aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* mvebu: LS421DE: improve the HDD ledsDaniel González Cabanelas2020-11-161-2/+2
| | | | | | | Improve the HDD LEDs used for disk activity: - Use the trigger activity per ata channel Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* ramips: mt7621: fix Telco X1 GPIO switchesDENG Qingfang2020-11-161-1/+1
| | | | | | | The GPIO base of MT7621 GPIO 0~31 is 480 on kernel 5.4 Fix the GPIO numbering. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* odhcpd: update to latest git HEADHans Dedecker2020-11-151-4/+4
| | | | | | fb55e80 dhcpv6-ia : write statefile atomically Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dropbear: update to 2.81Hans Dedecker2020-11-154-9/+7
| | | | | | | | Update dropbear to latest stable 2.81; for the changes see https://matt.ucc.asn.au/dropbear/CHANGES Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bcm27xx: add bit variant to redundant RaspberryPiPaul Spooren2020-11-151-2/+14
| | | | | | | | | | Both bcm2709 and bcm2710 firmware can run on the same RaspberryPi models, varying however in 32 and 64 Bit architectures. The model name alone does not include the architecture information, which becomes problematic if looking at a overview that only contains the names. By adding a variant it is possible to tell the architecture. Signed-off-by: Paul Spooren <mail@aparcar.org>
* wireguard-tools: drop the dependency on ip-{tiny,full}Rui Salvaterra2020-11-141-1/+1
| | | | | | | | | | | | BusyBox ip already provides the required functionality and is enabled by default in OpenWrt. This patch drops the ip dependency and makes the BusyBox ip required dependencies explicit, allowing for a significant image size reduction. openwrt-ath79-generic-ubnt_nanostation-loco-m-squashfs-sysupgrade.bin size: 4588354 bytes (with ip-tiny) 4457282 bytes (with BusyBox ip) Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* build: support cmake verbose for host buildsFelix Fietkau2020-11-141-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libjson-c: enable rpath for host builds to fix errors on recent macOSFelix Fietkau2020-11-141-0/+5
| | | | | | Same approach as on libubox Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/bc: use autoreconf to fix build failure on macOS with recent Xcode ↵Felix Fietkau2020-11-142-1/+3
| | | | | | versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/libelf: use autoreconf to fix build failure on macOS with recent Xcode ↵Felix Fietkau2020-11-141-0/+4
| | | | | | versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: detect broken make version on macOSFelix Fietkau2020-11-141-0/+6
| | | | | | | | | Apple ships a broken make version with the Xcode command line tools. Homebrew installs make as gmake by default in order to not collide with Apple's version. Exit with an error if the broken one is used accidentally Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/fakeroot: fix build on macOS with recent Xcode versionsFelix Fietkau2020-11-141-1/+21
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: try to find getopt in macOS homebrew's standard locationFelix Fietkau2020-11-141-1/+2
| | | | | | It is not symlinked to /usr/local/bin by default Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iproute2: update to 5.9Hans Dedecker2020-11-143-6/+6
| | | | | | | | | Update iproute2 to latest stable 5.9; for the changes see https://lwn.net/Articles/834755/ Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Acked-by: Hauke Mehrtens <hauke@huake-m.de>
* ipq40xx: do not remove pci@40000000 for ap.dk04.1Adrian Schmutzler2020-11-131-6/+6
| | | | | | | | | | | | | | This pci@40000000 node from upstream was dropped when the device was converted from local DTS(I) files to kernel patches in [1] to ensure that change was purely cosmetic. However, the DK04.1 has a PCI-E slot by default, so let's keep (i.e. not remove) the kernel definition now. [1] c4beac9ea2e1 ("ipq40xx: use upstream DTS files for IPQ4019/AP-DK04.1") Suggested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: 5.4: update and reorder patchesRobert Marko2020-11-1333-432/+423
| | | | | | | | | | | | | | A lot of patches are outdated versions of upstreamed patches and drivers. So lets pull in the upstreamed patches and reorder remaining ones. This drops the unnecessary 721-dts-ipq4019-add-ethernet-essedma-node.patch which adds nodes for not yet in OpenWrt IPQESS driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> [do not touch 902-dts-ipq4019-ap-dk04.1.patch here] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: filter out more autogenerated kernel config optionsFelix Fietkau2020-11-133-7/+12
