aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* igmpproxy: run in foreground for procdKevin Darbyshire-Bryant2018-07-182-2/+2
| | | | | | | | | | procd needs processes to stay in foreground to remain under its gaze and control. Failure to do so means service stop commands fail to actually stop the process (procd doesn't think it's running 'cos the process has exited already as part of its forking routing) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 9d5a2469304eb23b6d09432a6d9b6a57d0019d2a)
* mediatek: fix parallel build issues in image build codeJo-Philipp Wich2018-07-171-10/+4
| | | | | | | | | | Drop the parallel-unsafe custom Build/dtb macro and use the .dtb artifacts produced by the generic image build code. Also remove unused .dtb references in the mt7623 subtarget. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commit 8194f9ef4a5ab4587e8f6cf1aec96ba89c5766fd)
* mtd: improve check for TRX header being already fixedRafał Miłecki2018-07-162-8/+9
| | | | | | | | | | | | First of all lengths should be compared after checking all blocks for being good/bad. It's because requested length may differ from a final one if there were some bad blocks. Secondly it makes sense to also compare crc32 since we already have a new one calculated. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 82498a7f7aa86ad0e93ef60d50dccaa0a9549e4c)
* mtd: support bad blocks within the mtd_fixtrx()Rafał Miłecki2018-07-162-7/+29
| | | | | | | | | | | | | | | | | Reading MTD data with (p)read doesn't return any error when accessing bad block. As the result, with current code, CRC32 covers "data" stored in bad blocks. That behavior doesn't match CFE's one (bootloader simply skips bad blocks) and may result in: 1) Invalid CRC32 2) CFE refusing to boot firmware with a following error: Boot program checksum is invalid Fix that problem by checking every block before reading its content. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0f54489f754e7bd34e0430c57a11b6a54740d58e)
* kmod-sched-cake: bump to 20180716Kevin Darbyshire-Bryant2018-07-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bump to the latest cake recipe. This backports tc class support to kernel 4.9 and other than conditional kernel compilation pre-processor macros represents the cake that has gone upstream into kernel 4.19. Loud cheer! Fun may be had by changing cake tin classification for packets on ingress. e.g. tc filter add dev ifb4eth0 parent 800b: protocol ip u32 match \ ip dport 6981 0xffff action skbedit priority 800b:1 Where 800b: represents the filter handle for the ifb obtained by 'tc qdisc' and the 1 from 800b:1 represents the cake tin number. So the above example puts all incoming packets destined for port 6981 into the BULK (lowest priority) tin. f39ab9a Obey tin_order for tc filter classifiers 1e2473f Clean up after latest backport. 82531d0 Reorder includes to fix out of tree compilation 52cbc00 Code style cleanup 6cdb496 Fix argument order for NL_SET_ERR_MSG_ATTR() cab17b6 Remove duplicate call to qdisc_watchdog_init() 71c7991 Merge branch 'backport-classful' 32aa7fb Fix compilation on Linux 4.9 9f8fe7a Fix compilation on Linux 4.14 ceab7a3 Rework filter classification aad5436 Fixed version of class stats be1c549 Add cake-specific class stats 483399d Use tin_order for class dumps 80dc129 Add class dumping 0c8e6c1 Fix dropping when using filters c220493 Add the minimum class ops 5ed54d2 Start implementing tc filter/class support Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit c729c43b391e759b6700b28c8e02ba93fe15f8c2)
* qos-scripts: fix uci callback handlingTony Ambardar2018-07-163-29/+29
| | | | | | | | | | | | | | | | | The previous callback code was fragile, dependent on some UCI callback bugs and side-effects now fixed in master commit 73d8a6ab. Update scripts to use callbacks where appropriate and necessary, while using normal UCI config parsing for all else. This results in smaller, simpler, more robust code. Use callbacks in generate.sh to only process 'interface' defaults and the varying entries for 'reclassify', 'default' and 'classify' sections. Also switch qos-stat to use non-callback UCI handling. The current changes work independently of 73d8a6ab (i.e. both before and after), and are consistent with UCI config parsing documentation. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* base-files: fix UCI config parsing and callback handlingTony Ambardar2018-07-162-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several long-standing issues present in the UCI shell API as documented in https://wiki.openwrt.org/doc/devel/config-scripting. They relate both to high-level, user-defined callback functions used to process UCI config files, and also to low-level functions used within scripts generally. The related problems have been encountered now and in the past, e.g. https://forum.openwrt.org/viewtopic.php?id=54295, and include: a) UCI parsing option() function and user-defined option_cb() callbacks being erroneously called during processing of "list" config file entries; b) normal usage of the low-level config_set() unexpectedy calling any defined option_cb() if present; and c) handling of the list_cb() not respecting the NO_CALLBACK variable. Root causes include a function stack "inversion", where the low-level config_set() function incorrectly calls the high-level option() function, intended only for processing the "option" keyword of UCI config files. This change addresses the inversion and other issues, making the option handling code more consistent and smaller, and simplifying developers' usage of UCI callbacks. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* apm821xx: fix usb-otg on 4.14Christian Lamparter2018-07-161-1/+1
| | | | | | | | Starting with 4.14, the "amcc,dwc-otg" needs to be used in order to get the usb-otg to work. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 12b80f1cabf0a7995637fc9b0831b3e9f881f9e6)
* odhcp6c: add noserverunicast config option for broken DHCPv6 serversHans Dedecker2018-07-152-6/+9
| | | | | | | | | | | Fix broken DHCPv6 servers which provide the server unicast option but do not reply on DHCPv6 renew messages directed to the IPv6 address contained in the server unicast option which results in broken IPv6 connectivity. 67ae6a7 odhcp6c: add option to ignore Server Unicast option Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: update to latest git HEADHans Dedecker2018-07-151-4/+4
| | | | | | b99c1f6 odhcp6c: remove len check in option parsing handle Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: user string option supportHans Dedecker2018-07-151-3/+3
| | | | | | ca8822b odhcp6c: add support for user string options Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ipq40xx: add get_status_led to diag.shDavid Bauer2018-07-151-0/+4
| | | | | | | | | | | | This commit adds the get_status_led method to diag.sh, which sets the boot-led as status-led for scripts using this method to get a status-led. This method is used platform-independent in downstream project gluon to set the LED used to indicate the config-mode. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 4fc005197a320ff728544eba8028f7a9f23e1868)
* OpenWrt v18.06.0-rc2: revert to branch defaultsJo-Philipp Wich2018-07-155-11/+9
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* OpenWrt v18.06.0-rc2: adjust config defaultsv18.06.0-rc2Jo-Philipp Wich2018-07-155-9/+11
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uhttpd: update to latest Git headJo-Philipp Wich2018-07-151-3/+3
| | | | | | | | | | | db86175 lua: honour size argument in recv() function d3b9560 utils: add uh_htmlescape() helper 8109b95 file: escape strings in HTML output 393b59e proc: expose HTTP Origin header in process environment 796d42b client: flush buffered SSL output when tearing down client ustream Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit b54bef205846e2b30da23c1316c4a9b941c5078d)
* include/prereq-build.mk: explicitly check for -f flag when using busybox timeMatthias Schiffer2018-07-141-2/+2
| | | | | | | | On Debian, busybox does have a time applet, but it does not support the -f flag. Catch this in prereq check to give users to proper error message. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit b123921a92a957f08abb186e041aa38aa9328f3e)
* include/kernel-build.mk: fix kernel rebuild on backport patch changesMatthias Schiffer2018-07-141-1/+1
| | | | | | | | | An incorrect variable name was referenced in KERNEL_FILE_DEPENDS, leading to the omission of the backport-* patch dirs in the generation of the prepared stamp name. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 36fa1bbf6f510e57098edab3932015dc747bbd49)
* kernel: backport page fragment API changes from 4.10+ to 4.9Felix Fietkau2018-07-143-0/+291
| | | | | | mt76 now relies on this API Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: gen_stats: Fix netlink stats dumping in the presence of paddingKevin Darbyshire-Bryant2018-07-132-0/+98
