aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* treewide: fix initramfs detectionRobert Marko2020-12-202-2/+2
| | | | | | | | | | | | | | | | Commit "initramfs: switch to tmpfs to fix ujail" switched initramfs to now use tmpfs, it causes $(rootfs_type) to now return tmpfs when running initramfs image instead of being empty. This broke initramfs detection which is required so that when installing on MikroTik devices firmware partition would first get erased fully before writing. So, lets test for $(rootfs_type) returning "tmpfs" instead. Fixes: 7fd3c68 ("initramfs: switch to tmpfs to fix ujail) Signed-off-by: Robert Marko <robimarko@gmail.com>
* uhttpd: don't redirect to HTTPS by defaultPetr Štetiar2020-12-201-1/+1
| | | | | | | | | | | | | | | | | | | So we can ship px5g-wolfssl by default in the release image, but still make the HTTPS for LuCI optional. This small change with addition of `CONFIG_PACKAGE_px5g-wolfssl=y` into the buildbot's seed config for the next release should provide optional HTTPS in the next release. Disabling the current default automatic uhttpd's redirect to HTTPS should make the HTTPS optional. That's it, user would either need to switch to HTTPS by manually switching to https:// protocol in the URL or by issuing the following commands to make the HTTPS automatic redirect permanent: $ uci set uhttpd.main.redirect_https=1 $ uci commit uhttpd $ service uhttpd reload Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mvebu: macchiatobin-singleshot: enable heartbeat LEDTomasz Maciej Nowak2020-12-202-1/+66
| | | | | | | | | | | | | | | With board revision 1.3, SolidRun moved the power LED to the middle of the board. In old place of power LED a GPIO controllable heartbeat LED was added. This commit touches only Single Shot variant, because all have revision 1.3. Some boards could be placed in an enclosure, therefore the LED18 is enabled by default, since that'll be the only visible indicator that the board is operating. Ref: http://wiki.macchiatobin.net/tiki-index.php?page=Schematics#Revision1.3_Electrical_Design_Changes Ref: http://macchiatobin.net/wp-content/uploads/2017/11/MACCHIATOBin-rev-1_3.pdf Reported-by: Alexandra Alth <alexandra@alth.de> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mt76: Fix compile against glibcHauke Mehrtens2020-12-192-1/+26
| | | | | | The mt76 test tools did not compile against glibc. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: Deactivate sanitizer on MIPS and ARCHauke Mehrtens2020-12-191-4/+4
| | | | | | | | | | MIPS 32 bit support for sanitizer was added with GCC 9, MIPS 64 bit and ARC are still not supported in GCC 10. Deactivate them for now and change this when we change the default compiler to GCC 9 or later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: airtight c-75: use second flash chipTomasz Maciej Nowak2020-12-192-6/+23
| | | | | | | | | | | The flash capacity is divided in two flash chips and currently only first is used. Increase available space for OpenWrt by additional 16 MiB using mtd-concat driver. Because U-Boot might not be able to load kernel image spanned through two flash chips, the size of kernel is limited to space available on first first chip. Cc: Vladimir Georgievsky <vladimir.georgievsky@yahoo.com> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: add support for AirTight C-75Tomasz Maciej Nowak2020-12-193-0/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AirTight Networks (later renamed to Mojo Networks) C-75 is a dual-band access point, also sold by WatchGuard under name AP320. Specification SoC: Qualcomm Atheros QCA9550 RAM: 128 MiB DDR2 Flash: 2x 16 MiB SPI NOR WIFI: 2.4 GHz 3T3R integrated 5 GHz 3T3R QCA9890 oversized Mini PCIe card Ethernet: 2x 10/100/1000 Mbps QCA8334 port labeled LAN1 is PoE capable (802.3at) USB: 1x 2.0 LEDs: 7x which two are GPIO controlled, four switch controlled, one controlled by wireless driver Buttons: 1x GPIO controlled Serial: RJ-45 port, Cisco pinout baud: 115200, parity: none, flow control: none JTAG: Yes, pins marked J1 on PCB Installation 1. Prepare TFTP server with OpenWrt initramfs-kernel image. 