aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: fix crashes on MIPS when loading kernel modules under memory pressureFelix Fietkau2017-02-152-2/+8
| | | | | | | | | | | When memory is tight, modules may need to be loaded into vmalloc() space. The code then has to generate jump trampolines which enable relocations between vmalloc space and physical address space. The code had a bug that was freeing these trampolines even when the module was successfully loaded. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mdns: update and rename package to the umdnsRafał Miłecki2017-02-154-24/+24
| | | | | | | | | | | | | | This update includes numerous small fixes for: 1) Interfaces setup 2) Packets parsing 3) Sending replies Without this there were multiple problems with exchanging information between (u)mdns and other implementations (including (u)mdns as well). This also follows project rename to umdns which was required to avoid confusion with Apple's mdnsd from mDNSResponder project. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: fix DEFAULT_PACKAGES for mikrotik devicesFelix Fietkau2017-02-151-1/+2
| | | | | | Include packages from the default profile for NAND devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add buildbot specific config option for setting defaultsFelix Fietkau2017-02-155-5/+20
| | | | | | | | | | This can be used to tweak the buildbot behavior without having to change buildbot's configuration. It will also allow us to add more aggressive clean steps (e.g. on toolchain changes), which would break developers' workflows if enable by default. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: patch-image: fix file descriptor leak.Furong Xu2017-02-151-4/+0
| | | | | | Maybe this is committed by mistake, fix it. Signed-off-by: Furong Xu <xfr@outlook.com>
* octeon: only copy sysupgrade file if presentJohn Crispin2017-02-151-1/+1
| | | | | | | | | | this caused 'mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory' when running sysupgrade -n Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: Add missing device package om-watchdog for MR1750Sven Eckelmann2017-02-151-1/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add OpenMesh A40 to OpenMesh A60 profileSven Eckelmann2017-02-151-1/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: extract ath10k wifi board.bin for the OpenMesh A40 boardSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh A40 supportSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/om-watchdog: add OpenMesh A40 supportSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: enable sysupgrade for the OpenMesh A40Sven Eckelmann2017-02-152-0/+3
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add user-space support for the OpenMesh A40Sven Eckelmann2017-02-154-0/+11
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add kernel support for the OpenMesh A40 boardSven Eckelmann2017-02-153-1/+23
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: create profile and build image for the OpenMesh A60 boardSven Eckelmann2017-02-152-0/+8
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: extract ath10k wifi board.bin for the OpenMesh A60 boardSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh a60 supportSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/om-watchdog: add OpenMesh A60 supportSven Eckelmann2017-02-151-1/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: enable sysupgrade for the OpenMesh A60Sven Eckelmann2017-02-152-1/+8
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* scripts/om-fwupgradecfg-gen.sh: add support for the A60Sven Eckelmann2017-02-151-2/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add user-space support for the OpenMesh A60Sven Eckelmann2017-02-154-0/+11
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add kernel support for the OpenMesh A60 boardSven Eckelmann2017-02-155-0/+173
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 supportSven Eckelmann2017-02-151-1/+3
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/om-watchdog: add OpenMesh OM2Pv4/-HSv4 supportSven Eckelmann2017-02-151-0/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: enable sysupgrade for the OpenMesh OM2Pv4/-HSv4Sven Eckelmann2017-02-152-0/+6
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add user-space support for the OpenMesh OM2Pv4/-HSv4Sven Eckelmann2017-02-154-0/+12
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: add kernel support for the OpenMesh OM2Pv4/-HSv4Sven Eckelmann2017-02-153-0/+97
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: Remove the v2/v3 from the OpenMesh profile namesSven Eckelmann2017-02-151-4/+4
| | | | | | | The list of v2/v3 devices is getting longer and makes reading the names of the profiles unnecessary hard. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* procd: fix default timeout for reload trigger actionsDenis Osvald2017-02-151-5/+2
