aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: ubnt-(xm,xw): add rssileds packageLech Perczak2019-11-211-2/+8
| | | | | | | | | | | | | | | | | | In order to make RSSI indicator on the device work out of box, include "rssileds" package in per-device rootfs image by default for Ubiquiti XM and XW devices, namely: - Bullet M (XM/XW) - Rocket M (XM/XW) - Nanostation M (XM/XW) - Nanostation Loco-M (XW) This moves the package addition to the individual devices in order to prevent accidental inclusions of the package when not looking at the parent node carefully enough. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [add bullet-m-xw, remove rocket-m-ti, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add PoE passthrough switch for Ubiquiti Nanostation (XM/XW)Adrian Schmutzler2019-11-211-0/+6
| | | | | | | | | | | | | This adds the gpio switch to enable PoE passthrough on Ubiquiti Nanostation (XM/XW). Values are copied from the implementation in ar71xx. GPIO values checked on: - NanoStation M5 XW - NanoStation M2 XM Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-mvebu: add uDPU boardVladimir Vid2019-11-212-2/+22
| | | | | | | | | | * add u-boot support for uDPU * add line to copy u-boot binary to STAGING_DIR_IMAGE, this can later be used as BL33 variable required for ATF build * add patch to increase max gunzip size in mvebu_armada-37xx.h which is required for booting the itb recovery images Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* packages/boot: add arm-trusted-firmware-mvebu and initial uDPU supportVladimir Vid2019-11-211-0/+112
| | | | | | | | | | | | | | | | | ATF mvebu is required for building a functional bootloader for A7K/A8K and A37xx platforms. uDPU device is added as the first target. A3700 platform has a wide range of settings which can be used per device, so options are defined under the Device sections. Platform also required WTP (recovery) tools and mv-ddr package for the DDR topology configuration. 32-bit cross compiler is used for building the WTMI image. After the build, flash-image.bin can be used with the bubt command from the u-boot shell to flash the new version of u-boot. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* netifd: dhcp proto convert release to noreleaseKevin Darbyshire-Bryant2019-11-203-6/+29
| | | | | | | | Change dhcp no/release on shutdown to 'norelease' uci option to match existing proto dhcpv6 usage. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Hans Dedecker <dedeckeh@gmail.com>
* am33x-cm3: removeAndre Heider2019-11-201-42/+0
| | | | | | | | | | | | | | | This is currently unused and not working anyway, since the used upstream kernel loads am335x-pm-firmware.elf and not am335x-pm-firmware.bin [0]. The last downstream patches using the latter were removed with e4eef7e6. Remove it instead of fixing it since the rtc-only sleep state can even damage the hardware [1]. [0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ccbbb9faac946ce61c241ce9f08b3486fabf031d [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: support booting off different mmc devicesAndre Heider2019-11-201-3/+7
| | | | | | Tested with installing to/sysupgrading from sd and emmc on boneblack. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: switch from uEnv.txt to generic distro bootingAndre Heider2019-11-204-11/+8
| | | | | | Which makes supporting different boot devices easy. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: update uboot to 2019.10Andre Heider2019-11-208-3592/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All patches have been dropped, they're either redundant (e.g. due to the new and unset CONFIG_SPL_FAT_WRITE), break compilation (thumb hacks) or have been applied upstream. The defconfig for am335x_boneblack has been removed upstream [0], so use am335x_evm for boneblack too. Size changes (before, after, file): ti_am335x-evm and ti_am335x-bone-black: 79804 110832 MLO 623836 756148 u-boot.img ti_omap3-beagle: 54148 57708 MLO 496272 665728 u-boot.img ti_omap4-panda: 39356 40204 MLO 284648 366672 u-boot.img Tested on boneblack, which has the biggest spl size increase. The beagle and panda spl sizes seem reasonable to not break booting. [0] https://gitlab.denx.de/u-boot/u-boot/commit/8fa7f65dd02c176ee6021eaf40114560b8954ba2 Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: switch to kernel 4.19Andre Heider2019-11-201-1/+1
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: enable new sound kernel optionsAndre Heider2019-11-201-1/+5
| | | | | | | | This gets rid of a boot time warning about the missing edma module. Enable SND_OMAP_SOC_HDMI_AUDIO while here. All enabled options default to y. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: disable excess kernel debug optionsAndre Heider2019-11-201-22/+1
