aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* CI: labeler: target major version of labeler actionChristian Marangi2022-11-271-1/+1
| | | | | | | | Target major version of labeler to include minor fixes and use always the latest major version with included fixes. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 5fb7232bc0592cb2e1818fa47dfaecc291c8514e)
* build: harden GitHub workflow permissionsAlex Low2022-11-273-0/+13
| | | | | | | | | | Grant pull-requests write permission to the labeler workflow and read-only to everything else. Signed-off-by: Alex Low <aleksandrosansan@gmail.com> [ wrap to 80 columns and fix wrong author as requested by author itself ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 715259940776843d8799bc39de8eb50eb764189b)
* CI: include automatic Pull Request LabelerPiotr Dymacz2022-11-272-0/+115
| | | | | | | | | | | | | | | | | | | | This adds GitHub CI action which makes use of 'Labeler', allowing automatic labeling of new PRs, based on the modified files paths. Below labels are supported and more can be added later: - 'target/*' - 'target/imagebuilder' - 'kernel' - 'core packages' - 'build/scripts/tools' - 'toolchain' - 'GitHub/CI' For more information: https://github.com/marketplace/actions/labeler Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 4f42566d47999c392c8ea41dc27215b43ed9ee40)
* ipq40xx: luma_wrtq-acn329: swap ethernet MAC addressesTomasz Maciej Nowak2022-11-271-0/+5
| | | | | | | Adjust them according to OEM firmware. Fixes: e24635710c7e (" ipq40xx: add support for Luma Home WRTQ-329ACN") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: mikrotik: use OpenWrt loader for initram imageJohn Thomson2022-11-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Return to using the OpenWrt kernel loader to decompress and load kernel initram image. Continue to use the vmlinuz kernel for squashfs. Mikrotik's bootloader RouterBOOT on some ath79 devices is failing to boot the current initram, due to the size of the initram image. On the ath79 wAP-ac: a 5.7MiB initram image would fail to boot After this change: a 6.6MiB initram image successfully loads This partially reverts commit e91344776b9ba7c864be88d915c9c0df0eb790dd. An alternative of using RouterBOOT's capability of loading an initrd ELF section was investigated, but the OpenWrt kernel loader allows larger image. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> (cherry picked from commit 62b72eafe49d2eecd3692691152ed86a0327fcb0) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Fixes: #9954
* kernel: add kmod-hwmon-sht3x supportUwe Kleine-König2022-11-271-0/+15
| | | | | | | | The driver supports the temperature and humidity sensors chips SHT3x and STS3x by Sensirion. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> (cherry picked from commit cec9cbef449daea6529fbda64777ff1b7ae4e499)
* procd: service: pass all arguments to serviceAndrew Ammerlaan2022-11-271-3/+3
| | | | | | | | | | Passing all arguments to /etc/init.d/$service restores the behaviour of openwrt 21.02. This is relevant for services such as etherwake which take more then one argument, e.g.: "service etherwake start <list of devices to wake>" Signed-off-by: Andrew Ammerlaan <andrewammerlaan@gentoo.org> (cherry picked from commit b2e83c16e1383eb817c1f34d7118b01cefa670d8)
* ath79: fix MAC address assigment for TP-Link TL-WR740N/TL-WR741ND v4Will Moss2022-11-271-3/+2
| | | | | | | | On TP-Link TL-WR740N/TL-WR741ND v4 LAN MAC address (eth1 in DTS) is main device MAC address, so do not increment it. WAN MAC is LAN MAC + 1. Signed-off-by: Will Moss <willormos@gmail.com> (cherry picked from commit 288b0004bfa981e3dbb8678ee3289509c3930217)
