size 94208 sig 0x000a0655, pf_mask 0x22, 2021-03-08, rev 0x00ec, size 94208 sig 0x000a0660, pf_mask 0x80, 2020-12-08, rev 0x00e8, size 94208 sig 0x000a0661, pf_mask 0x80, 2021-02-07, rev 0x00ea, size 93184 * source: update symlinks to reflect id of the latest release, 20210608 intel-microcode (3.20210216.1) * New upstream microcode datafile 20210216 * Mitigates an issue on Skylake Server (H0/M0/U0), Xeon-D 21xx, and Cascade Lake Server (B0/B1) when using an active JTAG agent like In Target Probe (ITP), Direct Connect Interface (DCI) or a Baseboard Management Controller (BMC) to take the CPU JTAG/TAP out of reset and then returning it to reset. * This issue is related to the INTEL-SA-00381 mitigation. * Updated Microcodes: sig 0x00050654, pf_mask 0xb7, 2020-12-31, rev 0x2006a0a, size 36864 sig 0x00050656, pf_mask 0xbf, 2020-12-31, rev 0x4003006, size 53248 sig 0x00050657, pf_mask 0xbf, 2020-12-31, rev 0x5003006, size 53248 * source: update symlinks to reflect id of the latest release, 20210216 intel-microcode (3.20201118.1) * New upstream microcode datafile 20201118 * Removes a faulty microcode update from release 2020-11-10 for Tiger Lake processors. Note that Debian already had removed this specific falty microcode update on the 3.20201110.1 release * Add a microcode update for the Pentium Silver N/J5xxx and Celeron N/J4xxx which didn't make it to release 20201110, fixing security issues (INTEL-SA-00381, INTEL-SA-00389) * Updated Microcodes: sig 0x000706a1, pf_mask 0x01, 2020-06-09, rev 0x0034, size 74752 * Removed Microcodes: sig 0x000806c1, pf_mask 0x80, 2020-10-02, rev 0x0068, size 107520 intel-microcode (3.20201110.1) * New upstream microcode datafile 20201110 (closes: #974533) * Implements mitigation for CVE-2020-8696 and CVE-2020-8698, aka INTEL-SA-00381: AVX register information leakage; Fast-Forward store predictor information leakage * Implements mitigation for CVE-2020-8695, Intel SGX information disclosure via RAPL, aka INTEL-SA-00389 * Fixes critical errata on several processor models * Reintroduces SRBDS mitigations(CVE-2020-0543, INTEL-SA-00320) for Skylake-U/Y, Skylake Xeon E3 * New Microcodes sig 0x0005065b, pf_mask 0xbf, 2020-08-20, rev 0x700001e, size 27648 sig 0x000806a1, pf_mask 0x10, 2020-06-26, rev 0x0028, size 32768 sig 0x000806c1, pf_mask 0x80, 2020-10-02, rev 0x0068, size 107520 sig 0x000a0652, pf_mask 0x20, 2020-07-08, rev 0x00e0, size 93184 sig 0x000a0653, pf_mask 0x22, 2020-07-08, rev 0x00e0, size 94208 sig 0x000a0655, pf_mask 0x22, 2020-07-08, rev 0x00e0, size 93184 sig 0x000a0661, pf_mask 0x80, 2020-07-02, rev 0x00e0, size 93184 * Updated Microcodes sig 0x000306f2, pf_mask 0x6f, 2020-05-27, rev 0x0044, size 34816 sig 0x000406e3, pf_mask 0xc0, 2020-07-14, rev 0x00e2, size 105472 sig 0x00050653, pf_mask 0x97, 2020-06-18, rev 0x1000159, size 33792 sig 0x00050654, pf_mask 0xb7, 2020-06-16, rev 0x2006a08, size 35840 sig 0x00050656, pf_mask 0xbf, 2020-06-18, rev 0x4003003, size 52224 sig 0x00050657, pf_mask 0xbf, 2020-06-18, rev 0x5003003, size 52224 sig 0x000506c9, pf_mask 0x03, 2020-02-27, rev 0x0040, size 17408 sig 0x000506ca, pf_mask 0x03, 2020-02-27, rev 0x001e, size 15360 sig 0x000506e3, pf_mask 0x36, 2020-07-14, rev 0x00e2, size 105472 sig 0x000706a8, pf_mask 0x01, 2020-06-09, rev 0x0018, size 75776 sig 0x000706e5, pf_mask 0x80, 2020-07-30, rev 0x00a0, size 109568 sig 0x000806e9, pf_mask 0x10, 2020-05-27, rev 0x00de, size 104448 sig 0x000806e9, pf_mask 0xc0, 2020-05-27, rev 0x00de, size 104448 sig 0x000806ea, pf_mask 0xc0, 2020-06-17, rev 0x00e0, size 104448 sig 0x000806eb, pf_mask 0xd0, 2020-06-03, rev 0x00de, size 104448 sig 0x000806ec, pf_mask 0x94, 2020-05-18, rev 0x00de, size 104448 sig 0x000906e9, pf_mask 0x2a, 2020-05-26, rev 0x00de, size 104448 sig 0x000906ea, pf_mask 0x22, 2020-05-25, rev 0x00de, size 103424 sig 0x000906eb, pf_mask 0x02, 