aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* base-files: fix enabled for services with only STOPKarel Kočí2021-06-221-1/+6
| | | | | | | | | | | | | | | There are services that have only STOP value set. They are executed only on shutdown and it is common to use them for system cleanup. There is one such service shipped directly with base-files, it is 'umount'. Those work the same way as those with START but enabled does not report them as enabled although it should have as they can be enabled and disabled as any other service. This also changes check from check for executable to check for symbolic link. The implementation depends on those being links to service file and it is much cleaner and direct to check for them being links. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-06-221-4/+4
| | | | | | e5050f3 linksys: ea9500-v2: add cferam file Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: fix Ethernet broken state after interface restartRafał Miłecki2021-06-221-0/+43
| | | | | | This fixes traffic stalls after ifdown & ifup. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: fix handling of the channel utilization optionsTimo Sigurdsson2021-06-211-0/+2
| | | | | | | | | | | | Commit 0a7657c ("hostapd: add channel utilization as config option") added the two new uci options bss_load_update_period and chan_util_avg_period. However, the corresponding "config_add_int" calls for these options weren't added, so attempting to actually use these options and change their values is bound to fail - they always stay at their defaults. Add the missing code to actually make these options work. Fixes: 0a7657c ("hostapd: add channel utilization as config option") Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
* hostapd: make country3 option configurableTimo Sigurdsson2021-06-211-2/+3
| | | | | | | | | The country3 option in hostapd.conf allows the third octet of the country string to be set. It can be used e.g. to indicate indoor or outdoor use (see hostapd.conf for further details). Make this option configurable but optional in OpenWrt. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
* ustream-ssl: variants conflict with each otherKarel Kočí2021-06-211-1/+3
| | | | | | | | This adds conflicts between variants of libustream pacakge. They provide the same file and thus it should not be possible to install them side by side. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* ath79: add missing GPIO_LATCH symbolDavid Bauer2021-06-222-0/+2
| | | | | | Fixes commit 7b8931678c36 ("ath79: add gpio-latch driver for MikroTik RouterBOARDs") Signed-off-by: David Bauer <mail@david-bauer.net>
* grub2: update to 2.06Dirk Neukirchen2021-06-213-59/+19
| | | | | | | | | | | | | | | -300-CVE-2015-8370.patch is upstreamed with different code (upstream id: 451d80e52d851432e109771bb8febafca7a5f1f2) - fixup OpenWrts setup_root patch compile tested: x86_64,i386 runtime tested: VM x86_64,VM i386 - booted fine - grub-editenv worked Signed-off-by: Dirk Neukirchen <plntyk.lede@plntyk.name>
* kernel/modules: make sure igb loads at bootChris Blake2021-06-211-1/+1
| | | | | | | | | | Without loading the igb at boot, the recovery wouldn't have network available. All network drivers should be loaded before etc/board.d/02_network is called. Note that other network drivers already have this set, such as tg3. Fixes: 7e0e5110bc90 ("kernel: add igb kernel module") Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* uci: add uci_revert functionFlorian Eckert2021-06-212-1/+9
| | | | | | Add missing uci_revert shell function wrapper. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ath10k-ct: fix typo in MakefileMichael Yartys2021-06-211-1/+1
| | | | | | Add forgotten colon to Makefile. Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
* build: create profiles.json per defaultPaul Spooren2021-06-211-1/+1
| | | | | | | | | | | | | The file is a info file just like config.buildinfo, feeds.buildinfo and version.buildinfo. It bundles these and more information in a machine readable way. This commit enables the creation of profiles.json by default and not only for buildbots. By doing so it follow the behaviour of the ImageBuilder which always creates the file, lastly this increases the files visibility for downstream projects. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ath79: ar934x: fix mounting issues if subpage is not supportedKoen Vandeputte2021-06-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the option to disable subpage writing is only set when a HW ECC engine is used. Some boards lack a HW ECC engine and use software for that. In this case, this NAND option does not get set when the NAND chip does not support it, resulting in mounting errors. Move the setting of this option to a generic init location so it gets set for all types where required. While at it, also OR the option instead of just setting it so we don't overwrite potential flags being set somewhere else. Before: [ 1.681273] UBI: auto-attach mtd2 [ 1.684669] ubi0: attaching mtd2 [ 1.688877] ubi0 error: validate_ec_hdr: bad VID header offset 2048, expected 512 [ 1.696469] ubi0 error: validate_ec_hdr: bad EC header [ 1.701712] Erase counter header dump: [ 1.705512] magic 0x55424923 [ 1.709322] version 1 [ 1.712330] ec 1 [ 1.715331] vid_hdr_offset 2048 [ 1.718610] data_offset 4096 [ 1.721880] image_seq 1462320675 [ 1.725680] hdr_crc 0x12255a15 After: 1.680917] UBI: auto-attach mtd2 [ 1.684308] ubi0: attaching mtd2 [ 2.954504] random: crng init done [ 3.142813] ubi0: scanning is finished [ 3.163455] ubi0: attached mtd2 (name "ubi", size 124 MiB) [ 3.169069] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 3.176037] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 3.182942] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 3.190013] ubi0: good PEBs: 992, bad PEBs: 0, corrupted PEBs: 0 [ 3.196102] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 3.203434] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1462320675 [ 3.212700] ubi0: available PEBs: 0, total reserved PEBs: 992, PEBs reserved for bad PEB handling: 20 [ 3.222124] ubi0: background thread "ubi_bgt0d" started, PID 317 [ 3.230246] block ubiblock0_1: created from ubi0:1(rootfs) [ 3.235819] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem [ 3.256830] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: add support for MikroTik RouterBOARD 912UAG-2HPnDDenis Kalashnikov2021-06-215-0/+225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been supported in the ar71xx. Links: * https://mikrotik.com/product/RB912UAG-2HPnD * https://openwrt.org/toh/hwdata/mikrotik/mikrotik_rb912uag-2hpnd This also supports the 5GHz flavour of the board. Hardware: * SoC: Atheros AR9342, * RAM: DDR 64MB, * SPI NOR: 64KB, * NAND: 128MB, * Ethernet: x1 10/100/1000 port with passive POE in, * Wi-Fi: 802.11 b/g/n, * PCIe, * USB: 2.0 EHCI controller, connected to mPCIe slot and a Type-A port -- both can be used for LTE modem, but only one can be used at any time. * LEDs: 5 general purpose LEDs (led1..led5), power LED, user LED, Ethernet phy LED, * Button, * Beeper. Not working: * Button: it shares gpio line 15 with NAND ALE and NAND IO7, and current drivers doesn't easily support this configuration, * Beeper: it is connected to bit 5 of a serial shift register (tested with sysfs led trigger timer). But kmod-gpio-beeper doesn't work -- we left this as is for now. Flashing: * Use the RouterBOARD Reset button to enable TFTP netboot, boot kernel and initramfs and then perform sysupgrade. * From ar71xx OpenWrt firmware run: $ sysupgrade -F /tmp/<sysupgrade.bin> For more info see: https://openwrt.org/toh/mikrotik/common. Co-Developed-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
* ath79: add NAND driver for MikroTik RB91xG seriesDenis Kalashnikov2021-06-214-0/+420
| | | | | | | | | | | | | Main part is copied from ar71xx original driver rb91x_nand written by Gabor Juhos <juhosg@openwrt.org>. What is done: * Support of kernel 5.4 and 5.10, * DTS support, * New gpio API (gpiod_*) support. Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
* ath79: add gpio-latch driver for MikroTik RouterBOARDsDenis Kalashnikov2021-06-213-0/+252
| | | | | | | | | | | | This is a slighty modified version of ar71xx gpio-latch driver written by Gabor Juhos <juhosg@openwrt.org>. Changes: * DTS support, * New gpio API (gpiod_*). Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
* build,json: fix generation with empty profilesPaul Spooren2021-06-201-1/+1
| | | | | | | | If the image generation doesn't add any profiles to the output the *profile merge* will fail. To avoid that set an empty profile as fallback. Signed-off-by: Paul Spooren <mail@aparcar.org>
* qos-scripts: add ifbN device before setting the link upPerry Melange2021-06-212-2/+3
| | | | | | | | | | | | commit 50413e1ec83dedaea44558d5f37af5454156a46a replaced ifconfig with ip. In order to set a link state to up, the interface needs to be added first. Fixes: FS#3754 Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com> [Add Fixes tag] Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* bcm4908: add kmod-gpio-button-hotplugRafał Miłecki2021-06-211-0/+1
| | | | | | | | All bcm4908 devices are expected to have GPIO buttons to make relevant package selected by default. This "fixes" triggering failsafe mode. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* tools/cmake: update to 3.20.3 + build with NinjaRosen Penev2021-06-201-3/+16