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: run `make oldconfig` for kernel 4.19Andre Heider2019-11-201-34/+72
| | | | | | | The only manually enabled config is the new OMAP4_DSS_HDMI_CEC, which defaults to y. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: copy the kernel 4.14 config for 4.19Andre Heider2019-11-201-0/+742
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* ipq40xx: fix build errorKoen Vandeputte2019-11-201-11/+10
| | | | | | | Add missing brace which was accidentally omitted Fixes: d6aea46a50d9 ("kernel: bump 4.14 to 4.14.154") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* brcm2708: remove useless patchesKoen Vandeputte2019-11-202-129/+0
| | | | | | | | | | | The first adds some stuff while the second one just reverts it. Remove both patches. This is done is a separate commit on purpose to make it clear. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: refresh patchesKoen Vandeputte2019-11-192-4/+4
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: backport upstream fixesKoen Vandeputte2019-11-192-0/+77
| | | | | | | This potentially fixes some issues seen on IBSS when interfaces go out of range and then re-appear. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* toolchain/gcc: bump to 7.5.0Koen Vandeputte2019-11-1924-3/+3
| | | | | | | This updates the GCC to the next minor release which fixes +213 bugs. Tested on ARMv6, ARMv7, MIPS R2, x86 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.84Koen Vandeputte2019-11-1929-181/+82
| | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 950-0748-net-bcmgenet-Workaround-for-Pi-4B-network-issue.patch - 950-0754-Revert-net-bcmgenet-Workaround-for-Pi-4B-network-iss.patch - 902-debloat_proc.patch Remove upstreamed: - 150-MIPS-bmips-mark-exception-vectors-as-char-arrays.patch New symbols: X86_INTEL_MPX X86_INTEL_MEMORY_PROTECTION_KEYS X86_INTEL_TSX_MODE_OFF X86_INTEL_TSX_MODE_ON X86_INTEL_TSX_MODE_AUTO Compile-tested on: cns3xxx, x86_64 Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.154Koen Vandeputte2019-11-1930-256/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 902-debloat_proc.patch - 040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch - 807-usb-support-layerscape.patch - 809-flexcan-support-layerscape.patch - 816-pcie-support-layerscape.patch Remove upstreamed: - 150-MIPS-bmips-mark-exception-vectors-as-char-arrays.patch - 303-spi-nor-enable-4B-opcodes-for-mx66l51235l.patch New symbols: X86_INTEL_MPX X86_INTEL_MEMORY_PROTECTION_KEYS X86_INTEL_TSX_MODE_OFF X86_INTEL_TSX_MODE_ON X86_INTEL_TSX_MODE_AUTO SGL_ALLOC Compile-tested on: cns3xxx, x86_64 Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.202Koen Vandeputte2019-11-198-13/+13
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 902-debloat_proc.patch Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: fix buttons for TP-Link TL-WDR4900 v2Adrian Schmutzler2019-11-191-2/+13
| | | | | | | TP-Link TL-WDR4900 v2 only has one combined WPS/Reset button, so don't set up an RFKILL for this device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: fix LED setup for TL-WDR4900 v2Adrian Schmutzler2019-11-191-2/+36
| | | | | | | | | | | | | | | | | In ar71xx there is only one combined mach file for Archer C5/C7 and TL-WDR4900 v2. This one uses the same LED struct for all devices, defining "green" LEDs for them. However, WDR4900 uses blue front LEDs, while only C5/C7 uses green ones. Despite, in base-files WDR4900 is actually set up with "blue" for the mentioned LEDs. Thus, this patch creates a separate LED struct for WDR4900, so the LEDs can be set up correctly. Despite, the wlan5g LED is removed as it is controlled by ath9k chip for WDR4900 (in contrast to C5/C7). Note: While front LEDs are blue, USB LEDs (on the back) are green, so colors are mixed intentionally for the WDR4900 v2. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix DTS node names for Ubiquiti XM partitionsAdrian Schmutzler2019-11-191-2/+2
| | | | | | Some node names were inconsistent with the reg property. Fix it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: Adapt to changes to skb_get_hash_perturb()Hauke Mehrtens2019-11-181-0/+68
| | | | | | | | | | The skb_get_hash_perturb() function now takes a siphash_key_t instead of an u32. This was changed in commit 55667441c84f ("net/flow_dissector: switch to siphash"). Use the correct type in the fq header file depending on the kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* mac80211: brcmfmac: fix PCIe reset crash and WARNINGRafał Miłecki2019-11-183-1/+85