2. Connect to one of LAN ports. 3. Connect to serial port. 4. Power on the device and when prompted to stop autoboot, hit any key. 5. Adjust "ipaddr" and "serverip" addresses in U-Boot environment, use 'setenv' to do that, then run following commands: tftpboot 0x81000000 <openwrt_initramfs-kernel_image_name> bootm 0x81000000 6. Wait about 1 minute for OpenWrt to boot. 7. Transfer OpenWrt sysupgrade image to /tmp directory and flash it with: sysupgrade -n /tmp/<openwrt_sysupgrade_image_name> 8. After flashing, the access point will reboot to OpenWrt. Wait few minutes, until the Power LED stops blinking, then it's ready for configuration. Known issues Green power LED does not work. Additional information The U-Boot fails to initialise ethernet ports correctly when a UART adapter is attached to UART pins (marked J3 on PCB). Cc: Vladimir Georgievsky <vladimir.georgievsky@yahoo.com> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* bcm53xx: use correct case for TP-Link in DEVICE_VENDORMoritz Warning2020-12-191-2/+2
| | | | | | | | Adjust spelling of vendor names to what is used in other places. Signed-off-by: Moritz Warning <moritzwarning@web.de> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: use upper case for NETGEAR in DEVICE_VENDORMoritz Warning2020-12-191-2/+1
| | | | | | | | | | Adjust spelling of vendor name to what is used in other places. Also move definition in shared section. Signed-off-by: Moritz Warning <moritzwarning@web.de> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: xrx200: remove redundant stp parametersAleksander Jan Bajkowski2020-12-193-10/+0
| | | | | | | These parameters are the same as in vr9.dtsi. This patch removes redundant parameters. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* mac80211: do not drop tx nulldata packets on encrypted linksFelix Fietkau2020-12-181-0/+25
| | | | | | Fixes sending out nulldata probing frames Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/libressl: update to 3.3.1Rosen Penev2020-12-181-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mt76: update to the latest versionFelix Fietkau2020-12-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 7f53d68b1af9 mt76: mt7615: add debugfs knob for setting extended local mac addresses 1a2547b27dfc mt76: do not set NEEDS_UNIQUE_STA_ADDR for 7615 and 7915 2741fd071bb7 mt76: mt7915: support 32 station interfaces 709f2cd77810 mt76: mt7915: fix processing txfree events 434940e08233 mt76: mt7915: measure channel noise and report it via survey 236326896589 mt76: mt7615: retry if mt7615_mcu_init returns -EAGAIN b5c593b63f4c mt76: mt7663s: move tx/rx processing in the same txrx workqueue 75157b59ae4e mt76: mt7663s: convert txrx_work to mt76_worker 6dc67b058e2a mt76: mt7663s: disable interrupt during txrx_worker processing b381729626bb mt76: sdio: convert {status/net}_work to mt76_worker 9cb12f7042cc mt76: mt7915: fix DRR sta bss group index 75977a85e844 mt76: mt7915: disable OFDMA/MU-MIMO UL 6cdebe805862 mt76: rename __mt76_mcu_send_msg to mt76_mcu_send_msg eb9afae96b65 mt76: rename __mt76_mcu_skb_send_msg to mt76_mcu_skb_send_msg 8c73f3b15ada mt76: implement .mcu_parse_response in struct mt76_mcu_ops fcfbb046c2f3 mt76: move mcu