aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* iperf: allow non-ipv6 buildsAlexander Couzens2018-11-032-1/+27
| | | | | | | | Add configure argument --disable-ipv6 when ipv6 is deselected. Add fix-non-ipv6-builds.patch as long there is no new upstream release. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: fix leds on GL.iNet GL-MT300N-V2Martin Weinelt2018-11-022-1/+2
| | | | | | | The WAN LED now shows the link state. It's color is green, not blue. Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
* curl: noop commit to refer CVEs fixed in 7.62.0Hans Dedecker2018-11-021-1/+0
| | | | | | | | | | | | | When bumping Curl to 7.62.0 in commit 278e4eba09 I did not include the fixed CVEs in the commit message; this commit fixes this. The following CVEs were fixed in 7.62.0 : CVE-2018-16839 CVE-2018-16840 CVE-2018-16842 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ipq-wifi: drop custom board-2.binsChristian Lamparter2018-11-014-5/+2
| | | | | | | | | | | | | The BDFs for all boards were upstreamed to the ath10k-firmware repository and linux-firmware.git. We switched to the upstream board-2.bin, hence the files can be removed here. Keep the ipq-wifi package in case new boards are added. It might take some time till board-2.bins send upstream are merged. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: nbg6617: switch to upstream boardfile variantChristian Lamparter2018-11-011-0/+2
| | | | | | | The NBG6617's boardfile was merged and this device can now switch to the upstream ath10k board-2.bin. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: update board-2.bin for community firmwaresChristian Lamparter2018-11-011-3/+3
| | | | | | | | This patch updates the board-2.bin for the default IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct and -ct-htt firmwares. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: rt-ac58u: replace ubi auto load hackChristian Lamparter2018-11-012-29/+4
| | | | | | | | | | | | This patch replaces the custom autoload quirk of the RT-AC58U with a bootargs-append overwrite. The vendor's u-boot doesn't leave the bootargs / cmdline alone, so the it can't be overwritten in any other way right now... And of course, this will be a lot of fun to deal with once the device switches to the new spi-nand subsystem. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: Remove dependencies on old kernelsRosen Penev2018-11-016-8/+8
| | | | | | Kernels 4.1 and 4.4 are not part of the tree anymore. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/patch: Add fedora patch for crashing git style patchesRosen Penev2018-11-012-1/+54
| | | | | | | | https://lists.gnu.org/archive/html/bug-patch/2018-10/msg00000.html I assume a CVE number will be assigned soon. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libconfig: Fix tarball filename (and URL)Daniel Engberg2018-11-011-3/+3
| | | | | | v$(PKG_VERSION).tar.gz is a bad idea and will clash for obvious reasons. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* scripts: update config.guess and config.subHauke Mehrtens2018-11-012-1624/+1649
| | | | | | | | | | | | This updates these two files to commit 2fa97a8a0ed3 ("config.guess (amd64:CYGWIN*:*:*, x86_64:CYGWIN*:*:*): Set master") which is the current master of https://git.savannah.gnu.org/gitweb/?p=config.git;a=summary This contains updates for multiple architectures and will unbreak the build on the x32 ABI. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: fix libressl build on x32 (amd64ilp32) hostThorsten Glaser2018-11-011-0/+4
| | | | | | disable use of assembly code since x32 gets misdetected as amd64 Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
* uboot-mxs: bump to v2018.09Michael Heimpold2018-11-014-130/+72
| | | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices and remove upstreamed patch for LibreSSL support. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* tools/ccache: update to 3.5Hannu Nyman2018-11-012-3/+3
| | | | | | Update ccache to 3.5 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mwlwifi: update to version 10.3.8.0-20181029Kabuli Chana2018-11-011-3/+3
| | | | | | compile / test target mvebu / mamba Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kernel: add kmod-usb-serial-mos7840Thomas Fuzeau2018-11-011-0/+15
| | | | | | Enable build of kernel module for mos7840 usb-serial devices. Signed-off-by: Thomas Fuzeau <tfuzeau@loocla.com>
* curl: bump to 7.62.0Hans Dedecker2018-10-312-3/+3