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: include 'reconf' in help output of 'wifi' commandDaniel Golle2019-11-181-1/+1
| | | | | Reported-by: Dirk Brenken <dev@brenken.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: pass console inside bootargs on mt7629John Crispin2019-11-171-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: drop leading + from configJohn Crispin2019-11-171-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: set uImage name of WeVO 11AC NAS and W2914NS v2Sungbo Eo2019-11-171-0/+2
| | | | | | | | | | | | | The stock firmware and bootloader only accept uImage with names that match certain patterns. This patch enables OpenWrt installation from stock firmware without having to reflash the bootloader or access the UART console. Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ar71xx: fix MAC address setup for TL-WDR4900 v2Adrian Schmutzler2019-11-171-3/+6
| | | | | | | | | | | | The MAC address setup of the TL-WDR4900 v2 is different from the C5/C7. This aligns ar71xx with the setup in ath79: wlan0 (5GHz) : -2 wlan1 (2.4GHz) : -1 eth1 (LAN) : 0 eth0 (WAN) : 1 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: remap D-Link DIR-859 A1 WPS button to WPSChristian Lamparter2019-11-161-1/+1
| | | | | | | | The WPS button was mapped to the restart/reset. This patch changes it to emit the KEY_WPS_BUTTON keycode so pressing the WPS button does initiate WPS. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: assign correct key-code to wps buttonsChristian Lamparter2019-11-163-3/+3
| | | | | | | | | | The ASUS WL-330N(3G) and the Edimax RG21S had the reset keycode assigned to the WPS button. This patch changes all three devices to use KEY_WPS_BUTTON in the hopes that this fixes unwanted restarts/ unexpected behavior from the users point of view. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: detect existing interface before addingDaniel Golle2019-11-161-4/+35
| | | | | | | | | | | | | | | Keep existing wdev when creating new nl80211 interfaces if phy and type match, delete it otherwise. To make this work, also remove left-over debugging function which prevented the return-value of the 'iw' command to be taken into account in mac80211_iw_interface_add(). As 4addr-mode (WDS) was setup during interface creation for station interfaces, also set it after interface creation to make sure an existing sta interface ends up with the right mode. Fixes: a5bc9787d4 ("mac80211: add support for dynamically reconfiguring wifi") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "mac80211: restore mac80211_interface_cleanup()"Daniel Golle2019-11-161-16/+0
| | | | | | This reverts commit 000b7687bc50be5b0f1161f4bf8ceb85c495c395. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: fix firmware partition attributes for GL-AR300M16 and -LiteJeff Kletsky2019-11-162-0/+10
| | | | | | | | | | | | | | | | | | | During the introduction of the ath79/nand images for the GL-AR300M series the firmware partition label and compatible were altered, but the necessary adjustments have not been made for the GL-AR300M16 and the GL-AR300M-Lite. This will result in a non-bootable partition setup for these devices. This patch adds the necessary definitions to those two devices. Fixes: 55e6c903ae20 ("ath79: GL-AR300M: provide NAND support; increase to 4 MB kernel") Fixes: b591cabd3989 ("ath79: add GL.iNet GL-AR300M16 as NOR-only board") Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> [extend commit message, alter commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: drop accidentially commited fileJohn Crispin2019-11-151-534/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: fix bootup problem on mt7629 EVBJohn Crispin2019-11-153-0/+728
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath79: fix sysupgrade from ar71xx for WNDR3700 V2 and WNDR3800(CH)Adrian Schmutzler2019-11-141-3/+3
| | | | | | | | | | | ar71xx has just one board name "wndr3700" for WNDR3700 V1/V2, WNDR3800 and WNDR3800CH, whereas ath79 provides separate images for the boards. So, update SUPPORTED_DEVICES to store the correct ar71xx board names. Fixes: FS#2510 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Netgear WNDR3700v4Paul Blazejowski2019-11-146-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ath79 support for Netgear WNDR3700v4. Router was previously supported by ar71xx target only. Note: device requires 'ar934x-nand' driver in kernel. Specification ============= * Description: Netgear WNDR3700v4 * Loader: U-boot * SOC: Atheros AR9344 (560 MHz) * RAM: 128 MiB * Flash: 128 MiB (NAND) - U-boot binary: 256 KiB - U-boot environment: 256 KiB - ART: 256 KiB - POT: 