timeout handling to .mcu_parse_response 477caa196ffe mt76: move waiting and locking out of mcu_ops->mcu_skb_send_msg a4d71501bad6 mt76: make mcu_ops->mcu_send_msg optional 80c310c59ad1 mt76: mt7603: switch to .mcu_skb_send_msg 082b26181013 mt76: implement functions to get the response skb for MCU calls ee40800df2e4 mt76: mt7915: move eeprom parsing out of mt7915_mcu_parse_response d33943baac47 mt76: mt7915: query station rx rate from firmware b8874e8756d9 mt76: add back the SUPPORTS_REORDERING_BUFFER flag 633ae5961db6 mt76: mt7615: enable beacon filtering by default for offload fw 9a203fea3540 mt76: mt7615: introduce quota debugfs node for mt7663s f9ae638af7e2 mt76: mt7663s: get rid of mt7663s_sta_add 1a5758d894d0 mt76: mt7663s: fix a possible ple quota underflow dea10c03316f mt76: sdio: get rid of sched.lock eb4c09957938 mt76: mt7915: set fops_sta_stats.owner to THIS_MODULE 594890b11155 mt76: mt7915: update ppe threshold 8884a5def518 mt76: mt7915: rename mt7915_mcu_get_rate_info to mt7915_mcu_get_tx_rate 33b89f4a1bf4 mt76: set fops_tx_stats.owner to THIS_MODULE 4d019c9672ec sync with upstream changes 35e3cd1db479 mt76: mt7603: fix ED/CCA monitoring with single-stream devices 4f9f79b085b1 wireless: mt76: convert tasklets to use new tasklet_setup() API 20e8cf935ed0 mt76: dma: fix possible deadlock running mt76_dma_cleanup 36089a655f58 mt76: mt7915: fix sparse warning cast from restricted __le16 68c4eedafd61 mt76: fix memory leak if device probing fails 9a1a0a4dec71 mt76: mt7603: add additional EEPROM chip ID 01b943295719 mt76: move mt76_mcu_send_firmware in common module 0aee4999902a mt76: mt7663s: introduce WoW support via GPIO 79ebad117325 mt76: switch to wep sw crypto for mt7615/mt7915 af139725193a mt76: fix tkip configuration for mt7615/7663 devices 664e66b35c0b mt76: mt7615: run key configuration in mt7615_set_key for usb/sdio devices f675358267d6 mt76: mt76u: rely on woker APIs for rx work b9f9c16cb1bd mt76: mt76u: use dedicated thread for status work cdeb1b29cd15 mt76: testmode: switch ib and wb rssi to array type for per-antenna report 0a898c0549b6 mt76: testmode: add snr attribute in rx statistics 3ea9a0433bcc mt76: testmode: add tx_rate_stbc parameter 73427ebbbd27 mt76: testmode: add support for LTF and GI combinations for HE mode 88ebccfe8a39 mt76: mt7915: fix tx rate related fields in tx descriptor 9909c0551e4c mt76: testmode: add support for HE rate modes 03ed0909f922 mt76: mt7915: implement testmode tx support 0aa696834a9c mt76: mt7915: implement testmode rx support 5ed3a34b46ce mt76: mt7915: add support to set txpower in testmode f86361654e94 mt76: mt7915: add support to set tx frequency offset in testmode 64a765be750a mt76: mt7915: make mt7915_eeprom_read static 9b48c13b52f7 mt76: mt7915: use BIT_ULL for omac_idx 27227fd57ea7 mt76: mt7915: remove unused mt7915_mcu_bss_sync_tlv() cd795267612d mt76: mt7615: support 16 interfaces 82da525ad0c8 mt76: mt7615: refactor usb/sdio rate code b9a50da503ad mt76: mt7915: rely on eeprom definitions c79d18723df0 mt76: move mt76_init_tx_queue in common code b0b221e91445 mt76: sdio: introduce mt76s_alloc_tx_queue caba5a99e5ae mt76: sdio: rely on mt76_queue in mt76s_process_tx_queue signature 3ed4aad81ce9 mt76: mt7663s: rely on mt76_queue in mt7663s_tx_run_queue signature 216cf8b28579 mt76: dma: rely on mt76_queue in mt76_dma_tx_cleanup signature 0f9350bef1b5 mt76: rely on mt76_queue in tx_queue_skb signature 8932975be066 mt76: introduce mt76_init_mcu_queue utility routine b0eb7edcc624 mt76: rely on mt76_queue in tx_queue_skb_raw signature ccd62467d0f3 mt76: move mcu queues to mt76_dev q_mcu array 2e217fb9e962 mt76: move tx hw data queues in mt76_phy 576647f2ec6a