aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tools/zlib: switch to configure scriptRosen Penev2022-09-292-15/+14
| | | | | | A future commit will make tools/cmake use this. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* wolfssl: fix TLSv1.3 RCE in uhttpd by using 5.5.1-stable (CVE-2022-39173)Petr Štetiar2022-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fixes denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. Thanks to Max at Trail of Bits for the report and "LORIA, INRIA, France" for research on tlspuffin. Complete release notes https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Fixes: CVE-2022-39173 Fixes: https://github.com/openwrt/luci/issues/5962 References: https://github.com/wolfSSL/wolfssl/issues/5629 Tested-by: Kien Truong <duckientruong@gmail.com> Reported-by: Kien Truong <duckientruong@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "wolfssl: fix TLSv1.3 RCE in uhttpd by using latest 5.5.1-stable release"Petr Štetiar2022-09-291-2/+2
| | | | | | | | This reverts commit a596a8396b1ef23cd0eda22d9a628392e70e1e1a as I've just discovered private email, that the issue has CVE-2022-39173 assigned so I'm going to reword the commit and push it again. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wolfssl: refresh patchesPetr Štetiar2022-09-292-3/+3
| | | | | | So they're tidy and apply cleanly. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wolfssl: fix TLSv1.3 RCE in uhttpd by using latest 5.5.1-stable releasePetr Štetiar2022-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | Fixes denial of service attack and buffer overflow against TLS 1.3 servers using session ticket resumption. When built with --enable-session-ticket and making use of TLS 1.3 server code in wolfSSL, there is the possibility of a malicious client to craft a malformed second ClientHello packet that causes the server to crash. This issue is limited to when using both --enable-session-ticket and TLS 1.3 on the server side. Users with TLS 1.3 servers, and having --enable-session-ticket, should update to the latest version of wolfSSL. Thanks to Max at Trail of Bits for the report and "LORIA, INRIA, France" for research on tlspuffin. Complete release notes https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.1-stable Fixes: https://github.com/openwrt/luci/issues/5962 References: https://github.com/wolfSSL/wolfssl/issues/5629 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* bcm53xx: backport clk driver fix for DT nodes namesRafał Miłecki2022-09-294-124/+144
| | | | | | It allows dropping downstream patch renaming DT nodes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build: fix warnings from grepChris Osgood2022-09-281-1/+1
| | | | | | | Fixes build warnings when using newer versions of grep. Signed-off-by: Chris Osgood <chris_github@functionalfuture.com> Tested-by: Georgi Valkov <gvalkov@gmail.com>
* scripts/download.pl: generilize and simplify download tool checkChristian Marangi2022-09-281-16/+17
| | | | | | | | | Generilize download tool check and skip other check if a download tool has been found. While at it also reintroduce c836ca84e8f641e10a8349a8f9b7432b33d6cec1 that was previously dropped with aria2c support. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: update MAC address configuration for Buffalo WSR-1166DHPKazuhiro Ito2022-09-281-2/+2
| | | | | | | | | | | | Convert MAC address and label_mac configuration of Buffalo WSR-1166DHP to use the generic function of OpenWrt. Apply commit 770cfe9 for WCR-1166DS to WSR-1166DHP too. Tested on the device and MAC address is kept before and after this change. Signed-off-by: Kazuhiro Ito <kzhr@d1.dion.ne.jp>
* kernel: mtk_ppe: use MTK_FOE_STATE_INVALID instead of *_UNBINDDaniel Golle2022-09-288-0/+78
| | | | | | | | | | Instead of dropping *fix-typo-in-__mtk_foe_entry.patch which effectively means keeping the (also wrong) assignment of MTK_FOE_STATE_BIND, rather use MTK_FOE_STATE_INVALID as that works well on both older (NETSYS_V1) and newer (NETSYS_V2) MediaTek SoCs. Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: rtl931x: fix missing CONFIG_COMMON_CLK_REALTEK config flagChristian Marangi2022-09-281-0/+1
