aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: fix Archer C2 v1 5GHz MAC addressDavid Bauer2020-01-021-0/+2
| | | | | | | | | | | The TP-Link Archer C2 v1 previously had a generic Ralink MAC address set for the 5GHz radio (MT7610), as the caldata does only contain a generic MAC address. Set the MAC address from the vendor firmware for the 5GHz radio to assign unique MAC addresses to every device. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add system LED indicators for TP-Link C20iDavid Bauer2020-01-021-1/+5
| | | | | | | Use the WPS LED to indicate system status like it is done for the TP-Link Archer C2 v1 and many other boards. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: convert TP-Link MT7620 boards to tpt triggerDavid Bauer2020-01-027-7/+8
| | | | | | | | | | | | This converts all MediaTek MT7620 boards from TP-Link to use the now supported WiFi throughput LED trigger. This way, the LED state now covers all VAPs regardless of their name. Also align all single-WiFi LEDs to represent the state of the 2.4GHz radio. This was not always the case previously, as later-added support for the MT7610 altered the phy probing order. Signed-off-by: David Bauer <mail@david-bauer.net>
* scripts/gen-dependencies.sh: use /bin/shRosen Penev2020-01-011-1/+1
| | | | | | This uses no special bash stuff. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/gen-dependencies.sh: replace backticks with $()Rosen Penev2020-01-011-2/+2
| | | | | | Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libcxx: Add size optimizationsRosen Penev2020-01-013-1/+39
| | | | | | | | | | | | | | Changed standard to 2a. 2a (as well as 17) contain more constexpr functions, which are evaluated at compile time. This saves space. Added --gc-sections. With the CXXABI change, this now makes the package smaller. With these, size went down to 210845 on mipsel_24kc. Also fixed two small compiler warnings. No real change in behavior. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libcxx: Build with the libsupc++ ABIRosen Penev2020-01-011-1/+2
| | | | | | | | | | | | | | | | | | | | | Allows proper exception handling. This includes removing unimplemented warnings. File size increased as a result: Before: 182874 After: 211006 On mipsel_24kc. Note that this requires libsupc++ anyway. It's specified in g++-libcxx. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: mt7620: use throughput trigger on HiWiFi HC5x61DENG Qingfang2019-12-314-8/+6
| | | | | | Throughput trigger support for MT7620 has been added, so switch to it Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: remove HiWiFi HC5661 non-existent 5GHz LEDDENG Qingfang2019-12-311-5/+0
| | | | | | | | HC5661 does not have 5GHz WiFi or LED. Fixes: e6e373d3480e ("ramips: Add DTS files for HiWiFi HC5x61 models") Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ubox: update to version 2019-12-31Hans Dedecker2019-12-311-3/+3
| | | | | | 0e34af1 kmodloader: added -a arg to modprobe Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: add support for TP-Link RE200 v1Andreas Böhler2019-12-315-0/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE200 v1 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7620A+MT7610EN. Specifications -------------- - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - UART header on PCB (57600 8n1) - 8x LED (GPIO-controlled; only 6 supported), 2x button There are 2.4G and 5G LEDs in red and green which are controlled separately. The 5G LED is currently not supported, since the GPIOs couldn't be determined. Installation ------------ Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. However, the OEM firmware upgrade file is required and a tool to fix the MD5 sum of the header. This procedure overwrites U-Boot and there is not failsafe / recovery mode present! To prepare an image, you need to take the header and U-Boot (i.e. 0x200 + 0x20000 bytes) from an OEM firmware file and attach the factory image to it. Then fix the header MD5Sum1. Serial console -------------- Opening the case is quite hard, since it is welded together. Rename the OpenWrt factory image to "test.bin", then plug in the device and quickly press "2" to enter flash mode (no line feed). Follow the prompts until OpenWrt is installed. Unfortunately, this devices does not offer a recovery mode or a tftp installation method. If the web interface upgrade fails, you have to open your device and attach serial console. Since the web upgrade overwrites the boot loader, you might also brick your device. Additional notes ---------------- MAC address assignment is based on stock-firmware. For me, the device assigns the MAC on the label to Ethernet and the 2.4G WiFi, while the 5G WiFi has a separate MAC with +2. *:88 Ethernet/2.4G label, uboot 0x1fc00, userconfig 0x0158 *:89 unused userconfig 0x0160 *:8A 5G not present in flash This seems to be the first ramips device with a TP-Link v1 header. The original firmware has the string "EU" embedded, there might be some region- checking going on during the firmware upgrade process. The original firmware also contains U-Boot and thus overwrites the boot loader during upgrade. In order to flash back to stock, the first header and U-Boot need to be stripped from the original firmware. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ramips: fix switch setup for Xiaomi MiWiFi NanoSungbo Eo2019-12-312-2/+10
| | | | | | | MiWiFi Nano has two LAN ports, which are in reverse order. Add port numbers to them, and disable unused ports. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* scripts/mkits.sh: replace legacy backticks with $()Rosen Penev2019-12-311-2/+2
