aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* build: add nconfigSergio E. Nemirowski2020-07-077-2/+2397
| | | | | | | | Add support for make target nconfig (ncurses) Reviewed-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Sergio E. Nemirowski <sergio@outerface.net> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: nand: disable images for glinet_gl-ar750sPetr Štetiar2020-07-071-0/+2
| | | | | | | | | Fixes following build failures: WARNING: Image file glinet_gl-ar750s-nor-kernel.bin is too big WARNING: Image file glinet_gl-ar750s-nor-nand-kernel.bin is too big Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for 8devices Rambutan boardAndrey Bondar2020-07-075-0/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 2x USB2.0 host - 2x UART - SPI, I2C, GPIO Flash instructions: Upgrade from ar71xx target: sysupgrade -F /tmp/openwrt-ath79-nand-8dev_rambutan-squashfs-sysupgrade.tar or upgrade from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 openwrt-ath79-nand-8dev_rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Petr Štetiar <ynezz@true.cz> [copy&pasted missing commit description] Signed-off-by: Andrey Bondar <a.bondar@8devices.com>
* dropbear: make rsa-sha2-256 pubkeys usable againPetr Štetiar2020-07-071-0/+40
| | | | | | | | | | | | | Upstream in commit 972d723484d8 ("split signkey_type and signature_type for RSA sha1 vs sha256") has added strict checking of pubkey algorithms which made keys with SHA-256 hashing algorithm unusable as they still reuse the `ssh-rsa` public key format. So fix this by disabling the check for `rsa-sha2-256` pubkeys. Ref: https://tools.ietf.org/html/rfc8332#section-3 Fixes: d4c80f5b172e ("dropbear: bump to 2020.80") Tested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: use WiFi LED DT triggers for TP-Link RE650 v1Adrian Schmutzler2020-07-072-5/+7
| | | | | | | | | | | | This moves WiFi LED triggers from 01_leds to device tree. While at it, convert the labels there to lower case; this is more commonly used and the change will actually remove competition between DT trigger and leftover uci config on already installed systems. Suggested-by: Georgi Vlaev <georgi.vlaev@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: switch to kernel 5.4David Bauer2020-07-071-1/+1
| | | | | | | | As the reported major bugs are ironed out, switch to the new kernel to begin testing with a broader audience. Signed-off-by: David Bauer <mail@david-bauer.net> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: conditionally enable testing-kernel featureDavid Bauer2020-07-071-1/+3
| | | | | | | | | | | Only enable the testing-kernel feature for the target when the testing kernel version does not match the stable kernel version. This way, the option for building the testing kernel in the build config menu is only exposed when there's a testing kernel available. Signed-off-by: David Bauer <mail@david-bauer.net> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: set port numbers corresponding to reg valueAleksander Jan Bajkowski2020-07-076-53/+53
| | | | | | | | | Fix inconsistencies found in DTS files and sort ethernet ports based on updated names. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [squash two separate patches, rephrase commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: remove redundant includes from fritz736x DTS filesAleksander Jan Bajkowski2020-07-073-9/+0
| | | | | | | | The removed lines are already included in vr9_avm_fritz736x.dtsi Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [rephrase commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for TP-Link RE500 v1Christoph Krapp2020-07-077-125/+248
