aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add new device ZyXEL Keenetic as knAlexey Belyaev2017-05-107-4/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device exactly same as NBG-419N but with USB port and USB Led. Specification: - SoC: Ralink RT3052 (MIPS24Kc) @384MHz - RAM: 32 MiB - Flash: 8 MiB - WLAN: WiSoC 2T2R/300Mbps (2.4GHz) - LAN: 4x100M - WAN: 1x100M - USB: 1x2.0 Installation via serial console (57600 8N1) from TFTP server - rename the firmware to something shorter, for example "sysupgrade.bin" (max. 32 chars) - copy firmware TFTP server's directory - when you power on device, and see U-Boot log, immediatly push "2" once. - You will see this message: 2: System Load Linux Kernel then write to Flash via TFTP. Warning!! Erase Linux in Flash then burn new one. Are you sure? - Push "y", and enter: device IP, then TFTP server's IP, and then image firmware file name. The firmware will be downloaded within ~30 seconds and flashed to the device (It will take about 2 minutes). Signed-off-by: Alexey Belyaev <spider@spider.vc> [squash commits, compact commit message, fix compatible string, remove superfluous pinmuxes] Signed-off-by: Mathias Kresin <dev@kresin.me>
* dnsmasq: use append_interface_name when using option --interface-nameHans Dedecker2017-05-092-4/+4
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: add interface-name uci list.Daniel Danzberger2017-05-092-1/+7
| | | | | | | | | | | | | | | | | | This patch adds the interface-name option for each dhcp config in /etc/config/dhcp. With the interface_name option users can define a DNS name for each dhcp section that will be resolved by dnsmasq with the underlaying interface address. For example: config dhcp 'lan' option interface 'lan' ... list interface_name 'home.lan' ... Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* ramips: use GPIO_ACTIVE macros in UBNT-ERX.dtsSven Roederer2017-05-061-3/+4
| | | | | | | - reorder includes - use GPIO_ACTIVE_LOW macro instead of hardcoded "1" Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
* ramips: strip padding from TP-Link sysupgrade imagesHenryk Heisig2017-05-051-3/+3
| | | | | | This reduce size of sysupgrade firmware. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: add factory firmware for Tp-Link C20i/C50Henryk Heisig2017-05-051-0/+4
| | | | | | TP-Link firmware doesn't accept sysupgrade.bin with metadata. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* brcm63xx: fix invalid Asmax AR 1004g DTS referenceMarcin Jurkowski2017-05-051-1/+1
| | | | | | | Build profile for Asmax AR 1004g refers to an invalid DTS "rg100a". The correct DTS for this device is "ar1004g". Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* lantiq: fix avm fritz box mac addressesMathias Kresin2017-05-055-9/+17
| | | | | | | | | It has been shown that the Fritz boxes have the correct mac address set in the wireless calibration data/eeeprom. Use this mac address as base for the ethernet and xdsl interface increment/decrement the address to match the values stored in the tffs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86: fix lifting kernel CPU requirements and always enable PAEDaniel Golle2017-05-053-10/+243
| | | | | | | | | commit 89878f60f4 x86: lift kernel minimum CPU requirement to Pentium MMX caused kconfig havoc. Fix this and make sure PAE is enabled even on legacy CPUs as the minimum required CPU has been Pentium MMX for a while now and hence PAE is supported even on the x86_legacy target. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: allow val.% targets to bypass the prepare stepsFelix Fietkau2017-05-051-0/+3
| | | | | | | Significantly reduces time spent processing those targets and should also silence some log clutter which could confuse buildbot Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86/legacy: add missing config symbolJo-Philipp Wich2017-05-051-0/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: lift kernel minimum CPU requirement to Pentium MMXDaniel Golle2017-05-053-3/+3
| | | | | | | Anything older than that isn't supported since commit f4f8f4a180366, hence also switch to Pentium MMX when building the kernel. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: generic: use HIGHMEM64G instead of HIGHMEM4GDaniel Golle2017-05-051-1/+2
