aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* base-files: add /usr/share/libubox/jshn.sh to sysupgrade stage2Russell Senior2019-11-131-1/+1
| | | | | | | | Discovered recent changes had broken sysupgrade for ar71xx mikrotik rb-493g, traced the problem to missing /usr/share/libubox/jshn.sh after switching to tmpfs. Signed-off-by: Russell Senior <russell@personaltelco.net>
* ramips: add usb-ledtrig-usbport to DEVICE_PACKAGES of CY-SWR1100Sungbo Eo2019-11-131-1/+1
| | | | | | | | | CY-SWR1100 has a USB LED but kmod-usb-ledtrig-usbport is missing in default images. This commit adds it. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [changed commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: change status LED of Samsung CY-SWR1100Sungbo Eo2019-11-131-4/+6
| | | | | | Use power LED for status indication and free WPS LED for other uses. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: improve Samsung CY-SWR1100 supportSungbo Eo2019-11-132-5/+10
| | | | | | | | | | | | | | | | | | | | | | This patch does the following: - rename "devdata" flash partition and make it read-only - switch from gpio-keys-polled to gpio-keys - add missing power LED - set correct PCI ID to compatible string in wifi node - remove ralink,5ghz property in wifi node - provide label MAC address Rename devdata partition to devconf as indicated in the stock firmware partition table: 00030000-00040000: "devdata" 00040000-00050000: "devconf" Power LED can be controlled by SoC GPIO. Add it in the dts leds node. RT3092L supports only bgn mode, so it is unnecessary to disable 5GHz band. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: fix MAC address setup for Samsung CY-SWR1100Sungbo Eo2019-11-131-1/+2
| | | | | | | | | Ethernet MAC address setup has been broken since c3e420f28cf1. Restore original setting. Fixes: c3e420f28cf1 ("ramips: Add support for D-Link DCH-M225") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ar71xx: fix MAC addresses for Archer C5 v1, C7 v1/v2, WDR4900 v2Adrian Schmutzler2019-11-132-3/+2
| | | | | | | | | | | | | | | | | | | As discussed in 1d18a14a90c7 ("ath79: really fix TP-Link Archer C7 v2 MAC address"), stock firmware MAC address assignment is actually as follows: wlan0 (5GHz) : -1 wlan1 (2.4GHz) : 0 eth1 (LAN) : 0 eth0 (WAN) : 1 This has never been fixed for ar71xx, so let's do it now. Note that with WDR4900 v2 even both wlan0 and wlan1 where assigned to basemac-1 before ... Fixes: FS#408 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: read label MAC address from flash instead of using phy0/phy1Adrian Schmutzler2019-11-131-2/+2
| | | | | | | | | | | | | | | | | | | | | This replaces all uses of $(cat /sys/class/ieee80211/phyX/macaddress) by retrieval from the proper flash locations. This will make 02_network independent of WiFi setup again. For future reference: The MAC addresses of the FRITZ!WLAN Repeater 300E can be extracted from the urlader key value store: maca *:6B macb *:6C macwlan *:6D macdsl *:6E and be set by e.g. addr=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: read label MAC address from flash instead of using phy0/phy1Adrian Schmutzler2019-11-134-11/+14
| | | | | | | | This replaces all uses of $(cat /sys/class/ieee80211/phyX/macaddress) by retrieval from the proper flash locations. This will make 02_network independent of WiFi setup again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: remove shebang from uci-defaults filesAdrian Schmutzler2019-11-134-7/+1
| | | | | | | | | uci-defaults are sourced and non-executable, so they do not require a shebang. While at it, apply consistent naming scheme. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: image: posix compatibility cut v headKevin Darbyshire-Bryant2019-11-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | Replace 2 instances of non posix use of 'head' with posix compliant 'cut'. 'head -c n' cuts 'n' bytes from the passed string and happens to work on Linux & Mac OS X even though '-c' is not posix. 'head --bytes n' does the same thing and happens to work on linux but not on Mac OS X and is also not posix. 'cut -b1-8' cuts the first 8 bytes from the passed string and is posix compliant, hence works on Linux & Mac OS X. Our usage of 'head --bytes' was particularly unfortunate since it was used to calculated the RootFS UUID passed to grub - the net result being a non-functioning system waiting for the root file system to appear. Thanks to karlp, ynezz & others for pointers on solving this. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* base-files: add 'wifi reconf'John Crispin2019-11-122-1/+6
