aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: backport MT7628 pinmux fixesMathias Kresin2017-11-225-3/+67
| | | | | | | | | | | | According to the datasheet the REFCLK pin is shared with GPIO#37 and the PERST pin is shared with GPIO#36. While at it fix a typo inside the pinmux setup code. The function is called refclk and not reclk. Update device tree source files accordingly. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix Planex CS-QR10 device packagesMathias Kresin2017-11-221-1/+3
| | | | | | | | | Add kmod-sound-core, it is a dependency of kmod-sound-mt7620 and will not be autoselected. Remove kmod-i2c-core, it will be autoselected by kmod-i2c-ralink. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix DCH-M225 supportMathias Kresin2017-11-222-2/+7
| | | | | | | | | | | | | | Setting the pins of the UARTF group to GPIO+I2S at the time the I2C driver loads is to late for the wps GPIO button. The gpio-keys driver fails to load since the pin used by the wps button is not yet set to GPIO. The wps button with the rfkill keycode is essential for this wireless only board. Add the missing sound and I2C kernel modules corresponding to the device nodes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* odhcpd: fix gcc7 build errorHans Dedecker2017-11-211-3/+3
| | | | | | 0573422 ndp: add switch/case fallthrough comments Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* hostapd: remove unused local var declarationLeon M. George2017-11-211-2/+0
| | | | Signed-off-by: Leon M. George <leon@georgemail.eu>
* hostapd: don't set htmode for wpa_supplicantLeon M. George2017-11-211-2/+0
| | | | | | no longer supported Signed-off-by: Leon M. George <leon@georgemail.eu>
* odhcpd: update to latest git HEAD (make dhcpv4 support optional)Hans Dedecker2017-11-201-12/+25
| | | | | | | | | fd80621 dhcpv4: make DHCPv4 support compiletime configurable cf29925 treewide: rework handling of netlink events 24cdc1b treewide: add netlink file 5dfb716 treewide: align function naming Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: fix a race condition that could lead to a use-after-free on a timerFelix Fietkau2017-11-201-0/+37
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix netlink family id for nl80211 messagesFelix Fietkau2017-11-201-0/+10
| | | | | | | Fixes responses for nl80211 calls Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix lzo and lz4 modulesJohn Crispin2017-11-201-2/+6
| | | | | | both of these have been split up and require additional ko files. Signed-off-by: John Crispin <john@phrozen.org>
* dnsmasq: load instance-specific conf-file if existsEmerson Pinter2017-11-192-8/+8
| | | | | | | Without this change, the instance-specific conf-file is being added to procd_add_jail_mount, but not used by dnsmasq. Signed-off-by: Emerson Pinter <dev@pinter.com.br>
* wolfssl: add PKG_CPE_ID ids to package and toolsAlexander Couzens2017-11-191-0/+1
| | | | | | | CPE ids helps to tracks CVE in packages. https://cpe.mitre.org/specification/ Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* openssl: Add optimization optionDaniel Engberg2017-11-182-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add option to optimize for speed instead of size cmd: openssl speed md5 sha1 sha256 sha512 des des-ede3 aes-128-cbc \ aes-192-cbc aes-256-cbc rsa2048 dsa2048 === Linksys WRT3200ACM === Default optimization: The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes md5 14111.49k 47147.75k 123375.02k 206937.09k 258828.97k sha1 14495.71k 46763.99k 116679.94k 188115.29k 228294.66k des cbc 22315.63k 23118.98k 23323.14k 23348.22k 23363.58k des ede3 8085.97k 8217.26k 8255.74k 8266.41k 8273.92k aes-128 cbc 48740.10k 52606.12k 54224.98k 56263.68k 54774.44k aes-192 cbc 43410.83k 47325.31k 48994.05k 49377.96k 48532.14k aes-256 cbc 39132.46k 42512.60k 43692.63k 43997.18k 44070.23k sha256 19987.80k 47314.69k 86119.08k 109352.28k 119466.67k