| | | | | | | | commit 4b4f73937371 switched on HIGHMEM4G which implicitely disabled PAE and hence also NX and other useful and security-relevant features. Re-enable PAE by switching to HIGHMEM64G. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: keep /boot mounted for kexecDaniel Golle2017-05-051-4/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: make tftp root if not existingAlberto Bursi2017-05-041-1/+1
| | | | | | | | | | If there's a TFTP root directory configured, create it with mkdir -p (which does not throw an error if the folder exists already) before starting dnsmasq. This is useful for TFTP roots in /tmp, for example. Originally submitted by nfw user aka Nathaniel Wesley Filardo Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* dnsmasq: fix dhcp_option usage warningHans Dedecker2017-05-041-1/+2
| | | | | | | Don't display unnecessary dhcp_option usage warning in case dhcp_option is empty Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: purge default packages on MT7621Daniel Golle2017-05-049-29/+48
| | | | | | | | | | | | | | In order to have a smaller initramfs image remove all packages not needed on all devices and add them explicitely for those actually needing them. Also remove wpad-mini from ramips default package set and add it to all sub-targets except for MT7621. While at it reorder packages alphabetically and replace kmod-mt76 with kmod-mt7603 and/or kmod-mt76x2 depending on the chip actually used on a specific board. Hopefully fixes FS#758 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: clean up modules definitionsMatthias Schiffer2017-05-043-45/+5
| | | | | | | | | | | | | | | | | | Module definitions for kmod-wdt-sunxi and kmod-eeprom-sunxi are removed (wdt-sunxi was builtin anyways; nvmem-sunxi, which is the new name of eeprom-sunxi is changed to builtin). As kmod-eeprom-sunxi was specified in DEFAULT_PACKAGES, but not available on kernel 4.4, it was breaking the image builder. Support for kmod-sunxi-ir is added for kernel 4.4 (it is unclear why it was disable before, it builds fine with with kernel 4.4). Condtionals only relevant for pre-4.4 kernels are removed from modules.mk, as sunxi does't support older kernels anymore. Fixes FS#755. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: enable ramdisk for mt7621Paul Spooren2017-05-041-1/+1
| | | | | | Fixes #758 Signed-off-by: Paul Spooren <paul@spooren.de>
* octeon: port missing 4.9 patchesFelix Fietkau2017-05-046-0/+1766
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* armvirt: 64: enable usb supportYousong Zhou2017-05-032-1/+1
| | | | | | | | | It was originally only enabled for the "32" subtarget along with the "usb" feature which is now also shared by the "64" target This should fix the phase1 build of armvirt/64 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq806x: fix EA8500 switch configurationJo-Philipp Wich2017-05-031-1/+1
| | | | | | | | | Do not assign the CPU port twice, this confuses LuCI and possible other programs relying on topology information in board.json. Ref: https://github.com/openwrt/luci/issues/1086 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: add legacy_rates option to disable 802.11b data rates.Nick Lowe2017-05-031-8/+20
| | | | | | | | | | | | | | | | | | Setting legacy_rates to 0 disables 802.11b data rates. Setting legacy_rates to 1 enables 802.11b data rates. (Default) The basic_rate option and supported_rates option are filtered based on this. The rationale for the change, stronger now than in 2014, can be found in: https://mentor.ieee.org/802.11/dcn/14/11-14-0099-00-000m-renewing-2-4ghz-band.pptx The balance of equities between compatibility with b clients and the detriment to the 2.4 GHz ecosystem as a whole strongly favors disabling b rates by default. Signed-off-by: Nick Lowe <nick.lowe@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, defaults change]