| | | | | | | | Now that netifd and hostapd allow dynamic reconfiguration, add a command to trigger it. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: add support for dynamically reconfiguring wifiJohn Crispin2019-11-122-37/+135
| | | | | | | | | Change scripts to use ubus interface of hostapd/wpa_supplicant to add/remove/modify wireless interfaces instead of (re-)starting the services. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add ubus reloadJohn Crispin2019-11-129-20/+601
| | | | | | | | | | | | | | | Add ubus interface to hostapd and wpa_supplicant to allow dynamically reloading wiface configuration without having to restart the hostapd process. As a consequence, both hostapd and wpa_supplicant are now started persistently on boot for each wifi device in the system and then receive ubus calls adding, modifying or removing interface configuration. At a later stage it would be desirable to reduce the services to one single instance managing all radios. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: add dynamic wireless reconfigurationDaniel Golle2019-11-121-3/+3
| | | | | | | | | | | | | 7a723d0 wireless: add ubus method for reloading configuration e15147c wireless: make reconf opt-in and allow serializing configuration Set new option 'reconf' in 'wifi-device' section to enable dynamic re-configuration on that radio. If necessary, also set option 'serialize' which forced netifd to configure interfaces of wireless devices one-by-one. Both options are disabled by default. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 4.19 to 4.19.82Koen Vandeputte2019-11-1213-260/+47
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 950-0295-sc16is7xx-Fix-for-Unexpected-interrupt-8.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.152Koen Vandeputte2019-11-123-11/+10
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 301-arch-support-layerscape.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.199Koen Vandeputte2019-11-122-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: fix SUPPORTED_DEVICES for TP-Link TL-WR1043ND v3Adrian Schmutzler2019-11-111-1/+1
| | | | | | | | | In ar71xx, the board name for the TL-WR1043ND v3 is equal to v2: tl-wr1043nd-v2 Fix SUPPORTED_DEVICES for v3 in ath79 accordingly. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: remove redundant WiFi LED on FRITZ!Box 7320Manuel Kock2019-11-111-3/+0
| | | | | | | | | The led wireless trigger is already set correctly to phy0tpt through the alias in the device tree. Signed-off-by: Manuel Kock <github.web@manu.li> [rephrased commit title] Signed-off-by: David Bauer <mail@david-bauer.net>
* fwtool: update to latest Git headPetr Štetiar2019-11-115-681/+11
| | | | | | | | | | | | | | | | | | Includes following changes: 9d9d4c284786 fix possible garbage in unitialized char* struct members dbc1b1b71b24 fix possible copy of null buffer and validation of unitialized header 76d53deef8bb crc32: add missing stdint.h dependency e5666ed3b47c add cram based unit tests abe0cf7de053 add initial GitLab CI support e43042507b4f iron out extra compiler warnings 5df0cd6e1523 convert into CMake project a7dc0526f819 refactor into separate Git project adds missing PKG_LICENSE field and converts the package build to utilize CMake. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86,tegra,mvebu: image: use common reproducible IMG_PART_SIGNATUREPaul Spooren2019-11-113-12/+7