mt76: mt7915: fix endian issues e881fd67c718 mt76: move band capabilities in mt76_phy c728cecd7b77 mt76: rely on mt76_phy in mt76_init_sband_2g and mt76_init_sband_5g 231ef27697f9 mt76: move band allocation in mt76_register_phy 8aa24c91b13b mt76: move hw mac_addr in mt76_phy b436da4d9d92 mt76: mt7915: introduce dbdc support 1e34a02c2dcb mt76: mt7915: get rid of dbdc debugfs knob d8e681bd3268 mt76: mt7615: fix rdd mcu cmd endianness 19c9e277eff6 mt76: mt7915: fix memory leak in mt7915_mcu_get_rx_rate() e361b6a71e4b mt76: improve tx queue stop/wake fb24e5f2305b mt76: mt7915: stop queues when running out of tx tokens 066cc441eb8f mt76: attempt to free up more room when filling the tx queue 93c806a34ec2 mt7915: fix minor issues in the token queue blocking change c017e329a326 mt76: mt7915: ensure that init work completes before starting the device 9e9da427b8a6 mt76: mt7915: fix polling firmware-own status 5cd805ddfb25 mt76: add more conditions for stopping tx scheduling aa893c73bf85 mt76: mt7915; increase txq memory limit for non-DBDC 7915 cards to 32 MiB e44b7c91070e mt76: skip queue stop/wake, rely entirely on txq scheduling 6c6a5c59c101 mt76: mt7915: do not set DRR group for stations 510cb5be1bf7 mt76: usb: remove wake logic in mt76u_status_worker 34f318a25421 mt76: sdio: remove wake logic in mt76s_process_tx_queue 4a90fdf6105e mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: improve skb hash on the mtk ethernet driverFelix Fietkau2020-12-185-25/+35
| | | | | | | | The PPE only provides a 14 bit hash, however many uses of the skb hash expect the hash to use the full 32 bit range. Use jhash to extend the hash to the full size Signed-off-by: Felix Fietkau <nbd@nbd.name>
* nat46: Fix PKG_MIRROR_HASHHauke Mehrtens2020-12-171-1/+1
| | | | | | | The PKG_MIRROR_HASH was not updated when updating the package. Fixes: f75c70aecaca ("nat46: update to latest git HEAD") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: do not enable unused GPIO controllersAdrian Schmutzler2020-12-1727-132/+0
| | | | | | | | Several devices enable GPIO controllers not used in the DTS files. Drop them. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: qca955x: remove redundant phy-modeAdrian Schmutzler2020-12-175-7/+0
| | | | | | | phy-mode is already set to rgmii for eth0 and sgmii for eth1 in qca955x.dtsi, no need to do that again in the device DTS files. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for GL.iNet GL-MT1300Xinfa Deng2020-12-174-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GL-MT1300 is a high-performance new generation pocket-sized router that offers a powerful hardware and first-class cybersecurity protocol with unique and modern design. Specifications: - SoC: MT7621A, Dual-Core @880MHz - RAM: 256 MB DDR3 - Flash: 32 MB - Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN - Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps) - USB: 1 x USB 3.0 port - Slot: 1 x MicroSD card slot - Button: 1 x Reset button - Switch: 1 x Mode switch - LED: 1 x Blue LED + 1 x White LED MAC addresses based on vendor firmware: WAN : factory 0x4000 LAN : Mac from factory 0x4000 + 1 2.4GHz : factory 0x4 5GHz : Mac form factory 0x4 + 1 Flashing instructions: 1.Connect to one of LAN ports. 2.Set the static IP on the PC to 192.168.1.2. 3.Press the Reset button and power the device (do not release the button). After waiting for the blue led to flash 5 times, the white led will come on and release the button. 4.Browse the 192.168.1.1 web page and update firmware according to web tips. 5.The blue led will flash when the firmware is being upgraded. 6.The blue led stops blinking to indicate that the firmware upgrade is complete and U-Boot automatically starts the firmware. For more information on GL-MT1300, see the OFFICIAL GL.iNet website: https://www.gl-inet.com/products/gl-mt1300/ Signed-off-by: Xinfa Deng <xinfa.deng@gl-inet.com> [add input-type for switch, wrap long line in 10_fix_wifi_mac] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: falcon: mark as source only sub targetHauke Mehrtens2020-12-161-1/+1