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device uses the same hardware as RE650 v1 which got supported in 8c51dde. Hardware specification: - SoC 880 MHz - MediaTek MT7621AT - 128 MB of DDR3 RAM - 16 MB - Winbond 25Q128FVSG - 4T4R 2.4 GHz - MediaTek MT7615E - 4T4R 5 GHz - MediaTek MT7615E - 1x 1 Gbps Ethernet - MT7621AT integrated - 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2)) - 4x buttons (Reset, Power, WPS, LED) - UART header (J1) - 2:GND, 3:RX, 4:TX Serial console @ 57600,8n1 Flash instructions: Upload openwrt-ramips-mt7621-tplink_re500-v1-squashfs-factory.bin from the RE500 web interface. TFTP recovery to stock firmware: Unfortunately, I can't find an easy way to recover the RE without opening the device and using modified binaries. The TFTP upload will only work if selected from u-boot, which means you have to open the device and attach to the serial console. The TFTP update procedure does *not* accept the published vendor firmware binaries. However, it allows to flash kernel + rootfs binaries, and this works if you have a backup of the original contents of the flash. It's probably possible to create special image out of the vendor binaries and use that as recovery image. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [remove dts-v1 in DTSI, do not touch WiFi LEDs for RE650, keep state_default in DTS files, fix label-mac-device, use lower case for WiFi LEDs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: dts: Move the &usb_vbus nodes out of &gpioMartin Blumenstingl2020-07-068-96/+96
| | | | | | | | | | | | | | | | | | | | Move the USB VBUS regulator nodes out of the GPIO controller node. This fixes a problem where the "regulator-fixed" driver wasn't probed for these regulators because the GPIO driver doesn't scan the child-nodes and based on the dt-bindings documentation it's not supposed to. This fixed the following error reported by Luca Olivetti: ... dwc2 1e101000.usb: DWC OTG Controller dwc2 1e101000.usb: new USB bus registered, assigned bus number 1 dwc2 1e101000.usb: irq 62, io mem 0x1e101000 dwc2 1e101000.usb: startup error -517 dwc2 1e101000.usb: USB bus 1 deregistered dwc2 1e101000.usb: dwc2_hcd_init() FAILED, returning -517 Fixes: FS#1634 Cc: Luca Olivetti <luca@ventoso.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ravpower-mcu: add missing PKG_RELEASEDavid Bauer2020-07-061-0/+1
| | | | | | This fixes the imagebuilder for this device. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel/pcengines-apu2: detect apuv4 boardMatthew Gyurgyik2020-07-061-0/+50
| | | | | | | | | | | | Upstream commit 3d00da1de3 ("platform/x86: pcengines-apuv2: detect apuv4 board") On 5.4, this module fails on APUv4 due to non-matching DMI data. With this patch, the module will match DMI data for the APUv4. Signed-off-by: Matthew Gyurgyik <matthew@gyurgyik.io> [include upstream patch description] Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: added switch-config for ARV752DPWLars Wessels2020-07-061-0/+1
| | | | | | | | | | Add missing switch config (4 LAN-Ports + CPU). Grey WAN port (used for ADSL) is not part of the switch. Signed-off-by: Lars Wessels <software@bytebox.org> [rework commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: wifi mac fix for ARV752DPWLars Wessels2020-07-062-2/+8
| | | | | | | | | | | | Set wifi mac from flash partition 'board_config' to match the label on the device (Easybox 802). Currently the wifi mac is always set to 00:0c:43:28:60:00. eth0 and WiFi will now share the same mac (as in original firmware). Signed-off-by: Lars Wessels <software@bytebox.org> [improve commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: allow ACS restriction with fixed channelJan Hoffmann2020-07-061-1/+1
| | | | | | | | | | | This can be useful when a DFS channel is configured, as the ACS channel list is taken into account when switching channels after a radar event. For example, this allows to prevent the SRD channels from being used in that case. Signed-off-by: Jan Hoffmann <jan@3e8.eu> [reorder structure] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: reduce spi-max-frequency for ipTIME A8004TSunguk Lee2020-07-061-2/+1
| | | | | | | | | | | | | | | | | | | Reduce spi-max-frequency for ipTIME A8004T and disable m25p,fast-read option. A8004T uses `en25qh128` for the MTD. This flash memory would allow 80MHz, sometimes kernel received wrong id value in initramfs installed router. (kernel expected `1c 70 18 1c 70 18`, but one of cases, it was `9c 70 18 1c 70 18`) In this case, openwrt can't detect the partition information, it would write the inccorect data to the firmware partition and also it would occur the bootlooping after sysupgrade. Signed-off-by: Sunguk Lee <d3m3vilurr@gmail.com> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: move serial0 to DTSI filesAdrian Schmutzler2020-07-0616-14/+12