2020-05-25, rev 0x00de, size 104448 sig 0x000906ec, pf_mask 0x22, 2020-06-03, rev 0x00de, size 103424 sig 0x000906ed, pf_mask 0x22, 2020-05-24, rev 0x00de, size 103424 sig 0x000a0660, pf_mask 0x80, 2020-07-08, rev 0x00e0, size 94208 * 0x806c1: remove the new Tiger Lake update: causes hang on cold/warm boot https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/44 INTEL-SA-00381 AND INTEL-SA-00389 MITIGATIONS ARE THEREFORE NOT INSTALLED FOR 0x806c1 TIGER LAKE PROCESSORS by this package update. Contact your system vendor for a firmware update, or wait fo a possible fix in a future Intel microcode release. * source: update symlinks to reflect id of the latest release, 20201110 * source: ship new upstream documentation (security.md, releasenote.md) Signed-off-by: Tan Zien <nabsdh9@gmail.com> [used different .tar.xz source, but with the same content] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 1add2c0d95efb970ab18485e570b146610740bf2)
* cypress-nvram: fix firmware is not exist for raspberry pi compute 4Nian Bohung2021-12-291-0/+3
| | | | | | | | | | | | | | Fixes: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.txt failed with error -2 Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.txt Direct firmware load for brcm/brcmfmac43455-sdio.txt failed with error -2 Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.txt Signed-off-by: Nian Bohung <n0404.n0404@gmail.com> (cherry picked from commit b1db5585557ed069027767a80c31c6f1f2920196) Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [improved commit mesage]
* base-files: fix service_running checkFlorian Eckert2021-12-291-3/+3
| | | | | | | | | | | | | | | | | | | The following command checks if a instance of a service is running. /etc/init.d/<service> running <instance> In the variable `$@`, which is passed to the function `service_running`, the first argument is always the `instance` which should be checked. Because all other variables where removed from `$@` with `shift`. Before this change the first argument of `$@` was set to the `$service` Variable. So the function does not work as expected. The `$service` variable was always the instance which should be checked. This is not what we want. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Reviewed-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit dd681838d370f1f6f6fa1bf1f22b0414322292f3)
* base-files: upgrade: fix efi partitions size calculationJavier Marcet2021-12-291-1/+1
| | | | | | | | | | We were missing (not using) the last sector of each partition, compared with the output of gparted. Signed-off-by: Javier Marcet <javier@marcet.info> [moved the dot] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 018ada5403f02921be22ee0cf49b88b2700ee105)
* ccache: update to 4.2.1DENG Qingfang2021-12-292-3/+3
| | | | | | | | | | | | | | | | | | | | | | Update ccache to 4.2.1 While compiling on Gentoo, the ccache can not be compiled due to this error: /openwrt/build_dir/host/ccache-4.1/unittest/../src/third_party/doctest.h:4084:47: error: size of array 'altStackMem' is not an integral constant-expression 4084 | static char altStackMem[4 * SIGSTKSZ]; | ^ This was fixed in ccache version 4.2.1 [1] by upgrading doctest [2]. [1] https://github.com/ccache/ccache/issues/825 [2] https://github.com/doctest/doctest/issues/473 Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patch] (cherry picked from commit 3ebfd0078d6aa4848ee8f72640266bd0390f790a) Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [improved commit message]
* mvebu: Turris Omnia: use SFP module, if presentKlaus Kudielka2021-12-291-1/+16