| | | | | | | | | When the realtek clock driver was introduced, CONFIG_COMMON_CLK_REALTEK was not correctly disabled for other subtarget. Add the missing config flag to fix compilation error on buildbot. Fixes: 4850bd887c3a ("realtek: add RTL83XX clock driver") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* tools: fix firmware-utils dependsRosen Penev2022-09-271-1/+1
| | | | | | | When firmware-utils was converted to use cmake, the dependency was not updated. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Revert "toolchain/gcc: use zstd from tools"Christian Marangi2022-09-271-1/+0
| | | | | | | This reverts commit e6cc3ded0709aa6c7a190c31575bb5c19e204cd2. Require more testing as it does cause compilation error. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* Revert "tools/zstd: build libraries as static"Christian Marangi2022-09-271-1/+1
| | | | | | | This reverts commit e3989094b801da63b7b65b2460ea30dfeb324cd3. Require more testing as it does cause compilation error. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* tools/zstd: build libraries as staticRosen Penev2022-09-271-1/+1
| | | | | | Enables to get rid of rpath hack for all users. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ccache: update to 4.6.3Nick Hainke2022-09-272-3/+3
| | | | | | | | | | Release Notes: https://ccache.dev/releasenotes.html#_ccache_4_6_3 Refresh patch: - 100-honour-copts.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/ccache: update to 4.6.2Nick Hainke2022-09-271-2/+2
| | | | | | | Release notes: https://ccache.dev/releasenotes.html#_ccache_4_6_2 Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/ccache: update to 4.6.1Nick Hainke2022-09-271-2/+2
| | | | | | | Release notes: https://ccache.dev/releasenotes.html#_ccache_4_6_1 Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: rename upstreamed patches and import fixesDaniel Golle2022-09-2716-42/+155
| | | | | | | | | | | | Move and rename patches which were merged upstream and import follow-up fixes for MediaTek Ethernet offloading features on MT7622 and Filogic platforms. Remove patch 793-net-ethernet-mtk_eth_soc-fix-typo-in-__mtk_foe_entry.patch which breaks hardware flow offloading on MT7622, it will be reverted upstream as well. Fixes: c93c5365c0 ("kernel: pick patches for MediaTek Ethernet from linux-next") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* qos-scripts: fix trailing whitespace in config filesManas Sambhus2022-09-274-8/+7
| | | | Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
* qos-scripts: replace modprobe by rmmodManas Sambhus2022-09-271-2/+1
| | | | | | modprobe -r is not available on all platforms, hence use rmmod Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
* kernel: netsupport: replace insmod by modprobeManas Sambhus2022-09-271-1/+1
| | | | | | Replace insmod by modprobe in TEQL hotplug script Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
* ppp: use modprobe in place of insmodManas Sambhus2022-09-272-15/+5
| | | | | | | This will prevent `module is already loaded` lines from appearing in the logs when a PPP connection is reconnecting Signed-off-by: Manas Sambhus <manas.sambhus+github@gmail.com>
* include/prereq-build: fix ldconfig-stub symlink on macos and BSD OSsChristian Marangi2022-09-271-1/+1
| | | | | | | | | | | | Some OS may have the true bin to a different location than /bin/true. BSD based system and macos have true on /usr/bin/true. Fix this by checking both location and take the one available in the system. Reported-by: Sergey V. Lobanov <sergey@lobanov.in> Suggested-by: Huangbin Zhan <zhanhb88@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* Makefile: fix stray \ warnings with grep-3.8Nick Hainke2022-09-271-1/+1
| | | | | | | | | | | | | | | | We simply grep for "/usr". So no need for "-E" or "\/". Furthermore, in the new grep versions this creates warnings. As written in the grep-3.8 announcement: Regular expressions with stray backslashes now cause warnings, as their unspecified behavior can lead to unexpected results. For example, '\a' and 'a' are not always equivalent <https://bugs.gnu.org/39678>. Fixes warnings in the form of: grep: warning: stray \ before / Signed-off-by: Nick Hainke <vincent@systemli.org>
