aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x: update DT in accordance to new drivers And add some more DT nodesPavel Kubelun2016-11-037-214/+90
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: switch to generic cpufreq driver cpufreq-dtPavel Kubelun2016-11-035-466/+383
| | | | | | | | This fixes ondemand frequency scaling and moves ipq806x onto upstream driver Also switching to ondemand frequency scaling as it is fixed now Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: add opp patches for voltage scalingPavel Kubelun2016-11-032-0/+259
| | | | | | Preparing for cpufreq driver switch to generic cpufreq-dt Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: update clk-qcom patchesPavel Kubelun2016-11-035-6/+563
| | | | | | Preparing for cpufreq driver switch to generic cpufreq-dt Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix leds, sata port for Netgear R7800 and minor fixes - renamed ↵Pavel Kubelun2016-11-032-34/+43
| | | | | | leds in correct color accordance - blink power led with white during boot and with amber when flashing firmware - fixed usb leds - enabled unused wps and rfkill leds as wlan leds. Now rfkill led is for 2.4GHz and wps - 5GHz WIFI - removed unneeded bootargs - removed unneeded pci pins from R7800 DT (driver already handles it in proper way) and add tx offsetting - nand ecc step size - fixed sata ports Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ramips: Use MT7621 I2C driver for MT7628/MT7688Sven Schwermer2016-11-031-2/+4
| | | | | | | The i2c-ramips driver does not work for the MT7628/MT7688 SoCs, the i2c-mt7621 driver does. Signed-off-by: Sven Schwermer <sven.schwermer@arcor.de>
* uboot-envtools: move to Boot Loaders submenuAlberto Bursi2016-11-031-0/+1
| | | | | | Boot Loaders submenu is where other bootloader tools (fconfig and grub2-editenv) are. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ipq806x: TP-Link Archer C2600: convert old usbdev trigger to new usbportCezary Jackiewicz2016-11-031-2/+2
| | | | Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ramips: add support for MikroTik hEX v3 (RB750Gr3)Andrew Yong2016-11-026-0/+137
| | | | | | | | | | | | | | The MikroTik hEX v3 (RB750Gr3) is a MT7621AT board which is similar to most MT7621 reference designs, it can be easily supported by this patch; however, the stock RouterBOOT bootloader has to be replaced by a MT7621 SDK U-Boot such as https://github.com/ndoo/RB750Gr3-U-Boot - U-Boot configured for the RB750Gr3 (16MiB SPI flash, 256MiB DDR3 RAM at 1200MHz). RouterBOOT, the stock bootloader, does not initialize the UART and boots silently, making it preferable to replace it with a MT7621 SDK U-Boot with UART (57600 8N1) that supports HTTP, TFTP or serial upload of sysupgrade firmware and U-Boot. Furthermore, RouterOS, the stock firmware, is contained in a proprietary modification of SquashFS without GPL sources; UART is also disabled in stock firmware. The combination of LEDE firmware generated by this PR and MT7621 SDK U-Boot expects the printed MAC address to reside at offset `0xe000` of the factory partition (absolute offset is `0x4e000`); this is similar to the factory MAC address offset for several other MT7621 devices. A 16MiB flash dump suitable for use with flashrom will be provided if/once this patch is accepted and binaries are built by LEDE buildbot. Alternatively, writing the U-Boot to the SPI flash starting at 0x0 offset and booting the board with serial console attached will allow TFTP, HTTP or serial upload of sysupgrade firmware. Signed-off-by: Andrew Yong <me@ndoo.sg>
* dnsmasq: support log-dhcp optionKarl Palsson2016-11-021-0/+1
| | | | | | Helpful when trying to resolve issues with quirky dhcp client devices. Signed-off-by: Karl Palsson <karlp@etactica.com>
* kernel: update kernel 4.4 to version 4.4.30Stijn Segers2016-11-0232-73/+72
| | | | | | | | | | This patch bumps the 4.4 kernel from .28 to .30 and refreshes the patches. Compile-tested on ar71xx, x86/64, ramips/mt7621, brcm47xx and kirkwood. Run-tested on ar71xx & ramips/mt7621, brcm47xx and kirkwood (last two confirmed by P. Wassi). Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* ramips: add usb packages into DIR-860L B1 profileStijn Segers2016-11-021-0/+1
| | | | | | | This patch adds the kmod-usb3 and kmod-usb-ledtrig-usbport packages to the DIR-860L B1 profile. The DIR-860L B1 has a USB 3 port. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* iproute2: rename ip to ip-tiny and let both ip-tiny and ip-full provide "ip"Jo-Philipp Wich2016-11-021-6/+7
| | | | | | | | | | | | | | | | | | Rename the "ip" package declaration to "ip-tiny" and let both "ip-tiny" and "ip-full" provide the virtual "ip" package. This allows users to freely choose the "ip" command variant while other packages can continue to depend on "ip" without needing to enforce a specific variant. Note that this commit does not add busybox as "ip" provider due to the following reasons: - The builtin Busybox ip applet cannot be added or removed at runtime - Both "ip-tiny" and "ip-full" are able to install without file clashes even if the busybox applet is enabled - The system is preferring full "ip-tiny" and "ip-full" at runtime, even if Busybox ip is still present. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)Jo-Philipp Wich2016-11-0220-277/+58