| | | | | | | | | | | | | | | | | Follow the recommendations stated in the Turris Omnia DTS for eth2: "In case SFP module is present, U-Boot has to enable the sfp node above, remove phy-handle property, and add managed = "in-band-status" property." The boot script is written in a way, that it works for all U-Boot versions deployed by the vendor so far (2015.10-rc2, 2019.07). Reviewed-by: Noci <noci@noci.work> Reviewed-by: Justin van Steijn <jvs@fsfe.org> Reviewed-by: Nico Rikken <nico@nicorikken.eu> Reviewed-by: Julius Schwartzenberg <julius.schwartzenberg@gmail.com> Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> (cherry picked from commit 23d2690e5a5410576b587bc96e2c2cf5fc693927)
* mvebu: backport Turris Omnia DTS changes to 5.4Klaus Kudielka2021-12-296-3/+249
| | | | | | | | | | | | Kernel 5.4 receives a reduced set, just to make the SFP cage work. While we are at it, move the patches accepted upstream to the 0xx series. Reviewed-by: Noci <noci@noci.work> Reviewed-by: Justin van Steijn <jvs@fsfe.org> Reviewed-by: Nico Rikken <nico@nicorikken.eu> Reviewed-by: Julius Schwartzenberg <julius.schwartzenberg@gmail.com> Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> (cherry picked from commit 8138cb8737d1475e6e8d57393500f30384e75a82)
* kernel: bump 5.4 to 5.4.168Hauke Mehrtens2021-12-2825-56/+56
| | | | | | | | | All updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* apm821xx: fix WD MyBook Live DUO USB-PortChristian Lamparter2021-12-272-1/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | where to begin? the USB regulator settings were just a part of the issue. With them changed, according to the forum it still failed when a USB device was connected to the port with: dwc2 4bff80000.usbotg: dwc2_restore_global_registers: no global registers to restore dwc2 4bff80000.usbotg: dwc2_exit_partial_power_down: failed to restore registers dwc2 4bff80000.usbotg: exit partial_power_down failed dwc2 4bff80000.usbotg: HC died; cleaning up One clue was found upstream in commit cc10ce0c51b1 ("usb: dwc2: disable power_down on Amlogic devices") |Disable power_down by setting the parameter to |DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic |Meson SoCs where USB devices are only recognized when plugged in before |booting Linux. A hot-plugged USB device was not detected even though the |device got power (my USB thumb drive for example has an LED which lit |up). |[...] the same method proposed there worked with APM821xx's USB IP-Core. Link: https://forum.openwrt.org/t/wd-my-book-duo-usb/111926/2 Reported-by: thwe and takimata (openwrt forum) Fixes: b70d3557e05 ("apm821xx: clean up gpio-hogs") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 832b9cbd741cdb6cc8483b2cddfef6de000ec61d)
* hostapd: only attempt to set qos map if supported by the driverFelix Fietkau2021-12-232-1/+13
| | | | | | | Fixes issues with brcmfmac Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 5e67cd63c4ff5d8f36c341dfa3355e3a4ac2be81)
* mac80211: optimize airtime fairness code to reduce cpu usageFelix Fietkau2021-12-211-0/+60
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 87def9efd8cee66da3bd3961671e580282427c2e)
* kernel: backport the upstream implementation of threaded NAPI to 5.4Felix Fietkau2021-12-2112-376/+692
| | | | | | | | The workqueue based implementation has a few corner cases and typically lower performance than the upstream one Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 01bebc070c35d87c24a594fff7ee1911965759aa)
* mac80211: Update toversion 5.10.85Hauke Mehrtens2021-12-1428-140/+65
| | | | | | | | | The following patches were backported from upstream before and are not needed any more: package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch package/kernel/mac80211/patches/subsys/307-mac80211-do-not-access-the-IV-when-it-was-stripped.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: sysupgrade: fix support for Luxul's legacy firmware formatRafał Miłecki2021-12-131-1/+3
| | | | | | Fixes: c808c55b398c ("bcm53xx: sysupgrade: refactor handling different firmware formats") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3bcf3e8143160e447c22c0ac3fa66fbcf6a59eef)