| | | | | | | | | | | | | | | | | | | | | | | | | Backport hot off the press upstream netlink patch. Fixes stats display from CAKE qdisc on MIPS allowing us to bump CAKE to latest version. The gen_stats facility will add a header for the toplevel nlattr of type TCA_STATS2 that contains all stats added by qdisc callbacks. A reference to this header is stored in the gnet_dump struct, and when all the per-qdisc callbacks have finished adding their stats, the length of the containing header will be adjusted to the right value. However, on architectures that need padding (i.e., that don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added before the stats, which means that the stored pointer will point to the padding, and so when the header is fixed up, the result is just a very big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS struct, this problem has been mostly invisible, but we exposed it with the netlink attribute-based statistics in CAKE. Fix the issue by fixing up the stored pointer if it points to a padding nlattr. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 3698b34a00d623f87a41179e656b8e89d0bb7267)
* ramips: clean up and fix MT7621 NAND driver issuesFelix Fietkau2018-07-131-74/+25
| | | | | | | | | | | | - remove misaligned custom buffer allocation in the NAND driver - remove broken bounce buffer implementation for 16-byte align Let the MTD core take care of both Fixes messages like these: [ 102.820541] Data buffer not 16 bytes aligned: 87daf08c Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-07-131-3/+3
| | | | | | | | | 08719b1 mt76: use a per rx queue page fragment cache 4d2c565 mt76x2: reset HW before probe f622975 mt76x2: fix CCK protection control frame rate 6780375 mt76x2: add frame protection support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: ethernet: use own page_frag_cacheFelix Fietkau2018-07-132-3/+15
| | | | | | | | | | | | | | | | Using the NAPI or netdev frag cache along with other drivers can lead to 32 KiB pages being held for a long time, despite only being used for very few page fragment. This can happen if the ethernet driver grabs one or two fragments for rx ring refill, while other drivers use (and free up) the remaining fragments. The 32 KiB higher-order page can only be freed once all users have freed their fragments, which only happens after the rings of all drivers holding the fragments have wrapped around. Depending on the traffic patterns, this can waste a lot of memory and look a lot like a memory leak Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: ethernet: use skb_free_frag to free fragmentsFelix Fietkau2018-07-131-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include/feeds.mk: rework generation of opkg distfeeds.confMatthias Schiffer2018-07-124-24/+8
| | | | | | | | Allow enabling/commenting/disabling each feed individually by using a tristate config symbol. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 16035a7dd370671670693af9ae63368ee4dd731f)
* base-files: fix feed list in PKG_CONFIG_DEPENDSMatthias Schiffer2018-07-121-1/+1
| | | | | | | | FEEDS_ENABLED and FEEDS_DISABLED are derived from FEEDS_AVAILABLE, not FEEDS_INSTALLED. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 6dac434c0011524b9ac01725727faa1a19ea4a48)
* include/feeds.mk: always add available feeds to PACKAGE_SUBDIRSMatthias Schiffer2018-07-121-5/+1
| | | | | | | | | | | | | | | | Setting CONFIG_FEED_... symbols combined two different effects: Disabling a feed in the generated opkg distfeeds.conf, and omitting the feed from PACKAGE_SUBDIRS. It does not make sense to omit built feeds from PACKAGE_SUBDIRS, as it will only lead to packages that can be enabled in .config (and that will consequently be built) not to be found during rootfs creation, breaking the build. All feeds that packages are emitted to should simply always be added to PACKAGE_SUBDIRS instead; the CONFIG_FEED_... only configure the generated distfeeds.conf like this. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 9af22f1ac9122b54700dd38f627fdd446e1109f4)
* scripts/feeds: add src-dummy methodMatthias Schiffer2018-07-121-1/+6
| | | | | | | | | | The src-dummy method does not actually obtain any feed, but it can be used to insert addtional entries into the opkg distfeeds.conf. This is useful to make package feeds available to users without requiring the corresponding source feeds to be available during build. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 6bdd5d8459cca7ceb93c841cccf61dc7ce830092)
* ramips: TP-Link TL-WR902AC v3: add missing wps buttonPeter Lundkvist2018-07-121-1/+7
| | | | Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>