| | | | | | Refresh patches, for changes in version 7.62.0 see https://curl.haxx.se/changes.html#7_62_0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* openssl: enable OPENSSL_WITH_DEPRECATED when OpenSSL is built as a build depMatthias Schiffer2018-10-302-2/+6
| | | | | | | | | | | | | | | | | | | | Some package (e.g. libunbound) depend on OPENSSL_WITH_DEPRECATED. In some situations it may happen that libunbound and openssl are only pulled in as build dependencies, but are not enabled in .config. In such cases, the defaults of symbols like OPENSSL_WITH_DEPRECATED are ignored (as the whole symbol depends on PACKAGE_libopenssl), and config symbol dependencies of libunbound aren't effective either (as libunbound is not actually enabled). This commit works around the issue by introducing a hidden negated symbol OPENSSL_NO_DEPRECATED, which is always disabled when PACKAGE_libopenssl is disabled, and ensures that OpenSSL is built with deprecated APIs in this case. A user can still manage to break the build by explicitly enabling libopenssl and disabling OPENSSL_WITH_DEPRECATED; the interaction between build dependencies and config symbols will require further discussion. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* dnsmasq: tighten config file permissionsKevin Darbyshire-Bryant2018-10-301-6/+6
| | | | | | | | | | | | | | | | | | Install following as config files (600) perms instead of as data (644) /usr/share/dnsmasq/dhcpbogushostname.conf /usr/share/dnsmasq/trust-anchors.conf /usr/share/dnsmasq/rfc6761.conf /etc/hotplug.d/ntp/25-dnsmasqsec /etc/config/dhcp /etc/dnsmasq.conf dnsmasq reads relevant config files before dropping root privilege and running as dnsmasq:dnsmasq ntpd runs as root so the hotplug script is still accessible Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ar71xx: expand kernel size for ubnt targetsKoen Vandeputte2018-10-291-2/+2
| | | | | | | | | | Kernel 4.14 is pretty large causing a build error as the partition is too small. Expand the kernel partition a bit to make it fit. * ubnt-uap-pro * ubnt-unifi-outdoor-plus Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: disable ap91-5g due to kernel sizeKoen Vandeputte2018-10-291-1/+0
| | | | | | | | | | | | This target causes a build failure as the kernel image does not fit into the kernel partition. As the kernel is located behind the rootfs, it cannot be enlarged as the boot entry location would get altered. Disable this target for now. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: fix sysupgrade generation for some targetsKoen Vandeputte2018-10-291-12/+6
| | | | | | | | | | | | | | | | | These targets are already defined as having a dynamic partition but the safeloader was not adapted for them. This causes a build warning for the sysupgrade image being too big. Targets: - c58-v1 - c60-v1 - c60-v2 - TL-WR1043 v5 - TL-WR902AC v1 - TL-WR942N V1 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: switch more targets to dynamic partitioningKoen Vandeputte2018-10-292-35/+20
| | | | | | | | | | | | | Targets: - TP-LINK ER355 - TP-LINK C25 V1 - TP-LINK C59 V1 - TP-LINK C7 V4 - TP-LINK C7 V5 Fixes build issues seen due to the kernel being too big Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: switch TP-Link RE450 v1 to dynamic partitioningRadek Dostál2018-10-292-7/+4
| | | | | | | | | | | | | | | | | As mentioned in commit 5f24933 recent changes on ar71xx (switch to 4.14, memory compaction, ...) cause an increase in kernel size, making it too big for RE450. RE450 images were not build due to the following error message: os-image partition too big (more than 1572864 bytes): Success Tested on RE450, device boots and was used to send this patch. Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Suggested-by: David Bauer <mail@david-bauer.net> Signed-off-by: Radek Dostál <rd@radekdostal.com> [rewrote commit msg keeping it tight + fixed SoB lines] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: move OCEDO Koala to generic and use dynamic partitioningDavid Bauer2018-10-294-14/+10
| | | | | | | | | | | This changes the OCEDO Koala flash-layout to a unified firmware partition, thus making the ar71xx-generic kernel fit in flash. Compile and runtested on OCEDO Koala. Signed-off-by: David Bauer <mail@david-bauer.net> [small title reword] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: fix PQI Air Pen supportMathias Kresin2018-10-281-0/+0
