aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: update and clean kernel keyring optionsDaniel Golle2020-12-141-13/+13
| | | | | | | | | | Add KERNEL_KEYS_REQUEST_CACHE option. 'tristate' (ie. module builds) are not valid in Config-kernel.in, hence remove tristate KERNEL_ENCRYPTED_KEYS. It will be readded as a kernel module in a follow-up commit. Fixes: 39d817cf38 ("Add config symbols for kernel keyring support") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lantiq: xrx200: remove unused lan/wan labels from dtsAleksander Jan Bajkowski2020-12-1412-13/+13
| | | | | | These labels are not used anywhere and can be removed. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* ath79: add support for the Belkin F9K1115 v2 (AC1750 DB Wi-Fi)Martin Blumenstingl2020-12-143-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device has (almost?) identical hardware to the F9J1108 v2 but uses a different firmware magic and model number. Specifications: SoC: QCA9558 CPU: 720 MHz Flash: 16 MiB NOR RAM: 128 MiB WiFi 2.4 GHz: QCA9558-AT4A 3x3 MIMO 802.11b/g/n WiFi 5 GHz: QCA9880-2R4E 3x3 MIMO 802.11a/n/ac Ethernet: 4x LAN and 1x WAN (all 1Gbit/s ports) USB: 1 x USB 2.0 (lower), 1 x USB 3.0 (upper) MAC addresses based on OEM firmware: Interface Address Location --------- ------- -------- lan *:5A sometimes in 0x6 wan *:5B 0x0 2.4Ghz *:5A 0x1002 5Ghz As per mini PCIe EEPROM Flashing instructions: The factory.bin can be flashed via the Belkin web UI or via the uboot HTTP upgrade page (which is by default listening on 192.168.2.1). Once the factory.bin has been written, sysupgrade.bin will work as usual. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ath79: create shared DTSI/definition for Belkin F9J1108/F9K1115 v2Martin Blumenstingl2020-12-143-225/+238
| | | | | | | | | | | | | | | Belkin F9J1108 v2 and F9K1115 v2 are (seemingly) identical hardware with different model numbers. Extract all non-device specific code to a common .dtsi so it can be re-used when adding support for the F9K1115 v2. Similar to the .dtsi most of the image building recipe code can be re-used. Move everything except the device model, edimax header magic and edimax header model into a shared build recipe. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [drop duplicate TARGET_DEVICES, add EDIMAX_* to DEVICE_VARS, edit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tplink-safeloader: add support for TP-Link CPE510 v3.20Gioacchino Mazzurco2020-12-141-1/+4
| | | | | | | | | | | | | This adds new strings for the v3.20 to the support list of the already supported TP-Link CPE510 v3. The underlying hardware appears to be the same, similar to the situation with CPE210 v3.20 in 4a2380a1e778 ("tplink-safeloader: expand support list for TP-Link CPE210 v3") Signed-off-by: Gioacchino Mazzurco <gio@altermundi.net> [extended commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uclient: update to Git version 2020-12-10Petr Štetiar2020-12-141-4/+4
| | | | | | | | | | | | | | | | | 2c843b2bc04c Add initial GitLab CI support 073f89f567c0 uclient-fetch: wolfSSL: fix certificate validation 086c292160ac uclient-fetch: init_ca_cert: fix memory leak a3c1a88b031a cmake: enable extra compiler checks 32ff717ed316 uclient-http: fix extra compiler warnings on mips_24kc and cortex-a9+neon 86a2ac6ac46f uclient-fetch: fix potential memory leaks 158dd9dd289c uclient: fix initialized but never read variable 66b4420856a7 uclient-fetch: fix statement may fallt hrough 436f9b3af2ad uclient-http: fix freeing of stack allocated memory e6b5b8a98ce2 Fix extra compiler warnings 12df67e45bb0 Add basic cram based unit tests b6e34845124f cmake: fix building out of the tree Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ustream-ssl: update to Git version 2020-12-10Petr Štetiar2020-12-141-4/+4
| | | | | | | | | | | | | | | | | 68d09243b6fd Add initial GitLab CI support 8280140db9d1 wolfssl: remove now deprecated compatibility code cee6791b362a ustream-mbedtls: fix certificate verification 55c3fd89d508 ustream-mbedtls: implement set_require_validation c6b4c48689a3 ustream-openssl: wolfSSL: fix certificate validation 3bc05402bfab cmake: enable extra compiler checks cd2c3d12db43 ustream-mbedtls: fix comparison of integers of different signs 5896991e46a3 ustream-openssl: fix BIO_method memory leak 2c342ae57c5b ustream-openssl: fix wolfSSL includes fa8ecd6ed140 cmake: fix linking when mbed TLS not in default paths 63656f81045f cmake: fix linking when wolfSSL not in default paths c26f71e844df cmake: fix building out of the tree Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build/json: add filesystem informationPaul Spooren2020-12-132-0/+2
