aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: correct keenetic-series switch indexVitaly Chekryzhev2017-01-201-1/+1
| | | | | | Fix switch name typo Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
* ar71xx: Chipidea USB device supportSvetoslav Neykov2017-01-204-1/+203
| | | | | | | | | | | | Changes the platform to use the Chipidea driver instead of the generic USB host driver which has support for both host and device modes (selected on boot). The changes in 930-chipidea-pullup.patch are already in mainline. I'll upstream 920-usb-chipidea-AR933x-platform-support.patch once I can test the changes with a newer kernel. Signed-off-by: Svetoslav Neykov <svetoslav@neykov.name>
* octeon: fix mtd partitions for erlite on cmdlineJiri Kastner2017-01-201-1/+1
| | | | | | | | | erlite mtdparts exposes boot0, boot1 and eeprom regions as read/write. this patch adds readonly flags, so these regions can't be modified. same as it is already for ER profile. Signed-off-by: Jiri Kastner <cz172638@gmail.com>
* sdk: avoid using private repository clone urls as base repo entryJo-Philipp Wich2017-01-191-1/+1
| | | | | | | Only consider the repository origin url as valid base feed entry if it is a git://, http:// or https:// location. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: fix an ethernet stability issue triggered by receving packets during ↵Felix Fietkau2017-01-191-0/+53
| | | | | | | | | | | | | | boot Disabling ethernet during reboot (only to enable it again when the ethernet driver attaches) can put the chip into a faulty state where it corrupts the header of all incoming packets. This happens if packets arrive during the time window where the core is disabled, and it can be easily reproduced by rebooting while sending a flood ping to the broadcast address. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: disable CONFIG_AUTOREMOVE for packages/tools where QUILT is usedFelix Fietkau2017-01-195-10/+16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: include CONFIG_AUTOREMOVE in HOST_STAMP_PREPAREDFelix Fietkau2017-01-191-1/+1
| | | | | | Fixes build issues when changing the CONFIG_AUTOREMOVE setting Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix spurious irq stormFelix Fietkau2017-01-191-0/+87
| | | | | | | | | | | Since the MIPS IRQ stack patches, lantiq devices were emitting a storm of messages like this: [ 567.872172] Spurious IRQ: CAUSE=0x1100c300 Fix this by reworking the IRQ dispatch code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: include CONFIG_AUTOREMOVE in STAMP_PREPAREDFelix Fietkau2017-01-191-1/+1
| | | | | | Fixes build issues when changing the CONFIG_AUTOREMOVE setting Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: fix triggering opkg/host compilationJo-Philipp Wich2017-01-191-1/+1
| | | | | | | | | | | Commit 131db36 "build: remove separate /install step for host builds" dropped the package/*/host/install targets in favor to performing the install steps within the compile target instead. Adjust package/Makefile accordingly in order to prevent a missing staging_dir/host/bin/opkg when staging package archives into the rootfs. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* gettext-full: fix to use $STAGING_DIR_HOSTPKG instead of $STAGING_DIR/hostMatthias Schiffer2017-01-191-4/+4
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* rules.mk: export STAGING_DIR_HOSTPKGMatthias Schiffer2017-01-191-1/+1
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* build: extend CONFIG_AUTOREMOVE to tools/Felix Fietkau2017-01-183-0/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove separate /install step for host buildsFelix Fietkau2017-01-184-67/+68
| | | | | | Reduces the number of recursive make invocations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add support for automatically removing build dir contents during buildFelix Fietkau2017-01-184-3/+32
| | | | | | | | | This is used to save space on buildbot instances. If any part of a package needs to be rebuild, the whole package is rebuilt from scratch. Stamp files are preserved to allow dependency checks to work Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: stage bin/ packages inside PKG_BUILD_DIRFelix Fietkau2017-01-181-2/+9
| | | | | | | | | This makes the build slightly more efficient by avoiding the need to re-stage packages on every full build run. It is also necessary for the upcoming CONFIG_AUTOREMOVE feature Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: stage unstripped packages inside PKG_BUILD_DIRFelix Fietkau2017-01-182-10/+14
| | | | | | | | | This makes the build slightly more efficient by avoiding the need to re-stage packages on every full build run. It is also necessary for the upcoming CONFIG_AUTOREMOVE feature Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: write ABI_VERSION file when staging the packageFelix Fietkau2017-01-181-7/+1
