aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: ubnt-rocket-m-ti: fix RSSI LED definitionsLech Perczak2020-01-212-6/+8
| | | | | | | | | | | | | | | | | When mapping for RSSI LEDs was defined for interface wlan0 on Ubiquiti Rocket M Titanium, it missed connection to actual interface. Therefore create the mapping to interface, so RSSI LEDs work without additional configuration, after starting rssileds service. While at that, split RSSI into ~equal intervals for 6 LEDs, and remove coefficients needed for PWM LEDs, as this board does not support PWM LEDs. Finally, for complete support, enable 'rssileds' package in per-device rootfs, so the indicator works out of box. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 83708f233daceacebd1c49da44711cc87b49162a)
* brcm47xx: fix switch port order for Netgear WN2500RP V1Walter Sonius2020-01-211-0/+5
| | | | | | | | | | | | | | The Netgear WN2500RP V1 switch0 already works for LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: 4 / 3 / 2 / 1 WAN port is absent on this device and therefore removed from switch config. Signed-off-by: Walter Sonius <walterav1984@gmail.com> [move block to maintain alphabetic sorting] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 098cbc68ee23db589ed6f0d081fe26cc385462f2)
* kirkwood: fix HDD LED labels for Zyxel NSA325 in 01_ledsStephan Knauss2020-01-211-2/+2
| | | | | | | | | | Change the LED labels for hdd1/hdd2 in 01_leds to match their counterpart in DTS. Signed-off-by: Stephan Knauss <openwrt@stephans-server.de> [improve commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit fbf297be38a93b9ca1119e5aaffecd2299087aa5)
* brcm47xx: fix switch port order for Netgear WNR3500 V2Walter Sonius2020-01-211-0/+1
| | | | | | | | | | | | The Netgear WNR3500 V2 switch0 already works for WAN/LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: Internet / 4 / 3 / 2 / 1 this resembles the Linksys E3000 V1. Verfied with imagebuilder edit FILES=/etc/board.d/01_network Signed-off-by: Walter Sonius <walterav1984@gmail.com> (cherry picked from commit cf2f1fc6871da0320afeefaa799af87fc7c0d1db)
* ramips: rt305x: remove unnecessary mediatek,portmapSungbo Eo2020-01-212-2/+0
| | | | | | | | | | "#mediatek,portmap" is not a valid property name. If mediatek,portmap equals 0x0, then the esw driver ditches it and uses the default value, 0x3f. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit f87281b2956110f10af9eb23fc6d327dfde7ab42)
* ramips: mt76x8: fix bogus mediatek,portmapSungbo Eo2020-01-2117-13/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mt76x8 uses esw_rt3050 driver, which does not accept mediatek,portmap with string values. Convert the strings to integers to make it work. According to its switch setup, WRTnode 2P/2R have a WAN port at port 0, so the correct value should be 0x3e. tplink_8m.dtsi uses "llllw", but it does not match switch setups of any device using the DTSI. Remove it from the DTSI and add correct value to DTS for each device. These devices have a WAN port at port 0. Set the value to 0x3e. - tplink,archer-c20-v4 - tplink,archer-c50-v3 - tplink,tl-mr3420-v5 - tplink,tl-wr840n-v4 - tplink,tl-wr841n-v13 - tplink,tl-wr842n-v5 These devices have only one ethernet port. They don't need portmap setting. - tplink,tl-wa801nd-v5 - tplink,tl-wr802n-v4 - tplink,tl-wr902ac-v3 Signed-off-by: Sungbo Eo <mans0n@gorani.run> (backported from commit 7a387bf9a0d73f7c581e2c9aeae6476588100e2c) [removed TL-WR841N v14 which is not present in 19.07] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix portmap for TP-Link Archer C50 v4Maxim Anisimov2020-01-211-1/+1
| | | | | | | According to 02_network portmap is wan=0 lan1=1 lan2=2 lan3=3 lan4=4 Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> (cherry picked from commit ebf535a6cfefef5b0afb74cb01c9a17ab242b85b)
* ramips: mt7620/mt7621: remove invalid mediatek,portmapSungbo Eo2020-01-211-3/+2