* ramips: TP-Link TL-WR902AC v3: don't build factory imagePeter Lundkvist2018-07-121-1/+0
| | | | | | | | | | | | | | | | | | | | | The line that produces factory image was accidentally left by me while testing before inital commit. I came to the conclusion that flashing from OEM firmware does not work (seems to share this behavior with other tplinks based on mt7628). I have not done any further analysis, as I was unable to open the case and attach a serial port (too much glue). Maybe i will try once more. So the way to do initial flashing (or un-bricking) is to use the tftp-recover image. It is possible to revert to OEM firmware with tftp recovery; in this case the first 512 bytes the image file need to be cut off. Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> [add explaination provided via mail as commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 4.14 to 4.14.54 for 18.06Koen Vandeputte2018-07-1228-285/+285
| | | | | | | | | | | | Refreshed all patches Reworked patches to match upstream: 335-v4.16-netfilter-nf_tables-add-single-table-list-for-all-fa.patch Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.111 for 18.06Koen Vandeputte2018-07-126-169/+191
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: Expose support for ath9k DynackKoen Vandeputte2018-07-121-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enables support for Dynack feature. When a remote station is far away, we need to compensate for the distance by allowing more time for an ACK to arrive back before issueing a retransmission. Currently, it needs to be set fixed to indicate the maximum distance the remote station will ever be. While this mostly works for static antennae, it introduces 2 issues: - If the actual distance is less, speed is reduced due to a lot of wates wait-time - If the distance becomes greater, retries start to occur and comms can get lost. Allowing to set it dynamically using dynack ensures the best possible tradeoff between speed vs distance. This feature is currently only supported in ath9k. it is also disabled by default. Enabling it can be done in 2 ways: - issue cmd: iw phy0 set distance auto - sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink Disabling it can be done by providing a valid fixed value. To give an idea of a practical example: In my usecase, we have mesh wifi device installed on ships/platforms. Currently, the coverage class is set at 12000m fixed. When a vessel moved closer (ex. 1500m), the measured link capacity was a lot lower compared to setting the coverage class fixed to 1500m Dynack completely solved this, nearly providing double the bandwidth at closer range compared to the fixed setting of 12000m being used. Also when a vessel sailed to a distance greater than the fixed setting, communication was lost as the ACK's never arrived within the max allowed timeframe. Actual distance: 6010m iperf 60s run avg Fixed 12150m: 31 Mbit/s Dynack: 58 Mbit/s Fixed 6300m: 51 Mbit/s Dynack: 59 Mbit/s Fixed 3000m: 13 Mbit/s (lots of retries) Dynack: 58 Mbit/s Actual distance: 1504m iperf 60s run avg Fixed 12150m: 31 Mbit/s Dynack: 86 Mbit/s Fixed 6300m: 55 Mbit/s Dynack: 87 Mbit/s Fixed 3000m: 67 Mbit/s Dynack: 87 Mbit/s Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bcm47xxpart: fix getting user-space data partition nameRafał Miłecki2018-07-102-2/+4
| | | | | | | | | | | | Partition name is picked by a parser_trx_data_part_name(). It has to get correct partition offset (taking care of bad blocks) to work properly. This fixes UBI support for devices that have kernel flashed on partition with a bad block. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7ddba08d873a0ce6d2d32b8f6a1bea550107ca44)
* mac80211: initialize sinfo in cfg80211_get_stationSven Eckelmann2018-07-081-0/+42
| | | | | | | | | | | | | | | | | | | | Most of the implementations behind cfg80211_get_station will not initialize sinfo to zero before manipulating it. For example, the member "filled", which indicates the filled in parts of this struct, is often only modified by enabling certain bits in the bitfield while keeping the remaining bits in their original state. A caller without a preinitialized sinfo.filled can then no longer decide which parts of sinfo were filled in by cfg80211_get_station (or actually the underlying implementations). cfg80211_get_station must therefore take care that sinfo is initialized to zero. Otherwise, the caller may tries to read information which was not filled in and which must therefore also be considered uninitialized. In batadv_v_elp_get_throughput's case, an invalid "random" expected throughput may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may switch to non-optimal neighbors for certain destinations. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> (cherry picked from commit 87493dac11f3c7bbbc1fed9aef1cf9ff62053ab0)