| | | | | | | | | | | | | | All device DTS files in the target set the serial0 property to the same value (*). So, let's move the definitions to the DTSI files. That's also where the kernel defines it (qcom-ipq8064-v1.0.dtsi). * The only exception is ipq8064-db149, which defines "serial0 = &uart2;", but inside a block called "alias" instead of "aliases". It must be assumed that this is broken anyway, so we don't touch it here. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: move stdout-path to DTSI filesAdrian Schmutzler2020-07-0617-38/+16
| | | | | | | | | All device DTS files in the target set the stdout-path to the same value. So, let's move the definitions to the DTSI files. That's also where the kernel defines it (qcom-ipq8064-v1.0.dtsi). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: disentangle and clean up SoC DTSI filesAdrian Schmutzler2020-07-064-64/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far, the DTSI files on ipq806x had a linear inheritance: qcom-ipq8064.dtsi v qcom-ipq8064-v1.0.dtsi v qcom-ipq8064-v2.0.dtsi v qcom-ipq8065.dtsi This poses problems when one wants to set something that is specific to an architecture closer to the top of the tree. In this patch, we remove the chain-like inheritance and have all other files derived from qcom-ipq8064.dtsi (changing this name to something more generic is not possible due to upstream use). The removal of inheritance will require a few entries to be copied from qcom-ipq8064-v2.0.dtsi to qcom-ipq8065.dtsi. However, it also opens an opportunity for some clean-up: - Many definitions can be improved by just using the innermost labels. - Instead of disabling the CPU_SPC node for ipq8065, it is now off by default and enabled where needed. - Instead of patching phy-tx0-term-offset into qcom-ipq8064.dtsi and then having it changed for qcom-ipq8064-v2.0/qcom-ipq8065, just have the appropriate settings done in the lower DTSI files directly. - For the opp_table0 adjustments for ipq8065, just redefine what's changed, but don't add all the untouched properties again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: move common pinmux nodes to SoC DTSISungbo Eo2020-07-0615-603/+61
| | | | | | | | | | | | | | | | As almost same pinmux nodes are repeated in each device dts, let's define them once in the ipq8064 dtsi and remove the rest. * uart0_pins : Did not touch. * i2c4_pins : This node seems to be not used at all in dts. Added the most common form in the dtsi. Did not touch rpm_pins. * spi_pins : The common mux node is already present in the dtsi. Removed the duplicate nodes from dts. * nand_pins : Moved the entire node. * mdio0_pins : Moved the common mux node. * rgmii2_pins: Moved the common mux node. "pins" property is overrided in ap161. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ar71xx: Fix mikrotik NAND compile problemHauke Mehrtens2020-07-061-1/+1
| | | | | | | There is one closing bracket too much. Fixes: ce958dd88a7e ("kernel: Update kernel 4.14 to version 4.14.187") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: Update linux-firmware to 20200619John Audia2020-07-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20200122..20200619 e96c121 (tag: 20200619, origin/main) amdgpu: update renoir firmware from 20.20 release db0402e amdgpu: update picasso firmware from 20.20 release c4e6e8f amdgpu: update raven2 firmware from 20.20 release 1967282 amdgpu: update raven firmware from 20.20 release f73f82c amdgpu: add vega20 TA firmware from 20.20 release 9ecaba8 amdgpu: update vega20 firmware from 20.20 release 3866af1 amdgpu: update vega12 firmware from 20.20 release adba945 amdgpu: update vega10 firmware from 20.20 release 3c5eef0 amdgpu: update navi10 firmware from 20.20 release 152c929 amdgpu: update navi14 firmware from 20.20 release 3890db3 (HEAD -> master, origin/master, origin/HEAD) rtl_nic: add firmware for RTL8125B 887d2a1 linux-firmware: Update firmware file for Intel Bluetooth AX200 3914943 linux-firmware: Update firmware file for Intel Bluetooth AX201 4966923 linux-firmware: Update firmware file for Intel Bluetooth 9560 5ee82c0 linux-firmware: Update firmware file for Intel Bluetooth 9260 d9880b1 Mellanox: Add new mlxsw_spectrum firmware xx.2007.1168 c2e313b rtw88: RTL8822C: update firmware version to v9.9 4d91664 Merge branch 'mrvl-prestera' of