aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: fix LibreRouter-v1 watchdog and poe_passSantiago Piccinini2022-10-021-0/+4
| | | | | | | Watchdog and poe_passthrough gpios require the jtag disabled. Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net> (cherry picked from commit 2ad949b11dbaa4c634868d55a4452d5a558776bd)
* build: fix warnings from grepChris Osgood2022-09-291-1/+1
| | | | | | | | | | Fixes build warnings when using newer versions of grep. Signed-off-by: Chris Osgood <chris_github@functionalfuture.com> Tested-by: Georgi Valkov <gvalkov@gmail.com> (cherry picked from commit c5e167e0d6075c46ca92c30b425c4dcb05fec5ed) [ fix conflict error ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* Makefile: fix stray \ warnings with grep-3.8Nick Hainke2022-09-291-1/+1
| | | | | | | | | | | | | | | | | | | We simply grep for "/usr". So no need for "-E" or "\/". Furthermore, in the new grep versions this creates warnings. As written in the grep-3.8 announcement: Regular expressions with stray backslashes now cause warnings, as their unspecified behavior can lead to unexpected results. For example, '\a' and 'a' are not always equivalent <https://bugs.gnu.org/39678>. Fixes warnings in the form of: grep: warning: stray \ before / Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit a29d3bc48c40c6a2a93ae1806bea2ac26455cdbb) [ fix conflict error ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* build: fix issues with targets installed via feedsFelix Fietkau2022-09-273-5/+6
| | | | | | | | - fix including modules.mk when a target is being replaced - fix calling make targets from target/linux Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 3a8825ad6acbf18b2b472ace56be58868af78be7)
* build: fix including modules.mk for targets pulled in from feedsFelix Fietkau2022-09-271-1/+2
| | | | | | Fixes: ebc36ebb2349 ("scripts/feeds: install targets to target/linux/feeds and support overriding") Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 00094efec33f07c9dc16cce23be492430c40b3cc)
* mpc85xx: add patch to fix gpio mpc8xxxJosef Schlehofer2022-09-241-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backports Linux kernel patch [1] for kernel 5.10 where it applies cleanly. This was tested on CZ.NIC Turris 1.1 router running OpenWrt 22.03 release. Before: - In /var/log/messages: ``` [ 16.392988] lm90 0-004c: cannot request IRQ 48 [ 16.398280] lm90: probe of 0-004c failed with error -22 ``` - Sensors does not work: ``` root@turris:~# sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. ``` After: ``` root@turris:/# sensors sa56004-i2c-0-4c Adapter: MPC adapter (i2c@3000) temp1: +44.0°C (low = +0.0°C, high = +70.0°C) (crit = +85.0°C, hyst = +75.0°C) temp2: +73.8°C (low = +0.0°C, high = +70.0°C) ALARM (HIGH) (crit = +85.0°C, hyst = +75.0°C) ``` [1] https://lore.kernel.org/linux-gpio/20220906105431.30911-1-pali@kernel.org/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 2f496c34b6dfbedbfbff8d2ade5d629f096e40bd) (c&p commit ID from openwrt's master) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: fix fw_setsysWenli Looi2022-09-231-1/+1
| | | | | | | | | | This change was included in the original pull request but later omitted for some reason: https://github.com/openwrt/openwrt/pull/4936 Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> (cherry picked from commit 4cccea02a60aee0dd77c4db35672c92e2fe384a1)
* kernel: add missing symbolStijn Tintel2022-09-221-0/+5
| | | | | | | | Enabling KERNEL_KPROBES exposes KERNEL_BPF_KPROBE_OVERRIDE. Add a build option for it to fix build failures with KERNEL_KPROBES enabled. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 500c37c56ff60b46c30bb0ea7c92676bea23331a)
* bcm4908: fix -EPROBE_DEFER support in bcm4908_enetRafał Miłecki2022-09-212-1/+58
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1722e23ffcf9038114142a2129c29eb3cdec8ff9)
* kernel: update U-Boot NVMEM driverRafał Miłecki2022-09-213-0/+59
| | | | | | | | 1. Fix casting 2. Support DT-defined variables Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5652f378c6c607f99a15e6472cdca46c9c4b6162)
* bcm4908: backport mtd parser for Broadcom's U-Boot partitionRafał Miłecki2022-09-212-0/+138