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [adjust commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/symlink-tree.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | This uses nothing bash specific. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/strip-kmod.sh: harmonize leading whitespacesAdrian Schmutzler2019-12-311-1/+1
| | | | | | Convert leading spaces to tabs for consistency in the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/strip-kmod.sh: use sh instead of bashRosen Penev2019-12-311-1/+1
| | | | | | There's nothing bash specific here. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/strip-kmod.sh: replace legacy backticks with $()Rosen Penev2019-12-311-1/+1
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [slightly adjusted commit title, added commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: split interface configuration for clearfog pro and baseJosua Mayer2019-12-311-6/+10
| | | | | | | Handle both variants separately. This removes the need for calling swconfig to detect the switch, and simplifies future changes. Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
* ath79: generate firmware image for aircube-ispChristian Mauderer2019-12-312-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a "factory" image for the aircube-isp devices. Note that the firmware can't be uploaded without prior special preparation. For the most recent instructions on how to do that, visit the OpenWRT wiki page of the Ubiquiti airCube ISP for details: https://openwrt.org/toh/ubiquiti/ubiquiti_aircube_isp Current procedure: With the original firmware 2.5.0 it is possible to upload and execute a script via the configuration. To do that download and unpack the original configuration, adapt uhttpd config to execute another lua handler (placed in the config directory) and pack and upload it again. The lua handler can call a script that mounts an overlayfs and modifies the "fwupdate.real" binary so that an unsigned image is accepted. The overlayfs is necessary because a security system (called tomoyo) doesn't allow binaries in other locations than /sbin/fwupdate.real (and maybe some more) to access the flash when executed via network. A big thanks to Torvald Menningen (Snap) from the OpenWRT forum for finding out how to patch the binary so that it accepts an unsigned image. The current step-by-step procedure is: - Use a version 2.5.0 of the original firmware. This is important because a binary file will be modified. - Download a configuration. - Unpack it (it's just a tar gz file without an ending). - Add the following to uhttpd: `````` config 'uhttpd' 'other' list listen_http 0.0.0.0:8080 list listen_http [::]:8080 option 'home' '/tmp/persistent/config/patch/www' option lua_prefix '/lua' option lua_handler '/tmp/persistent/config/patch/handler.lua' `````` - Create a `patch` subfolder. - Create a `patch/www` subfolder. - Create a `patch/handler.lua` with the following content: `````` function handle_request(env) uhttpd.send("Status: 200 OK\r\n") uhttpd.send("Content-Type: text/plain\r\n\r\n") local command = "/bin/sh /tmp/persistent/config/patch/patch.sh 2>&1" local proc = assert(io.popen(command)) for line in proc:lines() do uhttpd.send(line.."\r\n") end proc:close() end `````` - Create a `patch/patch.sh` with the following content: `````` #!/bin/sh -x set -e set -u set -x UBNTBOX_PATCHED="/tmp/fwupdate.real" MD5FILE="/tmp/patchmd5" cat <<EOF > ${MD5FILE} c33235322da5baca5a7b237c09bc8df1 /sbin/fwupdate.real EOF # check md5 of files that will be patched if ! md5sum -c ${MD5FILE} then echo "******** Error when checking files. Refuse to do anything. ********" exit 0 fi # prepare some overlay functionality LOWERDIR="/tmp/lower_root" mkdir -p ${LOWERDIR} mount -t squashfs -oro /dev/mtdblock3 ${LOWERDIR} overlay_some_path() { PATH_TO_OVERLAY=$1 ALIAS=$2 UPPERDIR="/tmp/over_${ALIAS}" WORKDIR="/tmp/over_${ALIAS}_work" mkdir -p ${UPPERDIR} mkdir -p ${WORKDIR} mount -t overlay -o lowerdir=${LOWERDIR}${PATH_TO_OVERLAY},upperdir=${UPPERDIR},workdir=${WORKDIR} overlay ${PATH_TO_OVERLAY} } # patch the ubntbox binary. overlay_some_path "/sbin" "sbin" echo -en '\x10' | dd of=/sbin/fwupdate.real conv=notrunc bs=1 count=1 seek=24598 echo "******** Done ********" `````` - Repack the configuration. - Upload it via the normal web interface. - Wait about a minute. The webserver should restart. - Now there is a second web server at port 8080 which can call the lua script. Visit the page with a web browser. Link is for example http://192.168.1.1:8080/lua - You should see the output of the script with a "*** Done ***" at the end. Note that the patches are not permanent. If you restart the router you have to re-visit the link (but not re-upload the config). - Now you can upload an unsigned binary via the normal web interface. Signed-off-by: Christian Mauderer <oss@c-mauderer.de>
* toolchain: wrapper.sh: harmonize leading whitespacesAdrian Schmutzler2019-12-311-10/+10
| | | | | | | Convert leading spaces to tabs and generally harmonize leading whitespace indent in the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* toolchain: wrapper.sh: use /bin/sh instead of bashRosen Penev2019-12-311-1/+1
| | | | | | | | No bash features are actually used here. Signed-off-by: Rosen Penev <rosenp@gmail.com> [slightly adjust commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx: mbl_gen_hdd_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* arc770: gen_axs10x_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* archs38: gen_axs10x_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: gen_at91_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm2708: gen_rpi_sdcard_img.sh: use /bin/shRosen Penev2019-12-311-2/+2