sha512 8034.63k 32321.92k 47495.94k 65777.32k 74080.26k sign verify sign/s verify/s rsa 2048 bits 0.020387s 0.000528s 49.1 1892.2 sign verify sign/s verify/s dsa 2048 bits 0.005920s 0.006396s 168.9 156.3 Optimize for speed (-O3 instead of -Os and disable -DOPENSSL_SMALL_FOOTPRINT): The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes md5 14655.49k 48561.79k 126953.56k 210741.93k 262430.72k sha1 14607.90k 47032.15k 117725.87k 188226.22k 228499.46k des cbc 28041.11k 29586.84k 29939.80k 30047.91k 30067.37k des ede3 10697.93k 10899.75k 10956.97k 10972.84k 10980.01k aes-128 cbc 58852.70k 65956.07k 68675.67k 69388.29k 69607.42k aes-192 cbc 50299.73k 56501.23k 58491.65k 59008.00k 59159.89k aes-256 cbc 44684.38k 47944.36k 49098.67k 49573.89k 49463.30k sha256 19673.53k 47248.58k 86775.04k 110053.72k 119382.02k sha512 8029.67k 32033.02k 47440.04k 65740.12k 74072.06k sign verify sign/s verify/s rsa 2048 bits 0.019666s 0.000529s 50.8 1892.0 sign verify sign/s verify/s dsa 2048 bits 0.005882s 0.006450s 170.0 155.0 === D-Link DIR-860L (B1) === Default optimization: The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes md5 3376.97k 11654.74k 32966.76k 60016.27k 80729.43k sha1 2310.95k 6024.87k 11680.32k 15273.93k 16784.07k des cbc 6787.21k 7014.36k 7072.49k 7088.73k 7092.48k des ede3 2462.47k 2499.87k 2509.48k 2511.35k 2514.75k aes-128 cbc 10014.28k 11018.87k 11308.99k 11381.03k 11406.20k aes-192 cbc 8930.35k 9675.27k 9895.97k 9954.57k 9971.92k aes-256 cbc 8022.81k 8624.03k 8799.60k 8843.14k 8856.07k sha256 2546.33k 5542.19k 9326.99k 11249.03k 11969.57k sha512 877.22k 3503.44k 4856.01k 6554.96k 7299.32k sign verify sign/s verify/s rsa 2048 bits 0.109348s 0.003132s 9.1 319.3 sign verify sign/s verify/s dsa 2048 bits 0.032745s 0.037212s 30.5 26.9 Optimize for speed (-O3 instead of -Os and disable -DOPENSSL_SMALL_FOOTPRINT): The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes md5 3660.39k 12401.37k 34501.23k 62438.83k 81786.64k sha1 3500.20k 10730.70k 25056.19k 37715.86k 44253.13k des cbc 7189.75k 7545.88k 7641.90k 7665.71k 7672.18k des ede3 2690.64k 2734.33k 2745.24k 2748.13k 2748.81k aes-128 cbc 11325.29k 12731.75k 13151.34k 13259.95k 13289.55k aes-192 cbc 9932.36k 10997.65k 11309.84k 11389.53k 11408.92k aes-256 cbc 8845.13k 9677.01k 9920.30k 9980.77k 9996.42k sha256 3200.50k 7107.76k 12230.85k 14933.73k 15962.15k sha512 879.12k 3510.79k 4956.45k 6711.45k 7484.39k sign verify sign/s verify/s rsa 2048 bits 0.085641s 0.002365s 11.7 422.9 sign verify sign/s verify/s dsa 2048 bits 0.023881s 0.026120s 41.9 38.3 -O3 is considered safe for OpenSSL Ref: https://wiki.openssl.org/index.php/Compilation_and_Installation Tested hardware: Linksys WRT3200ACM / D-Link DIR-860L (B1) Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ixp4xx: Update to 4.9 kernel, refresh patches. Remove kmod-spi-gpio-old usage.Ted Hess2017-11-1843-2/+9768
| | | | Signed-off-by: Ted Hess <thess@kitschensync.net>
* netifd: update to latest git HEADHans Dedecker2017-11-171-3/+3
| | | | | | c92106e interface-ip: add missing IPv6 policy rule Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bcm53xx: use otrx for creating TRX imagesRafał Miłecki2017-11-171-6/+2
| | | | | | | | The advantage is that we don't have to specify max TRX size anymore and otrx doesn't allocate a buffer of that size. It saves us allocating 32 MiB for every image we generate. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: add otrx tool for handling TRX imagesRafał Miłecki2017-11-172-0/+593
| | | | | | | | | It can be a replacement for the trx tool. The advantage is that otrx doesn't alloc buffer for the whole TRX which can be a nice optimization when creating big images. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* otrx: fix memory leak in otrx_create_append_zerosRafał Miłecki2017-11-171-0/+3