| | | | | | | | Broadcom's U-Boot contains environment data blocks. They need to be found (offsets aren't predefined) to access env variables. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 137149847d0f374515f38952ce0986b03a97f2e4)
* mediatek: fix Unifi 6LR network configStijn Tintel2022-09-201-2/+1
| | | | | | | | | | | | | | | | | When the v1 and v2 variants of the U6LR were introduced, the board network config was not adapted to the new device names. Due to this, the wrong network config is applied during initial boot. The resulting config has lan, wan and a switch, while this device only has a single ethernet interface without a switch. Fix this by using a wildcard that matches all the variants. Fixes: 15a02471bb85 ("mediatek: new target mt7622-ubnt-unifi-6-lr-v1") Fixes: 5c8d3893a78f ("mediatek: new target ubnt_unifi-6-lr-v1-ubootmod") Fixes: 31d86a1a1192 ("mediatek: add Ubiquiti UniFi 6 LR v2 targets") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 117f41ee95ec445dce5ab9332bc27a6311747c0d)
* mpc85xx: fix unset kernel symbolsDavid Bauer2022-09-201-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: rt2x00: experimental improvements for MT7620 wifiDaniel Golle2022-09-1940-498/+1455
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Serge Vasilugin reports: To improve mt7620 built-in wifi performance some changes: 1. Correct BW20/BW40 switching (see comments with mark (1)) 2. Correct TX_SW_CFG1 MAC reg from v3 of vendor driver see https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 3. Set bbp66 for all chains. 4. US_CYC_CNT init based on Programming guide, default value was 33 (pci), set chipset bus clock with fallback to cpu clock/3. 5. Don't overwrite default values for mt7620. 6. Correct some typos. 7. Add support for external LNA: a) RF and BBP regs never be corrected for this mode b) eLNA is driven the same way as ePA with mt7620's pin PA but vendor driver explicitly pin PA to gpio mode (for forrect calibration?) so I'm not sure that request for pa_pin in dts-file will be enough First 5 changes (really 2) improve performance for boards w/o eLNA/ePA. Changes 7 add support for eLNA Configuration w/o eLAN/ePA and with eLNA show results tx/rx (from router point of view) for each stream: 35-40/30-35 Mbps for HT20 65-70/60-65 Mbps for HT40 Yes. Max results for 2T2R client is 140-145/135-140 with peaks 160/150, It correspond to mediatek driver results. Boards with ePA untested. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [directly include v3 of the patchset submitted upstream] (cherry picked from commit 31a6605de04218e1c04bd5c2436c24d7d1c07506) (cherry picked from commit e785ca05e9f0502894772f5df92192b816ba5d7c) (cherry picked from commit 412fcf3d4400f84551f3ead0514834c62d94a251)
* mac80211: rt2x00: fix typoSungbo Eo2022-09-192-5/+3
| | | | | | | Add missing semicolon and refresh patches. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit d826c91704d2baa5e389c225791740e4c61d62c4)
* mac80211: add patch descriptions to rt2x00 patchesDaniel Golle2022-09-186-1/+76
| | | | | | | | Prepare patches for sending upstream by adding patch descriptions generated from the original OpenWrt commits adding each patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit d4feb66048f6a8f387eedfb162a1184cdae9d756)
* mediatek: fix ledbar of UniFi 6 LR when running custom U-BootDaniel Golle2022-09-181-1/+2
| | | | | | | | | | | The RGB LED of the UniFi 6 LR v1 doesn't work when using the Openwrt- built U-Boot. This is because the vendor loader resets the ledbar controller while our U-Boot doesn't care. Add reset-gpio so the ledbar driver in Linux will always reset the ledbar controller. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 0b5cf952cf5b70d3af2424d05b15ce2730a3dc11)