* bcm4908: build chk image for Netgear RAXE500Rafał Miłecki2021-12-131-1/+1
| | | | | | Fixes: 63ba3eaccdde ("bcm4908: start working on Netgear RAXE500 image") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0e8a5acf6eb4c689b6deed2146010b5b2c54fa78)
* bcm4908: start working on Netgear RAXE500 imageRafał Miłecki2021-12-132-0/+36
| | | | | | | | | bootfs still needs more work before it's ready. For some unknown reason model RAXE500 uses board id RAX220. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 63ba3eaccddeb8058b0fabd69197e650735573bc)
* bcm4908: enable MTD_CMDLINE_PARTSRafał Miłecki2021-12-131-0/+1
| | | | | | | | It's needed to support devices with U-Boot. That bootloader passes MTD layout using cmdline. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 21d28adbc1cc98c55858a73d62b9bf89c3874b08)
* bcm4908: continue work on images for U-Boot based devicesRafał Miłecki2021-12-133-0/+96
| | | | | | | It still isn't ready though - more data needs to be added to the bootfs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 494c033f9cbad67ea2cee3860894bdfffea65109)
* bcm4908: backport upstream DT commitsRafał Miłecki2021-12-137-8/+234
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d745835ae19caf1999924a434abd25e92cce4343)
* bcm4908: add watchdog supportRafał Miłecki2021-12-133-0/+77
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9565bd9bd61f026effce7ebfe17d413d1adb032f)
* bcm4908: start work on images for devices using U-BootRafał Miłecki2021-12-132-0/+36
| | | | | | | | | | | | | | | | | | | | | New BCM4908 family based routers will use U-Boot bootloader. That will require using a totally different firmware format. Kernel has to be put in a FIT image. OpenWrt has some helpers for generating .its files but they don't fit BCM4908 requirements and there is no simple way of extending any of them. The best solution seems to be storing an .its template. BCM4908 bootfs may: 1. contain extra binaries (other than kernel & DTB) 2. include multiple DTB files 3. store device specific U-Boot configurations with custom properties Such setups are too complex to generate using shell script. Raw .its file on the other hand seems quire clean & reasonable. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a02c971dff934a11ddadf7ffd850dabcab5a3cdf)
* bcm4908img: detect Linksys imagesRafał Miłecki2021-12-132-1/+23
| | | | | | | Linksys uses an extra 0x100 bytes long tail for BCM4908 images. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c4d5e60f6115b9a97318774533ea764bf938c2a9)
* bcm4908img: store offset of tail dataRafał Miłecki2021-12-132-11/+14
| | | | | | | | This simplifies some operations as it doesn't have to be caculated over and over. It will also allow adding support for more vendor formats. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 063038bcef39802aa65c196a162067f66e5c8621)
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-12-131-4/+4
| | | | | | | e5050f3 linksys: ea9500-v2: add cferam file Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0b2c1997e988552a4bb52dda88eccf4896fbb61b)
* bcm53xx: sysupgrade: refactor handling different firmware formatsRafał Miłecki2021-12-131-165/+123
| | | | | | | | | | | | | | | | | | | List of supported formats grew over time and implementation got a bit messy. There are multiple functions with format-specific parameters and commands. Refactor it by making platform_identify() setup all required info right after detecting firmware format. This simplifies formats handling in platform_other_check_image() and platform_do_upgrade() a lot. This has been tested on: 1. SmartRG SR400ac (TRX): non-NAND sysupgrade 2. Netgear R8000 (CHK): NAND aware and standard sysupgrade-s 3. D-Link DIR-885L (Seama): NAND aware and standard sysupgrade-s 4. Luxul XWR-3150 (LXL): NAND aware and standard sysupgrade-s Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 80041dea7094f46f9ef5402964c95b0a5dcd5f28)
