aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* realtek: refactor the Netgear GS110TPP v1 device treeMichael Mohr2021-02-122-225/+139
| | | | | | | | | | | | | | | | | | | Move most of the GS110TPP v1 device tree into a dtsi so that it can be shared with the GS108T v3. Additionally: * Use macros to simplify the ethernet and switch definitions * Zero-pad the offsets and sizes in the partition map to 8 digits each The spi-max-frequency value has been changed from 10MHz to 50MHz based on an analysis of the relevant datasheets. The current driver doesn't use this property, as the clock speed is fixed. However, it's required for this type of DT node, so that's why it's present here. The firmware partition has been split in half, since this is how the stock firmware uses it. This can be used to easily revert to a stock firmware if one is written to the second image area. Signed-off-by: Michael Mohr <akihana@gmail.com>
* realtek: add and use netgear_nge for the GS110PP v1Michael Mohr2021-02-121-6/+12
| | | | | | | | The netgear_nge device will be shared between the GS108T v3 (to be added in a later commit) and the GS110PP v1. It also enables LZMA compression for the ramdisk image. Signed-off-by: Michael Mohr <akihana@gmail.com>
* hostapd: reconfigure wps credentials on reloadRaphaël Mélotte2021-02-121-0/+187
| | | | | | | | | | This patch fixes a bug that prevents updating Multi-AP credentials after hostapd has started. It was sent to upstream hostapd here: https://patchwork.ozlabs.org/bundle/rmelotte/hostapd:%20update%20WPS%20credentials%20on%20SIGHUP/ Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
* hostapd: add notifications for management framesRaphaël Mélotte2021-02-122-2/+131
| | | | | | | | | | | | | | | | This patch allows other applications to get events management frames (for example: association requests). This is useful in Multi-AP context to be able to save association requests from stations. It has been sent to upstream hostapd in this series: https://patchwork.ozlabs.org/project/hostap/list/?series=217500 '700-wifi-reload.patch' is updated due to the introduction of '110-notify-mgmt-frames.patch'. Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
* ltq-ptm: Update VR9 PTM firmwareAntti Seppälä2021-02-128-312/+439
| | | | | | | | | | | | | | | After looking at various vendor GPL source code dumps I discovered that some of them contain updated versions of ltq-ptm driver when compared to what openwrt has. The driver update is mostly cursory (simple changes to comments, whitespace, formatting etc.) or adds debug features not used by openwrt. However the updated driver also contains a later version of PTM firmware which is extracted and included in this commit along with bits to correctly identify its version when driver loads. Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
* ath79: fix USB power GPIO for TP-Link TL-WR810N v1Adrian Schmutzler2021-02-111-1/+1
| | | | | | | | | | | | | | | | | | The TP-Link TL-WR810N v1 is known to cause soft-brick on ath79 and work fine for ar71xx [1]. On closer inspection, the only apparent difference is the GPIO used for the USB regulator, which deviates between the two targets. This applies the value from ar71xx to ath79. Tested successfully by a forum user. [1] https://forum.openwrt.org/t/tp-link-tl-wr810n-v1-ath79/48267 Fixes: cdbf2de77768 ("ath79: Add support for TP-Link WR810N") Fixes: FS#3522 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for ELECOM WRC-1167FSINAGAKI Hiroshi2021-02-114-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WRC-1167FS is a 2.4/5 GHz band 11ac (WiFi-5) router, based on MT7628AN. Specification: - SoC : MediaTek MT7628AN - RAM : DDR2 64 MiB (NT5TU32M16FG-AC) - Flash : SPI-NOR 16 MiB (W25Q128JVSIQ) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : MediaTek MT7628AN (SoC) - 5 GHz : MediaTek MT7612E - Ethernet : 10/100 Mbps x2 - Switch : MT7628AN (SoC) - LEDs/Keys : 6x, 3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: 3.3V, GND, TX, RX from "J1" marking - 57600n8 - Power : 12 VDC, 1 A Flash