| | | | | | | | | | The sub target does not support network and there are not so many users out there, just mark it as source only, so we do jot have to build it. The quality is not worse than before, it just does not make much sense to build this automatically. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wireless-regdb: Update to version 2020.11.20Hauke Mehrtens2020-12-161-2/+2
| | | | | | | | | | | | 9efa1da wireless-regdb: update regulatory rules for Egypt (EG) ede87f5 wireless-regdb: restore channel 12 & 13 limitation in the US 5bcafa3 wireless-regdb: Update regulatory rules for Croatia (HR) 4e052f1 wireless-regdb: Update regulatory rules for Pakistan (PK) on 5GHz f9dfc58 wireless-regdb: update 5.8 GHz regulatory rule for GB c19aad0 wireless-regdb: Update regulatory rules for Kazakhstan (KZ) 07057d3 wireless-regdb: update regulatory database based on preceding changes Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: Add IRQSOFF and PREEMPT TRACER kernel config optionHauke Mehrtens2020-12-161-0/+34
| | | | | | | | | | | | | This adds the CONFIG_IRQSOFF_TRACER and the CONFIG_PREEMPT_TRACER kernel configuration option to the OpenWrt menu. This can be used to debug latencies in the system. The CONFIG_PREEMPT_TRACER option needs the CONFIG_PREEMPT option which is supposed to be used for Low-Latency Desktop and not used by many targets in OpenWrt. The help text is copied from the Linux kernel Kconfig. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* util-linux: update to 2.36.1Rosen Penev2020-12-163-30/+4
| | | | | | | | Removed upstream patch. Refreshed other ones. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libunwind: update to 1.5.0Rosen Penev2020-12-163-17/+14
| | | | | | | | | | | | | | Cleanup Makefile for consistency with other ones. Remove PKG_SSP. It can be fixed with -lssp_nonshared. Add PKG_BUILD_PARALLEL for faster compilation. Add zlib dependency. 1.5.0 requires it now. Refresh patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mac80211: Update to version 5.8.18-1Hauke Mehrtens2020-12-1619-218/+38
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: Add TARGET_LDFLAGS to e4cryptHauke Mehrtens2020-12-162-1/+29
| | | | | | The TARGET_LDFLAGS were dropped in the linking of e4crypt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: gcc: Remove support for GCC 5Hauke Mehrtens2020-12-1644-3306/+1
| | | | | | | | | | | | GCC was used in 17.01 as the default compiler the last time. We do not test this old GCC version any more and there are some known problems it fails to compile the U-Boot for the Allwinner A64 SoC. Just remove it to make it clear that we will not support this old GCC version any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Paul Spooren <mail@aparcar.org>
* tools/cmake: update to 3.19.1Hannu Nyman2020-12-153-5/+5
| | | | | | | | Update cmake to version 3.19.1 Release notes: https://cmake.org/cmake/help/v3.19/release/3.19.html Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: bump 5.4 to 5.4.83John Audia2020-12-1519-49/+46