| | | | | | A "free" call was missing after allocating a buffer. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* otrx: bump buffer size in otrx_create_append_fileRafał Miłecki2017-11-171-1/+1
| | | | | | | | Usually this function is called for appending some small files only (like fs marks) but let's just make it more generic and capable of handling bigger files easily. Increasing buffer to 1 KiB shouldn't hurt. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* otrx: drop unused otrx_create_parse_options functionRafał Miłecki2017-11-171-6/+0
| | | | | | | | It was there in case of adding some "create" command options that should be parsed before actually creating the output image. It seems we don't need any at this point so let's drop this function for now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Enable fadvise on older kernels.Rosen Penev2017-11-172-2/+2
| | | | | | Backport of 56342ee2bcbf9bf8918a01045471c7bb7faa1596 for older kernels. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* sunxi: add support for NanoPi M1 Plus boardLuis Araneda2017-11-173-0/+340
| | | | | | | | | | | | | | | | | | | | | | | | Backported devicetree from Kernel 4.13 with some additions to enable Ethernet and WiFi module The following features are working: - Ethernet - WiFi - eMMC and microSD slot - USB ports The following features are not working: * Bluetooth NanoPi M1 Plus key features - SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz - RAM: 1GB DDR3 - eMMC: 8GB - microSD slot - Ethernet 10/100/1000M - Wifi: AP6212 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* mac80211: enable brcmfmac's SDIO support on sunxi targetLuis Araneda2017-11-171-0/+1
| | | | | | Needed to support some SDIO connected cards, like AMPAK modules Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* sunxi: base files: add AP6212 (brcm43430) NVRAMLuis Araneda2017-11-171-0/+53
| | | | | | Used by the NanoPi M1 Plus board Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-sunxi: add NanoPi M1 Plus boardLuis Araneda2017-11-171-0/+7
| | | | Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ipq806x: ipq4019: enable usb phyRoman Yeryomin2017-11-171-1/+1
| | | | | | Run tested on ap-dk01.2-c1 Signed-off-by: Roman Yeryomin <roman@advem.lv>
* add PKG_CPE_ID ids to package and toolsAlexander Couzens2017-11-1749-0/+49
| | | | | | | | | | | CPE ids helps to tracks CVE in packages. https://cpe.mitre.org/specification/ Thanks to swalker for CPE to package mapping and keep tracking CVEs. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* kobs-ng: add header for integer definitionsSimon Wunderlich2017-11-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | My compilation failed because of missing uint.* definitions: In file included from mtd.h:33:0, from bootstream.c:35: BootControlBlocks.h:58:2: error: unknown type name 'uint8_t' uint8_t m_u8DataSetup; ^ BootControlBlocks.h:59:2: error: unknown type name 'uint8_t' uint8_t m_u8DataHold; ^ BootControlBlocks.h:60:2: error: unknown type name 'uint8_t' uint8_t m_u8AddressSetup; ^ BootControlBlocks.h:61:2: error: unknown type name 'uint8_t' uint8_t m_u8DSAMPLE_TIME; Adding the header file fixes the problem. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> [fold changes into 001-compile.patch] Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: pull edgeport firmware from linux-firmware repoBjørn Mork2017-11-161-8/+1
| | | | | | | | The kernel firmware/ is going away, so pull this firmware from the linux-firmware git repo instead. No actual changes to the installed files. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* linux-firmware: add IO Edgeport USB Serial firmwareBjørn Mork2017-11-161-0/+12
| | | | | | Preparing for kernel versions without firmware. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* brcm47xx: fix switch port mapping on D-Link DIR-330Antony Black2017-11-161-0/+1
