aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: Move TPLink WPA8630Pv2 to ath79-tiny targetJoe Mullally2022-04-109-42/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | These devices only have 6MiB available for firmware, which is not enough for recent release images, so move these to the tiny target. Note for users sysupgrading from the previous ath79-generic snapshot images: The tiny target kernel has a 4Kb flash erase block size instead of the generic target's 64kb. This means the JFFS2 overlay partition containing settings must be reformatted with the new block size or else there will be data corruption. To do this, backup your settings before upgrading, then during the sysupgrade, de-select "Keep Settings". On the CLI, use "sysupgrade -n". If you forget to do this and your system becomes unstable after upgrading, you can do this to format the partition and recover: * Reboot * Press RESET when Power LED blinks during boot to enter Failsafe mode * SSH to 192.168.1.1 * Run "firstboot" and reboot Signed-off-by: Joe Mullally <jwmullally@gmail.com> Tested-by: Robert Högberg <robert.hogberg@gmail.com> (cherry picked from commit 44e1e5d153d00915a7e516c9af3f440cbd84cf78)
* dropbear: bump to 2022.82Konstantin Demin2022-04-109-66/+90
| | | | | | | | | | | | | | | | | | | | | | | - update dropbear to latest stable 2022.82; for the changes see https://matt.ucc.asn.au/dropbear/CHANGES - use $(AUTORELEASE) in PKG_RELEASE - use https for all uris - refresh all patches - rewrite patches: - 100-pubkey_path.patch - 130-ssh_ignore_x_args.patch binary/pkg size changes: - ath79/generic, mips: - binary: 215112 -> 219228 (+4116) - pkg: 111914 -> 113404 (+1490) - ath79/tiny, mips: - binary: 172501 -> 172485 (-16) - pkg: 89871 -> 90904 (+1033) Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Konstantin Demin <rockdrilla@gmail.com> (cherry picked from commit 65256aee23a5104eb0c78411fdc73640c0b757ea)
* libmnl: update to 1.0.5Nick Hainke2022-04-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: Duncan Roe (5): nlmsg: Fix a missing doxygen section trailer build: doc: "make" builds & installs a full set of man pages build: doc: get rid of the need for manual updating of Makefile build: If doxygen is not available, be sure to report "doxygen: no" to ./configure src: doc: Fix messed-up Netlink message batch diagram Fernando Fernandez Mancera (1): src: fix doxygen function documentation Florian Westphal (1): libmnl: zero attribute padding Guillaume Nault (1): callback: mark cb_ctl_array 'const' in mnl_cb_run2() Kylie McClain (1): examples: nfct-daemon: Fix test building on musl libc Laura Garcia Liebana (4): examples: add arp cache dump example examples: fix neigh max attributes examples: fix print line format examples: reduce LOCs during neigh attributes validation Pablo Neira Ayuso (3): doxygen: remove EXPORT_SYMBOL from the output include: add MNL_SOCKET_DUMP_SIZE definition build: libmnl 1.0.5 release Petr Vorel (1): examples: Add rtnl-addr-add.c Stephen Hemminger (1): examples: rtnl-addr-dump: fix typo igo95862 (1): doxygen: Fixed link to the git source tree on the website. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit c3b738933981de601389794152534628b04555dc)
* libnfnetlink: update to 1.0.2Nick Hainke2022-04-102-23/+3
| | | | | | | | | | | | | | | | | | | | | | | | Changes: c63f193 bump version to 1.0.2 3cffa84 libnfnetlink: Check getsockname() return code 90ba679 include: Silence gcc warning in linux_list.h bb4f6c8 Make it clear that this library is deprecated e46569c Minimally resurrect doxygen documentation 5087de4 libnfnetlink: hide private symbols 62ca426 autogen: don't convert __u16 to u_int16_t efa1d8e src: Use stdint types everywhere 7a1a07c include: Sync with kernel headers 7633f0c libnfnetlink: initialize attribute padding to resolve valgrind warnings 94b68f3 configure: uclinux is also linux 617fe82 src: get source code license header in sync with current licensing terms 97a3960 build: resolve automake-1.12 warnings Removed the patch 100-missing_include.patch, libnfnetlink compiles fine with musl without this patch. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit aecf088b3792d556c717510304729fa542ceb770)
* gpio-button-hotplug: fix data raceAndrey Erokhin2022-04-101-1/+1
| | | | | | | | bh_event_add_var can be called by multiple threads concurrently, so it shall not use a static char buffer Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com> (cherry picked from commit 1e991e09b73c309321d21b9cb706bd5139d952d2)
* tools/meson: update to 0.61.4Rosen Penev2022-04-104-2/+6