| | | | | | | | Some images are created using different filesystems, most popular squashfs and ext4. To allow downstream projects to distinguesh between those, add the `filesystem` information to created json files. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ipq40xx: revert usage of VLAN S-TAGDavid Bauer2020-12-142-37/+9
| | | | | | | | | | | This reverts the usage of the S-Tag for separating LAN and WAN port on the embedded switch. Many users complained about not being able to manage C-Tag addition / removal on the switch as well as degraded performance. Fixes: commit 9da2b567605b ("ipq40xx: fix ethernet vlan double tagging") Signed-off-by: David Bauer <mail@david-bauer.net>
* zram-swap: remove the compression streams settingsRui Salvaterra2020-12-131-15/+0
| | | | | | | | | Zram switched to per-cpu compression streams since Linux 4.7 [1]. Drop the irrelevant configuration (no-op). [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/block/zram?h=v4.7&id=43209ea2d17aae1540d4e28274e36404f72702f2 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm53xx: MR32: fix DEVICE_VENODR typoChristian Lamparter2020-12-131-1/+1
| | | | | | DEVICE_VENDOR was misspelled as DEVICE_VENODR. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: fix 5Ghz tx/rx power on the ASUS MAP-AC2200Yushi Nishida2020-12-131-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | The ASUS MAP-AC2200 suffers from a lower transmit/receive signal power as compared to the stock firmware. Upon investigation, it was discovered that stock firmware from the GPL_MAP-AC2200_3.0.0.4.384.46249-g97d05bb.tar archive. set the following GPIOs in "release/src/router/rc/init.c". GPIO 44 and 46 have to be set to output high GPIO 45 and 47 have to be set to output low Here are some results, after activating the relevant gpios through cmdline: <https://forum.openwrt.org/t/asus-map-ac2200-low-transmit-receive-signal-5ghz/69005/12> THX @ slh Fixes: 9ad3967f140 ("ipq40xx: add support for ASUS Lyra") Signed-off-by: Yushi Nishida <kyro2man@gmx.net> [slightly rewritten commit, added missing <>) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-zynq: fix dtc compilation on host gcc 10Luis Araneda2020-12-131-0/+48
| | | | | | | | | | | | gcc 10 defaults to -fno-common, which causes an error when linking. Back-port the following Linux kernel commit to fix it: e33a814e772c (scripts/dtc: Remove redundant YYLOC global declaration) Tested on an Arch Linux host with gcc 10.1.0 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* odhcpd: remove local mkdir_p implementationDaniel Golle2020-12-131-3/+3
| | | | | | | Replace local mkdir_p implementation in favour of using mkdir_p now added to libubox. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2020-12-121-3/+3
| | | | | | | 111416d jail: remove unreachable code 7f12c89 treewide: replace local mkdir_p implementations Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2020-12-121-3/+3
| | | | | | | | 0c6fb90 jffs2-reset: allow doing a factory reset and passing a sysupgrade.tgz 4862530 mount: restorecon: guard against execl() errors f415323 block: replace local mkdir_p implementation Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libubox: utils: introduce mkdir_pDaniel Golle2020-12-121-4/+4
| | | | | | | Add new utility function mkdir_p(char *path, mode_t mode) to replace the partially buggy implementations found accross fstools and procd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* selinux-policy: update to version 0.4Daniel Golle2020-12-121-2/+3
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* xfrm: support 'multicast' attribute on interfacesPhilip Prindeville2020-12-112-3/+6
| | | | | | | | | | | | | | You shouldn't need the overhead of GRE just to add multicast capability on a point-to-point interface (for instance, you might want to run mDNS over IPsec transport connections, and Avahi requires IFF_MULTICAST be set on interfaces, even point-to-point ones). Borrowed heavily from: b3c9321b9e gre: Support multicast configurable gre interfaces Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* openssl: update to 1.1.1iEneas U de Queiroz2020-12-111-3/+3
| | | | | | | | Fixes: CVE-2020-1971, defined as high severity, summarized as: NULL pointer deref in GENERAL_NAME_cmp function can lead to a DOS attack. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: add Aquantia AQtion USB-to-5GbE adaptersMarty Jones2020-12-111-0/+15
| | | | | | | | | This add support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE adapters based on the AQC111U controllers. Run-tested: x86 Adapter-tested: Sabrent NT-SS5G Signed-off-by: Marty Jones <mj8263788@gmail.com>