| | | | | | | | | | | | | | | | | | The current uboot default config for the A13 SOM erroneously enables support for the AXP209 power regulator IC which is not present on the board. This superfluous support module sets an incorrect initial clock frequency and confuses the kernel, ultimately leading to a boot failure later on. Properly disable the PMIC support and enable the EHCI support by translating the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and USB_EHCI_HCD symbols respectively. Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and refresh the remaining patches of the series while we're at it. Reported-by: Mario Fischer <mario-fischer@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/package-metadata.pl: honour DEFAULT_VARIANTJo-Philipp Wich2016-11-021-2/+15
| | | | | | | | | | | | So far, package-metadata.pl always considered the first provider of a virtual package to be the default variant which might deviate from what buildroot considers to be the default. Change the Kconfig dependency / select code generation for virtual package providers to consider the DEFAULT_VARIANT to be the primary provider and only fall back to the first provider if no default variant was explicitely tagged. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: uci-defaults: support requesting untagged switch port configurationJo-Philipp Wich2016-11-021-8/+14
| | | | | | | | | | | | | Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let board.d network files request default network switch configurations which do not use tagged CPU ports. This commit itself has no effect on generated configurations at the moment since we still emit untagged configurations by default but it allows boards to opt-out from default tagged configs in case we start emitting tagged settings by default. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* include: properly update .install stamp filesJo-Philipp Wich2016-11-021-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now the $(PKG_INSTALL_STAMP) files are only written if a package is selected as <*> but never deleted or emptied if the corresponding package is getting deselected. For ordinary packages this usually is no problem as the package/install recipe performs its own check for enabled packages when assembling the list of install stamp files to consider, but this logic might fail under certain circumstances for packages providing multiple build variants. In case of a multi-variant package, the buildroot first checks if any of the variants is enabled, then resolves all variants of the common source package and finally processes the corresponding .install stamp files of all variants, relying on the assumption that only the selected .install stamp file exists. When an initially selected variant is getting deselected or changed from <*> to <m> and another variant is marked as <*> instead, the .install stamp file of the deselected variant remains unchanged and a second .install stamp file for the newly selected variant is getting created, causing the package/install recipe to pick up two .install stamps with conflicting variants, leading to opkg file clashes. This issue happens for example if package "ip" is set to <m> and package "ip-full" to <*> - the install command will eventually fail with: * check_conflicts_for: The following packages conflict with ip: * check_conflicts_for: ip-full * * opkg_install_cmd: Cannot install package ip. In order to fix the problem, always process the removal requests or the .install stamp files, even for deselected packages but only write the package base name into the stamp file if the corresponding package is marked as builtin. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/package-metadata.pl: fix handling of virtual (PROVIDES) dependsJo-Philipp Wich2016-11-021-2/+2
| | | | | | | | | | | | Currently the code emitting dependencies for provide candidates is overwriting the specification calculated by the previous conditional dependency handling code, rendering dependencies on virtual PROVIDES packages in conjunction with conditional dependencies unusable. Instead of overwriting, append the PROVIDES dependency spec in order to fix using DEPENDS on virtual provider packages in conjunction with conditions. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* include/host-build.mk: use STAGING_DIR_HOSTPKGJo-Philipp Wich2016-11-011-1/+1
| | | | | | | Instead of hardcoding $(STAGING_DIR)/host, use the new $(STAGING_DIR_HOSTPKG) variable to refer to the directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* rules.mk: add STAGING_DIR_HOSTPKG variableJo-Philipp Wich2016-11-011-0/+1
| | | | | | | Add a STAGING_DIR_HOSTPKG variable which refers to $(STAGING_DIR)/host in order to prepare support for relocating that directory in the future. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: add build-depends on util-linuxJo-Philipp Wich2016-11-011-0/+1