* tools/patch: apply patch for EACCES on xattr copyThomas Weißschuh2022-11-272-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When compiling OpenWRT on a compressed btrfs volume the build fails in libtool. The file `libltdl/config/ltmain.m4sh` from `libtool-2.4.2.tar.xz` is missing write permissions, therefore patch falls back to copying the file and patching that. During this patch tries to preserve all file attribute on the new copy. However the attribute `btrfs.compression` is privileged and btrfs return EACCES. While patch ignores multiple other error codes during the copy of xattr copy it is not prepared for EACCES and aborts. EACCES should be ignored the same way as the other errors. Build log: ``` ... Applying ./patches/000-relocatable.patch using plaintext: patching file libltdl/config/general.m4sh patching file libtoolize.in patching file libtoolize.m4sh patching file libltdl/m4/libtool.m4 Applying ./patches/100-libdir-fixes.patch using plaintext: patching file libltdl/config/ltmain.m4sh File libltdl/config/ltmain.sh is read-only; trying to patch anyway patching file libltdl/config/ltmain.sh patch: setting attribute btrfs.compression for btrfs.compression: Permission denied Patch failed! Please fix ./patches/100-libdir-fixes.patch! ``` Link: https://lists.gnu.org/archive/html/bug-patch/2022-11/msg00000.html Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de> (cherry picked from commit 0d375de10dac3160c65c264bb91a5137ef4c0817)
* wolfssl: update to v5.5.3Nick Hainke2022-11-273-53/+3
| | | | | | | | | | | | | | | Remove "200-ecc-rng.patch" because it was upstramed by: https://github.com/wolfSSL/wolfssl/commit/e2566bab2122949a6a0bb2276d0a52598794d7d0 Refreshed "100-disable-hardening-check.patch". Fixes CVE 2022-42905. Release Notes: - https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.2-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.3-stable Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 745f1ca9767716c43864a2b7a43ed60b16c25560)
* ath79: D-Link DIR-825 B1 add factory.bin recipeWill Moss2022-11-271-4/+6
| | | | | | | | | | | - Bring back factory.bin image which was missing after porting device to ath79 target - Use default sysupgrade.bin image recipe - Adjust max image size according to new firmware partition size after "ath79: expand rootfs for DIR-825-B1 with unused space (aca8bb5)" changes - Remove support of upgrading from version 19.07, because partition size changes mentioned above Signed-off-by: Will Moss <willormos@gmail.com> (cherry picked from commit a58146d452c50387256d4a616c055ddf3248496f)
* mbedtls: import patch to fix illegal instruction on mpc85xxNick Hainke2022-11-271-0/+30
| | | | | | Import patch as workaround for gcc-11.2.0. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mt76: add firmware package for mt7916Andrew Powers-Holmes2022-11-271-0/+16
| | | | | | | | | | | Add kernel package 'mt7916-firmware' with firmware files for MT7916E devices. These share the same driver as the MT7915 chipset, but use their own firmware. Tested using a pair of AsiaRF AW7916-NPD cards. Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net> (cherry picked from commit 94d0cb9d2ec23fb15acd1fc17a351983f8771d13)
* ath79: disable image building for Ubiquiti EdgeSwitch 8XPRoger Pueyo Centelles2022-11-271-0/+1
| | | | | | | | | | | The downstream OpenWrt driver for the BCM53128 switch ceased to work, rendering the 8 LAN ports of the device unusable. This commit disables image building while the problem is being solved. See issue #10374 for more details. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 5a1d7d8c1b422827673b13a034473683f5af3d6f)
* lantiq: add 6.1 tag to upstream patchAleksander Jan Bajkowski2022-11-271-2/+3
| | | | | | | | Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 802ca492d85e6f6af05676518889d4de50697477)
* lantiq: enable interrupts on second VPEsAleksander Jan Bajkowski2022-11-271-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is needed to handle interrupts by the second VPE on the Lantiq ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to the second VPE results in a hang. Currently, the vsmp_init_secondary() function is responsible for enabling these interrupts. It only enables Malta-specific interrupts (SW0, SW1, HW4 and HW5). The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware interrupts are wired to an ICU instance. Each VPE has an independent instance of the ICU. The mapping of the ICU interrupts is shown below: SW0(IP0) - IPI call, SW1(IP1) - IPI resched, HW0(IP2) - ICU 0-31, HW1(IP3) - ICU 32-63, HW2(IP4) - ICU 64-95, HW3(IP5) - ICU 96-127, HW4(IP6) - ICU 128-159, HW5(IP7) - timer. This patch enables all interrupt lines on the second VPE. This problem affects multithreaded SoCs with a custom interrupt controller. SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the future, this may be replaced with some generic solution. Tested on Lantiq xRX200. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit fbd33d61648ae8982fbada7ad3b6d8222b367ab5)