| | | | | | | | Override python to use the one in host instead of hostpkg. There's no need to use the latter. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 19f3fcc884cab348cfba823f1175baf7aa4de15f)
* tools/cmake: fix download urlleo chung2022-04-101-1/+1
| | | | | | | fix the cmake.org download url Signed-off-by: leo chung <gewalalb@gmail.com> (cherry picked from commit 56f091d4677feb693d37959a3fa4af845dcce82e)
* libselinux: add missing host-build dependency on libsepol/hostDaniel Golle2022-04-101-1/+1
| | | | | | | | | The host-build of libselinux requires libsepol/host. Add the libsepol/host to HOST_BUILD_DEPENDS to allow build on hosts which don't have libsepol installed. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 0d3850dc5af4896ab3679dc4d8ef9a664e5e705f)
* dnsmasq: add procd interface index trackingValentyn Datsko2022-04-101-0/+5
| | | | | | | | | | | | | | Problem exist when dnsmasq is exclusively bind to particular interface. After reconfiguring or restarting this interface, its index changes, but dnsmasq uses the old one. When this problem occurs, dnsmasq does not listen on the correct interface so DHCP does not work, and clients do not get an IP address. Procd netdev param can be added to restart dnsmasq when the interface index is changed. Signed-off-by: Valentyn Datsko <valikk.d@gmail.com> [combined into a single &&-connected statement] Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 76f55e3c3f32dea63a385e9b3c8eaed1322089c7)
* libselinux: use musl-fts for host buildsRosen Penev2022-04-101-2/+5
| | | | | | | | | Fixes compilation under musl based distros like Alpine Linux. Also add pcre/host as a build dependency as it's needed. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit abb2683de36ffe7b29a1b6ea5a8d7edf73719152)
* at91: Automatically detect USB featureHauke Mehrtens2022-04-071-1/+1
| | | | | | | | | | | The sama7 sub target does not have USB support, the feature should not be activated there. OpenWrt can automatically detect if the target supports USB by using the scripts/target-metadata.pl script. With the automatic detection USB support will only get activated on subtargest which actually support USB like sam9x and sama5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit f6d566301ee3dc12fd41e131f89dfc4777b002f3)
* at91/sama7: Do not build in BluetoothHauke Mehrtens2022-04-071-6/+0
| | | | | | | | | | Bluetooth should be activated as an optional kmod package instead of compiling it into the kernel. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 3296881a1d631bc6db38fe72ab73adaa27af6f8c)
* at91/sama7: Use ext4 driver for ext2 and ext3Hauke Mehrtens2022-04-071-6/+0
| | | | | | | | | | Use the ext4 driver for ext2 and ext3 too. This feature is activated in the OpenWrt generic configuration. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 6709b67265d04ee82b1e79e2a6c8eaeca9d5dfe4)
* at91/sama7: Deactivate certification and key systemHauke Mehrtens2022-04-071-16/+0
| | | | | | | | | | This was probably activated by mac80211 which was activated before. mac80211 is build from backports in OpenWrt. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit ac2bc4b893999709776bc93c46e907147aef3a44)
* at91/sama7: Do not activate cgroups and namespacesHauke Mehrtens2022-04-071-17/+0
| | | | | | | | | | cgroups and namespaces should be configured by the generic OpenWrt configuration and not for a specific target. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit a2f1db99f62554699b30de5d379f5b16c1138f41)
* at91/sama7: Remove config options build as moduleHauke Mehrtens2022-04-071-38/+2
| | | | | | | | | | | | | | Remove the configuration options which are building modules for the sub target configuration. These kernel modules are not packaged. Kernel options should only be build as a module when they are selected by a kmod package and not by setting them to =m in the target kernel configuration. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 5a84a8764d9f6e753eb6f11f214b0a3e5cb5ff80)
* kernel: bump 5.10 to 5.10.109Hauke Mehrtens2022-04-073-9/+9
| | | | | | | | | Patches automatically rebased. Compile-tested: lantiq/xrx200 Run-tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* scripts: make sure sort-order is independent from localeDaniel Golle2022-04-061-1/+1
| | | | | | | | | Set LC_ALL=C environment variable when calling 'sort' as the sort order otherwise depends on the locale set. Fixes: 56ce110b73 ("scripts: make sure conffiles are sorted") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 1d77dca3b32dd883bcc2213675cf21111ac1beca)
* kernel: set SOURCE_DATE_EPOCH for initramfs root dirDaniel Golle2022-04-061-1/+1