* toolchain/gdb: fix expat locationRosen Penev2022-09-271-1/+1
| | | | | | | GDB is not finding tools/expat. This fixes it. Move it up with the other tools. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/gcc: use zstd from toolsRosen Penev2022-09-271-0/+1
| | | | | | pkgconfig is not used for some reason. Match other used tools. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: fix issues with targets installed via feedsFelix Fietkau2022-09-273-5/+6
| | | | | | | - fix including modules.mk when a target is being replaced - fix calling make targets from target/linux Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/download.pl: fix support for aria2c download tool on macosChristian Marangi2022-09-261-6/+8
| | | | | | | | | Currently we use /dev/shm to place aria2c tmp file. This is not present on macos. Use the openwrt tmp directory instead of the linux-only /dev/shm to save compatibility with more os. Fixes: d39123626931 ("download.pl: add aria2c support") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* scripts/download.pl: fix mirrors regression for curl and wgetChristian Marangi2022-09-261-1/+1
| | | | | | | | | With the introduction of aria2c support, curl and wget no longer try to download the file from mirrors. Fix this regression by emptying the remaining mirrors list only when aria2c is used. Fixes: d39123626931 ("download.pl: add aria2c support") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* nftables: backport fix to interval based rulesKevin Darbyshire-Bryant2022-09-262-1/+24
| | | | | | | | | 'rule inet dscpclassify dscp_match meta l4proto { udp } th dport { 3478 } th sport { 3478-3497, 16384-16387 } goto ct_set_ef' works with 'nft add', but not 'nft insert', the latter yields: "BUG: unhandled op 4". Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* sysfsutils: Define START early in fileKevin Darbyshire-Bryant2022-09-262-2/+3
| | | | | | | | | | The luci ucode rewrite exposed the definition of START as being over 1K from start of file. Initial versions limited the search for START & STOP to within the 1st 1K of a file. Whilst the search has been expanded, it doesn't do any harm to define START early in the file like all other init scripts seen so far. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "mt76: fix compilation error with mt7915 and kernel >= 5.15.61"Christian Marangi2022-09-251-38/+0
| | | | | | | | | | | This reverts commit 6e9613844ca1ddea7e36abc44a513c89ef0598ff. The patch was wrong in the first place as we base everything on backports package and the compilation error was caused by an ath11k present downstream. (will be needed later when backports package will be updated but not now) Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* realtek: fix RTL839x egress tag for ports >= 32Jan Hoffmann2022-09-251-1/+1
| | | | | | | Don't overwrite AS_DPM and L2LEARNING flags when dest_port is >= 32. Fixes: 1773264a0c6d ("realtek: correct egress frame port verification") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* mt76: fix compilation error with mt7915 and kernel >= 5.15.61Christian Marangi2022-09-251-0/+38
| | | | | | | | With kernel 5.15.61 the define IEEE80211_MAX_AMPDU_BUF got changed to IEEE80211_MAX_AMPDU_BUF_HE. Add patch to fix compilation error on next 5.15 kernel versions. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* scripts/download.pl: fix whitespace in mirror urls and drop forChristian Marangi2022-09-251-7/+2
| | | | | | | Fix whitespace in mirror urls and replace for loop with join+map logic. Fixes: d39123626931 ("download.pl: add aria2c support") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* wolfssl: prefer regular libwolfssl over cpu-cryptoEneas U de Queiroz2022-09-253-16/+16