* lantiq: xrx200: backport upstream network fixesAleksander Jan Bajkowski2022-11-273-0/+93
| | | | | | | | This series contains bug fixes that may occur under memory pressure. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 9423fc424c7313e470f61224eeebbaee3ff477a2)
* kernel: bump 5.10 to 5.10.156John Audia2022-11-2711-26/+26
| | | | | | | | | Manually rebased: ath79/patches-5.10/910-unaligned_access_hacks.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit acb10faa35748ca3a7e0f559c431a1a752fdc529)
* kernel: bump 5.10 to 5.10.155John Audia2022-11-273-9/+9
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 9e137bb10e2652dd1eb826e228d9842f872789f9)
* kernel: modules: package Marvell gigE PHY driverDaniel Golle2022-11-261-0/+34
| | | | | | | | | | | | | | | | | | | | Some copper SFP modules come with Marvell's 88E1xxx PHY and need this module to function. Package it, so users can easily install this PHY driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP. Without marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22 sfp sfp2: sfp_add_phy failed: -22 With marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL) mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ebe2b7190b7d8815a588eaf8a5cfdf9edfd85c36)
* bcm27xx: fix CI build after config refreshÁlvaro Fernández Rojas2022-11-264-0/+8
| | | | | | | | | As reported by @kuanyili on Github, commit 3564c22e46d5 broke CI build: https://github.com/openwrt/openwrt/commit/3564c22e46d5b025b174ee9b25291413a4621b21#commitcomment-91091149 Adding back those symbols fixes the problem. Fixes: 3564c22e46d5 ("bcm27xx: disable duplicate sdhost driver") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: disable duplicate sdhost driverJohn Audia2022-11-234-16/+9
| | | | | | | | | | | | | | | | | Enabling both CONFIG_MMC_BCM2835 and CONFIG_MMC_BCM2835_SDHOST causes this error in dmesg: Error: Driver 'sdhost-bcm2835' is already registered, aborting... Disabling CONFIG_MMC_BCM2835 and leaving CONFIG_MMC_BCM2835_SDHOST enabled avoids this error. Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me> [Disable driver for all subtargets, refresh configs, tweak description] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 3f7cc9d0144dbc429d19c1801cc6be149f969db9)
* kernel: support "linux,rootfs" DT property for splitting rootfsRafał Miłecki2022-11-211-5/+6
| | | | | | | | | | OpenWrt's support for splitting rootfs (to create an extra "rootfs_data" partition) is limited to partitions called "rootfs". Upstream kernel allows any name partition to be rootfs if it has "linux,rootfs" property set. Add split support to such partitions in OpenWrt code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e4770db163a9585c43bb70dc5d6d1e45ef848e4a)
* bcm53xx: update DTS files with the latest changesRafał Miłecki2022-11-2117-7/+2144
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8cdafa149eda4e343905ccf00cad34ff2b52c85b)
* kernel: improve description of NTFS kernel packagesRafał Miłecki2022-11-211-2/+3
| | | | | | | This helps choosing the right NTFS driver from two available options. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b066ad7d9aa5221bfd334a3017abe9bcd171b33f)
* kernel: backport support for "linux,rootfs" in DTRafał Miłecki2022-11-219-51/+95
| | | | | | | | | | This DT property allows marking flash partition that Linux should use as a root device. It's useful for devices that don't use U-Boot and cmdline parser for partitioning. It may be used with "fixed-partitions" or some dynamic partitioning based on flash content. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d33e49857e3ad76586ebe55334996b15cd45ca1b)