| | | | | | | | | Make sure the timestamp of the root directory of the initramfs is set to SOURCE_DATE_EPOCH as well. Fixes: 29d7461d11 ("kernel: set options to make external initramfs reproducible") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 54bcf586b0beb510345fdbac731ce1c04b6fa56b)
* build: store sha256_unsigned in JSONPaul Spooren2022-04-063-7/+16
| | | | | | | | | | | | | Introduce `sha256_unsigned` which is a checksum of the image _before_ a signature is attached. This is helpful to compare image reproducibility. Since the `.sha256sum` file is located in the $(KDIR) folder, switch $(BIN_DIR) with $(KDIR) to simplify the code. The value of $(BIN_DIR) itself is not stored inside the resulting JSON file, so it can be replaced. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 8822a8d850ba2df69b81289758959bb90643a696)
* kernel: fix initramfs reproducibilityDaniel Golle2022-04-061-1/+1
| | | | | | | | | | Make sure xz uses at least 2 threads so compression always runs in multi-threaded mode as the resulting file in single-threaded mode differs. Fixes: 29d7461d11 ("kernel: set options to make external initramfs reproducible") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit fc6a83e63b187ecfd0e427c062ae09e3c104e291)
* image: let mksquashfs4 use all processorsStijn Tintel2022-04-061-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Drop the -processors argument from the mksquashfs4 call, so it will use all available processors. This dramatically reduces the time to create squashfs filesystems. The times below are observed when building an image for my main router, the WatchGuard Firebox M300 (qoriq target): Before: real 4m45,973s After: real 0m23,497s With this commit `mksquashfs` may use more cores than defined via `-j`. This is the same behaviour as for archive creation of ImageBuilder, SDK or toolchain. There is no trivial way to limit `mksquashfs` CPU core usage to the amount of "free" make jobs since two running `mksquashfs` instances would each run with the total allowed number (-j) of threads. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> [extended reasoning in commit message] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit df2ae8826ced4f374bcb693b44d8a113ad150d70)
* scripts: make sure conffiles are sortedPaul Spooren2022-04-061-1/+2
| | | | | | | | | | It may happen that conffiles are in different order on different builds. Make sure they have the same order by sorting them. FIX: #9612 Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 56ce110b73970bcd65d309440baada84c8e1504b)
* toolchain: reproducible libstdcppPaul Spooren2022-04-061-1/+2
| | | | | | | | A Python script containing an unreproducible path is copied by default. Remove it before generating the package. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 950bd40a275d1a834c95d8f9830e1bfed4737a82)
* grub2: add missing licensePaul Spooren2022-04-051-1/+3
| | | | | | | | The PKG_LICENSE field was missing. While at it, normalize the Makefile a bit. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 839b1ff1fc0d6bcd74131a78fb9286df7f3b7b97)
* qoriq: enable support for Marvell Alaska PHYsStijn Tintel2022-04-051-0/+1
| | | | | | | | | The WatchGuard Firebox M200 and M300 use a Marvell 88e1543 PHY for the first 3 ethernet ports. This PHY is supported by the Marvell Alaska PHY driver, so enable it. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit d7eba8059b3bfe89f90f1d18f1f0d23cbbb42423)
* kernel: load device-mapper early on bootDaniel Golle2022-04-051-1/+1
| | | | | | | | | | Previously commit openwrt/packages@3abb7cb ("lvm2: Added script and updated Makefile[...]") couldn't actually work and allow rootfs_data to be stored on a LVM2 as the necessary kernel modules had not been loaded at this point. Fix this by loading device-mapper modules early at boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 82f9ad6ab21ca4925278429a3e1b31d26c306d9f)
* kernel: modules: drop 'AddDepends/bluetooth' callsPiotr Dymacz2022-04-051-2/+0
| | | | | | | Function 'AddDepends/bluetooth' doesn't exist in our codebase. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 173198e35a898ff7ec97749247f75cd82fa3c3ab)
* busybox: Fix snprintf arguments in lockHauke Mehrtens2022-04-051-1/+1
| | | | | | | | | | The first argument for snprintf is the buffer and the 2. one is the size. Fix the order. This broke the lock application. Fixes: 9d2b26d5a705 ("busybox: fix busybox lock applet pidstr buffer overflow") Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d80336e1a970b088c235dcf2773052537e6f5d72)
* busybox: fix busybox lock applet pidstr buffer overflowQichao Zhang2022-04-051-3/+3