https://github.com/PLVision/linux-firmware a54dfbe Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 51a773d cxgb4: Update firmware to revision 1.24.17.0 5611000 mrvl: add firmware for Prestera ASIC devices 8ba6fa6 (tag: 20200519) Merge tag 'iwlwifi-fw-2020-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 5ee1c7d iwlwifi: update and add new FWs from core50-70 and core52-81 releases 401bd6d rtw88: RTL8821C: add firmware file v24.5 2ae9974 iwlwifi: update FWs to core47-142 release 50c1340 iwlwifi: update 8265 FW f8d32e4 rtw88: update firmware information and README 412f95a linux-firmware: add firmware for MT7915E 619d339 QCA: Add Bluetooth firmware for QCA9377 1392591 linux-firmware: add rebb firmware for mt7663 b2cad6a linux-firmware: Update firmware file for Intel Bluetooth AX200 c5ac1ad linux-firmware: Update firmware file for Intel Bluetooth AX201 642d115 linux-firmware: Update firmware file for Intel Bluetooth 9560 dc3047c linux-firmware: Update firmware file for Intel Bluetooth 9260 78c0348 (tag: 20200421) Use Link function for brcmfmac43362-sdio.lemaker,bananapro.txt f2df706 Add symlink for Dell XPS 15 9550 Broadcom Bluetooth patch-ram file 87dcb0e rtl_bt: Update RTL8822C BT FW to 0x0999_3AA1 3aa3ae4 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 8aa36f5 cxgb4: Update T6 config file 6314fa0 amdgpu: update vega20 firmware for 20.10 1f308f1 amdgpu: update vega12 firmware for 20.10 1ffd569 amdgpu: update vega10 firmware for 20.10 9a0b0f4 amdgpu: update renoir firmware for 20.10 428a747 amdgpu: update raven2 firmware for 20.10 624ecdf amdgpu: update raven firmware for 20.10 7532f50 amdgpu: update picasso firmware for 20.10 75e352e amdgpu: update navi10 firmware for 20.10 3c175d1 amdgpu: update navi14 firmware for 20.10 8d7ac32 amdgpu: add navi14 TA firmware from 20.10 dd6b4db Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware 3afe520 cxgb4: Update firmware to revision 1.24.14.0 64dba0f Merge branch 'a630-zap' of https://github.com/andersson/linux-firmware 236ec45 linux-firmware: add firmware for MT7663 Wifi/BT combo device 107b9a2 Merge https://github.com/bgodavar/qca_bt_fw 5b240e5 Merge https://github.com/rjliao-qca/qca-btfw 47533bc linux-firmware: Update firmware file for Intel Bluetooth AX200 677930a linux-firmware: Update firmware file for Intel Bluetooth AX201 e6ff1e7 qcom: Add SDM845 Adreno ZAP shader firmware 1a8b0dc qca: Enable transparent WBS for WCN3991 4921f73 QCA: Add Bluetooth firmware for QCA6390 edf390c Merge branch 'v12573.77' of https://github.com/erinlo/linux_fw_scp 3c213aa mediatek: Add mt8183 SCP firmware 8eb0b28 (tag: 20200316) linux-firmware: Update firmware file for Intel Bluetooth AX200 b9f720f linux-firmware: Update firmware file for Intel Bluetooth AX201 426db50 linux-firmware: Update firmware file for Intel Bluetooth 9560 9361709 linux-firmware: Update firmware file for Intel Bluetooth 9260 3b3dd5a amdgpu: update vega20 firmware from 19.50 4871e7a amdgpu: update vega12 firmware from 19.50 4e7f0f8 amdgpu: update vega10 firmware from 19.50 fce60a9 rtl_bt: Add firmware and configuration files for RTL8822C BT UART chip d553c05 Merge branch 'tgl_huc_7.0.12_dmc_2.06' of git://anongit.freedesktop.org/drm/drm-firmware fb83402 i915: Add DMC firmware v2.06 for TGL 45d36b5 i915: add HuC firmware v7.0.12 for TGL 0148cfe Merge https://github.com/rjliao-qca/qca-btfw 94cb0a6 check_whence: python3/utf-8 support 7fa32bc Makefile: improve `make check` usefulness 4bb6805 mediatek: Remove in-tree symlinks 6f50efe Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu 2db3978 qca: Fix blueooth firmware name for QCA6174 a8a18d1 mediatek: move MT8173 VPU FW to subfolder efcfa03 linux-firmware: Update firmware file for Intel Bluetooth AX201 83cb43e Merge https://github.com/bgodavar/qca_bt_wcn3991 54b017d qca: Add firmware files for BT chip wcn3991. 