| | | | | | | | | | | | | | | | | Rename libwolfssl-cpu-crypto to libwolfsslcpu-crypto so that the regular libwolfssl version comes first when running: opkg install libwolfssl Normally, if the package name matches the opkg parameter, that package is preferred. However, for libraries, the ABI version string is appended to the package official name, and the short name won't match. Failing a name match, the candidate packages are sorted in alphabetical order, and a dash will come before any number. So in order to prefer the original library, the dash should be removed from the alternative library. Fixes: c3e7d86d2b (wolfssl: add libwolfssl-cpu-crypto package) Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: ABI version shouldn't depend on benchmarkEneas U de Queiroz2022-09-251-1/+1
| | | | | | | | | | | Move CONFIG_PACKAGE_libwolfssl-benchmark from the top of PKG_CONFIG_DEPENDS to after PKG_ABI_VERSION is set. This avoids changing the ABI version hash whether the bnechmark package package is selected or not. Fixes: 05df135cac (wolfssl: Rebuild when libwolfssl-benchmark gets changes) Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* download.pl: add aria2c supportBradford Zhang2022-09-251-13/+40
| | | | | | | | | | | | Use aria2c download tool by default on package download if available in the system. aria2c permits to use multiple mirrors and may improve download speed on special context where servers are hard to reach. Co-authored-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bradford Zhang <zyc@zyc.name> [ fix wrong var in the script and improve commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* octeon: fix imagebuilder generation by introducing generic targetNick Hainke2022-09-242-5/+5
| | | | | | | | | | | | | The generic imagebuilder does not have a generic in the name, although this is the default naming scheme. Use bcm53xx as template for this fix. Before the fix: openwrt-imagebuilder-octeon.Linux-x86_64.tar.xz After: openwrt-imagebuilder-octeon-generic.Linux-x86_64.tar.xz Signed-off-by: Nick Hainke <vincent@systemli.org>
* x86/config-5.10: geode: add missing CONFIG_WATCHDOG_CORE optionFlorian Eckert2022-09-241-0/+1
| | | | | | | | | | | | | If this module is not set to y, then I get the following compilation error during geode build. Package kmod-w83627hf-wdt is missing dependencies for the following libraries: watchdog.ko Setting the linux CONFIG_WATCHDOG_CORE to y as in all other targets fixes this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* x86/config-5.15: geode: add missing CONFIG_WATCHDOG_CORE optionFlorian Eckert2022-09-241-0/+1
| | | | | | | | | | | | | | If this module is not set to y, then I get the following compilation error during geode build. Package kmod-w83627hf-wdt is missing dependencies for the following libraries: watchdog.ko Setting the linux CONFIG_WATCHDOG_CORE to y as in all other targets fixes this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* linux/x86: add missing CONFIG_WATCHDOG_CORE to *-wdtFlorian Eckert2022-09-241-4/+10
| | | | | | | | | The packages also need a dependency to watchdog core. This commit adds the needed WATCHDOG_CORE dependency. https://github.com/torvalds/linux/blob/master/drivers/watchdog/Kconfig Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ipq40xx: Add ZTE MF289FGiammarco Marzano2022-09-248-6/+465
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for Sony NCP-HG100/CellularINAGAKI Hiroshi2022-09-2410-1/+756
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sony NCP-HG100/Cellular is a IoT Gateway with 2.4/5 GHz band 11ac (WiFi-5) wireless function, based on IPQ4019. Specification: - SoC : Qualcomm IPQ4019 - RAM : DDR3 512 MiB (H5TC4G63EFR) - Flash : eMMC 4 GiB (THGBMNG5D1LBAIT) - WLAN : 2.4/5 GHz 2T2R (IPQ4019) - Ethernet : 10/100/1000 Mbps x2 - Transceiver : Qualcomm QCA8072 - WWAN : Telit LN940A9 - Z-Wave : Silicon Labs ZM5101 - Bluetooth : Qualcomm CSR8811 - Audio DAC : Realtek ALC5629 - Audio Amp. : Realtek ALC1304 - Voice Input Processor : Conexant CX20924 - Micro Controller Unit : Nuvoton MINI54FDE - RGB LED, Fan, Temp. sensors - Touch Sensor : Cypress CY8C4014LQI - RGB LED driver : TI LP55231 (2x) - LEDs/Keys : 11x, 6x - UART : through-hole on PCB - J1: 3.3V, TX, RX, GND from tri-angle marking - 115200n8 - Power : 12 VDC, 2.5 A Flash instruction using initramfs image: 1. Prepare TFTP server with the