* hostapd: fix reload frequency change patchAbhilash Tuse2017-05-032-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When sta is configured, hostapd receives 'stop' and 'update' command from wpa_supplicant. In the update command, hostapd gets sta parameters with which it configures ap. Problem is, with the default wireless configuration: mode:11g freq:2.4GHz channel:1 If sta is connected to 5GHz network, then ap does not work. Ideally with 340-reload_freq_change.patch hostapd should reload the frequency changes and start ap in 5GHz, but ap becomes invisible in the network. This issue can be reproduced with following /etc/config/wireless: config wifi-device radio0 option type mac80211 option channel 1 option hwmode 11g option path 'virtual/uccp420/uccwlan' option htmode 'none' config wifi-iface 'ap' option device 'radio0' option encryption 'none' option mode 'ap' option network 'ap' option ssid 'MyTestNet' option encryption none config wifi-iface 'sta' option device radio0 option network sta option mode sta option ssid TestNet-5G option encryption psk2 option key 12345 This change updates current_mode structure based on configured hw_mode received from wpa_supplicant. Also prepare rates table after frequency selection. Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, patch refresh]
* base-files: implement ucidef_set_hostname(), ucidef_set_ntpserver()Jo-Philipp Wich2017-05-031-0/+20
| | | | | | | | | | | | | | Commit 2036ae4 (base-files: support hostname and ntp servers through board.d) was supposed to implement these procedures but lacked the required changes to uci-defaults.sh. Add the missing procedures now to fix config generation on targets relying on hostname or NTP server presetting. Fixes FS#754. Reported-by: Cristian Morales Vega <cristian@samknows.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* opkg: alternatives: use ERROR level for symlink failureYousong Zhou2017-05-031-3/+3
| | | | | | | | Changes since last version 04e279e pkg_alternatives: use ERROR level for symlink failure Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* busybox: alternatives: accomodate CONFIG_BUSYBOX_CUSTOM=yYousong Zhou2017-05-031-14/+15
| | | | | | | | When busybox customisation is enabled, we should depend on config symbols CONFIG_BUSYBOX_CONFIG_xxx to form alternatives specs Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: reset ALTERNATIVES field in Package/DefaultYousong Zhou2017-05-031-0/+1
| | | | | | | | | Otherwise ipkg packages may wrongly take on alternatives specs of another package sharing the same package Makefile Fixes FS#753 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mediatek: fix sysupgrade on eMMC boardsJohn Crispin2017-05-033-7/+9
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* dnsmasq: bump to 2.77test5Kevin Darbyshire-Bryant2017-05-021-2/+2
| | | | | | | | | | | A number of small tweaks & improvements on the way to a final release. Most notable: Improve DHCPv4 address-in-use check. Remove the recently introduced RFC-6842 (Client-ids in DHCP replies) support as it turns out some clients are getting upset. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* busybox: add alternatives specs for those also provided by procps-ngYousong Zhou2017-05-031-2/+14
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* iproute2: bump PKG_RELEASEYousong Zhou2017-05-021-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* iproute2: add ip-tiny, ip-full as alternatives of /sbin/ipYousong Zhou2017-05-021-10/+16
| | | | | | They will not be in conflict anymore ;) Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* busybox: add as an alternative of /sbin/ipYousong Zhou2017-05-021-1/+2
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* opkg: alternatives supportYousong Zhou2017-05-021-4/+4
| | | | | | | | | | Changes since last version 546bc72 pkg: alternatives support 7a96972 libbb: xreadlink: fix memory leak on failure case 3f13edd pkg_run_script: use pkg->dest in half installed case Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: ipkg: new field AlternativesYousong Zhou2017-05-021-0/+1
| | | | | | | | | | | It's a list of specs of the following form seprated by commas to describe alternatives provided by this package <prio>:<path>:<altpath> <path> will be a symbolic link to <altpath> of the highest <prio> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* build: cleanup tmp/ dir of target rootfsYousong Zhou2017-05-022-1/+2
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* imx6: remove linux 4.4 supportFelix Fietkau2017-05-0226-3811/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target/arc770: switch to 4.9 kernelAlexey Brodkin2017-05-023-13/+33