| | | | | | | | D-Link DIR-330 is clone of ASUS WL500GP2, by default conf the WAN port is eth1, it's not working cus eth1 not soldered and wan port function performs 5th port of the switch. Signed-off-by: Antony Black <gtrtfm@gmail.com>
* wireguard: bump to 0.0.20171111Kevin Darbyshire-Bryant2017-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | edaad55 (tag: 0.0.20171111) version: bump snapshot 7a989b3 tools: allow for NULL keys everywhere 46f8cbc curve25519: reject deriving from NULL private keys 9b43542 tools: remove ioctl cruft f6cea8e allowedips: rename from routingtable 23f553e wg-quick: allow for tabs in keys ab9befb netlink: make sure we reserve space for NLMSG_DONE 73405c0 compat: 4.4.0 has strange ECN function 868be0c wg-quick: stat the correct enclosing folder of config file ceb11ba qemu: bump kernel version 0a8e173 receive: hoist fpu outside of receive loop bee188a qemu: more debugging f1fdd8d device: wait for all peers to be freed before destroying 2188248 qemu: check for memory leaks c77a34e netlink: plug memory leak 0ac8efd device: please lockdep a51e196 global: revert checkpatch.pl changes 65c49d7 Kconfig: remove trailing whitespace Compile-tested-for: ar71xx Run-tested-on: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mt76: update to the latest versionFelix Fietkau2017-11-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Significantly improves throughput on MT76x2, fixes some stability issues, adds LED support. Changes: 266ef38 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature 758376d mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature e764787 Fix errors found by cppcheck a6fce8a mt7603: add LED definition registers f658dd2 mt76x2: add LED register definitions f6a021d mt76x2: Support using PCI ID as chip ID c9bdcd8 mt76: add led support using mac80211 led framework 58e9138 mt76x2: init: add ma80211 led callbacks 8ea8da3 mt7603: init: add ma80211 led callbacks ded88cd mt76x2: Add PCI identifier for MT7602 51a6764 mt7603: remove unnecessary mcu register read function fbdbf65 debugfs: add support for changing the LED pin cc02e49 mac80211: move DT led configuration to the "led" child node e4e7734 mt76x2: limit client WCID entries to 0-127 60172cc mt76x2: clear drop flag for all WCIDs on init d8140b6 mt76x2: clear per-WCID tx rate lookup register 0ce7923 mt76x2: add helper function for setting drop mask ccc4baf mt76x2: clear drop mask when sending a PS response ff60d14 mt76: increase rx ring size for mt76x2 b57ada5 mt76x2: add rx statistics registers af425de mt76x2: fix LNA gain register annotation efd7724 mt76x2: sync channel gain value with latest reference driver 4af37bd mt76x2: implement dynamic AGC tuning based on false packet detection count 70f2002 mt76x2: add more gain tuning based on the latest reference driver 8f1c8ab mt76x2: sync tx power related values with reference driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: tweak TSQ settingsFelix Fietkau2017-11-162-1/+15
| | | | | | | | Latencies can be much higher on wifi devices, especially with aggregation. Tune the network stack setting introduced in the previous commit to account for that Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport a patch that allows drivers to tweak the TSQ logicFelix Fietkau2017-11-161-0/+85
| | | | | | | | | | | | | Currently local TCP performance on wifi devices can be limited because the TSQ (TCP Small Queues) code is tuned for wired ethernet latencies. With this patch drivers can increase the amount of local buffering to allow TCP to trigger larger aggregation sizes This commit is modified from the upstream version to allow #ifdef based backport feature detection Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to wireless-testing 2017-11-01Felix Fietkau2017-11-1630-1812/+720
| | | | | | | The wireless regdb is now loaded via firmware loading, CRDA support and built-in regdb support have been removed. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireless-regdb: add package containing the wireless regulatory databaseFelix Fietkau2017-11-163-0/+298