| | | | | | | Define wildcard patterns for filtering in target/linux/generic/config-filter Preparation for supporting newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/kconfig.pl: allow regex syntax in filtering out config entriesFelix Fietkau2020-11-131-2/+9
| | | | | | | This will be used to filter out some autogenerated config values from the kernel config files Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: rename mtdpart_get_master to mtd_get_masterFelix Fietkau2020-11-132-4/+4
| | | | | | Preparation for supporting newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: pass KBUILD_EXTRA_SYMBOLS with symvers files for kernel module packagesFelix Fietkau2020-11-132-10/+3
| | | | | | | This replaces the previous (deprecated) method of collecting symvers data in $(PKG_BUILD_DIR)/Module.symvers, which does not work on newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: ip17xx: use pr_warn instead of pr_warningFelix Fietkau2020-11-131-3/+3
| | | | | | Fixes build with newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove kmod-capiFelix Fietkau2020-11-131-20/+0
| | | | | | We don't package any driver that uses this module Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2020-11-131-3/+3
| | | | | | 4a41135750d9 system-linux: only overwrite dev->present state on check_state for simple devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: platform/mikrotik: implement multi caldataThibaut VARÈNE2020-11-121-33/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MikroTik recently changed again the way they store wlan calibration data on devices. Prior to this change, ERD calibration data for all available radios was stored within a single identifier node ("tag" in RouterBoot parlance). Recent devices have been seen with calibration (and BDF) data stored in separate identifiers within LZOR packing for each radio: this patch addresses this by: 1) ensuring that both variants are properly supported, 2) preserving backward compatibility with existing data consumers, 3) allowing for more than 2 calibration blobs to be exposed via sysfs. Specifically, before this patch, the driver would provide a single sysfs file named /sys/firmware/mikrotik/hard_config/wlan_data that contained whatever calibration data found on the device's flash. After this patch, when executed on a device that uses the old style storage, this behavior is unchanged, but when executed on a device that uses new style storage (for either traditional "ERD" packing or "LZOR" packing), the driver replaces that single file with a folder containing one or more files each containing the data encoded within individual identifiers. As far as OpenWRT is concerned, this means that for devices which are known to exist with both styles of data storage, a suitable hotplug stub could look like this for e.g. the second radio: wdata="/sys/firmware/mikrotik/hard_config/wlan_data" ( [ -f "$wdata" ] && caldata_sysfsload_from_file "$wdata" 0x8000 0x2f20 ) || \ ( [ -d "$wdata" ] && caldata_sysfsload_from_file "$wdata/data_2" 0x0 0x2f20 ) This patch has been tested with LZOR old and new style packing on ipq4019, and with old style on ath79. Tested-by: John Thomson <git@johnthomson.fastmail.com.au> Tested-by: Шебанов Алексей <admin@ublaze.ru> Tested-by: Alen Opačić <subixonfire@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Tested-by: Robert Marko <robimarko@gmail.com>
* libnetfilter-log: Backport kernel header syncsBrett Mastbergen2020-11-123-1/+161
| | | | | | | | | | | | Backport upstream commits that sync the local kernel header copies in this library, with up to date copies. These updated headers ensure that libnetfilter-log users can use current kernel functionality such as requesting that conntrack information be appended to nflog events sent to userspace via the NFULNL_CFG_F_CONNTRACK flag. This functionality has been available since kernel version 4.4 Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* scripts: add spelling.txt for checkpatch.plPaul Spooren2020-11-121-0/+1517