| | | | | | | | | | | | | These targets are currently using more or less same SIGNATURE variable which provides unique partition ID/signature, so it makes sense to refactor it out into common IMG_PART_SIGNATURE variable which could be reused by all targets. This is another step in the direction of reproducible OpenWrt images. Signed-off-by: Paul Spooren <mail@aparcar.org> [split into separate commit, renamed to IMG_PART_SIGNATURE] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: image: add common and reproducible IMG_PART_SIGNATURE variablePaul Spooren2019-11-111-0/+1
| | | | | | | | | | | | | | x86, mvebu and tegra targets are currently using more or less same SIGNATURE variable which provides unique partition ID/signature, so it makes sense to refactor it out into common variable which could be reused by all targets. While at it, make the content of the variable reproducible. Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-March/016148.html Signed-off-by: Paul Spooren <mail@aparcar.org> Suggested-by: Jo-Philipp Wich <jo@mein.io> [renamed to IMG_PARTSIGNATURE, reworked with epoch+vermagic hash] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: split further base-files across subtargetsAdrian Schmutzler2019-11-116-21/+68
| | | | | | | | | | | As started in 19724e28c81e ("ramips: split base-files into subtargets"), this moves some smaller left-over files to the appropriate base-files folder of their subtarget: - /etc/init.d/bootcount - /etc/uci-defaults/04_led_migration Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix identifier for Nanostation M in ath9k caldata extractionAdrian Schmutzler2019-11-111-1/+1
| | | | | | | | When Nanostation M was renamed from ubnt,nano-m to ubnt,nanostation-m in commit f1396ac753cc ("ath79: align naming of Ubiquiti Nanostation M"), the caldata extraction in 10-ath9k-eeprom was overlooked. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* firmware: intel-microcode: bump to 20190918Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | * New upstream microcode datafile 20190918 *Might* contain mitigations for INTEL-SA-00247 (RAMBleed), given the set of processors being updated. * Updated Microcodes: sig 0x000306d4, pf_mask 0xc0, 2019-06-13, rev 0x002e, size 19456 sig 0x000306f4, pf_mask 0x80, 2019-06-17, rev 0x0016, size 18432 sig 0x00040671, pf_mask 0x22, 2019-06-13, rev 0x0021, size 14336 sig 0x000406f1, pf_mask 0xef, 2019-06-18, rev 0xb000038, size 30720 sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792 sig 0x00050657, pf_mask 0xbf, 2019-08-12, rev 0x500002b, size 51200 sig 0x00050662, pf_mask 0x10, 2019-06-17, rev 0x001c, size 32768 sig 0x00050663, pf_mask 0x10, 2019-06-17, rev 0x7000019, size 24576 sig 0x00050664, pf_mask 0x10, 2019-06-17, rev 0xf000017, size 24576 sig 0x00050665, pf_mask 0x10, 2019-06-17, rev 0xe00000f, size 19456 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* rpcd: update to latest Git HEADJo-Philipp Wich2019-11-101-3/+3
| | | | | | 77ad0de plugin: avoid truncating numeric values Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: correct Netgear WNDR3700v5 button flagDavid Bauer2019-11-101-3/+3
| | | | | | | | | This adjusts the GPIO state flag to ACTIVE_LOW as FCC pictures indicate the base board is identical to the one of the R6220. Fixes commit 3459013257e0 ("ramips: correct R6220 button flag") Signed-off-by: David Bauer <mail@david-bauer.net>
* firmware: intel-microcode: bump to 20190618Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223 CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091 * Updated Microcodes: sig 0x000206d6, pf_mask 0x6d, 2019-05-21, rev 0x061f, size 18432 sig 0x000206d7, pf_mask 0x6d, 2019-05-21, rev 0x0718, size 19456 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: intel-microcode: bump to 20190514Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * New Microcodes: sig 0x00030678, pf_mask 0x02, 2019-04-22, rev 0x0838, size 52224 sig 0x00030678, pf_mask 0x0c, 2019-04-22, rev 0x0838, size 52224 sig 0x00030679, pf_mask 0x0f, 2019-04-23, rev 0x090c, size 52224 sig 0x000406c3, pf_mask 0x01, 2019-04-23, rev 0x0368, size 69632 sig 0x000406c4, pf_mask 0x01, 2019-04-23, rev 0x0411, size 68608 sig 0x00050657, pf_mask 0xbf, 2019-02-27, rev 0x5000021, size 47104 