2277987 nvidia: add TU116/117 signed firmware f63922d drm/amdgpu: update to latest 19.50 firmware for raven 1168a90 Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.4 0bd965d mediatek: update MT8173 VPU firmware to v1.1.4 6f89735 rtl_nic: update firmware for RTL8153A 5351afe rtl_bt: Update RTL8822C BT FW to V0x0998_C2B4 83a7c50 linux-firmware: add firmware for MT7622 feb91a4 linux-firmware: add version 2 for MT7615E b791e15 amdgpu: update to latest navi10 firmware from 19.50 0ff2f37 Revert "radeon: update oland rlc microcode from amdgpu" c2df39a Merge branch 'amlogic-vdec' of https://github.com/Elyotna/linux-firmware fb505a6 amlogic: update video decoder firmwares 6d9f399 amdgpu: add renoir firmware for 19.50 2c08b38 amdgpu: update raven2 firmware for 19.50 8846543 Merge commit '779514ec044a75ee6c9c20e52a2bf291f80d7d4e' of https://github.com/Netronome/linux-firmware 74d71b6 Merge branch 'bt-20200122' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware 779514e nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.12.A.13 3055060 qca: update bluetooth firmware for QCA6174 Signed-off-by: John Audia <graysky@archlinux.us>
* mvebu: config define i2c pxa slaveScott Roberts2020-07-041-0/+1
| | | | | | | | | We are setting CONFIG_I2C_PXA is not set If you do set pxa to y then you have issues if you do not have CONFIG_I2C_PXA_SLAVE is not set Fixes: dd13add3ceed ("kernel: i2c-pxa: remove slave") Signed-off-by: Scott Roberts <ttocsr@gmail.com>
* mvebu: LS421DE: use automatic fan control with thermal zonesDaniel González Cabanelas2020-07-042-3/+67
| | | | | | | | | | | | | | | | The Buffalo Linkstation LS421DE has a chassis fan for cooling two internal hard drives. Currently there is no control over this fan, running always at fixed medium speed. With the recent jump to the kernel 5.4, now we can monitor the hard drive temperature and control the fan with thermal zones. Install the kmod-hwmon-drivetemp module and wire up a thermal zone on the dts file to allow automatic fan control by the kernel. Tested succesfully using a single Crucial BX500 SSD drive. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* kernel: Update kernel 5.4 to version 5.4.50Hauke Mehrtens2020-07-0455-383/+100
| | | | | | | Run tested: ath79, ipq40xx Build tested: ath79, ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Update kernel 4.19 to version 4.19.131Hauke Mehrtens2020-07-0454-398/+131
| | | | | | | | | | | | | Fixes: - CVE-2020-10757 The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was backported which needed some adaptations to other code. Run tested: ath79 Build tested: ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Update kernel 4.14 to version 4.14.187Hauke Mehrtens2020-07-0435-79/+74
| | | | | | | | | | | | Fixes: - CVE-2020-10757 The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was backported which needed some adaptations to other code. Build tested: ramips Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libjson-c: update to 0.14DENG Qingfang2020-07-047-210/+191
| | | | | | | | | | | Update libjson-c to 0.14 Changelog: https://github.com/json-c/json-c/wiki/Notes-for-v0.14-release Switch to CMake because the upstream build system was changed ipk size increased by 2KB Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* kernel: Fix ath79 DSP exception at bootupHauke Mehrtens2020-07-042-0/+122
| | | | | | | | | | | This resolves a hazard between a mtc0 and a mfc0 instruction after activating the DSP support. Without this fix the CPU could use the old value again and the DSP support would not be active. Fixes: FS#2928, FS#2899 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ath79/tl-wdr3600; ath79/tl-wdr4300] Tested-by: David Bauer <mail@david-bauer.net> [ocedo_koala/ocedo_raccoon]
* build,json: fix build failure in case no data is foundDaniel Golle2020-07-031-18/+16
| | | | | | | | Only collect arch_packages if actually generating any output. Fixes: commit f09b9319 ("build,json: store arch_packages in profiles.json"( Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Paul Spooren <mail@aparcar.org>