* mvebu: fix initramfs/kernel image for CZNIC Turris OmniaKarel Kočí2020-12-111-2/+1
| | | | | | | | | | | | | | | | | This adds DTB to kernel and that way makes it possible to easily boot initramfs image and also kernel. The sequence to boot initramfs on Omnia is then just: env set bootargs earlyprintk console=ttyS0,115200 dhcp 0x1000000 192.168.1.1:openwrt-mvebu-cortexa9-cznic_turris-omnia-initramfs-kernel.bin bootz 0x1000000 Without this change kernel boot won't proceed and is stuck on "Starting kernel". Signed-off-by: Karel Kočí <karel.koci@nic.cz> [fixed From: to match with SoB:] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* dropbear: bump package versionKonstantin Demin2020-12-111-1/+1
| | | | | | | | Bump package version after previous changes. Signed-off-by: Konstantin Demin <rockdrilla@gmail.com> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* dropbear: add ssh-askpass support in configurationKonstantin Demin2020-12-112-1/+12
| | | | | | | | | | binary size cost is much less than 1k. tested on ath79/generic: bin: 215128 -> 215132 (+4b) ipk: 111183 -> 111494 (+311b) Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* dropbear: roll up recipes into mapping listsKonstantin Demin2020-12-111-24/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this commit removes manual recipes for options and introduces mapping lists: - DB_OPT_COMMON holds option mappings which are common for all builds; - DB_OPT_CONFIG holds option mappings which are depend on config settings. DB_OPT_COMMON is space-separated list of 'words', each of them is in format: 'header_option|value' 'header_option' is added with value 'value' to 'localoptions.h'. if 'header_option' is preceded by two exclamation marks ('!!') then option is not added to 'localoptions.h' but replaced in 'sysoptions.h'. in short: option|value - add option to localoptions.h !!option|value - replace option in sysoptions.h DB_OPT_CONFIG is space-separated list of 'words', each of them is in format: 'header_option|config_variable|value_enabled|value_disabled' 'header_option' is handled likewise in DB_OPT_COMMON. if 'config_variable' is enabled (technically: not disabled) then 'header_option' is set to 'value_enabled' and 'value_disabled' otherwise. in short: option|config|enabled|disabled = add option to localoptions.h !!option|config|enabled|disabled = replace option in sysoptions.h option := (config) ? enabled : disabled If you're not sure that option's value doesn't have '|' within - add your recipe manually right after '$(Build/Configure/dropbear_headers)' and write some words about your decision. PS about two exclamation marks: early idea was to use one exclamation mark to denote such header options but then i thought single exclamation mark may be overlooked by mistake. Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* dropbear: rework recipes that configure buildKonstantin Demin2020-12-111-22/+17
| | | | | | | | - add two helper functions to avoid mistakes with choice of correct header file to work with - update rules accordingly Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* dropbear: reorder options in Configure recipeKonstantin Demin2020-12-111-11/+11
| | | | | | | put static options at first place, then place configurable options. also put DROPBEAR_ECC right before DROPBEAR_ECC_FULL to ease maintainance. Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* dropbear: enable back DROPBEAR_USE_PASSWORD_ENVKonstantin Demin2020-12-111-2/+1
| | | | | | | | | | | | | this option was disabled in 2011 and these long nine years showed us that change was definitely wrong. binary size cost is much less than 1k. tested on ath79/generic: bin: 215128 -> 215128 (no change) ipk: 111108 -> 111183 (+75b) Fixes: 3c801b3dc0359 ("tune some more options by default to decrease size") Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* realtek: Add missing case in switch statementRafał Mikrut2020-12-111-0/+1
| | | | | | | | | | | | Cppcheck shows here duplicated break. Code `state->speed = SPEED_1000;` will be never executed because above it there is break statement. Almost identical statement is placed in another realtek driver https://github.com/openwrt/openwrt/blob/18a53d43d646290053eff4736ec852efcf6bf510/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c#L286-L294 Signed-off-by: Rafał Mikrut <mikrutrafal@protonmail.com>
* realtek: Fix self assignmentRafał Mikrut2020-12-111-1/+1
| | | | | | | | | Cppcheck shows self initialization error, which is an obvious bug. Basing on logic of similar fragment below I assigned to this variable, value `RTL838X_LED_GLB_CTRL` which I think is proper. Signed-off-by: Rafał Mikrut <mikrutrafal@protonmail.com>