* kernel: split out mtd hack for CONFIG_FIT_PARTITION + rootfsRafał Miłecki2022-11-213-4/+20
| | | | | | | | | This is some hack on top of our old hack. Use separated patch for it so it's easier to understand and actually possible to describe. We should ideally get rid of this (and we actually did with kernels 5.15+). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6a64eb2664c13bc7d6800747066603c27fcad8e0)
* ipq40xx: ZTE MF286D: fix DEVICE_PACKAGESLech Perczak2022-11-131-1/+1
| | | | | | | | | | Backporting ZTE MF289F introduced an override of DEVICE_PACKAGES for MF286D, which removed packages needed for built-in modem support. Fix assignment type to restore those. Fixes: 3e15a54bb0ef ("ipq40xx: Add ZTE MF289F") Reported-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* generic: fix unset symbolDavid Bauer2022-11-131-0/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.10 to 5.10.154John Audia2022-11-138-9/+9
| | | | | | | | | | All patches automatically rebased. Compile-tested: x86/64 Run-tested: x86/64 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit e7bd3767a96a8a84be7ea4730798a7a08dbb20d0)
* kernel: bump 5.10 to 5.10.153John Audia2022-11-1311-38/+37
| | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 87edb650c74a73d854bc01c0aed46d38dafb09a0)
* ramips: improve compatibility for Youku YK-L2 and YK-L1 seriesShiji Yang2022-11-124-2/+10
| | | | | | | | | | | | | | | Add UIMAGE_NAME and UIMAGE_MAGIC to allow users to directly install initramfs-kernel.bin from the stock firmware Web UI. At the same time, this change makes it possible to boot OpenWrt with the official u-boot. Notice: Since the stock firmware is based on OpenWrt and the configuration will be retained by default during the upgrade process, so we must use initramfs-kernel.bin to do a initial installation. After the system restarts, install sysupgrade.bin and do not retain any configuration. Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit eba0a8deb65de70b0d913f9ec8910640a79d0191)
* ramips: gl-mt1300: downclock SPI to 50MHzMichael Lyle2022-11-121-2/+1
| | | | | | | | | | | | | | | | The SPI max frequency was set to 80MHz, considerably higher than the vendor clocks it in their firmware (10MHz). Multiple users reported jffs2 corruption/instability in GitHub issue #10461. My unit has a W25Q256; datasheet specifies maximum SPI frequency for read command of 50MHz. Thanks to @DragonBlueP for suggesting to eliminate m25p,fast-read; and @MPannen1979 for identifying the problem. Fixes: #10461 Signed-off-by: Michael Lyle <mlyle@lyle.org> (cherry picked from commit 961e01fc67e7d9e60557df3474fa326216aa4839)
* ramips: mt7621: use seama-lzma-loader for D-Link DIR-860L B1Szabolcs Hubai2022-11-121-4/+1
| | | | | | | | | | | | | | | Fix the LZMA ERROR 1 with a single line of recipe instead of duplicating "uimage-lzma-loader". While reviewing my original submission of commit ce1957100411 David suggested to use $(Device/uimage-lzma-loader), but due to the specific needs of the vendor bootloader that simple oneliner didn't work. The new $(Device/seama-lzma-loader) is for those SEAMA capable bootloaders. Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com> (cherry picked from commit 18801f26485e3a0dcb79dc9f9b174aed5821b758)
* ramips: rt3883: use seama-lzma-loader for D-Link DIR-645Szabolcs Hubai2022-11-121-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the support topic [0] of the GitHub issue #10634 it was found out (based on boot logs) that the uimage-lzma-loader (commit 09faa73c53bd) never worked, as an earlier workaround (commit 6fba88de1913) negated the recipe: 3: System Boot system code via Flash. ## Booting image at bc050000 ... raspi_read: from:50000 len:40 .raspi_read: from:50000 len:c .raspi_read: from:50000 len:1fa000 ................................We have SEAMA, Image Size = 2072512 Verifying Checksum ... Uncompressing SEAMA linux.lzma ... OK ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 64 Starting kernel ... [ 0.000000] Linux version 5.4.188 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16554-1d4dea6d4f)) #0 Sat Apr 16 12:59:34 2022 [ 0.000000] SoC Type: Ralink RT3883 ver:1 eco:5 [ 0.000000] printk: bootconsolde [early0] enabled [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) [ 0.000000] MIPS: machine is D-Link DIR-645 [ 0.000000] Initrd not found or empty - disabling initrd Using the new seama-lzma-loader it's able to boot OpenWrt 22.03 and OpenWrt SNAPSHOT too: 3: System Boot system code via Flash. ## Booting image at bc050000 ... raspi_read: from:50000 len:40 .raspi_read: from:50000 len:c .raspi_read: from:50000 len:48b004 .........................................................................We have SEAMA, Image Size = 4763588 Verifying Checksum ... Uncompressing SEAMA linux.lzma ... OK ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 64 Starting kernel ... OpenWrt kernel loader for MIPS based SoC Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> Decompressing kernel... done! Starting kernel at 80000000... [ 0.000000] Linux version 5.10.144 (xabolcs@ut2004) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20774+2-b71affaf8b) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 Tue Sep 27 23:02:30 2022 [ 0.000000] SoC Type: Ralink RT3883 ver:1 eco:5 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) [ 0.000000] MIPS: machine is D-Link DIR-645 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 The OKLI Loader is unable to read the flash on this SoC: Looking for OpenWrt image... not found! ('0xddbaddba' at 0xbc051000) 0: https://forum.openwrt.org/t/136435 Fixes: GitHub issue #10634 ("V22.03.0 release currently does not work on D-Link DIR-645") Fixes: 09faa73c53bd ("ramips: rt3883: use lzma-loader for DIR-645") Tested-by: Glenn Fowler <gfowler1@outlook.com> Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com> (cherry picked from commit c293b492dfa114b67e90d5434edfeba17ba29980)
* ramips: define lzma-loader recipe for SEAMA devicesSzabolcs Hubai2022-11-121-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define "Device/seama-lzma-loader" recipe for SEAMA devices to help contributors avoid doing recipe mistakes. In a forum topic [0] I was under the impression that the good old uimage-lzma-loader didn't fix the LZMA ERROR 1 for a device. It was found out, that the uimage-lzma-loader never worked because the KERNEL variable was overriden earlier (also an LZMA ERROR 1 related commit, 6fba88de1913), and the "use lzma-loader" fix (commit 09faa73c53bd) didn't catch that to include the "loader-kernel" part. I contributed an LZMA ERROR 1 fix (commit ce1957100411) for the SEAMA device D-Link DIR-860L B1, where I had to duplicate the whole uimage-lzma-loader recipe because of the special needs of the vendor bootloader. This new recipe reuse most of uimage-lzma-loader's KERNEL definiton to avoid duplication. It uses "relocate-kernel" as it needed for D-Link DIR-860L B1 to boot from flash, and it's compatible with D-Link DIR-645 too. It repacks lzma-loader with lzma for kernel (without uImage), because these weird hacked vendor bootloaders accepts only LZMA compressed kernels from flash: We have SEAMA, Image Size = 4759794 Verifying Checksum ... Uncompressing SEAMA linux.lzma ... OK It uses uImage header for initramfs kernel to be little bit verbose. 0: https://forum.openwrt.org/t/136435/10 Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com> (cherry picked from commit e7ad68d682bdb73b7d13d6c4b8d1d65d9f050138)
* ath79: fix MAC address assignment for TP-Link ar7241 devicesWill Moss2022-11-121-4/+3
| | | | | | | | | | On TP-Link ar7241 devices LAN and WAN interfaces are swapped. Keeping that in mind fix MAC address assignment as used in vendor firmware: LAN MAC - main MAC stored in u-boot and printed on label WAN MAC - LAN MAC + 1 Signed-off-by: Will Moss <willormos@gmail.com> (cherry picked from commit 5a1af6ed621d4547d8bf486d0d3e4de5443b9b58)
* tools/expat: update to 2.5.0Alexander Couzens2022-11-121-3/+3