* ath79: add support for GL.iNet GL-MiFiAntti Seppälä2020-07-034-0/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the ar71xx supported GL.iNet GL-MiFi to ath79. Specifications: - Atheros AR9331 - 64 MB of RAM - 16 MB of FLASH (SPI NOR) - 2x 10/100/1000 Mbps Ethernet - 2.4GHz (AR9330), 802.11b/g/n - 1x USB 2.0 (vbus driven by GPIO) - 4x LED, driven by GPIO - 1x button (reset) - 1x mini pci-e slot (vcc driven by GPIO) Flash instructions: Vendor software is based on openwrt so you can flash the sysupgrade image via the vendor GUI or using command line sysupgrade utility. Make sure to not save configuration over reflash as uci settings differ between versions. Note on MAC addresses: Even though the platform is capable to providing separate MAC addresses to the interfaces vendor firmware does not seem to take advantage of that. It appears that there is only single unique pre-programmed address in the art partition and vendor firmware uses that for every interface (eth0/eth1/wlan0). Similar behaviour has also been implemented in this patch. Note on GPIOs: In vendor firmware the gpio controlling mini pci-e slot is named 3gcontrol while it actually controls power supply to the entire mini pci-e slot. Therefore a more descriptive name (minipcie) was chosen. Also during development of this patch it became apparent that the polarity of the signal is actually active low rather than active high that can be found in vendor firmware. Acknowledgements: This patch is based on earlier work[1] done by Kyson Lok. Since the initial mailing-list submission the patch has been modified to comply with current openwrt naming schemes and dts conventions. [1] http://lists.openwrt.org/pipermail/openwrt-devel/2018-September/019576.html Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
* ipq806x: refresh configJohn Audia2020-07-031-15/+5
| | | | | | | | | | | | Based on "make kernel_menuconfig CONFIG_TARGET=generic" and 5.4.49 CONFIG_LEDS_TRIGGER_DISK has been removed by the refresh and added back manually in order to not revert f93fcf8923aa ("ipq806x: enable disk-activity LED trigger"). Signed-off-by: John Audia <graysky@archlinux.us> [extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kirkwood: support for button in Pogoplug V4Sungbo Eo2020-07-031-1/+2
| | | | | | | Pogoplug V4 has a reset button on a GPIO pin. To use it, kmod-gpio-button-hotplug package needs to be installed. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: drop redundant status for gpio target-wideAdrian Schmutzler2020-07-0337-136/+0
| | | | | | | | All definitions of gpio in SoC DTSI files do not set status, i.e. have it enabled. This drops all remaining redundant "status = okay" definitions in descendent files (mostly older ones). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: enable gpio on ar933x by defaultAdrian Schmutzler2020-07-0316-60/+0
| | | | | | | | | | | All other SoC DTSI files have gpio enabled by default, only ar9330/ar9331 disable it by default, only to have it enabled again afterwards for each individual device. So, do not disable it in the first place, and drop all device-specific status statements afterwards. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Compex WPJ344Leon M. George2020-07-034-0/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SoC: AR9344 DRAM: 128MB DDR2 Flash: 16MB SPI-NOR 2 Gigabit ethernet ports 2×2 2.4GHz on-board radio miniPCIe slot that supports 5GHz radio PoE 48V IEEE 802.3af/at - 24V passive optional USB 2.0 header Installation: To install, either start tftp in bin/targets/ath79/generic/ and use the u-boot prompt over UART: tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize erase 0x9f680000 +1 cp.b $fileaddr 0x9f030000 $filesize boot The cpximg file can be used with sysupgrade in the stock firmware (add SSH key in luci for root access) or with the built-in cpximg loader. The cpximg loader can be started either by holding the reset button during power up or by entering the u-boot prompt and entering 'cpximg'. Once it's running, a TFTP-server under 192.168.1.1 will accept the image appropriate for the board revision that is etched on the board. For example, if the board is labelled '6A08': tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj344-16m-squashfs-cpximg-6a08.bin MAC addresses: <&uboot 0x2e010> *:99 (label) <&uboot 0x2e018> *:9a <&uboot 0x2e020> *:9b <&uboot 0x2e028> *:9c Only the first two are used (for ethernet), the WiFi modules have separate (valid) addresses. The latter two addresses are not used. Signed-off-by: Leon M. George <leon@georgemail.eu> [minor commit message adjustments, drop gpio in DTS, DTS style fixes, sorting, drop unused cpximg recipe] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build,json: store arch_packages in profiles.jsonPaul Spooren2020-07-031-2/+5