* bcm53xx: sysupgrade: simplify extracting image from Seama sealRafał Miłecki2021-12-131-15/+3
| | | | | | | Use "oseama extract" which supports now writing to stdout. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e7bd6cce4c382e33a62c462bf07bafba23b22e1a)
* bcm53xx: enable Linksys EA6300 & EA9200 buildsRafał Miłecki2021-12-131-3/+0
| | | | | | | | | | | Both should be supported since: 1. Adding NVMEM driver for NVRAM 2. Using NVRAM info for determining active firmware partition Linksys EA9500 uses very similar design and works fine. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 287257d676b1120f388120f1dc259e4eefd3b163)
* bcm53xx: backport the latest upstream DT changesRafał Miłecki2021-12-136-1/+386
| | | | | | | | | This includes: 1. BCM5301X changes from 5.14 and queued 5.15 stuff 2. NSP changes from 5.11 - 5.15 for kernel 5.10 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit bce00f47e5d67e5a33e9d7fa137cbe0a5d3d334b)
* bcm53xx: fix Luxul XWR-3150 LAN ports numberingRafał Miłecki2021-12-131-1/+1
| | | | | | | | Port numbers were reverted. Fixes: c459a6bf482f ("bcm53xx: add support for Luxul FullMAC WiFi devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 53546c3e945f5a0a8f8c62311f48c6f21c9ab0a8)
* otrx: update to the latest masterRafał Miłecki2021-12-131-3/+3
| | | | | | | | | | | 56e8e19 otrx: support TRX from stdin when extracting a37ccaf otrx: support unsorted partitions offsets 1fa145e otrx: extract shared code opening & parsing TRX format 4ecefda otrx: allow validating TRX from stdin cf01e69 otrx: avoid unneeded fseek() when calculating CRC32 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 942facd14f0a13fa3aeb4238d866e764f5caec8c)
* otrx: use firmware-utils.git to avoid code duplicationRafał Miłecki2021-12-133-603/+10
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7c4d79aa1c3595e2be36d1449cf63404f301f748)
* kernel: bump 5.4 to 5.4.163Hauke Mehrtens2021-12-12111-847/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for Xiaomi AIoT Router AC2350Evgeniy Isaev2021-12-125-1/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications * SoC: QCA9563 @ 775MHz (MIPS 74Kc) * RAM: 128MiB DDR2 * Flash: 16MiB SPI-NOR (EN25QH128) * Wireless 2.4GHz (SoC): b/g/n, 3x3 * Wireless 5Ghz (QCA9988): a/n/ac, 4x4 MU-MIMO * IoT Wireless 2.4GHz (QCA6006): currently unusable * Ethernet (AR8327): 3 LAN × 1GbE, 1 WAN × 1GbE * LEDs: Internet (blue/orange), System (blue/orange) * Buttons: Reset * UART: through-hole on PCB ([VCC 3.3v](RX)(GND)(TX) 115200, 8n1) * Power: 12VDC, 1,5A MAC addresses map (like in OEM firmware) art@0x0 88:C3:97:*:57 wan/label art@0x1002 88:C3:97:*:2D lan/wlan2g art@0x5006 88:C3:97:*:2C wlan5g Obtain SSH Access 1. Download and flash the firmware version 1.3.8 (China). 2. Login to the router web interface and get the value of `stok=` from the URL 3. Open a new tab and go to the following URL (replace <STOK> with the stok value gained above; line breaks are only for easier handling, please put together all four lines into a single URL without any spaces): http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev ?bssid=any&user_id=any&ssid=-h%0Anvram%20set%20ssh_en%3D1%0Anvram%20commit %0Ased%20-i%20%27s%2Fchannel%3D.%2A%2Fchannel%3D%5C%5C%22debug%5C%5C%22%2F g%27%20%2Fetc%2Finit.d%2Fdropbear%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A 4. Wait 30-60 seconds (this is the time required to generate keys for the SSH server on the router). Create Full Backup 1. Obtain SSH Access. 