| | | | | | | | | | | Kernel setting `/proc/sys/kernel/pid_max` can be set up to 4194304 (7 digits) which will cause buffer overflow in busbox lock patch, this often happens when running in a rootfs container environment. This commit enlarges `pidstr` to 12 bytes to ensure a sufficient buffer for pid number and an additional char '\n'. Signed-off-by: Qichao Zhang <njuzhangqichao@gmail.com> (cherry picked from commit 34567750db2c3a84fc9f971189c223e2eefd93b0)
* build: autotools: fix cache pathHuangbin Zhan2022-04-051-1/+1
| | | | | | | | the cache directory should be autom4te.cache in all $(PKG_AUTOMAKE_PATHS) rather than $(PKG_BUILD_DIR)/autom4te.cache only Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com> (cherry picked from commit 044ca149f36a08f56fe827a20aa113837c58cb40)
* pcre: disable shared libraries for host buildsRosen Penev2022-04-051-0/+1
| | | | | | | | | Getting rid of shared libraries for hostpkg avoids having to use rpath hacks to find the library. It also fixes compilation with host glib2 binaries. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit f8571749a77ea23b418c84692220083858c1df79)
* musl-fts: remove shared libraries from hostRosen Penev2022-04-051-0/+1
| | | | | | | | | Avoids having to add rpath to the various packages using it. Also add PIC to fix compilation as static libraries do not use PIC by default. Fixes: 1fb099341e58 ("musl-fts: add host build") Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 8a75ed4ba07b9d64ae547ce36873e51ba54f0eaf)
* kernel: mark CONFIG_PSTORE_COMPRESS_DEFAULT as "is not set"Christian Lamparter2022-04-051-1/+1
| | | | | | | | | # CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" this can lead to confusion. Thankfully, in the KConfig world this setting is still interpreted as disabled. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit de4879c1ae92bf625a91ff3f07a65ec0e4bb8ed1)
* ipq40xx: add support for FRITZ!Box 7520Andre Heider2022-04-051-0/+2
| | | | | | | | | | | | | | This model, also know as "1&1 HomeServer", shares the same features as 7530. The vendor firmware has artificial software limitations: only 2 of the 4 LAN-Ports are GBit, and the USB-Host is only v2.0. With OpenWrt, USB is already working at v3.0. Signed-off-by: Andre Heider <a.heider@gmail.com> (updated commit message to reflect current state) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit cb6f4be13703f0224fc462caaeac14e725c72986)
* gettext-full: add gmsgfmt symlink in host installStijn Tintel2022-04-051-0/+5
| | | | | | | | | | | | | | | Some configure scripts look for msgfmt and gmsgfmt. As we don't install the latter, configure might pick up one from staging_dir/hostpkg, and the other from the host: checking for msgfmt... /home/stijn/Development/OpenWrt/openwrt/staging_dir/hostpkg/bin/msgfmt checking for gmsgfmt... /usr/bin/gmsgfmt This could potentially lead to hard to debug undefined behaviour. Install a symlink in the host install phase to avoid this. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 636cb00ecc8d693c36e48952f6d154f91e0e569e)
* uboot-mvebu: backport patch to fix eMMCRobert Marko2022-04-051-0/+64
| | | | | | | | | | | v2022.01 has a regression that broke eMMC usage on most if not all Armada SoC-s, thus breaking boards like uDPU which use eMMC for storage. Fix it by backporting a recent upstream patch. Fixes: 782d4c8306c8 ("uboot-mvebu: update to version 2022.01") Signed-off-by: Robert Marko <robert.marko@sartura.hr> (cherry picked from commit a70383080694f26d13db8341a83261f6b1c45f12)
* Revert "octeon: mark source-only"Stijn Tintel2022-04-031-1/+1
| | | | | | | | | | The memory leak is fixed by the kernel patches backported in the previous commit. This reverts commit 1fa8780056a8c7a2e26c8b4d5e6979232f117349. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit f6cda9f06b09c94457e838a28ef300b2f3c6be77)
* kernel: backport pgalloc memory leak fixStijn Tintel2022-04-032-0/+96
| | | | | | | | Backport a fix for the massive memory leak observed in Octeon after switching to kernel 5.10. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 9283359bd53a889a270da4a7d5bbe3eaaa771e70)
* octeon: mark source-onlyStijn Tintel2022-04-011-1/+1
| | | | | | | | There is a hard to reproduce, even harder to track down memory leak in Octeon since kernel 5.10. Mark octeon source-only until it is plugged. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 1fa8780056a8c7a2e26c8b4d5e6979232f117349)
* ath79: migrate Archer C5 5GHz radio device pathsJan-Niklas Burfeind2022-03-311-0/+1