| | | | | | | | | | | | | | | | | | | | | | Running the updated checkpatch version with spelling.txt show that spelling mistakes happen to everyone. > /target/linux$ fd .*.patch | xargs ../../scripts/checkpatch.pl | rg spell WARNING: 'usefull' may be misspelled - perhaps 'useful'? WARNING: 'afecting' may be misspelled - perhaps 'affecting'? WARNING: 'usefull' may be misspelled - perhaps 'useful'? WARNING: 'afecting' may be misspelled - perhaps 'affecting'? WARNING: 'begining' may be misspelled - perhaps 'beginning'? WARNING: 'superflous' may be misspelled - perhaps 'superfluous'? WARNING: 'multipe' may be misspelled - perhaps 'multiple'? WARNING: 'recieves' may be misspelled - perhaps 'receives'? WARNING: 'retreive' may be misspelled - perhaps 'retrieve'? WARNING: 'tranfer' may be misspelled - perhaps 'transfer'? WARNING: 'additonal' may be misspelled - perhaps 'additional'? WARNING: 'accomodate' may be misspelled - perhaps 'accommodate'? [...] Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: checkpatch remove device-tree doc checkPaul Spooren2020-11-121-47/+0
| | | | | | | Remove checks for device tree documentation as the OpenWrt tree comes withouth the ./Documentation folder. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: Update checkpatch.pl to 2020-06-11Paul Spooren2020-11-121-567/+3995
| | | | | | | | Checkpatch grown in functionallity and we should make use of that. If OpenWrt patches should be upstream material they should also be checked based on upstream checkpatch.pl instead of 2013. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: generic: disable CONFIG_EFI_VARS Alberto Bursi2020-11-121-1/+1
| | | | | | | | | | | | | | | | | | | CONFIG_EFI_VARS has been disabled in 64bit x86 target in 2018 by the following commit b0a51dab8c5b8d40828a00b0c6d66450bf90f217 the same reasons apply to Generic target, so now it's disabled here too. Leaving it enabled is also blocking compile as a new symbol was added EFI_CUSTOM_SSDT_OVERLAYS that depends from CONFIG_EFI_VARS and the build system stops and waits for user input on what to do about it. The Legacy and Geode targets never had any EFI_xxx configs enabled so they don't have this issue Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
* rtl838x: Add switch and ethernet driver support for RTL839x SoCsBirger Koblitz2020-11-1211-457/+1218
| | | | | | | | This adds support for RTL839x SoCs in the ethernet and switch drivers of the rtl838x architecture. Reviewed-by: Andreas Oberritter <obi@saftware.de> Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* sunxi: add support for Libre Computer ALL-H3-CC H5Roman Kuzmitskii2020-11-122-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz - DDR3 RAM: 2GB - Network: 10/100M Ethernet x 1 - IR: x1 (Receive) - USB (Host) Type-A x3 - USB (OTG) Type-A x1 - MicroSD Slot x 1 - eMMC Slot x1 - MicroUSB power input - GPIO 40pin header - UART 3pin header - Leds: - librecomputer:blue:status - librecomputer:green:pwr - Buttons: - uboot button (used to enter fel mode) - power button (can trigger power on) - Power Supply via MicroUSB or GPIO 5V/2A Installation: - Write the image to SD Card with dd - Boot from the SD Card Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com> [Fixed Signed-off-by] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: add module support Solarflare network adapterTan Zien2020-11-121-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Solarflare user guide it is recommended to install lm-sensors and use the following command to obtain adapter health info $ sensors | grep sfc sfc pci 0400 sfc pci 0401 $ sensors sfc pci 0400 sfc pci 0400 Adapter: PCI adapter 1.2V supply: N/A 3.3V supply: +3.22 V (min = +3.00 V, max = +3.60 V) 12.0V supply: +12.14 V (min = +11.04 V, max = +12.96 V) 0.9V supply (ext. ADC): +1.03 V (min = +0.50 V, max = +1.10 V) (crit max = +1.15 V) 0.9V phase A supply: N/A PHY overcurrent: N/A ERROR: Can't get value of subfeature temp1_alarm: Can't read PHY temp.: N/A AOE FPGA temp.: +68.0°C (low = +0.0°C, high = +95.0°C) (crit = +105.0°C) Ambient temp.: +56.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) Controller die (TDIODE) temp.: +77.0°C (low = +0.0°C, high = +95.0°C) (crit = +105.0°C) Board front temp.: +59.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) Board back temp.: +62.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) 1.2V supply current: N/A 0.9V phase A supply current: N/A 3.3V supply current: N/A 12V supply current: N/A Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* netfilter: Add queue support for nftablesBrett Mastbergen2020-11-122-0/+13
| | | | | | | | | This change adds the configuration option to build and include the nft_queue kernel module, which allows traffic to be queued up to userspace from an nftables rule Tested-by: Sébastien Delafond sdelafond@gmail.com Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* firmware-utils: fix mistake and improve logic in nec-encINAGAKI Hiroshi2020-11-122-5/+5