| | | | | | | The libblkid probe support in fstools git head requires blkid/blkid.h for compilation, so add a build dependency on util-linux which provides libblkid. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: Add support to Powerline ac TP-Link WPA8630Henryk Heisig2016-10-3112-2/+210
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* layerscape: add 64b/32b target for ls1012ardb deviceYutang Jiang2016-10-31149-6/+37908
| | | | | | | | | | | | | | | | | | | | | | | | The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: add 64b/32b target for ls1043ardb deviceYutang Jiang2016-10-3186-0/+171202
| | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* ramips: Archer C50 cleanupHenryk Heisig2016-10-313-24/+54
| | | | | | | | | | | - setting read-only flag to important partitions - enabling PA to improve 2.4 GHz signal strength - add missing leds - rename colour led - add mac adress to 5GHz wlan interface - included <dt-bindings/input/input.h> and <dt-bindings/gpio/gpio.h> Signed-off-by: Henryk Heisig hyniu@o2.pl
* lantiq: add vpe/watchdog modules to kernelStefan Koch2016-10-311-0/+6
| | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit 064f467264c5c9b6eca0bb96b587f9412b770cc5) Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: added xrx200 as plattform for ltqvmmcStefan Koch2016-10-311-1/+1
| | | | Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: added xrx200 as plattform for ltqtapiStefan Koch2016-10-311-1/+1
| | | | Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: vpe softdogStefan Koch2016-10-311-0/+171
| | | | | | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit eb0ce57270d0b5b81b224b9336cf54707497eede) Modified after cherry-pick: obj in Makefile Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: added support for VPE1Stefan Koch2016-10-311-0/+208
| | | | | | | | | | | | | | | | | | Created minimal patchset based on BB rev 43158 by Eddi De Pieri 14.07/openwrt.git 79472c025449efae9310defad0d3a73cff14d756 If the VR9 based router provides FXS ports and they shoud enabled then the following must added to the kernel command line: mem=[TOTALMEMSIZE-2M] vpe1_load_addr=ADDRESS vpe1_mem=2M maxvpes=1 maxtcs=1 To use FXS 2M of RAM are needed for the VPE firmware. The size is set by vpe1_mem. The available RAM must be reduced by this size using the mem argument. A correct load address (example 0x83e00000) for the firmware must be given, too. Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: modify vr9.dts to support vmmcStefan Koch2016-10-311-0/+8
| | | | | | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit 8d924d43c0ea6839a3a33e54982e8da48b736001) Modified after cherry-pick: compatible attribute Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: fix vmmc buildStefan Koch2016-10-312-5/+18
| | | | | | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit 47b1ff965b0cb57013b40fbe2bcd7f3c6eb6b606) Modified after cherry-pick: FW_MD5SUM in Makefile Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: ltq-vmmc add support for ar9-vr9Stefan Koch2016-10-311-0/+247
| | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit ea9e61b8eb61a2e362a50541f03466dc7d087947) Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* ipq806x: add reserved memory node in Netgear R7800Pavel Kubelun2016-10-311-0/+5
| | | | | | KERNEL BUG: BAD_PAGE_STATE in process appears here and there during intensive memory usage. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ramips: Add RTC driver to kernel for working hctosysRosen Penev2016-10-312-2/+3
| | | | | | | Build the RTC driver into the kernel, (and remove the optional module), in order to make hctosys working. (Currently the module is loaded after hctosys has failed previously) Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq806x: ArcherC2600: export usb power pinsHenryk Heisig2016-10-311-0/+16
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ipq806x: ArcherC2600: devictree cleanupHenryk Heisig2016-10-311-13/+44
| | | | | | add blank lines and use macros for GPIOs Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* fstools: update to latest git HEADJohn Crispin2016-10-311-3/+3
| | | | | | adds f2fs support Signed-off-by: John Crispin <john@phrozen.org>
* kernel: update kernel 4.4 to version 4.4.28Paul Wassi2016-10-318-19/+19
| | | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on ar71xx, brcm47xx, kirkwood. Signed-off-by: Paul Wassi <p.wassi@gmx.at> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* base-files: sysfixtime: Keep RTC time in UTC timezonePetr Štetiar2016-10-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to tell hwclock with -u commandline option, that we would like to keep our RTC clock in UTC timezone. Linux kernel expects RTC in UTC timezone anyway. In current state of things, we don't tell hwclock to load/store time from/to RTC in UTC timezone so it uses the timezone from the system time. If it's set to different timezone then UTC, sysfixtime is going to screw the time in RTC. I've following in the setup script: uci set system.@system[0].timezone='CET-1CEST,M3.5.0,M10.5.0/3' uci set system.@system[0].zonename='Europe/Prague' I've this RTC setup (rtc1 is RTC on i.MX6 SoC, rtc0 is battery backed RTC mcp7941x): rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0 snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 Then we can experience following (current time is 10:15am): $ date Fri Oct 21 10:15:07 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 08:14:46 2016 0.000000 seconds $ hwclock -u -r -f /dev/rtc0 Fri Oct 21 10:14:46 2016 0.000000 seconds And after current broken sysfixtime: $ /etc/init.d/sysfixtime stop $ date Fri Oct 21 10:15:25 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 10:15:31 2016 0.000000 seconds Now we've time in our battery backed RTC in CEST timezone instead of UTC. Then once again, but with this patch applied to sysfixtime, where hwclock is using correctly the -u parameter: $ /etc/init.d/sysfixtime stop $ date Fri Oct 21 10:15:53 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 08:15:55 2016 0.000000 seconds Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Jo-Philipp Wich <jo@mein.io>
* kernel: deactivate CONFIG_QCOM_SPMI_TEMP_ALARMHauke Mehrtens2016-10-311-0/+1
| | | | | | This fixes the build of the ipq806x target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: properly package wpa-supplicant-meshAlexis Green2016-10-311-1/+2
| | | | | | | | | Ensure that selecting the wpa-supplicant-mesh package actually packages the wpa_supplicant binary with SAE support and add missing dependency on OpenSSL. Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: slightly reword commit message for clarity] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd support for VLANs through a file in addition to Radius.Petr Konecny2016-10-311-18/+25
| | | | Signed-off-by: Petr Konecny <pekon@google.com>
* uhttpd: Add Basic Auth configDaniel Dickinson2016-10-312-1/+38
| | | | | | | | | | | | | | | | | We add an 'httpauth' section type that contains the options: prefix: What virtual or real URL is being protected username: The username for the Basic Auth dialogue password: Hashed (crypt()) or plaintext password for the Basic Auth dialogue httpauth section names are given included as list items to the instances to which they are to be applied. Further any existing httpd.conf file (really whatever is configured in the instance, but default of /etc/httpd.conf) is appended to the per-instance httpd.conf Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
* musl: fix parsing of quoted time zone namesHannu Nyman2016-10-311-0/+11
| | | | | | | | | | | | | | | fix parsing of the < > quoted time zone names. Compare the correct character instead of repeatedly comparing the first character. Patch has been submitted to upstream as http://www.openwall.com/lists/musl/2016/10/24/3 Longer explanation in http://www.openwall.com/lists/musl/2016/10/19/1 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> [Jo-Philipp Wich: move references into commit message, shorten title prefix] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: Add net config for MR12 & MR16Chris Blake2016-10-311-0/+2
| | | | | | | | | Both the MR12 and MR16 are single gigabit ethernet devices, similar to the MR18. This change gives them the correct network config on a fresh install. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> [Jo-Philipp Wich: adjust for alphabetical ordering, line wrap commit msg] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: fix ethernet on wpj344 boardChristian Mehlis2016-10-311-0/+1
| | | | | | | | | In 814d70b2 the member mac06_exchange_en of struct ar8327_pad_cfg was changed to mac06_exchange_dis, but wpj344 was not adopted to stay in sync. Signed-off-by: Christian Mehlis <christian@m3hlis.de> Reported-by: Nick Dennis <ndennis@rapiduswireless.com>
* lldpd: freeze execution of lldpd during reloadAlexandru Ardelean2016-10-311-1/+5
| | | | | | | | | | During reload, we could send invalid information to the other side and confuse it. That's why, during reload we'll pause execution, do the reconfig and resume + update when reload is done. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* lldpd: fix reload function for when interfaces changeAlexandru Ardelean2016-10-312-20/+44
| | | | | | | | | | | | | | | | The problem is that interfaces are specified at start as command line arguments, making them unchange-able via reload. That means, we have to move (since lldpd allows this) the interfaces-match-pattern option to be in a config file and reload the configuration. It's either that, or do a 'restart'. Since we're generating the lldpd.conf file, we'll have to move the 'sysconfdir' of lldpd to /tmp, where the files will get written ; this will prevent any unncessary flash writes. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ath10k-firmware: update qca9984 firmwarePavel Kubelun2016-10-311-2/+3
| | | | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> [Jo-Philipp Wich: add mirror sha256 sum] Signed-off-by: Jo-Philipp Wich <jo@mein.io>