| | | | | | | | | | Nothing here needs bash. While at it, remove trailing whitespace. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title, add whitespace comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* gemini: dns313_gen_hdd_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: gen_sdcard_head_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: gen_mt7623_emmc_img.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mxs: gen_sdcard_ext4_ext4.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [adjust prefix of commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mxs: gen_sdcard_vfat_ext4.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [change prefix of commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* omap: gen_omap_sdcard_img.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rb532: gen_image.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [slightly adjust commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* sunxi: gen_sunxi_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | This has nothing that needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* zynq: gen_zynq_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | This has nothing that needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: gen_mvebu_sdcard_img.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | There is nothing that needs bash anymore. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/gen_image_generic.sh: replace deprecated backticks with $()Rosen Penev2019-12-311-1/+1
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [adjust commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/gen_image_generic.sh: remove $ in arithmeticRosen Penev2019-12-311-1/+1
| | | | | | | | Fixes shellcheck warning: SC2004: $/${} is unnecessary on arithmetic variables. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/wrapper: replace legacy backticks with $()Rosen Penev2019-12-311-3/+3
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [alter commit title, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: gen_mvebu_sdcard_img.sh: don't use format directly in printfRosen Penev2019-12-311-1/+1
| | | | | | | | | | Enables proper checking. Matches printf behavior in C. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: gen_mvebu_sdcard_img.sh: replace let with $(())Rosen Penev2019-12-311-1/+1
| | | | | | | | | | let is a bashism. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert "iptables: update to 1.8.4"Jo-Philipp Wich2019-12-303-14/+14
| | | | | | | | | | | | | | | This reverts commit 10cbc896c0a26aecff37261450c21f29fb5b99db. The updated iptables package does not build due to the following error encountered on the buildbots: cp: cannot stat '.../iptables-1.8.4/ipkg-install/usr/lib/libiptc.so.*': No such file or directory The changelog mentions "build: remove -Wl,--no-as-needed and libiptc.so" so it appears as if further packaging changes are needed beyond a simple version bump. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iptables: update to 1.8.4DENG Qingfang2019-12-303-14/+14
| | | | | | | | | Update iptables to 1.8.4 ChangeLog: https://netfilter.org/projects/iptables/files/changes-iptables-1.8.4.txt Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* procd: fix running jailed non-root processDaniel Golle2019-12-301-4/+4
| | | | | | | | | Setting user and group for a jailed process caused the jail not to come up. Fix this by passing user and group to ujail and change user only once the jail has been setup. This allows jailing services which refuse to run as root user. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add LED trigger for TL-WR902AC v3 WAN LEDDavid Bauer2019-12-301-0/+1
| | | | | | | | | | | This adds an LED trigger for the WAN LED on top of the TP-Link TL-WR902AC v3. Currently, only the LED on the port itself shows the link state, while the LED on top of the device stays dark. The WAN port of the device is a hybrid LAN/WAN one, hence why the LED at the port was labled LAN. Signed-off-by: David Bauer <mail@david-bauer.net>
* iwinfo: update to 2019-12-27David Bauer2019-12-301-3/+3
| | | | | | | a6f6c05 nl80211: properly handle netdev names starting with "radio" 31dcef3 iwinfo: add several QC/A device ids Signed-off-by: David Bauer <mail@david-bauer.net>
* rt2x00: add throughput LED triggerDavid Bauer2019-12-301-0/+44
| | | | | | | | | This adds a (currently missing) throughput LED trigger for the rt2x00 driver. Previously, LED triggers had to be assigned to the netdev, which was limited to a single VAP. Signed-off-by: David Bauer <mail@david-bauer.net> Tested-by: Christoph Krapp <achterin@googlemail.com>
* libubox: update to version 2019-12-28Petr Štetiar2019-12-281-4/+4
| | | | | | | Fixes startup issues of some services in procd and bumps ABI_VERSION to 20191228. Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020840.html Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ubox: update to latest git HEADHans Dedecker2019-12-281-3/+3
| | | | | | | | b30e0df kmodloader: print an error when no kernel module dir can be found 17689b6 logread: add option to filter for facilities c9ffeac kmodloader: added -v arg to modeprobe Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* brcm2708-userland: add new package with RPi utilsÁlvaro Fernández Rojas2019-12-282-0/+75
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 08:34:09 +0000