| | | | | | | | | The `arch_packages` contains the supported package architecture. Previously it was necessary to parse the `Packages` index for the line `Architecture:`, requiring both an additional parser and file download. Signed-off-by: Paul Spooren <mail@aparcar.org>
* odhcpd: bump to latest git HEADHans Dedecker2020-07-021-3/+3
| | | | | | 5da5299 odhcpd: fix compilation with GCC10 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath79: rearrange nand node by register addressSungbo Eo2020-07-022-36/+36
| | | | | | | All other nodes in the DTS are placed in order of address space. Harmonize the nand nodes as well. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* curl: bump to 7.71.0Hans Dedecker2020-07-012-5/+5
| | | | | | For changes in 7.71.0; see https://curl.haxx.se/changes.html#7_71_0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath10k-ct: update to version 2020-06-30Álvaro Fernández Rojas2020-07-014-14/+14
| | | | | | | | Backports commit "a1769bb68a850508a492e3674ab1e5e479b11254", which reverts upstream commit "76d164f582150fd0259ec0fcbc485470bcd8033e" (ath10k: fix DMA related firmware crashes on multiple devices). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* build: store default/device packages in JSONPaul Spooren2020-06-303-2/+20
| | | | | | | | | | | | With this commit the `profiles.json` contain both the target specific `default_packages` as well as the device specific `device_packages` as a array of strings. This information is required for downstream projects like the various web-based interactive firmware generators. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Paul Spooren <mail@aparcar.org>
* dropbear: bump to 2020.80Hans Dedecker2020-06-304-78/+2
| | | | | | | | | - drop patches (applied upstream) * 001-backport_GNU_SOURCE-for-random.patch * 002-backport-move-GNU_SOURCE-earlier.patch * 010-backport-disable-toom-and-karatsuba.patch Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* zram-swap: init: replace backticks with $()Rui Salvaterra2020-06-301-4/+4
| | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [add commit description] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* dropbear: init: replace backticks with $()Rui Salvaterra2020-06-301-3/+3
| | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [add commit description] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for TP-Link RE220 v2Rowan Border2020-06-305-0/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE220 v2 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN. This port of OpenWRT leverages work done by Andreas Böhler <dev@aboehler.at> for the TP-Link RE200 v2 as both devices share the same SoC, flash layout and GPIO pinout. Specifications MediaTek MT7628AN (580 Mhz) 64 MB of RAM 8 MB of FLASH 2T2R 2.4 GHz and 1T1R 5 GHz 1x 10/100 Mbps Ethernet UART header on PCB (57600 8n1) 8x LED (GPIO-controlled), 2x button There are 2.4G and 5G LEDs in red and green which are controlled separately. Web Interface Installation It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Signed-off-by: Rowan Border <rowanjborder@gmail.com>
* kernel: cake: backport upstream tweaks & fixesKevin Darbyshire-Bryant2020-06-3013-14/+752
| | | | | | | | | | | | | | | | From upstream: b8392808eb3f sch_cake: add RFC 8622 LE PHB support to CAKE diffserv handling 3f608f0c4136 sch_cake: fix a few style nits 8c95eca0bb8c sch_cake: don't call diffserv parsing code when it is not needed 9208d2863ac6 sch_cake: don't try to reallocate or unshare skb unconditionally From netdev not yet accepted: sch_cake: fix IP protocol handling in the presence of VLAN tags The VLAN tag handling is actually wider than just cake so upstream are working out how to fix it generically. We fix it here just for cake. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: cake: backport unused var patch to 5.4Kevin Darbyshire-Bryant2020-06-302-0/+158
| | | | | | | This was backported to 4.19 and I clearly expected it to land in 5.4 but it didn't (5.5) so backport it to 5.4 for consistency. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: cake: skb hash backport to 419Kevin Darbyshire-Bryant2020-06-301-0/+170
| | | | | | | Commit 7b4877c2040a63332cd1f10023c51698fec2ed98 backported to 5.4 only, backport to 4.19 as well. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 14:29:39 +0000