instruction using factory image: 1. Boot WRC-1167FS normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button to perform firmware update 4. Wait ~120 seconds to complete flashing Notes: - Last 0x800000 (8 MiB) in SPI-NOR flash is not used on stock firmware - Additional padding in factory image is required to avoid incomplete flashing on stock firmware MAC addresses: - LAN : BC:5C:4C:xx:xx:68 (Config, ethaddr (text) / Factory, 0x28 (hex)) - WAN : BC:5C:4C:xx:xx:69 (Config, wanaddr (text) / Factory, 0x22 (hex)) - 2.4GHz: BC:5C:4C:xx:xx:6A (Config, rmac (text) / Factory, 0x4 (hex)) - 5GHz : BC:5C:4C:xx:xx:6B (Config, rmac2 (text) / Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: bump 5.4 to 5.4.97John Audia2021-02-1116-35/+26
| | | | | | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased: bcm27xx 950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm53xx 180-usb-xhci-add-support-for-performing-fake-doorbell.patch layerscape 302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch 820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch 820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch Build system: x86_64 Build-tested: bcm27xx/bcm2711, ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions/everything functional. Signed-off-by: John Audia <graysky@archlinux.us> [remove quilt comment, fix/adjust 820-usb-* layerscape patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* arm-trusted-firmware-tools: add patch to pass LDFLAGSDaniel Golle2021-02-101-0/+11
| | | | | | This should hopefully fix builds on the buildbot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* at91: use SPDX license identifiers on DTS filesAdrian Schmutzler2021-02-105-10/+10
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: use SPDX license identifiers on scriptsAdrian Schmutzler2021-02-1014-69/+14
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: use SPDX license identifiers on MakefilesAdrian Schmutzler2021-02-10139-555/+203
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm4908: update Ethernet driverRafał Miłecki2021-02-104-178/+179
| | | | | | Use the latest version sent upsteram. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* arm-trusted-firmware-mediatek: mark @BROKEN until bromimage gets fixedDaniel Golle2021-02-101-1/+3
| | | | | | | | | | The 'bromimage' tool which is used to wrap bl2 with a MediaTek-specific header is distributed in binary form only and unfortunately tries to dynamically link against libopenssl, which fails on the buildbots. Wait for MTK to provide a at least static executable instead, in the meantime, mark the package as broken. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-tools: fix passing of CFLAGSDaniel Golle2021-02-101-3/+2
| | | | | | | | HOST_CFLAGS were ignored as they were passed on incorrectly which lead to build failure if OpenSSL wasn't present on the build host. Fix that by properly passing HOST_CFLAGS when building each tool. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wolfssl: Backport fix for CVE-2021-3336Hauke Mehrtens2021-02-092-1/+54
| | | | | | | | | | | | This should fix CVE-2021-3336: DoTls13CertificateVerify in tls13.c in wolfSSL through 4.6.0 does not cease processing for certain anomalous peer behavior (sending an ED22519, ED448, ECC, or RSA signature without the corresponding certificate). The patch is backported from the upstream wolfssl development branch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-tools: remove tools which require libopensslDaniel Golle2021-02-091-12/+0
| | | | | | They are anyway not used for now, so only build fiptool and sptool. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* glibc: update to 2.33Curtis Deptuck2021-02-091-3/+3
| | | | | | | | | | ChangeLog: https://sourceware.org/pipermail/libc-alpha/2021-February/122207.html Refresh patch: None required Signed-off-by: Curtis Deptuck <curtdept@me.com>