2. Create backup of all flash (on router): dd if=/dev/mtd0 of=/tmp/ALL.backup 3. Copy backup to PC (on PC): scp root@192.168.31.1:/tmp/ALL.backup ./ Tip: backup of the original firmware, taken three times, increases the chances of recovery :) Calculate The Password * Locally using shell (replace "12345/E0QM98765" with your router's serial number): On Linux printf "%s6d2df50a-250f-4a30-a5e6-d44fb0960aa0" "12345/E0QM98765" | \ md5sum - | head -c8 && echo On macOS printf "%s6d2df50a-250f-4a30-a5e6-d44fb0960aa0" "12345/E0QM98765" | \ md5 | head -c8 * Locally using python script (replace "12345/E0QM98765" with your router's serial number): wget https://raw.githubusercontent.com/eisaev/ax3600-files/master/scripts/calc_passwd.py python3.7 -c 'from calc_passwd import calc_passwd; print(calc_passwd("12345/E0QM98765"))' * Online https://www.oxygen7.cn/miwifi/ Debricking (lite) If you have a healthy bootloader, you can use recovery via TFTP using programs like TinyPXE on Windows or dnsmasq on Linux. To switch the router to TFTP recovery mode, hold down the reset button, connect the power supply, and release the button after about 10 seconds. The router must be connected directly to the PC via the LAN port. Debricking You will need a full dump of your flash, a CH341 programmer, and a clip for in-circuit programming. Install OpenWRT 1. Obtain SSH Access. 2. Create script (on router): echo '#!/bin/sh' > /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh echo '. /bin/boardupgrade.sh' >> /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh echo 'board_prepare_upgrade' >> /tmp/flash_fw.sh echo 'mtd erase rootfs_data' >> /tmp/flash_fw.sh echo 'mtd write /tmp/openwrt.bin firmware' >> /tmp/flash_fw.sh echo 'sleep 3' >> /tmp/flash_fw.sh echo 'reboot' >> /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh chmod +x /tmp/flash_fw.sh 3. Copy `openwrt-ath79-generic-xiaomi_aiot-ac2350-squashfs-sysupgrade.bin` to the router (on PC): scp openwrt-ath79-generic-xiaomi_aiot-ac2350-squashfs-sysupgrade.bin \ root@192.168.31.1:/tmp/openwrt.bin 4. Flash OpenWRT (on router): /bin/ash /tmp/flash_fw.sh & 5. SSH connection will be interrupted - this is normal. 6. Wait for the indicator to turn blue. Signed-off-by: Evgeniy Isaev <isaev.evgeniy@gmail.com> [improve commit message formatting slightly] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 6c148116f778bfd2db88476cee4753b32538eafe)
* ramips: fix tl-mr3020-v3 switch topology to configure vlans via luciSergey V. Lobanov2021-12-051-1/+4
| | | | | | | | | | | Currently it is not possible to configure VLANs via LUCI on tplink tl-mr3020-v3. This patch fixes switch topology for the LUCI interface. Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in> [copied commit message from github PR] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit e22c91e144d63ccbd7b76b370a53652c48db1d6f)
* busybox: update to 1.33.2 bugfix releaseHannu Nyman2021-12-041-2/+2
| | | | | | | | | | | Update busybox to 1.33.2, which includes only 5 commits after 1.33.1 Bug fix release. 1.33.2 has fixes for hush and ash (parsing fixes) and unlzma (fix where we could read before beginning of buffer). https://git.busybox.net/busybox/log/?h=1_33_2 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mt76: update to the latest versionFelix Fietkau2021-12-031-3/+3
| | | | | | | | | | 71e08471ab56 mt76: eeprom: fix return code on corrected bit-flips 9a8fc6636d83 mt76: move sar_capa configuration in common code 7cdbea1dc82a mt76: only access ieee80211_hdr after mt76_insert_ccmp_hdr 678071ef7029 mt76: mt7615: clear mcu error interrupt status on mt7663 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit fc4398fe71810f3bb5637bdfd0b3975a8ec858f0)
* mac80211: bump PKG_RELEASEFelix Fietkau2021-12-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix tx aggregation locking issueFelix Fietkau2021-12-021-0/+79
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit a1a71a71999001502fa86136dbf8925da8341098)
* mac80211: fix queue assignment of aggregation start requestsFelix Fietkau2021-12-021-0/+28
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 15d8c7aa74c202c530dbd53e53b00e418f0b64f4)