| | | | | | | | | | | | | mt7620 and mt7621 use mt7530 driver, which only accepts "llllw", "wllll", and "lwlll" values. According to its switch setup, Mi Router 3G v2 has a WAN port at port 4, so the correct value should be "llllw". Signed-off-by: Sungbo Eo <mans0n@gorani.run> (backported from commit d3c0a944059bb0d45c3b56278249100258378b0c) [removed devices not in 19.07] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add factory image for Netgear R6350Christoph Krapp2020-01-211-1/+6
| | | | | | | | | | | | | | This adds factory image generation for all three devices. These images can be flashed via WebUI for easy installation. Thanks to David Bauer for the inspiration. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [altered commit to only include the R6350] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 3c8df280a96bbd81357d6eb52845e6b5fa7162fe) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add mt7615e support to Netgear R6350Christoph Krapp2020-01-212-1/+10
| | | | | Signed-off-by: Christoph Krapp <achterin@googlemail.com> (cherry picked from commit 9861fa7abab97cb928aaa6cd5732a413d973ac95)
* libubox: update to version 2020-01-20Petr Štetiar2020-01-201-3/+3
| | | | | | | | | | | | | | | | | 43a103ff17ee blobmsg: blobmsg_parse and blobmsg_parse_array oob read fixes 5c0faaf4f5e2 tests: prefer dynamically allocated buffers 1ffa41535369 blobmsg_json: prefer snprintf usage 132ecb563da7 blobmsg: blobmsg_vprintf: prefer vsnprintf a2aab30fc918 jshn: prefer snprintf usage b0886a37f39a cmake: add a possibility to set library version a36ee96618a9 blobmsg: blobmsg_add_json_element() 64-bit values f0da3a4283b7 blobmsg_json: fix int16 serialization 20a070f08139 tests: blobmsg/json: add more test cases 379cd33d1992 tests: include json script shunit2 based testing Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 5c73bb12c82c078d8a93cb896348b41598ed9e19)
* fstools: backport fix from version 2020-01-18Petr Štetiar2020-01-201-3/+3
| | | | | | | | | | | | | Contains only the FS#2735 fix: 189b41b6b487 libblkid-tiny: fix f2fs labels by increasing label buffer Commit adding new feature wasn't backported (needs patched kernel anyway): f5c7c1813f52 fstools: Add support to read-only MTD partitions (eg. recovery images) Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 63000bfaf7163d97ac6feb343c7587e3d339e65e)
* kernel: bump 4.14 to 4.14.166Koen Vandeputte2020-01-203-4/+4
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.165Koen Vandeputte2020-01-202-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.164Koen Vandeputte2020-01-2034-124/+124
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: fix HiWiFi HC5962 status LEDDENG Qingfang2020-01-181-3/+4
| | | | | | | | | | Match LED behavior to stock firmware: Red: booting White: running Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> (cherry picked from commit 9a3c9a96563c3c3fb1e15b791d9117b193fed7a6)
* ramips: fix HiWiFi HC5962 switch configurationDENG Qingfang2020-01-181-1/+4
| | | | | | | | HC5962 has only 3 LAN ports, switch port 0 is unused Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> (backported from commit 68f49df31507454f86b72a5c1e250505176baed7) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add kmod-mt7615e to Xiaomi Mi Router 3 Pro imagesOzgur Can Leonard2020-01-182-3/+5
| | | | | | | Now that the mt76/mt7615e driver is in Openwrt, might as well use it. Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com> (cherry picked from commit d7c082ba4f7de97b3708d1f4a064954ffc774778)
* ar71xx/mikrotik: use ath10k-ct-smallbuffers for 64 MiB devicesThomas Nixon2020-01-181-1/+1
| | | | | | | | | | | This image is only needed on one device (wAP AC); since this target is going to be removed anyway it doesn't make sense to add an extra "low RAM" image. Fixes OOM issues on RouterBoard wAP AC. Signed-off-by: Thomas Nixon <tom@tomn.co.uk> (cherry picked from commit 788c8485eb5b71ef7e7b2a2d3077772e526e9746)
* ramips: fix wps leds/btn for TP-Link TL-WA801ND v5Jan Alexander2020-01-171-4/+16