* ramips: add support for Cudy WR1300Andrew Pikler2021-02-092-0/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: - SoC: MediaTek MT7621AT - RAM: 128 MB (DDR3) - Flash: 16 MB (SPI NOR) - WiFi: MediaTek MT7603E, MediaTek MT7612E - Switch: 1 WAN, 4 LAN (Gigabit) - Ports: 1 USB 3.0 - Buttons: Reset, WPS - LEDs: Power, System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS, USB - Power: DC 12V 1A tip positive UART Serial: 115200 baud Located on unpopulated 4 pin header near J4: J4 [o] Rx [o] Tx [o] GND [ ] Vcc - Do not connect Installation: Download and flash the manufacturer's built OpenWRT image available at http://www.cudytech.com/openwrt_software_download Install the new OpenWRT image via luci (System -> Backup/Flash firmware) Be sure to NOT keep settings. The force upgrade may need to be checked due to differences in router naming conventions. Recovery: - Loads only signed manufacture firmware due to bootloader RSA verification - serve tftp-recovery image as /recovery.bin on 192.168.1.88/24 - connect to any lan ethernet port - power on the device while holding the reset button - wait at least 8 seconds before releasing reset button for image to download - See http://www.cudytech.com/newsinfo/547425.html MAC addresses as verified by OEM firmware: use address source LAN *:f0 label WAN *:f1 label + 1 2g *:f0 label 5g *:f2 label + 2 The label MAC address is found in bdinfo 0xde00. Signed-off-by: Andrew Pikler <andrew.pikler@gmail.com>
* ath79: add support for D-Link DAP-3662 A1Sebastian Schaper2021-02-097-5/+128
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * QCA9557, 16 MiB Flash, 128 MiB RAM, 802.11n 2T2R * QCA9882, 802.11ac 2T2R * 2x Gigabit LAN (1x 802.11af PoE) * IP68 pole-mountable outdoor case Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Both ethernet ports are set to LAN by default, matching the labelling on the case. However, since both GMAC Interfaces eth0 and eth1 are connected to the switch (QCA8337), the user may create an additional 'wan' interface as desired and override the vlan id settings to map br-lan / wan to either the PoE or non-PoE port, depending on the individual scenario of use. So, the LAN and WAN ports would then be connected to different GMACs, e.g. config interface 'lan' option ifname 'eth0.1' ... config interface 'wan' option ifname 'eth1.2' ... config switch_vlan option device 'switch0' option vlan '1' option ports '1 0t' config switch_vlan option device 'switch0' option vlan '2' option ports '2 6t' Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> [add configuration example] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for JCG Y2Chukun Pan2021-02-094-7/+152
| | | | | | | | | | | | | | | | | | | | | | | | JCG Y2 is an AC1300M router Hardware specs: SoC: MediaTek MT7621AT Flash: Winbond W25Q128JVSQ 16MiB RAM: Nanya NT5CB128M16 256MiB WLAN: 2.4/5 GHz 2T2R (1x MediaTek MT7615) Ethernet: 10/100/1000 Mbps x5 LED: POWER, INTERNET, 2.4G, 5G Button: Reset Power: DC 12V,1A Flash instructions: Upload factory.bin in stock firmware's upgrade page. MAC addresses map: 0x0004 *:c8 wlan2g/wlan5g/label 0xe000 *:c7 lan 0xe006 *:c6 wan Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uboot-envtools: Update to version 2021.01Hauke Mehrtens2021-02-081-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: mkimage: Update U-Boot to version 2021.01Hauke Mehrtens2021-02-086-60/+13
| | | | | | | | | | | | * The fit image is now created with 0666 permission in upstream U-Boot remove our patch switch creates it with 0744 * The generated/autoconf.h file is created now as an empty file, it is not needed to remove this include any more. * Upstream lib/rsa/rsa-sign.c now includes stdlib.h instead of malloc.h * ALIGN_MASK was moved to imagetool.h, own patch should not be needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-dsl-base: remove usused lantiq_dsl.shAndre Heider2021-02-082-750/+1
| | | | | | | All users have been converted to ubus. Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Martin Schiller <ms@dev.tdt.de>
* ltq-adsl-app: use ubus to provide metricsAndre Heider2021-02-082-4/+5