IP address 192.168.132.100 and place the initramfs image to TFTP directory with the name "C0A88401.img" 2. Boot NCP-HG100/Cellular and interrupt after the message "Hit any key to stop autoboot: 2" 3. Perform the following commands and set bootcmd to allow booting from eMMC setenv bootcmd "mmc read 0x84000000 0x2e22 0x4000 && bootm 0x84000000" saveenv 4. Perform the following command to load/boot the OpenWrt initramfs image tftpboot && bootm 5. On the initramfs image, perform sysupgrade with the sysupgrade image (if needed, backup eMMC partitions by dd command and download to other place before performing sysupgrade) 6. Wait for ~120 seconds to complete flashing Known issues: - There are no drivers for audio-related chips/functions in Linux Kernel and OpenWrt, they cannot be used. - There is no driver for MINI54FDE Micro-Controller Unit, customized for this device by the firmware in the MCU. This chip controls the following functions, but they cannot be controlled in OpenWrt. - RGB LED - Fan this fan is controlled automatically by MCU by default, without driver - Thermal Sensors (2x) - Currently, there is no driver or tool for CY8C4014LQI and cannot be controlled. It cannot be exited from "booting mode" and moved to "normal op mode" after booting. And also, the 4x buttons (mic mute, vol down, vol up, alexa trigger) connected to the IC cannot be controlled. - it can be exited from "booting mode" by installing and executing i2cset command: opkg update opkg install i2c-tools i2cset -y 1 0x14 0xf 1 - There is a connection issue on the control by uqmi for the WWAN module. But modemmanager can be used without any issues and the use of it is recommended. - With the F2FS format, too many errors are reported on erasing eMMC partition "rootfs_data" while booting: [ 1.360270] sdhci: Secure Digital Host Controller Interface driver [ 1.363636] sdhci: Copyright(c) Pierre Ossman [ 1.369730] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374729] sdhci_msm 7824900.sdhci: Got CD GPIO ... [ 1.413552] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit [ 1.528325] mmc0: new HS200 MMC card at address 0001 [ 1.530627] mmcblk0: mmc0:0001 004GA0 3.69 GiB [ 1.533530] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB [ 1.537831] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB [ 1.542918] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (247:0) [ 1.550323] Alternate GPT is invalid, using primary GPT. [ 1.561669] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 ... [ 8.841400] mount_root: loading kmods from internal overlay [ 8.860241] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 8.863746] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 9.240465] block: attempting to load /etc/config/fstab [ 9.246722] block: unable to load configuration (fstab: Entry not found) [ 9.246863] block: no usable configuration [ 9.254883] mount_root: overlay filesystem in /dev/mmcblk0p17 has not been formatted yet [ 9.438915] urandom_read: 5 callbacks suppressed [ 9.438924] random: mkfs.f2fs: uninitialized urandom read (16 bytes read) [ 12.243332] mmc_erase: erase error -110, status 0x800 [ 12.246638] mmc0: cache flush error -110 [ 15.134585] mmc_erase: erase error -110, status 0x800 [ 15.135891] mmc_erase: group start error -110, status 0x0 [ 15.139850] mmc_erase: group start error -110, status 0x0 ...(too many the same errors)... [ 17.350811] mmc_erase: group start error -110, status 0x0 [ 17.356197] mmc_erase: group start error -110, status 0x0 [ 17.439498] sdhci_msm 7824900.sdhci: Card stuck in wrong state! card_busy_detect status: 0xe00 [ 17.446910] mmc0: tuning execution failed: -5 [ 17.447111] mmc0: cache flush error -110 [ 18.012440] F2FS-fs (mmcblk0p17): Found nat_bits in checkpoint [ 18.062652] F2FS-fs (mmcblk0p17): Mounted with checkpoint version = 428fa16b [ 18.198691] block: attempting to load /etc/config/fstab [ 18.198972] block: unable to load configuration (fstab: Entry not found) [ 18.203029] block: no usable configuration [ 18.211371] mount_root: overlay filesystem has not been fully initialized yet [ 18.214487] mount_root: switching to f2fs overlay So, this