* mt76: update to the latest versionFelix Fietkau2021-12-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | a6451fea5a3d mt76: mt7615: improve wmm index allocation 1911486414dc mt76: mt7915: improve wmm index allocation 7998a41d1321 mt76: clear sta powersave flag after notifying driver 664475574438 mt76: mt7603: introduce SAR support 5c0da39c940b mt76: mt7915: introduce SAR support 77fc6c439a32 mt76: mt7603: improve reliability of tx powersave filtering 094b3d800835 firmware: update mt7663 rebb firmware to 20200904171623 25237b19bcc1 mt76: eeprom: tolerate corrected bit-flips 1463cb4c6ac2 mt76: mt7921: fix boolreturn.cocci warning 586bad6020f7 mt76: mt7921: use correct iftype data on 6GHz cap init 8ec95c910425 mt76: mt7921s: fix bus hang with wrong privilege 688e30c7d854 firmware: update mt7921 firmware to version 20211014 6fad970893dd mt76: fix key pointer overwrite in mt7921s_write_txwi/mt7663_usb_sdio_write_txwi 95acf972750c mt76: fix 802.3 RX fail by hdr_trans 3f402b0cf6c0 mt76: mt7921s: fix possible kernel crash due to invalid Rx count 929a03a8d65d mt76: connac: fix last_chan configuration in mt76_connac_mcu_rate_txpower_band Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 7e153900566ec1aebdc4f15f5a9d9ff9b9401cc1)
* uboot-lantiq: danube: fix hanging lzma kernel uncompression #2Mathias Kresin2021-11-271-0/+9
| | | | | | | Follow up to commit c744798cad6a13436f2ba9dd3a280cb16d315c85. Managed to hit the very same issue again while playing with the NOR SPL builds. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: set maximum kernel size for P2812HNUF3Mathias Kresin2021-11-271-0/+2
| | | | | | | | | | | The board has a fixed size kernel partition but do not limit the kernel size during image building. Disable image building for both boards as well, since the kernel of the last release as well as master are to big to fit into the 2 MByte kernel partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: backport fix for dealing with stripped IV on rxFelix Fietkau2021-11-263-11/+37
| | | | | | | This fixes potental rx drop issues Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 68189835ac81779f9cf21060dca0c54dcdb0c0a6)
* hostapd: add a patch that allows processing auth requests for peers in ↵Felix Fietkau2021-11-245-9/+43
| | | | | | | | | | | | | | | | blocked state If authentication fails repeatedly e.g. because of a weak signal, the link can end up in blocked state. If one of the nodes tries to establish a link again before it is unblocked on the other side, it will block the link to that other side. The same happens on the other side when it unblocks the link. In that scenario, the link never recovers on its own. To fix this, allow restarting authentication even if the link is in blocked state, but don't initiate the attempt until the blocked period is over. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit f84053af5c0b0a159ea4d3e90b0c06574b4fde8d)
* hostapd: bump PKG_RELEASEFelix Fietkau2021-11-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: bump PKG_RELEASEFelix Fietkau2021-11-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a fix for kernel warnings when forwarding packets in mesh modeFelix Fietkau2021-11-243-11/+73
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit d439c7d85a05c3548e5566bec292292a4f6b7ef5)
* mac80211: fix regression in SSN handling of addba txFelix Fietkau2021-11-242-2/+46
| | | | | | | | | Some drivers that do their own sequence number allocation (e.g. ath9k, mwlwifi) rely on being able to modify params->ssn on starting tx ampdu sessions. This was broken by a change that modified it to use sta->tid_seq[tid] instead. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit ddd977fcc5838eb6bfb6cb9dad99dfe09a8ff67e)
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-06 09:55:54 +0000