| | | | | | | | | | | | When upgrading a TP-Link Archer C5 v1 from ar71xx to ath79, the 5ghz radio stops working because the device path changed. Same has been done for the Archer C7 before: commit e19506f20618 ("ath79: migrate Archer C7 5GHz radio device paths") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit c6eb63d48f942f1e54737ed182776cf9a08de542)
* ath79: fix label MAC address for Ubiquiti UniFi AP Outdoor+Matthias Schiffer2022-03-303-2/+4
| | | | | | | | | | The label has the MAC address of eth0, not the WLAN PHY address. We can merge the definition back into ar7241_ubnt_unifi.dtsi, as both DTS derived from it use the same interface for their label MAC addresses after all. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit aee9ccf5c1b536189ebee8c232273657334da843)
* realtek: Fix tc default packageHauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | | The tc package does not exits any more, it was split into tc-tiny, tc-full and tc-bpf. Include tc-bpf by default into realtek images. This increases the compressed image size by about 232KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 34fb36e165d5b6e6e37d33b4b0da789a8f1430bb)
* realtek: Use firewall4Hauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | The realtek target is not a router, but basic device, see DEVICE_TYPE. The basic device type does not come with firewall by default, see include/target.mk for details. The realtek target extended DEFAULT_PACKAGES manually with firewall. This changes the defaults to take firewall4 and nftables instead of firewall and iptables. This also adds the additional package kmod-nft-offload. The only difference to the router type is the missing ppp, ppp-mod-pppoe, dnsmasq and odhcpd-ipv6only package. This increases the compressed image size by about 422KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 469030659c5cb140bdbff1b3d8fc9691f98f984b)
* realtek: Remove dnsmasq and odhcpd-ipv6only from defaultHauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | | | Do not include the dnsmasq and odhcpd-ipv6only package by default any more. These services are not needed on a switch. If someone needs this it is still possible to use opkg or image builder to add them. This decreases the compressed image size by about 165KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 2acebbdcaafbdfd3f677052c28bc0af04c6b5ab8)
* ipq40xx: WAC510: device-tree overhaulingChristian Lamparter2022-03-272-40/+33
| | | | | | | | | | removes usb-port remains as neither the WAC510 nor the WAC505 come with a USB port. Update the LED properties to phase out labels and introduce generic node-names as well as adding the color, function and function-enumerator properties. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 026fda10a5c45d56fd856628b6e9e69b95fd5e58)
* lantiq: xrx200: replace patch with upstream versionAleksander Jan Bajkowski2022-03-275-101/+402
| | | | | | | | | | | | This commit replaces patch number 0703 with the upstream accepted version. This patch requires backporting an additional patch to avoid conflicts. The only significant change is the lower maximum MTU. Packets with lengths over 2400 may be dropped. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit b4970dab6b0c3e13715f4b13de42d72a74c1c9e9)
* uqmi: fix acquiring PIN statusDaniel Golle2022-03-271-4/+8
| | | | | | | | | | | | | Evaluating the return value of 'json_load' didn't work in the intended way resulting in PIN status no longer being read on modems where --get-pin-status doesn't fail. Fix this by trying --get-pin-status first and checking if pin1_status field exists in JSON, and if it doesn't try again with --uim-get-sim-state. Fixes: #9501 Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ee7cb5e885118b78fb5f692d8ed6c93bb7e35853)
* kernel: bump 5.10 to 5.10.108Rui Salvaterra2022-03-278-17/+17
| | | | | | | | | | | | | | | | | Patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Tested-by: John Audia <graysky@archlinux.us> Build-tested: ath79/generic, ramips/mt76{20,21,x8}, ipq40xx, mvebu, realtek/rtl{838,930}x, x86/64 Run-tested: ramips/mt7621, mvebu Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit 2c26eb4e484fe6d7a8159a22f97b6db7ca6e9221)
* x86: Add support for Sophos XG 85 and XG 86 devicesRaylynn Knight2022-03-272-2/+3
| | | | | | | | | | | | | This commit builds on previous efforts to add support for Sophos devices. * Add support for Sophos XG 85 with/without wireless * Add support for Sophos XG 86 with/without wireless Tested on Sophos XG 85w rev1 and XG 86 rev 1 Signed-off-by: Raylynn Knight <rayknight@me.com> (cherry picked from commit c7bcbcd49280a79b287cc072cd0ca7de777a7ac4)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 00:47:07 +0000