| | | | | | | | | | | | | | | | | | | Compile with Ninja. Ninja compiles faster and is more stable with parallel builds. Routines copied from cmake.mk. Speed improves from: Executed in 127.47 secs fish external usr time 17.02 mins 446.00 micros 17.02 mins sys time 1.18 mins 40.00 micros 1.18 mins to: Executed in 118.91 secs fish external usr time 17.28 mins 499.00 micros 17.28 mins sys time 1.13 mins 45.00 micros 1.13 mins Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/squashfskit4: fix compilation under big endianRosen Penev2021-06-203-6/+18
| | | | | | | | | | The macro used is for the wrong struct. Just byte swap manually. Refreshed patches. Tested on sparc64. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/e2fsprogs: update to 1.46.2Rosen Penev2021-06-201-3/+3
| | | | | | Fix wrong FPIC flag to fix compilation under sparc64 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* hostapd: add support for setting sae_pweMichael Yartys2021-06-201-1/+3
| | | | | | | | | | | | | Make it possible to specify the SAE mechanism for PWE derivation. The following values are possible: 0 = hunting-and-pecking loop only 1 = hash-to-element only 2 = both hunting-and-pecking loop and hash-to-element enabled hostapd currently defaults to hunting-and-pecking loop only. Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
* tools/libressl: update to 3.3.3Rosen Penev2021-06-201-3/+3
| | | | | | Fix wrong FPIC variable usage. Fixes compilation under sparc64 host. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files: redirect kill ouptut for ash, telnetd and dropbearFlorian Eckert2021-06-201-3/+3
| | | | | | | | | | | If one of the programmes is not running, then we see the following output in the logs. `killall: telnetd: no process killed` To ensure that the log is clean, redirect the output to /dev/null Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: remove unused vn and _vn functionFlorian Eckert2021-06-201-8/+0
| | | | | | | The remaining vn calls have been ported to v. Therefore, these functions are no longer needed and will be removed. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: change logging for upgrade on stage2Florian Eckert2021-06-201-4/+2
| | | | | | | Remove vn call in favour of v call. This commit serves as preparation for removing the vn function call. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: add syslog logging for v functionFlorian Eckert2021-06-202-1/+2
| | | | | | | | The logging output should not only be displayed in the calling shell session but also in the syslog. A sysupgrade and a configuration import, export can thus be traced in the syslog. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: upgrade: use zcat command provided by busyboxChuck Fan2021-06-201-1/+1
| | | | | | | | | | | Calling `switch_to_ramfs()` will not copy the gzip executable (/bin/gzip) to ramfs, but `/bin/zcat` will call `/bin/gzip` when package gzip is installed, instead of the busybox-supplied zcat. This will cause `zcat` to fail to find `gzip`, then cause the sysupgrade to fail. Adding the `busybox` prefix here will solve the problem. Signed-off-by: Chuck Fan <fanck0605@qq.com>
* busybox: disable bzip2Sergey Ponomarev2021-06-203-4/+3
| | | | | | | | | | bzip2 adds about 8kb of size. For tiny builds it's often disabled. It's not directly used by stock OpenWrt programs. Kernel images compressed with bzip2 are also not fully supported. Signed-off-by: Sergey Ponomarev <stokito@gmail.com> [fix \ indention] Signed-off-by: Paul Spooren <mail@aparcar.org>
* hostapd: stop advertising 11w featureDobroslaw Kijowski2021-06-202-6/+2
| | | | | | | | | | | | | This is a follow up of 1a9b896d ("treewide: nuke DRIVER_11W_SUPPORT"). LuCI commit ab010406 ("luci-mod-network: skip check for 802.11w feature") skips check of the 11w feature [1]. Now advertising it in hostapd is superfluous so stop doing it. [1]: https://github.com/openwrt/luci/pull/4689 Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com> [remove outdated PKG_RELEASE bump and update to SPDX] Signed-off-by: Paul Spooren <mail@aparcar.org>
* uhttpd: make organization (O=) of the cert configurable via uciMartin Schiller2021-06-202-3/+4
| | | | | | | | Make the organization (O=) of the cert configurable via uci. If not configured, use a combination of "OpenWrt" and an unique id like it was done before. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* grub2: pass compilation parameters more accurately李国2021-06-201-3/+5
| | | | | | | | | In order for the grub2 boot-related code to compile normally, we have made many adjustments to the compilation parameters. These adjustments are not necessary for tools-related code. We apply these parameter adjustments only to the boot-related code. Signed-off-by: 李国 <uxgood.org@gmail.com>
* grub2: make grub2 tools built in a separate variant李国2021-06-201-2/+6