| | | | | | | The make target does not rewrite the file if the contents didn't change. This causes make to always consider the target old. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: introduce extra targets that contain only proper dependenciesFelix Fietkau2017-01-185-15/+23
| | | | | | This can be used to check if targets like prepare or compile are up to date Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: define common subdir targets in rules.mkFelix Fietkau2017-01-184-18/+15
| | | | | | Reduce build system clutter and enable further rework Signed-off-by: Felix Fietkau <nbd@nbd.name>
* git-kernel: $(SUBDIR) should always be $(LINUX_VERSION)Mirko Vogt2017-01-181-1/+1
| | | | | | | | | | | | | | | | | | Before SUBDIR was set to $(PATCHVER) which may or may not include the minor version number of the linux kernel version. Usually it doesn't. So the git-clone'd linux kernel was packed without the minor version number taken into account, which broke further processing, as it expected the extracted dir being named linux-$(LINUX_VERSION) (=with minor version) rather than linux-$(PATCHVER) (=without minor version). Changing SUBDIR to $(LINUX_VERSION) creates consistent behaviour here. Signed-off-by: Mirko Vogt <mirko-openwrt@nanl.de>
* build: move STAGING_DIR_HOSTPKG and BUILD_DIR_HOST back to a common ↵Matthias Schiffer2017-01-186-10/+10
| | | | | | | | | | | | | directory for all targets Using a single host package staging dir (and build dir) significantly speeds up builds when multiple targets are built in succession, especially for large host packages like NodeJS. $(STAGING_DIR)/host is kept in addition to $(STAGING_DIR_HOSTPKG) in most places; it is still used as destination for host files in Build/InstallDev. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: add /etc/iproute2/rt_protosHans Dedecker2017-01-182-1/+20
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: add support for Netgear WN3000RPv3Thibaut VARENE2017-01-187-2/+163
| | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: mark soft_config mtd part as writeable for RB-941-2nDThibaut VARENE2017-01-181-1/+0
| | | | | | | | | The soft_config partition must be writeable for rbcfg to be able to enact changes to the routerboot configuration. The read-only flag was a mistake in the initial patch. Removing it brings mach-rb941.c in line with all other RB platforms. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ipq806x: Fix wireless support for Netgear Nighthawk X4S D7800Zhang Jingye2017-01-182-11/+15
| | | | | | | | | | D7800 has a simular hardware to R7800 and uses dual QCA9980 for both 2.4GHz and 5GHz band. However there is no proper initialization for them, which causes a kernel panic due to failed firmware loading. This patch adds d7800 to ath10k caldata extraction list. I can get two functional wireless bands after making change to it. Signed-off-by: Zhang Jingye <934526987@qq.com>
* ramips: fix mac address of miwifi-miniBangLang Huang2017-01-182-1/+5
| | | | | | | For the miwifi-mini, the offset of ethernet mac should be 0x28 which you can easyily dump from 'Factory' partition. Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* tools/qemu: use default host configure rule ; set appropriate vars & argsAlexandru Ardelean2017-01-181-9/+7
| | | | | | | | | | | Admittedly, this is my own OCD wanting to get rid of this. Because I tried (a while back to upgrade QEMU to a newer version), and (during that attempt) I tried to get rid of this. Tested on Linux & Mac. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ramips: simplify EX2700 network configJoseph C. Lehner2017-01-181-2/+2
| | | | | | Don't create a vlan for the Netgear EX2700's only Ethernet port. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: Add back sdhci-mt7620 driver to default configRosen Penev2017-01-181-4/+4
| | | | | | The driver no longer causes kernel panics and CPU hangs. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devicesRafał Miłecki2017-01-183-0/+9
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: move (& update) upstream accepted brcmfmac patchesRafał Miłecki2017-01-185-0/+3
| | | | | | These 3 patches are now in wireless-drivers-next tree. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* sdk: do not strip static librariesJo-Philipp Wich2017-01-181-1/+1
| | | | | | | | | | | | | Do not strip static libraries shipped with the SDK in order to preserve the archive index. If we strip the index of the shipped libraries, host programs will fail to link these libraries with errors like: libssl.a: error adding symbols: Archive has no index; run ranlib to add one The error was found while investigating a Python host build failure within the SDK environment. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netifd: update to git HEAD versionHans Dedecker2017-01-171-2/+2