* ramips: add support for Ubiquiti UniFi FlexHDSven Wegener2022-09-184-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- - SoC: MediaTek MT7621AT with 128 MiB RAM and 32 MiB Flash - Wi-Fi: MediaTek MT7603 (b/g/n, 2x2) and MediaTek MT7615 (ac, 4x4) - Bluetooth: CSR8811 (internal USB, install kmod-bluetooth) Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Update the bootloader environment. $ fw_setenv devmode TRUE $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt" $ fw_setenv bootcmd "run boot_openwrt" 3. Transfer the OpenWrt sysupgrade image to the device using SCP. 4. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 5. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4 6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock6 $ dd if=openwrt.bin of=/dev/mtdblock7 7. Reboot the device. It should boot into OpenWrt. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 820f0c07c544652c1c53a45262a481ac5dbe139b)
* ath79: Make patches apply againDaniel Golle2022-09-182-13/+13
| | | | | | | | | | The patch adding support for LEDs connected to a reset controller did not apply any more, refresh it on top of current master. Fixes: 53fc987b2552 ("generic: move ledbar driver from mediatek target") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 76fc277917fc847892dbbf525aea9f90a035d296)
* generic: move ledbar driver from mediatek targetSven Wegener2022-09-183-3/+4
| | | | | | | This moves the ledbar driver to generic, to be also used by the ramips target. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 53fc987b25524c28525313347f0e2e5653dce43c)
* mediatek: add led countSven Wegener2022-09-181-1/+7
| | | | | | | | | | The LEDs connected to the MCU are so-called smart LEDs and their signal is daisy-chained. Because of this, the MCU needs to be told how many LEDs are connected. It also means the LEDs could be individually controlled, if the MCU has a command for this. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 76198e8f09a607c6aca2621f59d7a4cd7f6653e3)
* mediatek: add initialization after resetSven Wegener2022-09-181-0/+14
| | | | | | | | | During GPIO initialization the pin state flips and triggers a reset of the ledbar MCU. It needs to be moved through an initialization sequence before working correctly. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 013a956f086dc5d88f6e9cbd852ed4d900d436e0)
* mediatek: add support for reset gpioSven Wegener2022-09-181-0/+26
| | | | | | | | Some versions of the ledbar MCU have a reset pin. It needs to be correctly initialized or we might keep the MCU in reset state. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 84e4bbf5f049cdb862eb25c446bd6973ed4238aa)
* mediatek: support reading more than one byte of responseSven Wegener2022-09-181-7/+8
| | | | | | | There are commands that return more than one byte of response. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 7c852e7df50e370b26b060c96c3cc4491cee88eb)
* mediatek: cast literal value to charSven Wegener2022-09-181-1/+1
| | | | | | | | | | | Or the comparison against a signed char is always true, because the literal 0xaa is treated as an unsigned int, to which the signed char is casted during comparison. 0xaa is above the positive values of a signed char and negative signed char values result in values larger than 0xaa when casted to unsigned int. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit e9a22ce2535c4a0faf83d5595304fe0e2c7bd1b2)
* mediatek: correctly log i2c responseSven Wegener2022-09-181-2/+2
| | | | | | | | The read response is in the i2c_response variable. Also use %hhx format, because we're dealing with a single char. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit c4f9f9b44c82ffeacd9d3c00ba07171c35831337)
* mediatek: remove gpiod_direction_output()Sven Wegener2022-09-181-2/+0
| | | | | | | It's already set to output with GPIOD_OUT_LOW. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit a188356484f434c72ea536d91d7f93f59c562eb5)
* mediatek: do not use gpiod_set_raw_value()Sven Wegener2022-09-181-2/+2
| | | | | | | The polarity of the signal is set in the device dts. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 56c2d15587dfe5285f1cf3bfb236c827bc446465)
* kernel: modules: package kmod-crypto-essivDaniel Golle2022-09-181-0/+12
| | | | | | | Package kernel module providing ESSIV support for block encryption. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 4133102898502c9bb453e8603b6c891aa103bce4)
* mediatek: fix typo in bpi-r64 image recipeDaniel Golle2022-09-181-1/+1
| | | | | | | | Janusz Dziedzic reported a typo introduced by a recent commit. Fix it. Fixes: 50c892d67b ("mediatek: bpi-r64: make initramfs/recovery optional") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 007c8809c1e888748af70c1b878f4d0105fe7531)