sig 0x000806e9, pf_mask 0x10, 2018-10-18, rev 0x009e, size 98304 sig 0x000806eb, pf_mask 0xd0, 2018-10-25, rev 0x00a4, size 99328 sig 0x000806ec, pf_mask 0x94, 2019-02-12, rev 0x00b2, size 98304 sig 0x000906ec, pf_mask 0x22, 2018-09-29, rev 0x00a2, size 98304 sig 0x000906ed, pf_mask 0x22, 2019-02-04, rev 0x00b0, size 97280 * Updated Microcodes: sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x000306d4, pf_mask 0xc0, 2019-03-07, rev 0x002d, size 19456 sig 0x000306e4, pf_mask 0xed, 2019-03-14, rev 0x042e, size 16384 sig 0x000306e7, pf_mask 0xed, 2019-03-14, rev 0x0715, size 17408 sig 0x000306f2, pf_mask 0x6f, 2019-03-01, rev 0x0043, size 34816 sig 0x000306f4, pf_mask 0x80, 2019-03-01, rev 0x0014, size 18432 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x00040661, pf_mask 0x32, 2019-02-26, rev 0x001b, size 25600 sig 0x00040671, pf_mask 0x22, 2019-03-07, rev 0x0020, size 14336 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 sig 0x000406f1, pf_mask 0xef, 2019-03-02, rev 0xb000036, size 30720 sig 0x00050654, pf_mask 0xb7, 2019-04-02, rev 0x200005e, size 32768 sig 0x00050662, pf_mask 0x10, 2019-03-23, rev 0x001a, size 32768 sig 0x00050663, pf_mask 0x10, 2019-03-23, rev 0x7000017, size 24576 sig 0x00050664, pf_mask 0x10, 2019-03-23, rev 0xf000015, size 23552 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000506f1, pf_mask 0x01, 2019-03-21, rev 0x002e, size 11264 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000806e9, pf_mask 0x10, 2019-04-01, rev 0x00b4, size 98304 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000806ea, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000806eb, pf_mask 0xd0, 2019-03-30, rev 0x00b8, size 98304 sig 0x000806ec, pf_mask 0x94, 2019-03-30, rev 0x00b8, size 97280 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304 sig 0x000906ed, pf_mask 0x22, 2019-03-17, rev 0x00b8, size 97280 * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223 CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mac80211: Fix dependencies of kmod-rsi91x-usbHauke Mehrtens2019-11-091-2/+2
| | | | | | | | | | Instead of depending on kmod-usb2 make it depend on the normal USB dependencies. This should hopefully fix some problems seen in the build bot builds for powerpc_8540. In addition also activate DRIVER_11N_SUPPORT support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* strace: Fix build on PowerPCHauke Mehrtens2019-11-091-17/+0
| | | | | | | | This patch breaks building on PowerPC, like the mpc85xx_generic target for me. Fixes: FS#2585 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: correct R6220 button flagDavid Bauer2019-11-091-3/+3
| | | | | | | | | | | | | | All buttons on the Netgear R6220 are active-low while they are flagged as active-high. The GPIO status reads the following for no buttons pressed: root@64367-r6220:~# cat /sys/kernel/debug/gpio gpio-7 ( |wps ) in hi gpio-8 ( |wifi ) in hi gpio-14 ( |reset ) in hi Signed-off-by: David Bauer <mail@david-bauer.net>
* nghttp2: Fix pkgconfig fileRosen Penev2019-11-091-7/+5
| | | | | | | | | | lib and includedir point to the host, not staging_dir. Note that prefix and exec_prefix is overriden to point to staging_dir. As CMAKE_INSTTALL is passed, switched InstallDev to use cmake.mk's rule. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libevent2: Fix pkgconfig directoriesRosen Penev2019-11-091-8/+5
| | | | | | | | | | | includedir and libdir are set to /usr/include and /usr/lib . This breaks compilation with packages such as tmux that use pkgconfig to find libevent Also added PKG_LICENSE_FILES. Simplified the InstallDev section by using cmake.mk's default rule. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipset: update to 7.4DENG Qingfang2019-11-091-2/+2
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* uboot-envtools: Add TARGET_LDFLAGS to fix PIE and RELROHauke Mehrtens2019-11-092-11/+9
| | | | | | | | | Forward the OpenWrt TARGET_LDFLAGS to the linker of the fw_printenv tool. In addition also use the more standard make invocation script. With this change the fw_printenv tool is built with PIE and Full RELRO support when activated globally in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* xfsprogs: Fix compilation with newer muslRosen Penev2019-11-093-6/+49