| | | | | | | | | this patch fixes/improves follows: - PATTERN_LEN is defined as a macro but unused - redundant logic in count-up for "ptn" Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* build: store SOURCE_DATE_EPOCH in JSON info filesPaul Spooren2020-11-122-0/+2
| | | | | | | | The source date epoch is the only reproducible date close to the actual build date. It can be used for tooling like the firmware wizard to show the image age. Signed-off-by: Paul Spooren <mail@aparcar.org>
* rpcd: remove file when appliedHuangbin Zhan2020-11-122-5/+7
| | | | | | Make sure exit value of this script is zero. Or the file won't be deleted. Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* ca-certificates: canonical the build dirJianhui Zhao2020-11-121-1/+7
| | | | | | | The previous build directory "build_dir/target-xx/work/" contaminated the entire build directory. Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
* busybox: Let procd respawn cronBruno Randolf2020-11-122-1/+2
| | | | | | | On some systems I see the issue that crond dies after a few days. Simply letting procd respawn the process is a simple safety-net. Signed-off-by: Bruno Randolf <br1@einfach.org>
* glibc: update to latest 2.32 commit (BZ #25399)Hans Dedecker2020-11-121-2/+2
| | | | | | | | | | | | 5c36293f06 resolv: Serialize processing in resolv/tst-resolv-txnid-collision 2dfa659a66 resolv: Handle transaction ID collisions in parallel queries (bug 26600) 05c025abca support: Provide a way to clear the RA bit in DNS server responses f688bcd83d support: Provide a way to reorder responses within the DNS test server eba0ce6058 Remove __warndecl 5337b2af4b Remove __warn_memset_zero_len [BZ #25399] c6e794640c aarch64: Add unwind information to _start (bug 26853) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-envtools: support Xiaomi Mi Router 3G v2/4A GigabitAntonis Kanouras2020-11-122-1/+3
| | | | | | | | | | | | Add support for the following devices: - Xiaomi Mi Wi-Fi Router 3G v2 - Xiaomi Mi Router 4A Gigabit Edition Signed-off-by: Antonis Kanouras <antonis@metadosis.eu> [add explicit case for 4A, bump PKG_RELEASE, improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add Xiaomi Mi Router 4A Gigabit explicitlyAdrian Schmutzler2020-11-125-160/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device has previously been supported by the image for Xiaomi Mi Router 3G v2. Since this is not obvious, the 4A is marketed as a new major revision and it also seems to have a different bootloader, this will be both more tidy and more helpful for the users. Apart from that, note that there also is a 100M version of the device that uses mt7628 platform, so a specifically named image will also prevent confusion in this area. Specifications: - SoC: MediaTek MT7621 - Flash: 16 MiB NOR SPI - RAM: 128 MiB DDR3 - Ethernet: 3x 10/100/1000 Mbps (switched, 2xLAN + WAN) - WIFI0: MT7603E 2.4GHz 802.11b/g/n - WIFI1: MT7612E 5GHz 802.11ac - Antennas: 4x external (2 per radio), non-detachable - LEDs: Programmable "power" LED (two-coloured, yellow/blue) Non-programmable "internet" LED (shows WAN activity) - Buttons: Reset Installation: Bootloader won't accept any serial input unless "boot_wait" u-boot environment variable is changed to "on". Vendor firmware won't accept any serial input until "uart_en" is set to "1". Using the https://github.com/acecilia/OpenWRTInvasion exploit you can gain access to shell to enable these options: To enable uart keyboard actions - 'nvram set uart_en=1' To make uboot delay boot work - 'nvram set boot_wait=on' Set boot delay to 5 - 'nvram set bootdelay=5' Then run 'nvram commit' to make the changes permanent. Once in the shell (following the OpenWRTInvasion instructions) you can then run the following to flash OpenWrt and then reboot: 'cd /tmp; curl https://downloads.openwrt.org/...-sysupgrade.bin --output firmware.bin; mtd -e OS1 -r write firmware.bin OS1' Suggested-by: David Bentham <db260179@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: make restool depend on TARGET_layerscape_armv8_64bYangbo Lu2020-11-121-2/+2
| | | | | | | The restool is for Layerscape DPAA2 platforms which are ARMv8 platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ath79: add support for Qxwlan E600G v2 / E600GAC v2张鹏2020-11-129-0/+332