| | | | | | | | | | | | | | | | | | | Manually merged: layerscape/808-i2c-0011-i2c-imx-support-slave-mode-for-imx-I2C-driver.patch layerscape/808-i2c-0012-i2c-imx-correct-code-of-errata-A-010650-for-layersca.patch Remaining modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86/64 [*], ramips/mt7621 [*], ath79/tiny [*], ipq40xx [*], octeon [*], realtek [*] Run-tested: ipq806x/R7800, ramips/mt7621 [*], octeon [*], realtek [*] No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* libnetfilter-conntrack: update to 1.0.8Rosen Penev2020-12-151-9/+8
| | | | | | | | | | Previous git version was 1.0.7. Switched to using tarballs for simplicity. Fixed license information. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* armvirt: README: rename it from LEDE to OpenWrtJosef Schlehofer2020-12-141-1/+1
| | | | Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* armvirt/64: change it to cortex-a53 instead of genericJosef Schlehofer2020-12-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Package architecture aarch64_generic [1] can be used just with three devices. One is NanoPI R2S and then there are two development boards from NXP. Let's change armvirt/64 to Cortex A53 (aarch64_cortex-a53) [2]. It has wider support by multiple devices like NanoPI Neo Plus2/Core2, ESPRESSObin, Pine64, and Raspberry Pi 2&3. While looking at ARMvirt/32 it has set CPU_TYPE and CPU_SUBTYPE to be arm_cortex-a15_neon-vfpv4 [3]. It has support to devices like Linksys EA8500 v1, Linksys EA7500 v1, Netgear D7800, Netgear R7500 and so on. Tested with: qemu-system-aarch64 -m 1024 -smp 2 -cpu cortex-a57 -M virt -nographic \ -kernel openwrt-armvirt-64-Image-initramfs Successfully compiled and booted. Here goes the output: root@OpenWrt:/# uname -a Linux OpenWrt 5.4.82 #0 SMP Sun Dec 13 12:52:10 2020 aarch64 GNU/Linux root@OpenWrt:/# cat /etc/openwrt_release DISTRIB_ID='OpenWrt' DISTRIB_RELEASE='SNAPSHOT' DISTRIB_REVISION='r15207-96fca0f807' DISTRIB_TARGET='armvirt/64' DISTRIB_ARCH='aarch64_cortex-a53' DISTRIB_DESCRIPTION='OpenWrt SNAPSHOT r15207-96fca0f807' DISTRIB_TAINTS='no-all' Also, change BOARDNAME to be the same as it is in armvirt/32. [1] https://openwrt.org/docs/techref/instructionset/aarch64_generic [2] https://openwrt.org/docs/techref/instructionset/aarch64_cortex-a53 [3] https://openwrt.org/docs/techref/instructionset/arm_cortex-a15_neon-vfpv4 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* netifd: update to latest versionNick Hainke2020-12-141-3/+3
| | | | | | 458b1a7e9473 netifd: add segment routing support Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: enable kernel keyring by default on !SMALL_FLASHDaniel Golle2020-12-141-1/+1
| | | | | | | | | | | | | Enable CONFIG_KEYS by default on systems which are not marked as flash-space constraint by the 'small_flash' feature. CONFIG_KEYS is required by Docker, enabling it in our kernel allows users to run Docker on stock OpenWrt. It is also used of by some network file systems (such as NFSv4) to store credentials as well as UID/GID mappings. Adds about 50kB to vmlinux on ath79/generic (~18kB compressed) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: package kmod-keys-encrypted and kmod-keys-trustedDaniel Golle2020-12-141-0/+41
| | | | | | | Add kernel module packages for handling encrypted and TPM trusted keys on the kernel chain. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: update and clean kernel keyring optionsDaniel Golle2020-12-141-13/+13
| | | | | | | | | | Add KERNEL_KEYS_REQUEST_CACHE option. 'tristate' (ie. module builds) are not valid in Config-kernel.in, hence remove tristate KERNEL_ENCRYPTED_KEYS. It will be readded as a kernel module in a follow-up commit. Fixes: 39d817cf38 ("Add config symbols for kernel keyring support") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lantiq: xrx200: remove unused lan/wan labels from dtsAleksander Jan Bajkowski2020-12-1412-13/+13