| | | | | | a057f6e device: fix DEV_OPT_SENDREDIRECTS definition Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* build: properly pass CPP and CXX flags in HOST_MAKE_VARSJo-Philipp Wich2017-01-171-1/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: introduce default HOST_MAKE_VARS for host-buildsAlexandru Ardelean2017-01-171-1/+7
| | | | | | Inspired/adapted from `package-defaults.mk` MAKE_VARS. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* tools/cmake: remove HOST_CONFIGURE_CMD and re-distribute the args & varsAlexandru Ardelean2017-01-161-5/+2
| | | | | | | | | | The final semantic is the same, but this is a bit more correct. Build tested on Windows 10 (yes, there is some Ubuntu mode for Windows 10, and I've been also building LEDE on it for a few weeks). Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* x86: add kernel module for sp5100_tco watchdogChris Blake2017-01-161-0/+15
| | | | | | | | | | | This change adds the sp5100_tco driver as a kernel module for the x86 target. Specifically, this can be used by the PCEngines APU2/APU3. The reason for having this as a kernel module is to allow users to load/unload it on demand, as the I2C interface on the APU2/APU3 will not work while this module is loaded. More info can be found on GitHub at https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: Add sp5100_tco AMD patchesChris Blake2017-01-164-0/+217
| | | | | | | | | | | | | | This adds the following patches to the x86 target: sp5100_tco: Add AMD Mullins platform support sp5100_tco: Add AMD Carrizo platform support sp5100_tco: fix the device check for SB800 and later chipsets watchdog: sp5100_tco: properly check for new register layouts With these added, the sp5100_tco driver can then be used on newer AMD platforms, such as the PCEngines APU2/APU3 boards. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: remove the xen_domu subtargetFelix Fietkau2017-01-166-135/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86/generic: add xen DomU supportFelix Fietkau2017-01-163-4/+67
| | | | | | Copy the relevant config options from the xen_domu subtarget Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix up the kernel config for the mikrotik subtargetFelix Fietkau2017-01-161-0/+64
| | | | | | Limit enabled devices to routerboards, disable all other devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix network config for Mikrotik RB411UCezary Jackiewicz2017-01-161-0/+1
| | | | | | | Mikrotik RB411U has only one ethernet port - eth0. This patch allows to create correct config with one lan section. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ar71xx: add support for RB-941-2nDThibaut VARENE2017-01-1611-4/+243
| | | | | | | | | | | | | | | | Add full support for Mikrotik RB-941-2nD (hAP lite) Original patch by Sergey Sergeev <adron@yapic.net> and more information is available here: https://wiki.openwrt.org/toh/mikrotik/rb941_2nd I updated and adapted the patch to apply cleanly to LEDE trunk and added proper numbering for the switch ports (matching case labels). Tested working on actual hardware with the information provided in the above webpage. Sysupgrade works. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove yaffs2 support, it is no longer neededFelix Fietkau2017-01-1656-17333/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* adm5120: mark the rb1xx subtarget as brokenFelix Fietkau2017-01-161-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: convert mikrotik routerboard support to UBIFelix Fietkau2017-01-1613-114/+80
| | | | | | | | | | Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: create a proper default profile for the mikrotik subtarget, drop ↵Felix Fietkau2017-01-162-23/+6
| | | | | | other profiles Signed-off-by: Felix Fietkau <nbd@nbd.name>
* musl: update musl to 1.1.16+ and switch to download from gitChristian Lamparter2017-01-1631-1595/+7
| | | | | | | | | | | | | | | | | | | | | This patch updates musl to 1.1.16+ [0] and removes all the backported patches. This is a major release and tagged as such. For more information visit musl-libc.org or read the WHATSNEW. Furthermore, this patch also changes musl to download directly from git. This makes it easier to update musl in the future. The patch custom Add-format-attribute-to-some-function-declarations.patch was assigned a new 400- number. This should avoid confusion since 0xx numbers are usually assigned to backports. [0] <http://git.musl-libc.org/cgit/musl/commit/?id=769f53598e781ffc89191520f3f8a93cb58db91f> Cc: Hannu Nyman <hannu.nyman@iki.fi> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: Jo-Philipp Wich <jo@mein.io> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* zlib: Update to 1.2.11Daniel Engberg2017-01-161-3/+3
| | | | | | | | Update to 1.2.11 as suggested by upstream Also add SF as primary source and main site as fallback Note: SF doesn't carry the 1.2.11 update yet. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 09:53:15 +0000