| | | | | | Use the correct dts filename. It has to be <soc>_<manufacturer>_<device>. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: add support for PQI Air PenYuheiOKAWA2018-10-284-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: AR9330 (or AR9331 revision?) Ethernet x1, Wireless 2.4G, uSD card slot x1. USB Power, include Li-Po Battery. Flash 8MiB. (factory is dual image) 1. write image is use half 4MiB size from factory. write initramfs image to mtd6 and mtd7. 2. change next boot setting. next is mtd6 boot. echo -ne "\x01" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0 3. rewrite sysupgrade image. change next boot setting. next is mtd4. echo -ne "\x00" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0 OEM mtd. dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00010000 00010000 "ART" mtd3: 00010000 00010000 "NVRAM" mtd4: 00140000 00010000 "uImage" mtd5: 00280000 00010000 "rootfs" mtd6: 00140000 00010000 "uImage2" mtd7: 00280000 00010000 "rootfs2" mtd8: 00010000 00010000 "CONF" Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
* ath79: Add support for Ubiquiti LiteAP ac (LAP-120)Roger Pueyo Centelles2018-10-284-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Ubiquiti LiteAP ac (LAP-120), an outdoor 5 GHz AC access point with an integrated 120° 16 dBi antenna. The device was previously known as LiteBeam AP ac but was later rebranded. CPU: Atheros AR9342 SoC RAM: 64 MB DDR2 Flash: 16 MB NOR SPI Ports: 1 GbE port (PoE in) WLAN: 5 GHz QCA899X (PCI) The integrated QCA899X is a Ubiquiti branded part with modified vendor and product id (0777:11ac9). It is very similar to the NanoStation loco AC, except for the 2.4 GHz management radio (missing here). Installation procedure is the same as the NanoStation [loco] AC: 1. Connect to serial header on device 2. Power on device and enter uboot console 3. Set up tftp server serving an openwrt initramfs build 4. Load initramfs build using the command tftpboot in the uboot cli 5. Boot the loaded image using the command bootm 6. Copy squashfs openwrt sysupgrade build to the booted device 7. Use mtd to write sysupgrade to partition "firmware" 8. Reboot and enjoy Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* mt76: update to the latest versionFelix Fietkau2018-10-271-3/+3
| | | | | | fdc63f1 mt76: fix regression in tx status handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: Fix dependencies for PCI supportDaniel Engberg2018-10-261-5/+5
| | | | | | | | | | USB support doesn't necessarily mean that there's PCI support available so move that to the drivers which requires PCI support. This applies to the sunxi platform for instance. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mt76x0e]
* mt76: update to the latest versionFelix Fietkau2018-10-251-3/+3
| | | | | | | | | | | 0b8b15f mt7603: use common mmio mcu struct d612e2e mt76: mt76x02: skip station tx status for non-sta wcid entries d89d84b mt76: mt76x02: only override control->sta on sw-encrypted tx 9d59d2a mt76: add support for reporting tx status with skb ed17ba2 mt7603: use common tx status handling code 14b6c59 mt76x0: use band parameter for LC calibration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* grub2: fix regression caused by binutils-2.31.1Philip Prindeville2018-10-252-1/+76
| | | | | | | | | | | | | grub-efi no longer works: grub-mkimage: error: relocation 0x4 is not implemented yet. See: http://git.savannah.gnu.org/cgit/grub.git/commit/util?id=842c390469e2c2e10b5aa36700324cd3bde25875 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>i [PKG_RELEASE increase]
* mwlwifi: driver version to 10.3.8.0-20181022Jonathan Lancett2018-10-241-3/+3
| | | | | | | | | | | | Upgrade 88W8997 firmware to 8.4.0.52. Removed unnecessary firmware settings. Added vendor events. Fixed crash problem when module is removed. Modified the code to protect tx queues. Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com> [tidy commit message] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* glibc: update to latest 2.27 commit (BZ #23562, BZ #23275)Hans Dedecker2018-10-231-2/+2
| | | | | | | 77b4b8231e signal: Use correct type for si_band in siginfo_t [BZ #23562] 5bdb6897fc Fix race in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP [BZ #23275] Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-10-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | d033272 mt76: mt76x0: handle chip specific initval differences 1a2b2dc mt76: usb: fix static tracepoints 11151f4 mt76x0: antenna select corrections dade109 mt76x0: init: simplify mt76x0_init_mac_registers 3c54612 mt76x0: pci: add missing MODULE_FIRMWARE macro 97e0269 mt76x0: mac: remove mt76x0_mac_set_ampdu_factor 5d8c4bf mt76x0: align mt76x0u and mt76x0e fw version d4391ae mt76: move mt76x02_mac_set_short_preamble in mt76x02_mac.c aa6ebf9 mt76: move mt76x02_init_device in mt76x02-lib module a4a08c3 mt76: move