| | | | | | | | | | | | | Default trigger action timeout was added to procd.sh in commit f88e3a4c0 (procd: add default timeout for reload trigger actions) However, the timeout value was not placed under the correct JSON-script array nesting level and thus did not apply. To fix this and make the timeout actually apply to the reload triggers, we place it in the correct scope, that is the per-trigger array. Fixes: f88e3a4c0abb60bb76a7678dd30dfdc8a808a2f1 Signed-off-by: Denis Osvald <denis.osvald@sartura.hr>
* mvebu: append metadata to clearfog sd card imagesJonas Gorski2017-02-131-1/+1
| | | | | | | | | | | | | | Fixes the following issue: root@LEDE:/# sysupgrade /tmp/lede-mvebu-armada-388-clearfog-sdcard.img.gz Saving metaconfig... Image metadata not found Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware Image check 'fwtool_check_image' failed. root@LEDE:/# Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: Neufbox 6: fix switch by probing through DTJonas Gorski2017-02-1338-200/+128
| | | | | | | | | | | | Probe the switch through DT instead of a platform device. This fixes probe, as GPIO offsets are now properly accounted for. Fixes the following issue: [ 0.802953] 8021q: 802.1Q VLAN Support v1.8 [ 0.810518] rtl8366_smi: gpio_request failed for 18, err=-517 Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* sdk: clean scripts/config before packing tarball (FS#504)Felix Fietkau2017-02-131-0/+1
| | | | | | | Avoids shipping potentially incompatible object files and also reduces the tarball size Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: added image size into dwr-512 DTGiuseppe Lippolis2017-02-131-0/+1
| | | | Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* layerscape: fix adjust_link for 10G & 2.5GYangbo Lu2017-02-131-0/+48
| | | | | | Added a linux-4.4 patch to fix adjust_link for 10G & 2.5G. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ramips: Correct switch configuration for Newifi D1Chuanhong Guo2017-02-131-4/+1
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* lantiq: fix patching the wifi mac address on BTHOMEHUBV3AMartin Blumenstingl2017-02-131-1/+1
| | | | | | | | | | | | | | | | | | | The firmware hotplug script tries to read the mac address from a partition with the name "uboot-env" which does not exist (instead it's name is uboot_env). This broke calculation of the new checksum (after patching the mac address) which resulted in ath9k refusing to use the EEPROM data. The original error reported by ath9k was: PCI: Enabling device 0000:00:0e.0 (0000 -> 0002) ath: phy0: Bad EEPROM checksum 0x2523 ath: phy0: Unable to initialize hardware; initialization status: -22 ath9k 0000:00:0e.0: Failed to initialize device Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings binding/owl-loader") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ath9k: fix various issues in the airtime-fairness implementationFelix Fietkau2017-02-122-1/+108
| | | | | | | Effects of the bugs could include memory corruption, tx hangs, kernel crahes, possibly other things as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatchHauke Mehrtens2017-02-121-0/+35
| | | | | | | This backports the following fix to our mips IRQ stack patches: https://patchwork.linux-mips.org/patch/15110/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm63xx: fix lzma loader for BCM6362Jonas Gorski2017-02-101-1/+1
| | | | | | | | BCM6362 and BCM3380 seem to share the same PRID. Disable serial output for them until we can find a way to tell them apart reliably. Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: do a full reset phy cycleJonas Gorski2017-02-101-0/+28
| | | | | | Make sure we do a proper reset of the phy, if the phy reset is defined. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: fix external interrupts on BCM6318Jonas Gorski2017-02-102-8/+21
| | | | | | | | Setting the clear bit for an interrupt seems to cause interrupts to be deasserted again immediately. So unset the bit for BCM6318 to allow subsequent interrupts to still work. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* odhcpd: update to git HEAD version (FS#396)Hans Dedecker2017-02-091-3/+3
| | | | | | | | | 8df4253 ndp: harden netlink event socket error handling b02f3e6 ndp: close proc file descriptor also during error handling 8a615ad npd: rework IPv6 relay logic (FS#396) 0129f79 config: restore interface defaults when cleaning interface Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: update to git HEAD version (FS#388)Hans Dedecker2017-02-091-5/+5
| | | | | | | | 3317c86 dhcpv6-ia: apply lease delete based on assignment bound state df50429 odhcpd: properly handle netlink messages (FS#388) 83d72cf odhcpd: fix coding style Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* arc770: backport upstream fix for unaligned accessAlexey Brodkin2017-02-092-31/+38