| | | | | | | | | | | - fix color and active mode for existing wps led - add green wps led - add wps button Signed-off-by: Jan Alexander <jan@nalx.net> [wrap line] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 26105974e7f9758cd4bc443ce0322983f818acd5)
* hostapd: cleanup IBSS-RSNDaniel Golle2020-01-162-6/+2
| | | | | | | set noscan also for IBSS and remove redundant/obsolete variable. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 702c70264b388c2b47e171843f297f43c71b86b9)
* cryptodev-linux: remove DEFAULT redefinitionEneas U de Queiroz2020-01-151-1/+0
| | | | | | | | | The 'DEFAULT:=m if ALL' line prevents the phase1 buildbots from building the package, and users from downloading it, since they use 'ALL_KMODS=y' but 'ALL' is not set. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 9b25f833eb840527d07c47930de2c769115844f3)
* mac80211: fix a page refcounting issue leading to leaks/crashes in rx A-MSDU ↵Felix Fietkau2020-01-151-0/+25
| | | | | | | decap Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 9501469e1146c6d76b7dde6391479314897ba4d8)
* mac80211: fix sta TID stats leak on a few nl80211 callsFelix Fietkau2020-01-151-0/+21
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit d5b3024139089e38f57bd1827273d7fba8497635)
* ucert: update to version 2019-12-19Petr Štetiar2020-01-141-3/+3
| | | | | | | | | | | | | | | 14a279411cff fix certificate blob parsing vulnerability by using blob_parse_untrusted 19a7225ac018 fix leaking memory in cert_dump_blob 9dba44ddd4f5 fix possibly garbage value returned in cert_process_revoker 4462ff9dedfa add cram based unit tests 5fe64b5606aa cmake: split usign bits into static library 5d7626a2b6d8 cmake: reindent the file e284ed941972 cmake: enable hardening compiler flags and fix the reported issues 7e5390666347 add initial GitLab CI support fa0bf4ef45b1 cmake: add proper include and library dependencies Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 2544cb1ba377149a8663c7ac4a625d5399993e33)
* ramips: mt7621: disable images for gehua_ghl-r-001Petr Štetiar2020-01-141-0/+1
| | | | | | | | | | | This device OOPs during the boot due to broken flash. It can be probably fixed with `broken-flash-reset` once ramips is on 4.19 kernel. So disable images for this device until its fixed. Ref: FS#2695, PR#2483 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 28080d54d217fb4ab112e079f69462fee695dbf8)
* ramips: fix leds for TP-Link Archer C20 v4Maxim Anisimov2020-01-122-2/+3
| | | | | | | | | | | - add "gpio" group for wan_orange led - use tpt triggers for wifi led indication - add wifi 5 GHz led support Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> [slight commit message adjustment, backport] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 3a538db60abfc50b47ce1774f66d489700a50c00)
* ath79: add SUPPORTED_DEVICES for TP-Link TL-WR841N/ND v9 to v12Adrian Schmutzler2020-01-081-0/+4
| | | | | | | In ar71xx, v10 and v12 did not have separate board_name. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 7ed643d2052381bdd0e9680ca964eb87700cbc5e)
* ath79: add support for TP-Link TL-WR841N/ND v12Adrian Schmutzler2020-01-086-23/+48
| | | | | | | | | | | | | | | | | | | | | | | | This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC ID, same TFTP image name...). Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr841nv11_tp_recovery.bin (it's really v11, not v12) 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 8b76c6695b9274e3c12fdf80bcad7dc0c7202585)
* ath79: add support for TP-Link TL-WR841N/ND v10Adrian Schmutzler2020-01-085-3/+26
| | | | | | | | | | | | | | | | | | | | | | | | The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor changes, it contains a newer revision of the QCA9533 SoC and the CPU clock is significantly higher. Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr841nv10_tp_recovery.bin 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 4254193c1dc27e18baeb7488ac7fd4ce1afc5723)
* ath79: add support for the TP-LINK CPE220 V3Andrew Cameron2020-01-088-125/+233