| | | | | | | | Fixes CVE-2022-43680 CVE-2022-40674. Switch to .xz archive to be closer to master. Changes: https://github.com/libexpat/libexpat/blob/R_2_5_0/expat/Changes Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ath79: add support for Linksys EA4500 v3Edward Chow2022-11-125-1/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Linksys EA4500 v3 wireless router Hardware -------- SoC: Qualcomm Atheros QCA9558 RAM: 128M DDR2 (Winbond W971GG6KB-25) FLASH: 128M SPI-NAND (Spansion S34ML01G100TFI00) WLAN: QCA9558 3T3R 802.11 bgn QCA9580 3T3R 802.11 an ETH: Qualcomm Atheros QCA8337 UART: 115200 8n1, same as ea4500 v2 USB: 1 single USB 2.0 host port BUTTON: Reset - WPS LED: 1x system-LED LEDs besides the ethernet ports are controlled by the ethernet switch MAC Address: use address(sample 1) source label 94:10:3e:xx:xx:6f caldata@cal_macaddr lan 94:10:3e:xx:xx:6f $label wan 94:10:3e:xx:xx:6f $label WiFi4_2G 94:10:3e:xx:xx:70 caldata@cal_ath9k_soc WiFi4_5G 94:10:3e:xx:xx:71 caldata@cal_ath9k_pci Installation from Serial Console ------------ 1. Connect to the serial console. Power up the device and interrupt autoboot when prompted 2. Connect a TFTP server reachable at 192.168.1.0/24 (e.g. 192.168.1.66) to the ethernet port. Serve the OpenWrt initramfs image as "openwrt.bin" 3. To test OpenWrt only, go to step 4 and never execute step 5; To install, auto_recovery should be disabled first, and boot_part should be set to 1 if its current value is not. ath> setenv auto_recovery no ath> setenv boot_part 1 ath> saveenv 4. Boot the initramfs image using U-Boot ath> setenv serverip 192.168.1.66 ath> tftpboot 0x84000000 openwrt.bin ath> bootm 5. Copy the OpenWrt sysupgrade image to the device using scp and install it like a normal upgrade (with no need to keeping config since no config from "previous OpenWRT installation" could be kept at all) # sysupgrade -n /path/to/openwrt/sysupgrade.bin Note: Like many other routers produced by Linksys, it has a dual firmware flash layout, but because I do not know how to handle it, I decide to disable it for more usable space. (That is why the "auto_recovery" above should be disabled before installing OpenWRT.) If someone is interested in generating factory firmware image capable to flash from stock firmware, as well as restoring the dual firmware layout, commented-out layout for the original secondary partitions left in the device tree may be a useful hint. Installation from Web Interface ------------ 1. Login to the router via its web interface (default password: admin) 2. Find the firmware update interface under "Connectivity/Basic" 3. Choose the OpenWrt factory image and click "Start" 4. If the router still boots into the stock firmware, it means that the OpenWrt factory image has been installed to the secondary partitions and failed to boot (since OpenWrt on EA4500 v3 does not support dual boot yet), and the router switched back to the stock firmware on the primary partitions. You have to install a stock firmware (e.g. 3.1.6.172023, downloadable from https://www.linksys.com/support-article?articleNum=148385 ) first (to the secondary partitions) , and after that, install OpenWrt factory image (to the primary partitions). After successful installation of OpenWrt, auto_recovery will be automatically disabled and router will only boot from the primary partitions. Signed-off-by: Edward Chow <equu@openmail.cc> (cherry picked from commit 50f727b7737d118f7d44986181e305af0624c41d)
* ath79: add support to TrendNet TEW-673GRUKorey Caro2022-11-114-4/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the TrendNet TEW-673GRU to ath79. This device was supported in 19.07.9 but was deprecated with ar71xx. This is mostly a copy of D-Link DIR-825 B1. Updates have been completed to enable factory.bin and sysupgrade.bin both. Code improvements to DTS file and makefile. Architecture | MIPS Vendor | Qualcomm Atheros bootloader | U-Boot System-On-Chip | AR7161 rev 2 (MIPS 24Kc V7.4) CPU/Speed | 24Kc V7.4 680 MHz Flash-Chip | Macronix MX25L6405D Flash size | 8192 KiB RAM Chip: | ProMOS V58C2256164SCI5 × 2 RAM size | 64 MiB Wireless | 2 x Atheros AR922X 2.4GHz/5.0GHz 802.11abgn Ethernet | RealTek RTL8366S Gigabit w/ port based vlan support USB | Yes 2 x 2.0 Initial Flashing Process: 1) Download 22.03 tew-673gru factory bin 2) Flash 22.03 using TrendNet GUI OpenWRT Upgrade Process 3) Download 22.03 tew-673gru sysupgrade.bin 4) Flash 22.03 using OpenWRT GUI Signed-off-by: Korey Caro <korey.caro@gmail.com> (cherry picked from commit 12cee869890853716ff1ee2dbd0a89c87a0ee544)