512 KiB - Language: 2 MiB - Config: 512 KiB - Traffic Meter: 3 MiB - Firmware: 25 MiB - ART Backup: 256 KiB - Reserved: 96 MiB * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327) * Wireless: - 2.4 GHz b/g/n (internal) - 5 GHz a/n (AR9580) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN 2G (green) - WLAN 5G (blue) - 4 x LAN (amber/green) - USB (green) - WPS (amber/green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 2.5A * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2 Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Note about partitioning: firmware partition offset (0x6c0000) is hardcoded into vendor's u-boot, so this partition cannot be moved and resized to include Netgear-specific flash areas (pot, language, config, traffic_meter) not used by OpenWrt. Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_nand=y CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr3700-v4=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y Signed-off-by: Paul Blazejowski <paulb@blazebox.homeip.net>
* ath79: split dts file for Netgear WNDR4300Michal Cieslakiewicz2019-11-142-285/+291
| | | | | | | Move board configuration to dtsi file in preparation for WNDR3700v4 router support. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: fix indent in TP-Link TL-WDR4900 v2 DTSAdrian Schmutzler2019-11-141-1/+1
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: improve common DTSI name for TP-Link Archer C5, C7 v1/v2Adrian Schmutzler2019-11-144-3/+3
| | | | | | | | As the former qca9558_tplink_archer-c7.dtsi is also used for Archer C5 v1 this patch removes the number from the DTSI name to indicate that. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* fwtool: update to latest Git headPetr Štetiar2019-11-141-3/+3
| | | | | | 8f7fe925ca20 cmake: use extra compiler warnings only on gcc6+ Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uci: update to latest Git headPetr Štetiar2019-11-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | 8dd50da20de0 lua: fix error handling a2cab3b088a2 ucimap: fix possible use of memory after it is freed 9cf978bc7964 delta: prevent possible null pointer use 7736f497d2d9 cli: remove unused variable assigment 39093f3b040d lua: fix memory leak in set method 19ceff323f1e lua: fix memory leak in changes method 18049a84fe40 tests: add cram based unit tests 2b549cc050de lua: fix copy&paste in error string f5dd5217d627 cli: fix realloc issue spotted by cppcheck af59f86a0db9 iron out all extra compiler warnings 1637d2918692 tests: shunit2: run all tests under Valgrind by default c1af73bfb023 cmake: enable extra compiler checks be69504e3666 cmake: build Lua module only if enabled 38a2f12ec5ab tests: shunit2: fix issues reported by shellcheck 266fc9e94c1e add initial GitLab CI support 17d6144a49c6 tests: shunit2: make it working under CMake a6e8bbefd860 cmake: add unit testing option and shunit2 tests 0ca93fec701a test: move shunit2 tests under standalone subdirectory Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libnl-tiny: update to latest Git headPetr Štetiar2019-11-141-3/+3
| | | | | | | | 0219008cc876 remove never used err variable assignment disliked by scan-build 7ce813fcd667 silence use after the free clang analyzer warning 1f73b6a8e678 use offsetof macro to make scan-build happy Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: prereq: add support for Python 3.8Thomas Weißschuh2019-11-141-0/+2
| | | | | | | | Add support for Python 3.8 which was released Oct. 14, 2019. Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de> [added missing commit description, simplified version check] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: prereq: simplify Python 3 version checksPetr Štetiar2019-11-141-6/+6
| | | | | | We don't need to check if python3.5 binary is actually Python 3.5+. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: rc.common: fix missing EXTRA_HELP textsPeter Stadler2019-11-142-2/+2
| | | | | | | | | | | | | | | Commit ed5b9129d7a4 ("base-files: implement generic service_running") has added EXTRA_HELP variable, thus overriding already available EXTRA_HELP text available in other init scripts, resulting in the missing help text from services like dropbear for example. So fix this regression by appending EXTRA_HELP text provided by the other init scripts into the one provided by the script itself. Fixes: ed5b9129d7a4 ("base-files: implement generic service_running") Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at> [commit title/description facelift, fixes tag, fixed From:, pkg bump] Signed-off-by: Petr Štetiar <ynezz@true.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 10:23:44 +0000