| | | | | | | | With update of ARC tools to arc-2016.09 based on GCC v6.x we have to bump Linux kernel version so both toolchain and the kernel use the same ARC ABIv4. Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* target/archs38: switch to 4.9 kernelAlexey Brodkin2017-05-023-18/+39
| | | | | | | | With update of ARC tools to arc-2016.09 based on GCC v6.x we have to bump Linux kernel version so both toolchain and the kernel use the same ARC ABIv4. Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* toolchain/arc: update to the most recent release arc-2016.09Alexey Brodkin2017-05-0241-523/+573
| | | | | | | | | | | | | | | | | | arc-2016.09 is the most recent toolchain for ARC cores and it is based on top of upstream Binutils 2.27 and GCC 6.2.1. With updated major version of GCC we copied all GCC 6.x patches for ARC as well as Bintils 2.27 patches. Note that toochain sports ARCv4 ABI and so must be used with 4.8+ Linux kernels. Even though it will build v4.4 kernel perfectly fine on attempt to run user-space apps they won't work with older kernel. That said previuosly sent RFC patches with Linux kernel update are required: [1] https://patchwork.ozlabs.org/patch/726686/ [2] https://patchwork.ozlabs.org/patch/726687/ Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
* linux-4.9: Fix building of DWC3 moduleAlexey Brodkin2017-05-021-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DWC3 driver uses of_usb_get_phy_mode() which is implemented in drivers/usb/phy/of.c and in bare minimal configuration it might not be pulled in kernel binary. In case of ARC or ARM this could be easily reproduced with "allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m. On building all ends-up with: ---------------------->8------------------ Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 5 modules ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 ---------------------->8------------------ This was affecting Lede in case of CONFIG_ALL_KMODS=y. The patch is already scheduled for v4.12 and once it is backported to 4.9.y it must be removed from here. Note this patch makes sense not only for ARC instead it fixes a generic issue which may affect more arches and platforms thus putting it in "generic/" folder. Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [patch rename]
* perf: disable build for ARC, it is currently brokenFelix Fietkau2017-05-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target: mpc85xx: make kernel_menuconfigAlexandru Ardelean2017-05-021-14/+33
| | | | | | | It's the best method I know (so far) to refresh the kernel config to a default state. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* target: mpc85xx: tl_wdr4900_v1: drop 'fsl_rstcr_restart' hookAlexandru Ardelean2017-05-021-1/+0
| | | | | | | | | | | | Since commit: http://github.com/torvalds/linux/commit/7120438e5d82f445acbfe131a1b58eab7e83fa33 Seems that fsl_rstcr_restart() has been converted to a reset handler and dropped as hook/callback. Apply the same to the `tl_wdr4900_v1` target. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* target: mpc85xx: refresh kernel patchesAlexandru Ardelean2017-05-023-136/+9
| | | | | | | | | | | | | Re-applied patches: 001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch 100-powerpc-85xx-tl-wdr4900-v1-support.patch Dropped patch: 200-spi-fsl-espi-preallocate-local-buffer.patch now part of kernel upstream hash https://github.com/torvalds/linux/commit/1423877b73ed5f4982eaba8bed359605b9918a2b Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* target: mpc85xx: switch to kernel 4.9Alexandru Ardelean2017-05-025-1/+1
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* build: remove absolute path to perl and replace with /usr/bin/env perlBastian Köcher2017-05-024-4/+7
| | | | Signed-off-by: Bastian Köcher <git@kchr.de>
* kernel: allow selecting RTC drivers on targets without explicit RTC supportFelix Fietkau2017-05-022-9/+17
| | | | | | Keep them disabled by default to avoid pulling in extra kernel bloat Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-omap: rename patch to 101-disable-thumb-omap3.patchAlexander Couzens2017-04-301-0/+0
| | | | | | It's disabling thumb for the whole omap3 family. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 16:08:58 +0000