| | | | | | These labels are not used anywhere and can be removed. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* ath79: add support for the Belkin F9K1115 v2 (AC1750 DB Wi-Fi)Martin Blumenstingl2020-12-143-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device has (almost?) identical hardware to the F9J1108 v2 but uses a different firmware magic and model number. Specifications: SoC: QCA9558 CPU: 720 MHz Flash: 16 MiB NOR RAM: 128 MiB WiFi 2.4 GHz: QCA9558-AT4A 3x3 MIMO 802.11b/g/n WiFi 5 GHz: QCA9880-2R4E 3x3 MIMO 802.11a/n/ac Ethernet: 4x LAN and 1x WAN (all 1Gbit/s ports) USB: 1 x USB 2.0 (lower), 1 x USB 3.0 (upper) MAC addresses based on OEM firmware: Interface Address Location --------- ------- -------- lan *:5A sometimes in 0x6 wan *:5B 0x0 2.4Ghz *:5A 0x1002 5Ghz As per mini PCIe EEPROM Flashing instructions: The factory.bin can be flashed via the Belkin web UI or via the uboot HTTP upgrade page (which is by default listening on 192.168.2.1). Once the factory.bin has been written, sysupgrade.bin will work as usual. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ath79: create shared DTSI/definition for Belkin F9J1108/F9K1115 v2Martin Blumenstingl2020-12-143-225/+238
| | | | | | | | | | | | | | | Belkin F9J1108 v2 and F9K1115 v2 are (seemingly) identical hardware with different model numbers. Extract all non-device specific code to a common .dtsi so it can be re-used when adding support for the F9K1115 v2. Similar to the .dtsi most of the image building recipe code can be re-used. Move everything except the device model, edimax header magic and edimax header model into a shared build recipe. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [drop duplicate TARGET_DEVICES, add EDIMAX_* to DEVICE_VARS, edit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tplink-safeloader: add support for TP-Link CPE510 v3.20Gioacchino Mazzurco2020-12-141-1/+4
| | | | | | | | | | | | | This adds new strings for the v3.20 to the support list of the already supported TP-Link CPE510 v3. The underlying hardware appears to be the same, similar to the situation with CPE210 v3.20 in 4a2380a1e778 ("tplink-safeloader: expand support list for TP-Link CPE210 v3") Signed-off-by: Gioacchino Mazzurco <gio@altermundi.net> [extended commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uclient: update to Git version 2020-12-10Petr Štetiar2020-12-141-4/+4
| | | | | | | | | | | | | | | | | 2c843b2bc04c Add initial GitLab CI support 073f89f567c0 uclient-fetch: wolfSSL: fix certificate validation 086c292160ac uclient-fetch: init_ca_cert: fix memory leak a3c1a88b031a cmake: enable extra compiler checks 32ff717ed316 uclient-http: fix extra compiler warnings on mips_24kc and cortex-a9+neon 86a2ac6ac46f uclient-fetch: fix potential memory leaks 158dd9dd289c uclient: fix initialized but never read variable 66b4420856a7 uclient-fetch: fix statement may fallt hrough 436f9b3af2ad uclient-http: fix freeing of stack allocated memory e6b5b8a98ce2 Fix extra compiler warnings 12df67e45bb0 Add basic cram based unit tests b6e34845124f cmake: fix building out of the tree Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ustream-ssl: update to Git version 2020-12-10Petr Štetiar2020-12-141-4/+4