* ath10k-ct: search DT for BDF variant infoSven Eckelmann2018-07-083-1/+363
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> (cherry picked from commit 1c01e02575bd2af96741ba79ed12004fdfb15544)
* wireguard: bump to 0.0.20180625Kevin Darbyshire-Bryant2018-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | dfd9827 version: bump snapshot 88729f0 wg-quick: android: prevent outgoing handshake packets from being dropped 1bb9daf compat: more robust ktime backport 68441fb global: use fast boottime instead of normal boottime d0bd6dc global: use ktime boottime instead of jiffies 18822b8 tools: fix misspelling of strchrnul in comment 0f8718b manpages: eliminate whitespace at the end of the line 590c410 global: fix a few typos bb76804 simd: add missing header 7e88174 poly1305: give linker the correct constant data section size fd8dfd3 main: test poly1305 before chacha20poly1305 c754c59 receive: don't toggle bh Compile-tested-for: ath79 Archer C7 v2 Run-tested-on: ath79 Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 3ce11588f6346ebedde68ef30a06e01999e292bb)
* kmod-sched-cake: bump to latest 20180706Kevin Darbyshire-Bryant2018-07-071-3/+3
| | | | | | | | Fixes a potential infinite loop bug when in unlimited (ie not using built in shaper) mode. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 4bd4ece9eafbcde62d1e6efc4cf820f05906dd28)
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2018-07-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bumps to the latest & possibly greatest cake, sadly it's still inedible but from an SQM point of view quite tasty :-) Main tweaks since previous bump, improved ack_filter, some extra stats, support for 64bit netlink parameters (higher rates/byte counters) 0520a6c Fix NAT option handling 8da93e1 Make sure we always call qdisc_watchdog_init() in cake_init() f65daf6 Fix mismatched parenthesis 51d4ab3 Change flag handling to be safe even when mixing with non-eligible ACKs f2ea091 ack_filter: protect DCTCP with stricter filtering of ECE marks 28b4560 ACK filter: Handle wrapping sequence numbers and DSACKs 73f62d9 Use the right PAD attribute for options 5969c14 Use 32 for tin backlog e289f31 Move all the u64 netlink attributes together 36180a0 Check ACK seqno before parsing SACKs 91bbc01 Merge branch 'mine' into cobalt 58c55ec Rework SACK check to compare the ranges of two SACKs 9a5d593 ack_filter: Add proper handling of SACKs eca95d4 ack_filter: short-circuit TCP flag check d50a246 compat: backport some ktime functions 7b7ad11 compat: define tcpopt_fastopen for pre-4.1 kernels ca54cdb Fix ktime compare 9d7dcc0 ack filter: Parse TCP options and only drop safe ones b119882 Return EOPNOTSUPP on NAT option if conntrack is not available 842d7f0 Don't try to pad stats with tin_stats padding bd46dc2 Use 64-bit divide helper 8e41bf0 Make sure we never drop SACKs when filtering ACKs 66e5d60 Avoid comparing ktime_t to scalar values 7fab017 Actually commit the ktime_t changes fca6d13 Switch to ktime_t and get rid of cobalt.h 6f7e5af Can't use do_div with 64-bit divisors Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit abeae38dbbe8b7fda10ad36fb5db57ed16c93479)
* iproute2: tc: update support for cakeKevin Darbyshire-Bryant2018-07-071-28/+83
| | | | | | | | | | Bump iproute2/tc support of cake. Add support for cake's change to u64 attribute passing for certain attributes (rate & byte counts) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit a2165f936e94ed71dff5fdbf0fbc58c88fb17158)
* ipq806x: fix numbering for Netgear R7800 LAN portsAleksandr V. Piskunov2018-07-041-5/+5
| | | | | | | | | | Netgear R7800 switch LAN ports are numbered backwards in LuCI, i.e. numbering is not corresponding to the actual physical port labels, patch fixes that. Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> [merged with existing board using the same config] Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* lantiq: backport stp-xway get callback implementationMathias Kresin2018-07-032-0/+94
| | | | | | | | | | | To keep the status of a LED connected to the stp during boot, the get callback is required. If the callback is missing and the LED default state is set to keep in the devicetree, the gpio led driver errors out during load. Fixes: FS#1620 Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: fix target metadata scan dependenciesFelix Fietkau2018-07-033-4/+10