| | | | | | | | luci now uses ubus directly, so remove 'lucistat'. For manual usage just print the ubus output, use luci for a pretty version. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-vdsl-app: use ubus to provide metricsAndre Heider2021-02-082-4/+5
| | | | | | | | | luci now uses ubus directly, so remove 'lucistat'. For manual usage just print the ubus output, use luci for a pretty version. Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Martin Schiller <ms@dev.tdt.de>
* ltq-adsl-app: add ubus support to get metricsAndre Heider2021-02-082-1/+56
| | | | | | As with ltq-vdsl-app, see previous commit. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-vdsl-app: add ubus support to get metricsAndre Heider2021-02-083-1/+859
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a 'dsl' ubus object with a 'metrics' function to replace the expensive shell parsing done by /etc/init.d/dsl_control [dsl|luci]stat. All metrics are gathered by using syscalls. An additional thread is started to handle ubus events. $ time /etc/init.d/dsl_control dslstat real 0m 2.66s user 0m 0.90s sys 0m 1.76s $ time ubus call dsl metrics real 0m 0.02s user 0m 0.00s sys 0m 0.01s Example output: { "api_version": "4.17.18.6", "firmware_version": "5.8.1.5.0.7", "chipset": "Lantiq-VRX200", "driver_version": "1.5.17.6", "state": "Showtime with TC-Layer sync", "up": true, "uptime": 3891, "atu_c": { "vendor_id": [ 181, 0, 66, 68, 67, 77, 178, 26 ], "vendor": "Broadcom 178.26", "system_vendor_id": [ 181, 0, 66, 68, 67, 77, 0, 0 ], "system_vendor": "Broadcom", "version": [ 49, 57, 46, 48, 46, 51, 53, 46, 50, 32, 86, 69, 95, 49, 49, 95 ], "serial": [ 65, 65, 49, 52, 52, 54, 70, 69, 48, 90, 87, 45, 48, 56, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ] }, "power_state": "L0 - Synchronized", "xtse": [ 0, 0, 0, 0, 0, 0, 0, 2 ], "annex": "B", "standard": "G.993.2", "profile": "17a", "mode": "G.993.2 (VDSL2, Profile 17a, with down- and upstream vectoring)", "upstream": { "vector": true, "trellis": true, "bitswap": true, "retx": true, "virtual_noise": false, "interleave_delay": 0, "data_rate": 31999000, "latn": 8.500000, "satn": 8.400000, "snr": 12.700000, "actps": -90.100000, "actatp": 13.400000, "attndr": 37180000 }, "downstream": { "vector": true, "trellis": true, "bitswap": true, "retx": true, "virtual_noise": false, "interleave_delay": 140, "data_rate": 89998000, "latn": 9.500000, "satn": 9.600000, "snr": 13.300000, "actps": -90.100000, "actatp": -1.600000, "attndr": 116315372 }, "errors": { "near": { "es": 1, "ses": 0, "loss": 3, "uas": 424, "lofs": 0, "fecs": 0, "hec": 0, "ibe": 0, "crc_p": 0, "crcp_p": 0, "cv_p": 0, "cvp_p": 0, "rx_corrupted": 27740, "rx_uncorrected_protected": 27010, "rx_retransmitted": 0, "rx_corrected": 730, "tx_retransmitted": 16222 }, "far": { "es": 242, "ses": 71, "loss": 0, "uas": 424, "lofs": 0, "fecs": 22687, "hec": 0, "ibe": 0, "crc_p": 0, "crcp_p": 0, "cv_p": 0, "cvp_p": 0, "rx_corrupted": 1383552, "rx_uncorrected_protected": 1220215, "rx_retransmitted": 0, "rx_corrected": 163337, "tx_retransmitted": 1574051 } } } Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Martin Schiller <ms@dev.tdt.de>
* ltq-vdsl-app: shutdown upon sigtermAndre Heider2021-02-082-2/+19
| | | | | | | | | | procd sends sigterm to stop daemons, hook it up. This speeds up the shutdown sequence and gets rid of the following message: daemon.info procd: Instance dsl_control::instance1 pid 15408 not stopped on SIGTERM, sending SIGKILL instead Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Martin Schiller <ms@dev.tdt.de>
* ath79: use internal switch for EAP300 v2Michael Pratt2021-02-083-21/+5
| | | | | | | | | | | | | | | | Have the port use GMAC1 with internal switch which fixes the issue of the ethernet LED not functioning The LED is triggered by the internal switch, not a GPIO. The GPIO for the ethernet LED was added in ath79 as it was defined in the ar71xx target but it was not functioning in ath79 for a previously unknown reason. It is unknown why that GPIO was defined as an LED in ar71xx. Signed-off-by: Michael Pratt <mcpratt@pm.me> [drop unrelated changes: model property and SPI max frequency] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: make all eth ports LAN for Engenius APsMichael Pratt2021-02-082-5/+4