* qoriq: fix typo in FEATURESStijn Tintel2022-11-111-1/+1
| | | | | | | | There is no root-part FEATURE. Reported-by: Karl Palsson <karlp@etactica.com> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit dc51342d34c267d6dc8c69d72979cab394f49d4b)
* mac80211: fix mesh airtime link metric estimationFelix Fietkau2022-11-101-0/+36
| | | | | | | fix reading the per-packet rate on devices with firmware rate control Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 161b22d103decd82868e8e3c3fe09b88cf64724c)
* mac80211: fix issues with receiving small STP packetsFelix Fietkau2022-11-102-0/+124
| | | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit cec7dfa49775ce65270b977bea5fc0f928f97bdc) (cherry-picked from commit f6c359a65528b994e97235b5f0b0d02d6cdad918)
* mac80211: fix decap offload for stations on AP_VLAN interfacesFelix Fietkau2022-11-101-0/+37
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit eb07020de2b4a5f89579f09f5060d4b9f070a356)
* hostapd: remove invalid dtim_period option processingFelix Fietkau2022-11-101-2/+1
| | | | | | | | | dtim_period is a bss property, not a device one. It is already handled properly in mac80211.sh Fixes: 30c64825c7ed ("hostapd: add dtim_period, local_pwr_constraint, spectrum_mgmt_required") Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit ddf736e543d4a214f563dc008b6fb5ee5e0d1b66)
* ramips: backport TP-Link RE200 v3/v4 LED fixSungbo Eo2022-11-085-11/+54
| | | | | | | | | | | | | | This backports a commit which fixes LEDs vor the RE200 like this: Set power LED to gpio 43 instead of 44 for v3 and v4. Set red wifi LED to gpio 40 (was assigned to `red:wifi5g`). Tested by the author of the initial v3 and v4 commit. Tested-by: Richard Fröhning <misanthropos@gmx.de> Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit 02aa7a2bb9b6bdc8033d30c97f5b49534206a37c)
* strace: replace PKG_CPE_IDNick Hainke2022-11-071-1/+1
| | | | | | | | | | | Searching for strace in nvd.nist.gov/products/cpe/search [0] will result in "cpe:/a:strace_project:strace". Replace the current PKG_CPE_ID with it. [0] - https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.2&keyword=strace Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 55c015ae4d115cf8ffb61ee2778d8355c224bd46)
* strace: update to 5.19Nick Hainke2022-11-071-3/+3
| | | | | | | | Release Notes: https://strace.io/files/5.19/ Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 781a2e20085fff44fade871b0801468e4800af1a)
* strace: add nls.mkRosen Penev2022-11-071-1/+2
| | | | | | | | Needed when building with libdw and CONFIG_BUILD_NLS, mostly for the rpath-link. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 4dc198a74e63c18733be4c6962e19e68f094e688)
* strace: update to 5.18Nick Hainke2022-11-071-2/+2
| | | | | | | | | | | | | | | | Improvements - Added an interface of raising des Strausses awareness. - Added --tips option to print strace tips, tricks, and tweaks at the end of the tracing session. - Enhanced decoding of bpf and io_uring_register syscalls. - Implemented decoding of COUNTER_*, RTC_PARAM_GET, and RTC_PARAM_SET ioctl commands. - Updated lists of BPF_*, BR_*, BTRFS_*, IFA_*, IFLA_*, IORING_*, KEY_*, KVM_*, MADV_*, and UFFD_* constants. - Updated lists of ioctl commands from Linux 5.18. Bug fixes - Fixed printing of the updated value of union bpf_attr.next_id on the exiting of bpf(BPF_*_GET_NEXT_ID) calls. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 6d423ffbd17f5b00432f8f7a9fc7ea18d437d902)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 01:13:09 +0000