* mediatek: bpi-r64: make initramfs/recovery optionalDaniel Golle2022-09-181-2/+7
| | | | | | | | | | Only include recovery image in SD card image generated for the BananaPi BPi-R64 if building with CONFIG_TARGET_ROOTFS_INITRAMFS This allows to build images larger than 32 MB (the limit for initramfs/recovery image) by deselecting initramfs. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 50c892d67bb4af90861be9fbb6831c2eeb62de11)
* ramips: fix GB-PC1 and GB-PC2 LEDsArınç ÜNAL2022-09-183-17/+15
| | | | | | | | | | | | | | | | Add the missing LEDs for GB-PC2. Some of these LEDs don't exist on the device schematics. Tests on a GB-PC2 by me and Petr proved otherwise. Remove ethblack-green and ethblue-green LEDs for GB-PC1. They are not wired to GPIO 3 or 4 and the wiring is currently unknown. Set ethyellow-orange to display link state and activity of the ethyellow interface for GB-PC2. Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf Tested-by: Petr Louda <petr.louda@outlook.cz> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit 2a6ef7f53d7b96e4ee0200196c28ed6b0a7c8465)
* wireless-regdb: update to 2022-08-12Nick Hainke2022-09-171-2/+2
| | | | | | | | | | Changes: 9dc9c89 wireless-regdb: update regulatory database based on preceding changes 442bc25 wireless-regdb: update 5 GHz rules for PK and add 60 GHz rule daee7f3 wireless-regdb: add 5 GHz rules for GY Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 1d2d69c810261308652a577fc136e7327e0e1358)
* kernel: bump 5.10 to 5.10.143John Audia2022-09-177-15/+15
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit b77217d916ba48accbdb46589e6e5e3a9972c44e)
* kernel: bump 5.10 to 5.10.142John Audia2022-09-1712-25/+25
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 837fd23c80b22c566b40181a28630ac29af8f96e)
* kernel: bump 5.10 to 5.10.141John Audia2022-09-1724-61/+61
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit e8a62a1e6040de71bdcb1be1a1c30c064acbc059)
* kernel: bump 5.10 to 5.10.139John Audia2022-09-172-3/+3
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit e0753c5d5cef5b03c60601364188afb262ccd02e)
* kernel: build crypto md5/sha1/sha256 modules for powerpcJosef Schlehofer2022-09-171-1/+19
| | | | | | | | | | | | | | | | | This builds and enables kernel optimized modules for mpc85xx target: - CONFIG_CRYPTO_MD5_PPC [1] - CONFIG_CRYPTO_SHA1_PPC_SPE [2] - CONFIG_CRYPTO_SHA256_PPC_SPE [3] Where it was possible, then use Signal Processing Engine, because CONFIG_SPE is already enabled in mpc85xx config. [1] https://cateee.net/lkddb/web-lkddb/CRYPTO_MD5_PPC.html [2] https://cateee.net/lkddb/web-lkddb/CRYPTO_SHA1_PPC.html [3] https://cateee.net/lkddb/web-lkddb/CRYPTO_SHA256_PPC_SPE.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 3a702f8733ff371f30e9e3ba1e1aed5f4686b6b4)
* scripts/download.pl: fix downloads with wgetPetr Štetiar2022-09-161-2/+8
| | | | | | | | | | | | | | | | | | | | | Several users of wget for downloads (curl is not available in the system) have reported broken download functionality: wget --tries=5 --timeout=20 --output-document=- https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.142.tar.xz http://: Invalid host name. Thats all happening due to '' was passed as an argument, which got later expanded to http://. In the context of a list constructor '' is not nothing, it is an empty string element. So fix it by using () as it will yield "nothing" and thus not introduce an empty string element. Fixes: #10692 Fixes: 90c6e3aedf16 ("scripts: always check certificates") Signed-off-by: Jo-Philipp Wich <jo@mein.io> [shellwords() -> ()] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 50a48faa1b8424e6b4b436b7118fffa2cba14b18)
* scripts/download.pl: silence can't exec curl warningPetr Štetiar2022-09-161-1/+1
| | | | | | | | | | | | When running build in verbose mode `make V=s` we can see a lot of following warnings when curl is not available in the system: Can't exec "curl": No such file or directory at scripts/download.pl line 77. So lets fix it by redirecting of the stderr to null hole. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit c836ca84e8f641e10a8349a8f9b7432b33d6cec1)