| | | | | | Backported upstream patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* busybox: update to 1.31.1Hannu Nyman2019-11-091-2/+2
| | | | | | | | | | | Update busybox to 1.31.1 Small bug fix release. Fixes for dc, ash (PS1 expansion fix), hush, dpkg-deb, telnet and wget. No need to refresh patches or config. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* brcm63xx: add linux 4.19 supportÁlvaro Fernández Rojas2019-11-09181-1/+22307
| | | | | | | | | Boot tested on Comtrend AR-5387un: https://gist.github.com/Noltari/57e5030455da8dc38e61f8c3a5922254 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jonas.gorski: make 4.19 an optional testing version; add gcc 8.3 fix] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mxs: start a console on USB gadget serial portsMichael Heimpold2019-11-091-0/+1
| | | | | | | | | | | | The I2SE Duckbill devices are pen-drive like and thus the usage of the USB gadget subsystem is highly indicated. Spawning a console if a serial gadget is configured saves us from connecting a physical debug uart. On Olimex OLinuXino Maxi/Mini boards, this does not hurt. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* mxs: switch to askconsoleMichael Heimpold2019-11-091-1/+1
| | | | | | | Remove the dedicated tty name and use askconsole to spawn the console on serial debug uart. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* procd: start additional consoles during hotpluggingMichael Heimpold2019-11-092-1/+5
| | | | | | | | Now that 'start-console' procd command has reached the main repo, we can add a rule to start consoles on serial devices which are created when USB gadget driver reports creation with hotplugging. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* mxs: add support and switch to kernel 4.19Michael Heimpold2019-11-093-76/+19
| | | | | | | | | | Also remove kernel 4.14 support and the meanwhile obsolete patch. This was run-tested on I2SE Duckbill device and Olimex OLinuXino Maxi board. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Tested-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-mxs: bump to v2019.10Michael Heimpold2019-11-092-9/+11
| | | | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Run tested on I2SE Duckbill and Olimex OLinuXino Maxi boards. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* usign: Activate LTO compile optionHauke Mehrtens2019-11-081-0/+3
| | | | | | | | | | | | This decreases the size of the usign application by 16% on MIPS BE. old: 24,597 /usr/bin/usign new: 20,501 /usr/bin/usign Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* swconfig: Activate LTO compile optionHauke Mehrtens2019-11-081-0/+3
| | | | | | | | | | | | This decreases the size of the swconfig application by 25% on MIPS BE. old: 16,916 /sbin/swconfig new: 12,565 /sbin/swconfig Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mtd: Activate LTO compile optionHauke Mehrtens2019-11-081-1/+2
| | | | | | | | | | | | This decreases the size of the mtd application by 25% on MIPS BE. old: 20,597 /sbin/mtd new: 16,421 /sbin/mtd Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: Activate LTOHauke Mehrtens2019-11-081-2/+2
| | | | | | | | | | | | This decreases the binary size when PIE ASLR is activated by 8% on MIPS BE. old: 202,020 /usr/sbin/dnsmasq new: 185,676 /usr/sbin/dnsmasq Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uci: update to latest to version 2019-11-08Hauke Mehrtens2019-11-081-3/+3
| | | | | | | fc417e8 build: Add -Wclobbered to detect problems with longjmp 2c8e4a3 util: Fix error path Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: create shared DTSI for Netgear EX2700 and WN3000RP v3Adrian Schmutzler2019-11-083-162/+104
| | | | | | | | | This moves shared code of the named devices into a common DTSI. Remove setting status="okay" for &gpio0 as it's not disabled in mt7620a.dtsi. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 11:19:07 +0000