support uses ext4 format instead which has no errors. Note: - The primary uart is shared for debug console and Z-Wave chip. The function is switched by GPIO15 (Linux: 427). value: 1: debug console 0: Z-Wave - NCP-HG100/Cellular has 2x os-image pairs in eMMC. - 0:HLOS, rootfs - 0:HLOS_1, rootfs_1 In OpenWrt, the first image pair is used. - "bootipq" command in U-Boot requires authentication with signed-image by default. To boot unsigned image of OpenWrt, use "mmc read" and "bootm" command instead. - This support is for "Cellular" variant of NCP-HG100 and not tested on "WLAN" (non-cellular) variant. - The board files of ipq-wifi may also be used in "WLAN" variant of NCP-HG100, but unconfirmed and add files as for "Cellular" variant. - "NET" LED is used to indicate WWAN status in stock firmware. - There is no MAC address information in the label on the case, use the address included in UUID in the label as "label-MAC" instead. - The "CLOUD" LEDs are partially used for indication of system status in stock firmware, use they as status LEDs in OpenWrt instead of RGB LED connected to the MCU. MAC addresses: LAN : 5C:FF:35:**:**:ED (ART, 0x6 (hex)) WAN : 5C:FF:35:**:**:EF (ART, 0x0 (hex)) 2.4 GHz: 5C:FF:35:**:**:ED (ART, 0x1006 (hex)) 5 GHz : 5C:FF:35:**:**:EE (ART, 0x5006 (hex)) partition layout in eMMC (by fdisk, GPT): Disk /dev/mmcblk0: 7733248 sectors, 3776M Logical sector size: 512 Disk identifier (GUID): **** Partition table holds up to 20 entries First usable sector is 34, last usable sector is 7634910 Number Start (sector) End (sector) Size Name 1 34 1057 512K 0:SBL1 2 1058 2081 512K 0:BOOTCONFIG 3 2082 3105 512K 0:QSEE 4 3106 4129 512K 0:QSEE_1 5 4130 4641 256K 0:CDT 6 4642 5153 256K 0:CDT_1 7 5154 6177 512K 0:BOOTCONFIG1 8 6178 6689 256K 0:APPSBLENV 9 6690 8737 1024K 0:APPSBL 10 8738 10785 1024K 0:APPSBL_1 11 10786 11297 256K 0:ART 12 11298 11809 256K 0:HSEE 13 11810 28193 8192K 0:HLOS 14 28194 44577 8192K 0:HLOS_1 15 44578 306721 128M rootfs 16 306722 568865 128M rootfs_1 17 568866 3958065 1654M rootfs_data [initial work] Signed-off-by: Iwao Yuki <dev.clef@gmail.com> Co-developed-by: Iwao Yuki <dev.clef@gmail.com> [adjustments, cleanups, commit message, sending patch] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (dropped clk_unused_ignore, dropped 901-* patches, renamed key nodes, changed LEDs chan/labels to match func-en, made :net -> (w)wan leds) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: base-files: properly close caseTomasz Maciej Nowak2022-09-241-0/+1
| | | | | | | | Fix this occurrence during boot: /bin/board_detect: line 10: Unsupported: not found Fixes: 80baffd2aa91 (" ipq40xx: add support for Pakedge WR-1") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ipq40xx: luma_wrtq-329acn: differentiate ethernet mac addressesTomasz Maciej Nowak2022-09-241-0/+12
| | | | | | | | On OEM firmware both addresses for In and Out ports are different. Set them as such also in OpenWrt. Fixes: e24635710c7e (" ipq40xx: add support for Luma Home WRTQ-329ACN") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* apm821xx: make 5.15 kernel defaultChristian Lamparter2022-09-241-2/+1
| | | | | | 5.15 has been available for some time for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: refresh 5.15 configChristian Lamparter2022-09-241-2/+2
| | | | | | | | | | | use the toolchain's default CPU (464fp) as the CPU option. This fixes a CPU selection prompt which shows up now. CPU selection > 1. Generic 32 bits powerpc (POWERPC_CPU) (NEW) 2. Rely on the toolchain's implicit default CPU (TOOLCHAIN_DEFAULT_CPU) (NEW) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: fix RUTX10 Wi-Fi woesKasparas Elzbutas2022-09-242-30/+8
| | | | | | | | | | | | | This partially reverts: commit cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") U-Boot on these devices mangles the device tree, so nvmem-cell type calibration doesn't work. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Signed-off-by: Kasparas Elzbutas <elzkas@gmail.com> (added reference to commit, rewrote commit message) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-17 06:19:38 +0000