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for a popular low-cost 2.4GHz N based AP Specifications: SoC: Qualcomm Atheros QCA9533 (650MHz) RAM: 64MB Storage: 8 MB SPI NOR Wireless: 2.4GHz N based built into SoC 2x2 Ethernet: 2x 100/10 Mbps, integrated into SoC Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 This also applies some minor changes to the common DTSI: - use &wmac for label-mac-device, as this one is actually set up in common DTSI - move &eth0 to parent DTSI - fix several leading spaces, added/removed newlines Signed-off-by: Andrew Cameron <apcameron@softhome.net> [DTS style fixes/improvements, updated commit message/title, backport to 19.07] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ethtool: fix PKG_CONFIG_DEPENDSMatthias Schiffer2020-01-071-1/+1
| | | | | | | Add missing CONFIG_ prefix. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 41c19dd542973dbc1336ecceaa32777506933cdf)
* OpenWrt v19.07.0: revert to branch defaultsHauke Mehrtens2020-01-065-11/+9
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v19.07.0: adjust config defaultsv19.07.0Hauke Mehrtens2020-01-065-9/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: Fix sysupgrade for Xiaomi mir3gHauke Mehrtens2020-01-061-3/+4
| | | | | | | | | | | | | | | | | | | This mostly reverts the original commit e9929ebeeaef ("ramips: Fix sysupgrade for Xiaomi mir3g") and replaces it with setting the BOARD_NAME to the old value. This way the folder in the tar will be named sysupgrade-mir3g and not sysupgrade-xiaomi_mir3g and the sysupgrade in OpenWrt 18.06 can find it. Without this change sysupgrade from 18.06 to 19.07 is only possible with the -F option. I tested the following sysupgrades successfully without -F 18.06 -> 19.07 19.07 -> master master -> 19.07 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: Fix potential dnsmasq crash with TCPHauke Mehrtens2020-01-062-1/+36
| | | | | | | | | | | | | | | | This is a backport from the dnsmasq master which should fix a bug which could cause a crash in dnsmasq. I saw the following crashes in my log: [522413.117215] do_page_fault(): sending SIGSEGV to dnsmasq for invalid read access from 2a001450 [522413.124464] epc = 004197f1 in dnsmasq[400000+23000] [522413.129459] ra = 004197ef in dnsmasq[400000+23000] This is happening in blockdata_write() when block->next is dereferenced, but I am not sure if this is related to this problem or if this is a different problem. I am unable to reproduce this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 414d0541381d432e69190f394dfe2a6e8122d6bb)
* x86: fix missing led variable warning during bootPetr Štetiar2020-01-061-0/+2
| | | | | | | | | Fixes following warning during the boot: WARNING: Variable 'led' does not exist or is not an array/object Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 5816caad26ae294f0adb4ed07ed53dcba7277c33)
* ca-certificates: provide ca-certs by both ca-certificates and ca-bundleMaxim Storchak2020-01-051-2/+4
| | | | | | | | | | - both packages provide ca-certs - make ca-bundle the default provider This should allow easy transition between these two forms of CA certificates storage Signed-off-by: Maxim Storchak <m.storchak@gmail.com> (cherry picked from commit dd299805ad18472a8245b4524a25e4381e166057)
* ramips: Fix sysupgrade for Xiaomi mir3gHauke Mehrtens2020-01-051-3/+3
| | | | | | | | | | | | | | | | | Without this change sysupgrade from 18.06 to 19.07 is only possible with the -F option. In OpenWrt 18.06 the nand_do_platform_check() function is called with the board name mir3g only, if the tar does not use mir3g it will fail. OpenWrt 19.07 and later support the metadata with the supported_devices attribute to allow renaming. Do the renaming of the target between 19.07 and master like it is done for some other boards. I tested the following sysupgrades successfully without -F 18.06 -> 19.07 19.07 -> master master -> 19.07 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: remove duplicate dts nodes of MediaTek LinkIt Smart 7688Jack Chen2020-01-051-4/+0