| | | | | | | | | grub2 boot-related code and tools-related code may require different compilation parameters. We split them into different variants for compilation, so that we can accurately pass the required parameters and avoid causing problems. Signed-off-by: 李国 <uxgood.org@gmail.com>
* grub2: make grub2-bios-setup as a separate package李国2021-06-202-8/+25
| | | | | | | | | | The grub2 and grub2-efi packages should only contain boot-related code. grub-bios-setup is the same as grub-editenv, they are both grub2 tools and should be placed in a separate package. Signed-off-by: 李国 <uxgood.org@gmail.com> [use AUTORELEASE and update to SPDX] Signed-off-by: Paul Spooren <mail@aparcar.org>
* ramips: clean up dlink_dir-8xx-r1 recipeAdrian Schmutzler2021-06-201-5/+5
| | | | | | | | * only add factory.bin when it's defined * fix check-size vs. append-metadata * whitespace/line break cleanup Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: reorganize DTSI files for D-Link DIR-8xxAdrian Schmutzler2021-06-208-27/+40
| | | | | | | | | | | * Remove micro-DTSI mt7621_dlink_dir-882-x1.dtsi to ease reading config without too much inheritance * Use "separate" partitioning DTSIs so we can use the partitioning without a complete match on the other settings (i.e. without the former parent DTSI) * Rename files to express the new organization Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove PKG_INSTALL from CMake packagesRosen Penev2021-06-193-5/+0
| | | | | | | | | | | | It's already default with cmake.mk Found with: git grep PKG_INSTALL\: | cut -d ':' -f 1 | sort -u > ins git grep cmake.mk | cut -d ':' -f 1 > cmake comm -1 -2 ins cmake Signed-off-by: Rosen Penev <rosenp@gmail.com>
* treewide: remove BUILD_PARALLEL from CMake packagesRosen Penev2021-06-1911-16/+0
| | | | | | | | | | | | | It's already default. The only exception is mt76 which has Ninja disabled. Found with: git grep BUILD_PARALLEL | cut -d ':' -f 1 | sort -u > par git grep cmake.mk | cut -d ':' -f 1 > cmake comm -1 -2 par cmake Signed-off-by: Rosen Penev <rosenp@gmail.com>
* firmware-utils: tplink-safeloader: support Archer A6 v3 CAStijn Segers2021-06-201-0/+1
| | | | | | | | | The Canadian edition of the TP-Link Archer A6 v3 uses a different header, but otherwise it's identical to the already supported EU/US editions. Signed-off-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Brian Lee <dev@leebrian.me> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* build: Config-images: fix unit of partition sizesPaul Fertser2021-06-201-2/+2
| | | | | | | | | The code interprets these config values as Mebibytes rather than Megabytes so modify the description accordingly. Signed-off-by: Paul Fertser <fercerpav@gmail.com> [fix commit title prefix] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tools/ccache: update to 4.3Rosen Penev2021-06-191-4/+2
| | | | | | Remove BUILD_PARALLEL as it's default now. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mac80211: fix an issue with wds links on 802.11ax devicesFelix Fietkau2021-06-191-0/+51
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: disable CONFIG_PCIE_BUS_PERFORMANCEFelix Fietkau2021-06-181-2/+2
| | | | | | | | | The option was added in 5.9 and for some reason, it is causing performance issues at least on an APU2 board with the igb device. Switch CONFIG_PCIE_BUS_DEFAULT to fix the performance issues and match the older kernel's behavior Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove extra patch accidentally added during rebaseFelix Fietkau2021-06-181-888/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: make cryptoapi support needed by mac80211 built-inFelix Fietkau2021-06-181-9/+16
| | | | | | | This reduces the flash space impact, since built-in code is much smaller than a bunch of kernel modules on squashfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove patches stripping down crypto supportFelix Fietkau2021-06-1812-978/+895
| | | | | | | | Use of WPA3 and things like FILS is getting much more common, and platforms that can't affort the extra kilobytes for this code are fading away. Let's not hold back modern authentication methods any longer Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: system hang caused by deferring calls into minstrel to dequeueFelix Fietkau2021-06-174-40/+127
| | | | | | Move the aggregation check to mac80211 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix minstrel sample time checkFelix Fietkau2021-06-171-0/+23
| | | | | | | | We need to skip sampling if the next sample time is after jiffies, not before. This patch fixes an issue where in some cases only very little sampling (or none at all) is performed, leading to really bad data rates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: select iwinfoFelix Fietkau2021-06-171-1/+1
| | | | | | Since iwinfo is now used in the core scripts, it needs to be present on the system Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 12:40:54 +0000