| | | | | | | Move SCAN_DEPS to scan.mk to eliminate redundancy with scripts/feeds Add image/*.mk to SCAN_DEPS for targets to pick up newly added devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: ensure that iwinfo is selected when building for multiple devicesFelix Fietkau2018-07-031-0/+1
| | | | | | | extra_packages needs to be added there, like on profiles and target packages lists Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: limit dictionary size for lzma compressionFelix Fietkau2018-07-031-1/+1
| | | | | | | | | | | | In some cases, recent builds fail to boot from flash with at least some MT7621 based devices. The error message is: "LZMA ERROR 1 - must RESET board to recover" Booting the same kernel via TFTP works for some reason. Through testing I figured out that limiting the LZMA dictionary size seems to prevent these errors Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.52 for 18.06Stijn Segers2018-07-02147-1694/+912
| | | | | | | Compile-tested on: ramips/mt7621, x86/64. Run-tested on: ramips/mt7621. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: bump 4.9 to 4.9.110 for 18.06Stijn Segers2018-07-026-201/+179
| | | | | | Compile-tested on ar71xx. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ramips: move mt7620n i2c_pins definition to right placeAndrey Jr. Melnikov2018-06-271-7/+7
| | | | | | | | | | Move to i2c pins pinmux node to the pinctrl node. Fixes: a0685deec458 ("ramips: Add i2c support for mt7620n") Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> [fix commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: remove "firmware" partition definition from netgear routersHannu Nyman2018-06-274-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the "firmware" partition definition from the DTS of R7800 to fix sysupgrade. Commit 4645a6d3 defined CONFIG_MTD_SPLIT_UIMAGE_FW=y for ipq806x and that causes mtd to misbehave as additional kernel and ubi partitions are detected from inside the "firmware" partition. [ 1.111324] 0x000001480000-0x000001880000 : "kernel" [ 1.121005] 0x000001880000-0x000007900000 : "ubi" [ 1.283912] 0x000007900000-0x000008000000 : "reserve" [ 1.296407] 0x000001480000-0x000007900000 : "firmware" [ 1.468043] no rootfs found after FIT image in "firmware" [ 2.426860] 2 uimage-fw partitions found on MTD device firmware [ 2.426931] 0x000001480000-0x000001880000 : "kernel" [ 2.440420] 0x000001880000-0x000007900000 : "ubi" Both kernel and ubi are already defined in DTS, so this duplication leads into errors in sysupgrade: Writing from <stdin> to kernel ... ubiattach: error!: strtoul: unable to parse the number '6 mtd10' ubiattach: error!: bad MTD device number: "6 mtd10" The partition is defined to same area as kernel+ubi, and is not needed for sysupgrade anymore. Remove it to fix things. Only tested for the R7800 but all of them should behave equal. Fixes: FS#1617 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> [squashed commits, add "tested on" note] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: Enlarge R7800 flash - use netgear partitionHannu Nyman2018-06-271-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Increase the available flash memory size in Netgear R7800 by taking into the use the unused "netgear" partition that is located after the firmware partition. Available flash space for kernel+rootfs+overlay increases by 68 MB from 32 MB to 100 MB. In a typical build, overlay space increases from 15 to 85, increasing the package installation possibilities greatly. Reverting to the OEM firmware is still possible, as the OEM firmware contains logic to initialise the "netgear" partition if its contents do not match expectations. In OEM firmware, "netgear" contains 6 UBI sub-partitions that are defined in /etc/netgear.cfg and initialisation is done by /etc/preinit Tested with Openwrt master r7093-4fdc6ca31b and OEM V1.0.2.52 Reference to forum discussion in Netgear R7800 exploration thread: https://forum.lede-project.org/t/netgear-r7800-exploration-ipq8065-qca9984/285/1118 (messages 1118-1158) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ramips: add switch port index for I-O DATA WN-GX300GRINAGAKI Hiroshi2018-06-271-2/+2
| | | | | | | | | | | WN-GX300GR has 5x RJ45 ports (port 0-4), and these ports are orderd on the device as follows: 4 3 2 1 0 1-4: lan 0: wan Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 19:37:25 +0000