| | | | | | Installs to /lib/firmware for newer cfg80211 versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubus: update to the latest versionFelix Fietkau2017-11-161-3/+3
| | | | | | | | | | | 9c13096 ubus: Remove unnecessary memset calls. 6d1ea6c libubus: Fix deletion from context's object AVL tree when removing object e02813b ubusd: don't free messages in ubus_send_msg() anymore be146ad ubusd: rename goto label from `error` to `out` 27d712d ubusd_monitor: alloc & free the buffer outside of the loop 5f87f54 ubusd: move global retmsg per client Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libnl-tiny: use fixed message size instead of using the page sizeFelix Fietkau2017-11-161-6/+1
| | | | | | Simplifies the code and reduces size Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for ZBT WE3526Felix Fietkau2017-11-164-0/+130
| | | | | | | | | | | | | | | | | This is a variant of the ZBT WG3526 with a few minor modifications. The wifi chips are swapped, and there is no GPIO controllable status LED. There is also no SATA port. Specifications: - MT7621AT (880 MHz) - 512 MB RAM - 16 MB Flash (SPI NOR) - 5x 1Gbps Ethernet (built-in switch) - MT7612E 802.11ac 5 GHz WLAN - MT7603E 802.11n 2.4 GHz WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: extract board name from device tree as a fallbackFelix Fietkau2017-11-161-1/+3
| | | | | | | This makes it possible to avoid more duplication when adding support for a new board Signed-off-by: Felix Fietkau <nbd@nbd.name>
* otrx: always align image to 0x1000Rafał Miłecki2017-11-161-1/+7
| | | | | | | This seems to match what the original trx tool and mjn3's replacement do. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add packaging for mtdoopsJianhui Zhao2017-11-151-0/+14
| | | | Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
* cns3xxx: refresh kernel configKoen Vandeputte2017-11-151-6/+0
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* modules: Add kmod-ixgbevf kernel module for Intel(R) 10GbE Virtual Ethernet ↵Chris Blakely2017-11-151-0/+19
| | | | | | | | | | | support These adapters support SR-IOV. Thus the host can assign Virtual Functions (VFs) to different VMs by the PCI-E Passthrough (e.g. VFIO for KVM), to gain different advantages (performance, VF to VF communications, host kernel offload, etc.). Signed-off-by: Chris Blakely <cpblakely@gmail.com>
* packages: nvram: fix memory leak in _nvram_freeZhai Zhaoxuan2017-11-151-0/+4
| | | | | | | The value of nvram_tuple_t is allocated in _nvram_realloc, but it is not freed in _nvram_free. Signed-off-by: Zhai Zhaoxuan <zhaizhaoxuan@xiaomi.com>
* sysupgrade: don't kill our own parentMat Trudel2017-11-151-2/+3
| | | | | | | | Add the parent of the sysupgrade script to the list of pids not getting killed Signed-off-by: Mat Trudel <mat@geeky.net> Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: backport a kernel irq fix for setting IRQ affinityFelix Fietkau2017-11-151-0/+17
| | | | | | | | The IRQ controller can only set the affinity to a single CPU. Update the mask in the controller data. Suggested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: rework frequency/ht/vht selection for ibss/meshFelix Fietkau2017-11-159-179/+58
| | | | | | | | | | - Remove obsolete patch chunks regarding fixed_freq - Instead of patching in custom HT40+/- parameters, use the standard config syntax as much as possible. - Use fixed_freq for mesh - Fix issues with disabling obss scan when using fixed_freq on mesh Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: don't pass the hostapd ctrl iface in adhocAntonio Quartulli2017-11-151-2/+8
| | | | | | | Passing the ctrl iface to wpa_supplicant will automatically cause wpa_supplicant to send "STOP_AP" messages to the hostapd. This breaks the AP interfaces. Signed-off-by: Antonio Quartulli <ordex@autistici.org>