| | | | | | | | | | | | | | | | | | for: - ENH202 v1 - ENS202EXT v1 - EnstationAC v1 - EWS511AP For EWS511AP, have default behavior as static ip to match the behavior of all other APs in ath79 These boards are sold as Client Bridge or Point to Point or Access Point so there is probably no benefit to have WAN by default for one of the ports, to prevent user confusion. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* kernel: bump 5.4 to 5.4.96John Audia2021-02-084-7/+7
| | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 Run-tested [*]: ramips/mt7621 (R6800, DIR-878 A1, EAP235-Wall) Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* dnsmasq: Bump to v2.84Kevin Darbyshire-Bryant2021-02-083-3/+76
| | | | | | | | | | dnsmasq v2.84rc2 has been promoted to release. No functional difference between v2.83test3 and v2.84/v2.84rc2 Backport 2 patches to fix the version reporting Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* bcm4908: add board.d network setupRafał Miłecki2021-02-081-0/+26
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: add Ethernet driverRafał Miłecki2021-02-085-0/+1020
| | | | | | This commit picks up pending netdev patches. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dnsmasq: switch to ubus-based hotplug callDaniel Golle2021-02-085-39/+46
| | | | | | | | Use new ubus-based hotplug call in dhcp-script.sh As sysntpd now makes use of the new ubus-based hotplug calls, dnsmasq no longer needs to ship ACL to cover ntpd-hotplug. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* busybox: sysntpd: make use of new ubus hotplug.ntp objectDaniel Golle2021-02-084-4/+28
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: add hotplug-call dispatcher ubus objectsDaniel Golle2021-02-081-3/+3
| | | | | | Add per-subsystem ubus objects exposing hotplug-call. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* acx-mac80211: replace dead URLs with OpenWrt CDNIlya Lipnitskiy2021-02-071-9/+9
| | | | | | | | erley.org no longer exists; attempting to connect to it during package download results in lengthy timeouts. Use the new OpenWrt CDN alias to download from reliable OpenWrt mirrors. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* ramips: disable default build for HooToo HT-TM02Szabolcs Hubai2021-02-071-0/+1
| | | | | | | | | | | | | | | | | | While the latest version of 19.07 release is usable, the current master is unbootable on the device in a normal way. "Normal way" installations includes: - sysupgrade (e.g. from 19.07) - RESET button recovery with Ron Curry's (Wingspinner) UBoot image (10.10.10.3 + "Kernal.bin") - RESET button recovery with original U-Boot (10.10.10.254 + "kernel") One could flash and boot the latest master sysupgrade image successfully with serial access to the device. But a sysupgrade from this state still breaks the U-Boot and soft-bricks the device. Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* ramips: mt7621: use preferred logic in lib/upgrade/iodata.shAdrian Schmutzler2021-02-071-3/+3
| | | | | | | shellcheck recommends || and && over "-a" and "-o" because the latter are not well defined. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for I-O DATA WN-DX1200GRINAGAKI Hiroshi2021-02-074-4/+222
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I-O DATA WN-DX1200GR is a 2.4/5 GHz band 11ac (WiFi-5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : raw NAND 128 MiB - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : MediaTek MT7603E - 5 GHz : MediaTek MT7613BE - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LEDs/keys : 2x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J5: 3.3V, TX, RX, NC, GND from triangle-mark - 57600n8 - Power : 12 VDC, 1 A Flash instruction using initramfs image: 1. Boot WN-DX1200GR normally 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt initramfs image and click update ("更新") button to perform firmware update 4. On the initramfs image, perform sysupgrade with the squashfs-sysupgrade image 5. Wait ~120 seconds to complete flashing Notes: - currently, mt7615e driver in mt76 doesn't fully support MT7613 (MT7663) wifi chip - the eeprom data in flash is not used by mt7615e driver and the driver reports the tx-power up to 3dBm - the correct MAC address for MT7613BE in eeprom data cannot be assigned to the phy - last 0x80000 (512 KiB) in NAND flash is not used on stock firmware - stock firmware requires "customized uImage header" (called as "combo image") by MSTC (MitraStar Technology Corp.), but U-Boot doesn't - uImage magic ( 0x0 - 0x3 ) : 0x434F4D43 ("COMC") - header crc32 ( 0x4 - 0x7 ) : with "data length" and "data crc32" - image name (0x20 - 0x37) : model ID and firmware versions - data length (0x38 - 0x3b) : kernel + rootfs - data crc32 (0x3c - 0x3f) : kernel + rootfs MAC addresses: LAN: 50:41:B9:xx:xx:08 (Ubootenv, ethaddr (text) / Factory, 0x1E000 (hex)) WAN: 50:41:B9:xx:xx:0A (Factory, 0x1E006 (hex)) 2.4GHz: 50:41:B9:xx:xx:08 (Factory, 0x4 (hex)) 5GHz: 50:41:B9:xx:xx:09 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [add check whether dflag_offset is set] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: kernel: reenable the TRNGDaniel González Cabanelas2021-02-071-53/+2
| | | | | | | | | | | The hardware random number generator driver for bcm63xx was merged with the one used by the Raspberry Pi. Now this driver is lost. Reenable the HW_RANDOM kernel config with the new driver. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> [refresh kernel config] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mpc85xx: refresh kernel configPawel Dembicki2021-02-061-68/+16
| | | | | | Simple "make kernel_oldconfig" was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* treewide: unify OpenWrt hosted source via @OPENWRTPaul Spooren2021-02-0516-17/+19
| | | | | | | | | | | Multiple sources are hosted on OpenWrts source server only. The source URLs to point to the server vary based on different epochs in OpenWrts history. Replace all by @OPENWRT which is an "empty" mirror, therefore using the fallback servers sources.cdn.openwrt.org and sources.openwrt.org. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kirkwood: use 3 temperature sensors for Zyxel NSA310BThomas Beckler2021-02-051-4/+16
| | | | | | | | | | | | | | | | | | | | Instead of taking the input of one temperature sensor (temp1), the script takes into account three temperature sensors to control the PWM of the cooling fan. temp1 -> placed on main board temp2 -> placed on main board temp3 -> placed on or close to chipset All three temperatures give valid input for the PWM of the fan on NSA310 and are actually changing. Tested on two NSA310. Signed-off-by: Thomas Beckler <thomas.beckler@hotmail.com> Reviewed-by: Alberto Bursi <bobafetthotmail@gmail.com> [commit title/message facelift, code cleanup] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tplink-safeloader: add support for TP-Link Archer A7 v5 (RU)Alexey Kunitskiy2021-02-051-1/+2
| | | | | | | | | | | | | | | | | | | Although provided in separate zip archives, the firmwares for EU and RU version are byte-identical. This adds the missing ID compared to the support-list in the vendor firmware. Note (since I checked it anyway): Partitions and support list are unchanged for all three existing firmware versions: * 20200721-rel40773 * 20201029-rel43238 * 20201120-rel50399 Signed-off-by: Alexey Kunitskiy <alexey.kv@gmail.com> [rewrite commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: wrap ucidef_add_switch in 02_networkAdrian Schmutzler2021-02-051-1/+2
| | | | | | Wrap line to be consistent with all other definitions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: move elx-header into image-commands.mkYanase Yuki2021-02-052-20/+20
| | | | | | | ELECOM WAB-I1750-PS will need this in ath79, so move it to common Makefile. Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
* kirkwood: refresh kernel configSungbo Eo2021-02-051-63/+2
| | | | | | Refresh config with make kernel_oldconfig. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 12:15:01 +0000