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | E600G v2 based on Qualcomm/Atheros QCA9531 Specification: - 650/600/200 MHz (CPU/DDR/AHB) - 128/64 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz - 2 x 10/100 Mbps Ethernet(RJ45) - 1 x MiniPCI-e - 1 x SIM (3G/4G) - 5 x LED , 1 x Button(SW2-Reset Buttun), 1 x power input - UART(J100) header on PCB(115200 8N1) E600GAC v2 based on Qualcomm/Atheros QCA9531 + QCA9887 Specification: - 650/600/200 MHz (CPU/DDR/AHB) - 128/64 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz - 1T1R 5 GHz - 2 x 10/100 Mbps Ethernet(RJ45) - 6 x LED (one three-color led), 2 x Button(SW2-Reset Buttun),1 x power input - UART (J100)header on PCB(115200 8N1) Flash instruction: 1.Using tftp mode with UART connection and original OpenWrt image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ath79-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to OpenWrt: run lfw - After that the device will reboot and boot to OpenWrt. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original OpenWrt image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ath79-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to OpenWrt. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 <sd20@qxwlan.com> [rearrange in generic.mk, fix one case in 04_led_migration, update commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* sunxi: fix board.d/01_leds permissions and drop includePiotr Jurkiewicz2020-11-121-1/+0
| | | | | | | | | | | The file lacks executable permissions, which makes it not being applied during the first boot. While at it, drop unneeded include. Signed-off-by: Piotr Jurkiewicz <piotr.jerzy.jurkiewicz@gmail.com> [do not touch board name handling, update commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* wireguard: bump to 1.0.20201112Jason A. Donenfeld2020-11-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | * noise: take lock when removing handshake entry from table This is a defense in depth patch backported from upstream to account for any future issues with list node lifecycles. * netns: check that route_me_harder packets use the right sk A test for an issue that goes back to before Linux's git history began. I've fixed this upstream, but it doesn't look possible to put it into the compat layer, as it's a core networking problem. But we still test for it in the netns test and warn on broken kernels. * qemu: drop build support for rhel 8.2 We now test 8.3+. * compat: SYM_FUNC_{START,END} were backported to 5.4 * qemu: bump default testing version The real motivation for this version bump: 5.4.76 made a change that broke our compat layer. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* libnl-tiny: update to the latest versionFelix Fietkau2020-11-121-3/+4
| | | | | | | 2584ebc642b2 libnl-tiny: install pkgconfig file c291088f631d unl: add support for connecting to rtnl Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add minstrel fixes that fix mt76 issues in legacy modeFelix Fietkau2020-11-122-0/+122
| | | | | | | | Remove deferred sampling code which does not work well with rate tables + probing. Fix tx status handling if the first invalid rate idx is not set to -1 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport the new tasklet APIFelix Fietkau2020-11-121-0/+35
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2020-11-121-3/+3
| | | | | | | | | | | | | 3023b0cc7352 bridge: add support for defining port member vlans via hotplug ops a3016c451248 vlan: add pass-through hotplug ops that pass the VLAN info to the bridge d59f3ddcbaf0 vlandev: add pass-through hotplug ops that pass the VLAN info to the bridge dd5e61153636 bridge: show vlans in device status a56e14afa612 bridge: preserve hotplug ports on vlan update if config is unchanged d1e8884f8911 bridge: fix use-after-free bug on bridge member free 3a2b21001c3c system-dummy: set present state only for simple devices ed11f0c0ffe4 bridge: only overwrite implicit vlan assignment if vlans are configured Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: 'ipset' config sectionsAleksandr Mezin2020-11-112-1/+28
| | | | | | | | | | | | | | | | | | | | | | | Allow configuring ipsets with dedicated config sections: config ipset list name 'ss_rules_dst_forward' list name 'ss_rules6_dst_forward' list domain 't.me' list domain 'telegram.org' instead of current, rather inconvenient syntax: config dnsmasq ... list ipset '/t.me/telegram.org/ss_rules_dst_forward,ss_rules6_dst_forward' Current syntax will still continue to work though. With this change, a LuCI GUI for DNS ipsets should be easy to implement. Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 18:14:56 +0000