| | | | | | | | | | | | | | | | | 68d09243b6fd Add initial GitLab CI support 8280140db9d1 wolfssl: remove now deprecated compatibility code cee6791b362a ustream-mbedtls: fix certificate verification 55c3fd89d508 ustream-mbedtls: implement set_require_validation c6b4c48689a3 ustream-openssl: wolfSSL: fix certificate validation 3bc05402bfab cmake: enable extra compiler checks cd2c3d12db43 ustream-mbedtls: fix comparison of integers of different signs 5896991e46a3 ustream-openssl: fix BIO_method memory leak 2c342ae57c5b ustream-openssl: fix wolfSSL includes fa8ecd6ed140 cmake: fix linking when mbed TLS not in default paths 63656f81045f cmake: fix linking when wolfSSL not in default paths c26f71e844df cmake: fix building out of the tree Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build/json: add filesystem informationPaul Spooren2020-12-132-0/+2
| | | | | | | | Some images are created using different filesystems, most popular squashfs and ext4. To allow downstream projects to distinguesh between those, add the `filesystem` information to created json files. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ipq40xx: revert usage of VLAN S-TAGDavid Bauer2020-12-142-37/+9
| | | | | | | | | | | This reverts the usage of the S-Tag for separating LAN and WAN port on the embedded switch. Many users complained about not being able to manage C-Tag addition / removal on the switch as well as degraded performance. Fixes: commit 9da2b567605b ("ipq40xx: fix ethernet vlan double tagging") Signed-off-by: David Bauer <mail@david-bauer.net>
* zram-swap: remove the compression streams settingsRui Salvaterra2020-12-131-15/+0
| | | | | | | | | Zram switched to per-cpu compression streams since Linux 4.7 [1]. Drop the irrelevant configuration (no-op). [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/block/zram?h=v4.7&id=43209ea2d17aae1540d4e28274e36404f72702f2 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm53xx: MR32: fix DEVICE_VENODR typoChristian Lamparter2020-12-131-1/+1
| | | | | | DEVICE_VENDOR was misspelled as DEVICE_VENODR. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: fix 5Ghz tx/rx power on the ASUS MAP-AC2200Yushi Nishida2020-12-131-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | The ASUS MAP-AC2200 suffers from a lower transmit/receive signal power as compared to the stock firmware. Upon investigation, it was discovered that stock firmware from the GPL_MAP-AC2200_3.0.0.4.384.46249-g97d05bb.tar archive. set the following GPIOs in "release/src/router/rc/init.c". GPIO 44 and 46 have to be set to output high GPIO 45 and 47 have to be set to output low Here are some results, after activating the relevant gpios through cmdline: <https://forum.openwrt.org/t/asus-map-ac2200-low-transmit-receive-signal-5ghz/69005/12> THX @ slh Fixes: 9ad3967f140 ("ipq40xx: add support for ASUS Lyra") Signed-off-by: Yushi Nishida <kyro2man@gmx.net> [slightly rewritten commit, added missing <>) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-zynq: fix dtc compilation on host gcc 10Luis Araneda2020-12-131-0/+48
| | | | | | | | | | | | gcc 10 defaults to -fno-common, which causes an error when linking. Back-port the following Linux kernel commit to fix it: e33a814e772c (scripts/dtc: Remove redundant YYLOC global declaration) Tested on an Arch Linux host with gcc 10.1.0 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* odhcpd: remove local mkdir_p implementationDaniel Golle2020-12-131-3/+3
| | | | | | | Replace local mkdir_p implementation in favour of using mkdir_p now added to libubox. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2020-12-121-3/+3
| | | | | | | 111416d jail: remove unreachable code 7f12c89 treewide: replace local mkdir_p implementations Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2020-12-121-3/+3
| | | | | | | | 0c6fb90 jffs2-reset: allow doing a factory reset and passing a sysupgrade.tgz 4862530 mount: restorecon: guard against execl() errors f415323 block: replace local mkdir_p implementation Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 18:24:54 +0000