mac beacon routines in mt76x02-lib module 6b69650 mt76: move tx beacon routines in mt76x02-lib module 8486047 mt76x0: pci: add pre_tbtt_tasklet support acd4c99 mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib module 2d736cf mt76: move mt76x02_get_txpower in mt76x02_util.c aa1d6bd mt76: move mt76x02_sta_ps in mt76x02-lib module e684281 mt76: introduce mt76x02_init_beacon_config routine c181d97 mt76x0: pci: enable AP support 3b86d99 mt76: move mt76x02_set_tx_ackto in mt76x02-lib module 41d7ef7 mt76x0: update init vals for MT_TX_PROT registers fe5a149 mt76: move tx protection routines in mt76x02-lib module 5bca2de mt76: move mt76x02_bss_info_changed in mt76x02-lib module d21a835 mt76: move dfs support in mt76x02-lib module ba9d424 mt76x0: pci: add DFS support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing symbol for target bcm53xxKoen Vandeputte2018-10-231-0/+1
| | | | | | | Fixes: ca88f4153f8f ("kernel: bump 4.14 to 4.14.77") Reported-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: use upstream SPI controller fixRafał Miłecki2018-10-231-3/+5
| | | | | | This just moves patch to use 0xx prefix and includes maintainer's s-o-b. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.78Koen Vandeputte2018-10-226-59/+11
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.135Koen Vandeputte2018-10-223-13/+13
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2018-10883 Compile-tested on: ar71xx, layerscape Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* fstools: update to git HEADHans Dedecker2018-10-211-3/+3
| | | | | | 29e53af fstools: add ntfs support Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: hermes-pcmcia: add missing dependency to kmod-pcmcia-coreHauke Mehrtens2018-10-211-1/+1
| | | | | | This fixes a build problem on x86. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: intel: Add iwl 9000 and 9260 firmwareHauke Mehrtens2018-10-201-0/+14
| | | | | | | Add the most recent supported firmware file for the Intel 9000 and 9260 wireless chips. The API version 41 is not yet supported by the driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: intel: update firmware files for 7265D, 8000C and 8265Hauke Mehrtens2018-10-201-3/+3
| | | | | | Use more recent versions for the Intel wireless chips 7265D, 8000C and 8265. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mpc85xx: workaround 4.14 cross compile issueRyan Mounce2018-10-201-0/+10
| | | | | | | | | | | Regression introduced with 4.10 by 43c9127d94d62a232ed33ed2eab8a08657ce5472 Build will fail if system 'ar' does not support deterministic builds. e.g. macOS with Xcode toolchain Appears to be fixed upstream in 4.18 by af3901cbbd3de182aafb8ee553c825c0074df6a2 Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* tools/pkg-config: pass arguments at the endArthur Skowronek2018-10-201-1/+1
| | | | | | | | | | | | | | | | | | Go for openwrt passes pkg-config arguments in the format of pkg-config --cflags -- pkg-name which in turn will be passed down to the real pkg-config as something like pkg-config.real --cflags -- pkg-name --define... and causes the real pkg-config implementation to missinterpret the given argument list. This also helps to fix https://github.com/golang/go/issues/27940 Signed-off-by: Arthur Skowronek <arthur.skowronek@tuta.io>
* mwlwifi: driver version to 10.3.8.0-20181008Yufei Miao2018-10-201-3/+3
| | | | Signed-off-by: Yufei Miao <myf@myf.cloud>
* kernel/modules: Aosong AM2315/AM2320 IIO kernel module support enabled.Roman Bazalevskiy2018-10-201-0/+13
| | | | Signed-off-by: Roman Bazalevskiy <rvb@rvb.name>
* kernel/modules: add kmod-fou6 packageDeng Qingfang2018-10-201-0/+21
| | | | | | IPv6 support for Foo-over-UDP tunnel Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* linux-firmware: Update linux-firmware to 2018-10-18Robert Marko2018-10-201-4/+4
| | | | | | | | | | | | | | | Kalles ath10k PR was finally merged so update linux-firmware to include those changes. This is needed since disabling ath10k-firmware a lot of custom BDF-s in board-2.bin-s are not available in previously outdated linux-firmware board-2.bin-s. This also includes support for boards currently using ipq-wifi and other WIP ones. Runtime tested on 8devices Jalapeno. Signed-off-by: Robert Marko <robimarko@gmail.com>
* apm821xx: add disk-activity triggers via DT.Christian Lamparter2018-10-203-5/+2
| | | | | | | | The WNDR4700 and the MBL have a dedicated HDD activity LED. This patch adds the default led triggers to the DTS and removes the entries in 01_leds. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 02:33:36 +0000