* scripts: always check certificatesJosh Roys2022-09-163-2/+11
| | | | | | | | | | | | | | | | Remove flags from wget and curl instructing them to ignore bad server certificates. Although other mechanisms can protect against malicious modifications of downloads, other vectors of attack may be available to an adversary. TLS certificate verification can be disabled by turning oof the "Enable TLS certificate verification during package download" option enabled by default in the "Global build settings" in "make menuconfig" Signed-off-by: Josh Roys <roysjosh@gmail.com> [ add additional info on how to disable this option ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 90c6e3aedf167b0ae1baf376e7800a631681e69a)
* tools: remove xxd packagePetr Štetiar2022-09-162-20/+1
| | | | | | | | | It shouldn't be needed anymore as we've now `scripts/xxdi.pl`, which should be self contained and fully compatible `xxd -i` replacement. Fixes: #10555 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 88c9056a70901577489ecdc7a25207a9b7576d6e)
* build: provide xxd -i with scripts/xxdi.plPetr Štetiar2022-09-161-1/+4
| | | | | | | | | | | | | | | Dependency on xxd was added in commit c4dd2441e787 ("tools: add xxd (from vim)") as U-Boot requires xxd to create the default environment from an external file. Later in commit 2b94aac7a128 ("tools: xxd: use more convenient source tarball"), xxd from another source was used instead, but that source is currently unavailable, so let's fix it by using simple xxdi.pl Perl script instead. Fixes: #10555 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit eae2fb8027cb892e42181e471ba344aa5d26bf7e)
* scripts: xxdi.pl: add xxd -i compat modePetr Štetiar2022-09-161-18/+19
| | | | | | | | | | | | So it can serve as a standalone drop in replacement for xxd utility used currently mostly in U-Boot packages with `xxd -i` mode which outputs C include file style, with aim for byte to byte identical output, so the eventual difference in the generated output is easily spottable. Fixes: #10555 Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jo-Philipp Wich <jo@mein.io> [perl-fu] (cherry picked from commit 06e01e817ec6643a35beb9e6946689e9cc7d020a)
* scripts: xxdi.pl: remove File::Slurp dependencyJo-Philipp Wich2022-09-161-2/+17
| | | | | | | | In order to make it more portable. Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 8b278a76d90e3724815a5fde32be59f7796be1d8)
* scripts: add xxdi.plPetr Štetiar2022-09-161-0/+50
| | | | | | | | | | xxdi.pl is a Perl script that implements vim's 'xxd -i' mode so that packages do not have to use all of vim just to get this functionality. References: #10555 Source: https://github.com/gregkh/xxdi/blob/97a6bd5cee05d1b15851981ec38ef5a460ddfcb1/xxdi.pl Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 2117d04a3aaad3394c0afec799d9c43f8a09c2cf)
* mac80211: backport tx queueing bugfixes add a bug fix for a rare crashFelix Fietkau2022-09-154-0/+171
| | | | | | | | | | Re-introduce the queue wake fix that was reverted due to a regression, but this time with the follow-up fixes that take care of the regression. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 9a93b62f315ad4c9f021c414ed80ba337ab4a01e) (cherry-picked from commit 8b804cae5e039142bc63896a75f15146eca3bebc) (cherry-picked from commit 8b06e06832ebe757246582b65306ad2a2537741f)
* bcm53xx: update NVMEM driver for NVRAMRafał Miłecki2022-09-144-5/+230
| | | | | | | Include support for NVMEM cells. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 2f50c53f1772f24e4687e960e21c5b392fb522f0)
* kernel: backport mtd dynamic partition patchChristian Marangi2022-09-137-6/+112
| | | | | | | | | | | | Backport upstream solution that permits to declare nvmem cells with dynamic partition defined by special parser. This provide an OF node for NVMEM and connect it to the defined dynamic partition. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1a9ee367343edce263f82cc91a49d796c9d45ea3)
* ipq40xx: add GL-AP1300 label-mac-deviceDavid Bauer2022-09-111-0/+1
| | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 470ca65bda154fb5a601c6bbe20e20646535563f)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 21:39:16 +0000