| | | | | | | | There are two identical wmac nodes in the dts file of MediaTek LinkIt Smart 7688, so delete one of them. Signed-off-by: Jack Chen <redchenjs@live.com> (cherry picked from commit 4be271a4867dcf57a122eeb7b42407e7a506915e)
* package: remove accidentally added symlinkPetr Štetiar2020-01-051-1/+0
| | | | | | | | In the commit f3439c401900 ("procd: update to version 2020-01-04") I've somehow managed to add local testing symlink to the uledd package, so removing it now. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* fstools: update to latest Git HEADJo-Philipp Wich2020-01-051-3/+3
| | | | | | | 823faa0 block: re-discover mtd devices on extroot mount retry Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 22a178e89282c7bd5bb181fc5c2c5cb6ff2403c8)
* procd: update to version 2020-01-04Petr Štetiar2020-01-052-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains following changes: a5af33ce9a16 instance: strdup string attributes d2e8bf6ef7cf system: watchdog_set: fix misleading indentation 9814807bd71c system: sysupgrade: fix possibly misleading error c7a2db3c1eb6 system: sysupgrade: rework firmware validation ea45c4a0f07c system: fix failing image validation due to EINTR 4fde95506243 cmake: fix lookup of external libraries 5ed190aae1b3 jail: remove accidentally added lines 52c5c1980ba3 jail: set user and group inside jail 3aa051b44177 system: sysupgrade: close input side of pipe before reading f47622e89c4d instance: Warn about unexpected number of parameters 564ecdfd9cc4 instance: ujail: Fix allocated size for no_new_privs parameter 7fb2e1dfa221 procd: simplify code in procd_inittab_run 4a127c3c60af procd: replace exit(-1) with exit(EXIT_FAILURE) bc0a73eaad58 procd: add upgraded binary to .gitignore ba4c4dbbbd65 procd: add start-console support 3e39fe539490 procd: shift arguments for askfirst only once 5d6282906baf procd: skip respawn in case device disappeared d27949f12fd7 procd: guard fork_worker calls 258aa04328a2 procd: Add cached and available to memory table 8e9fb51fa66e procd: Switch to nanosleep c844ace9729a system: Fix possible integer overflows Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ubus: update to version 2019-12-27Petr Štetiar2020-01-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains following changes: 041c9d1c052b ubusd/libubus-io: fix socket descriptor passing 8f2292478c57 ci: enable unit testing a1523d76b016 fix blob parsing vulnerability by using blob_parse_untrusted c60583743ccf ubus_monitor: workaround possibly false positive uses of memory after it is freed dac6c7c575ac ubusd_monitor: fix possible null pointer dereference 060dfbb26da3 ubus_common: remove duplicate ARRAY_SIZE and add missing include c5f2053dfcfd workaround possibly false positive uses of memory after it is freed 72be8e93f07d lua: ubus_lua_do_subscribe: fix copy&paste error a995b1e68129 lua: workaround false positive dereference of null pointer 08f17c87a000 add fuzzer and cram based unit tests c413be9b376c refactor ubusd.c into reusable ubusd_library afd47189e864 examples: remove dead increments b2e544238672 add initial GitLab CI support 058f4e9526ed libubus: fix incompatible pointer types assigment d2e026a33df8 iron out all extra compiler warnings 5d7ca8309d0a ubusd/libubus-io: fix variable sized struct position warning d61282db5640 ubusd: fix comparison of integers of different signs 90fb16234c22 cmake: enable extra compiler checks 2e051f628996 ubus: Support static builds 588baa3cd784 ubusd: retry sending messages on EINTR 76ea27a62774 libubus: attempt to receive data before calling poll 4daab27d004f libubus: do not abort recv_retry before completing a message and bumps ABI_VERSION to 20191227. Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libubox: update to version 2019-12-28Petr Štetiar2020-01-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains following changes: cd75136b1342 blobmsg: fix wrong payload len passed from blobmsg_check_array eb7eb6393d47 blobmsg: fix array out of bounds GCC 10 warning 86f6a5b8d1f1 blobmsg: reuse blobmsg_namelen in blobmsg_data 586ce031eaa0 tests: fuzz: fuzz _len variants of checking methods b0e21553ae8c blobmsg: add _len variants for all attribute checking methods cd3059796a57 Replace use of blobmsg_check_attr by blobmsg_check_attr_len 143303149c8b Ensure blob_attr length check does not perform out of bounds reads f2b2ee441adb blobmsg: fix heap buffer overflow in blobmsg_parse 4dfd24ed88c4 blobmsg: make blobmsg_len and blobmsg_data_len return unsigned value 2df6d35e3299 tests: add test cases for blobmsg parsing 8a34788b46c4 test: fuzz: add blobmsg_check_attr crashes 478597b9f9ae blob: fix OOB access in blob_check_type 325418a7a3c0 tests: use blob_parse_untrusted variant 0b24e24b93e1 blob: introduce blob_parse_untrusted 6d27336e4a8b blob: refactor attr parsing into separate function 833d25797b16 test: fuzz: add blob_parse crashes 09ee90f8d6ed tests: add test cases for blob parsing 436d6363a10b tests: add libFuzzer based tests bf680707acfd tests: add unit tests covered with Clang sanitizers f804578847de cmake: add more hardening compiler flags 46f8268b4b5b blobmsg/ulog: fix format string compiler warnings eb216a952407 cmake: use extra compiler warnings only on gcc6+ 07413cce72e1 tests: jshn: add more test cases 26586dae43a8 jshn: fix missing usage for -p and -o arguments 8e832a771d3a jshn: fix off by one in jshn_parse_file cb698e35409b jshn: jshn_parse: fix leaks of memory pointed to by 'obj' c42f11cc7c0f jshn: main: fix leak of memory pointed to by 'vars' 93848ec96dc5 jshn: refactor main into smaller pieces 9b6ede0e5312 avl: guard against theoretical null pointer dereference c008294a8323 blobmsg_json: fix possible uninitialized struct member 0003ea9c45cc base64: fix possible null pointer dereference 8baeeea1f52d add assert.h component b0a5cd8a28bf add cram based unit tests 1fefb7c4d7f9 add initial GitLab CI support c955464d7a9b enable extra compiler checks 6228df9de91d iron out all extra compiler warnings and bumps ABI_VERSION to 20191228. Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: sysupgrade: exit if the firmware download failedPetr Štetiar2020-01-052-2/+2
| | | | | | | | | | Sysupgrade process shouldn't continue if the firmware image couldn't be downloaded. Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020940.html Reported-by: Petr Novák <petrn@me.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit cf3da66d2ce11a30ae2993b56276ade10c9bddb9)
* base-files: upgrade: add case to export_bootdeviceKlaus Kudielka2020-01-051-1/+13
| | | | | | | | | | | | | | The factory uboot of the Turris Omnia boots with "root=b301", and we instruct new users to sysupgrade from there (e.g. method 1, step 7). Currently, this will fail with "Unable to determine upgrade device". Add a new case to export_bootdevice, which parses the hex argument. Ref: https://github.com/openwrt/openwrt/pull/2340#issuecomment-561317688 Fixes: 2e5a0b81ec29 ("mvebu: sysupgrade: sdcard: keep user added partitons") Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 3a4f587c465a0531b820ca1a3e90eb05c4927b68)
* sunxi: Turn on CONFIG_PINCTRL_SUN4I_A10 for A20Florian Fainelli2020-01-051-1/+1
| | | | | | | | | | | CONFIG_PINCTRL_SUN4I_A10 controls both the A10 and the A20 enablong of the pinctrl driver, this is necessary since upstream commit 5d8d349618a9464714c07414c5888bfd9416638f ("pinctrl: sunxi: add A20 support to A10 driver") which has been included in v4.13 and onwards. Fixes: ad2b3bf310f7 ("sunxi: Add support for kernel 4.14") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> (cherry picked from commit 32e4eaef1b4c2a7fa44787813fdf715b2ba500d9)
* wolfssl: bump to 4.3.0-stableEneas U de Queiroz2020-01-041-3/+3
| | | | | | | | This update fixes many bugs, and six security vulnerabilities, including CVE-2019-18840. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit d5ede68f8b67f8fa2b4102b90e5dd3722172299a)
* kernel: bump 4.14 to 4.14.162Hauke Mehrtens2020-01-0410-25/+25
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx, ramips Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-22 05:25:41 +0000