| | | | | | | | | | | | | | | | | This commit reverts 42f3c1f ("arc770: fix broken upstream change") and simultaneously adds back-ported fix from Linus' tree: a524c218bc94 ("ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixup"). Note mentioned patch will appear in stable trees soon as well so IMHO there's not much sense in adding this separate patch in lede/master branch. As well as we will get rid of it here in 17.01 once we bump 4.4 kernel here later down the line. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
* procd: update to latest git HEADJohn Crispin2017-02-081-3/+3
| | | | | | cdc3dab ujail: fix signal forwarding Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix AR670W partition alignmentClaudio Leite2017-02-081-1/+1
| | | | | | | mtdsplit_lzma requires that the rootfs be aligned to a block boundary. Pad the kernel partition to make this so. Signed-off-by: Claudio Leite <leitec@gmail.com>
* brcmfmac: improve Raspberry Pi 3 stabilityÁlvaro Fernández Rojas2017-02-072-2/+25
| | | | | | | - Really disable power management (wrong config flags). - Disable internal roaming engine. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm53xx: add missing system.sh includeRafał Miłecki2017-02-071-0/+1
| | | | | | | It's needed for macaddr_add. Fixes: 5ed23223fd1f ("bcm53xx: set WAN MAC address to don't share one with LAN interface") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* arc770: fix broken upstream changeJo-Philipp Wich2017-02-071-0/+31
| | | | | | | Add a patch to revert upstream commit 9aed02feae57bf7a40cb04ea0e3017cb7a998db4 which introduces syntax errors. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tcpdump: update to version 4.9.0Hauke Mehrtens2017-02-064-81/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following 41 security problems: + CVE-2016-7922: buffer overflow in print-ah.c:ah_print(). + CVE-2016-7923: buffer overflow in print-arp.c:arp_print(). + CVE-2016-7924: buffer overflow in print-atm.c:oam_print(). + CVE-2016-7925: buffer overflow in print-sl.c:sl_if_print(). + CVE-2016-7926: buffer overflow in print-ether.c:ethertype_print(). + CVE-2016-7927: buffer overflow in print-802_11.c:ieee802_11_radio_print(). + CVE-2016-7928: buffer overflow in print-ipcomp.c:ipcomp_print(). + CVE-2016-7929: buffer overflow in print-juniper.c:juniper_parse_header(). + CVE-2016-7930: buffer overflow in print-llc.c:llc_print(). + CVE-2016-7931: buffer overflow in print-mpls.c:mpls_print(). + CVE-2016-7932: buffer overflow in print-pim.c:pimv2_check_checksum(). + CVE-2016-7933: buffer overflow in print-ppp.c:ppp_hdlc_if_print(). + CVE-2016-7934: buffer overflow in print-udp.c:rtcp_print(). + CVE-2016-7935: buffer overflow in print-udp.c:rtp_print(). + CVE-2016-7936: buffer overflow in print-udp.c:udp_print(). + CVE-2016-7937: buffer overflow in print-udp.c:vat_print(). + CVE-2016-7938: integer overflow in print-zeromq.c:zmtp1_print_frame(). + CVE-2016-7939: buffer overflow in print-gre.c, multiple functions. + CVE-2016-7940: buffer overflow in print-stp.c, multiple functions. + CVE-2016-7973: buffer overflow in print-atalk.c, multiple functions. + CVE-2016-7974: buffer overflow in print-ip.c, multiple functions. + CVE-2016-7975: buffer overflow in print-tcp.c:tcp_print(). + CVE-2016-7983: buffer overflow in print-bootp.c:bootp_print(). + CVE-2016-7984: buffer overflow in print-tftp.c:tftp_print(). + CVE-2016-7985: buffer overflow in print-calm-fast.c:calm_fast_print(). + CVE-2016-7986: buffer overflow in print-geonet.c, multiple functions. + CVE-2016-7992: buffer overflow in print-cip.c:cip_if_print(). + CVE-2016-7993: a bug in util-print.c:relts_print() could cause a buffer overflow in multiple protocol parsers (DNS, DVMRP, HSRP, IGMP, lightweight resolver protocol, PIM). + CVE-2016-8574: buffer overflow in print-fr.c:frf15_print(). + CVE-2016-8575: buffer overflow in print-fr.c:q933_print(). + CVE-2017-5202: buffer overflow in print-isoclns.c:clnp_print(). + CVE-2017-5203: buffer overflow in print-bootp.c:bootp_print(). + CVE-2017-5204: buffer overflow in print-ip6.c:ip6_print(). + CVE-2017-5205: buffer overflow in print-isakmp.c:ikev2_e_print(). + CVE-2017-5341: buffer overflow in print-otv.c:otv_print(). + CVE-2017-5342: a bug in multiple protocol parsers (Geneve, GRE, NSH, OTV, VXLAN and VXLAN GPE) could cause a buffer overflow in print-ether.c:ether_print(). + CVE-2017-5482: buffer overflow in print-fr.c:q933_print(). + CVE-2017-5483: buffer overflow in print-snmp.c:asn1_parse(). + CVE-2017-5484: buffer overflow in print-atm.c:sig_print(). + CVE-2017-5485: buffer overflow in addrtoname.c:lookup_nsap(). + CVE-2017-5486: buffer overflow in print-isoclns.c:clnp_print(). The size of the package is only incread very little: new size: 306430 tcpdump_4.9.0-1_mips_24kc.ipk 130324 tcpdump-mini_4.9.0-1_mips_24kc.ipk old size: 302782 tcpdump_4.8.1-1_mips_24kc.ipk 129033 tcpdump-mini_4.8.1-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 15:08:07 +0000