* package/base-files: caldata: use dd iflag fullblockJohn Thomson2020-12-112-13/+26
| | | | | | | | | | | | | | | | This dd flag ensures that the requested size is retrieved from pipes or special filesystems (if available). Without this flag, on multi-core systems, Piped or special filesystem data can be truncated when a size greater than PIPE_BUF is requested. Fixes: FS#3494 Fixes: 7557e7f ("package/base-files: caldata: work around dd's limitation") Cc: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* wolfssl: fix broken wolfSSL_X509_check_hostPetr Štetiar2020-12-112-1/+124
| | | | | | | Backport upstream post 4.5.0 fix for broken wolfSSL_X509_check_host(). References: https://github.com/wolfSSL/wolfssl/issues/3329 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wolfssl: compile with --enable-opensslallEneas U de Queiroz2020-12-111-1/+2
| | | | | | | | | | This enables all OpenSSL API available. It is required to avoid some silent failures, such as when performing client certificate validation. Package size increases from 356.6K to 374.7K for arm_cortex-a9_vfpv3-d16. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: add lighty support, skip crypttestsEneas U de Queiroz2020-12-111-1/+3
| | | | | | | | | | Tnis adds the --enable-lighty option to configure, enabling the minimum API needed to run lighttpd, in the packages feed. Size increase is about 120 bytes for arm_cortex-a9_vfpv3-d16. While at it, speed up build by disabling crypt bench/test. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* bcm63xx: DGND3700v1: use the real board nameDaniel González Cabanelas2020-12-111-1/+1
| | | | | | | | | | The Netgear DGND3700v1/DGND3800B shows kernel redundant info at the board message, already provided by the machine info message. Use the real board name which is silkscreened on the PCB and used in the stock firmware header. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* config: add big EXPERIMENTAL optionDaniel Golle2020-12-101-1/+15
| | | | | | | | | | | | As discussed in the today's (2020-12-10) meeting, add a new option to menuconfig to group the selection of all experimental features to be selected by default. Developers are recommended to make use of this new symbol to guard new features. Other developers and community members should feel encouraged to build with this flag enabled to help testing and provide feedback. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/feeds: fix preference of package installKarel Kočí2020-12-091-16/+14
| | | | | | | | | | | | | | The previous behavior prefered same feed for dependent packages as initial package. This caused inconsitency in installation of packages. The difference was if two feeds provide same package (different version) there was different result if you executed install for that specific version compared to install for package depending on it from different feed. This ensures that preferred feed is propagated without change and selected feed is used only really for package it was selected for. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* opkg: remove legacy dist and extra_dataPaul Spooren2020-12-091-3/+3
| | | | | | | | | efb26a3 libopkg: remove "extra_data" option 1d67ab7 libopkg: remove support for "dist" config Reduces opkg size by about 400 Bytes. Signed-off-by: Paul Spooren <mail@aparcar.org>
* iftop: remove packagePaul Spooren2020-12-091-45/+0
| | | | | | | The package has no reason to be in openwrt.git. Move it to packages.git. Signed-off-by: Paul Spooren <mail@aparcar.org> Acked-by: Jo-Philipp Wich <jo@mein.io>
* odhcp6c: update to latest git HEADHans Dedecker2020-12-091-3/+3
| | | | | | | 0ffa3a3 dhcpv6: harden reconfigure logic 3999b6d dhcpv6: rework DHCPv6 message to string implementation Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* scripts/feeds: warn when skipping core package overrideBrian Norris2020-12-091-1/+4
| | | | | | | | | | Otherwise, a n00b like myself can get quite confused when moving a package from core to feeds, for example. (Hint: one *really* needs to clear out the tmp/info/.packageinfo... entries for the stale package, but '-f' works as well.) Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* kernel: bump 5.4 to 5.4.82John Audia2020-12-094-48/+4
| | | | | | | | | | | | | | | | Removed since included upstream and could be reverse-applied by quilt: backport-5.4/315-v5.10-usbnet-ipeth-fix-connectivity-with-ios-14.patch Remaining modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [build/run x86_64]
* lldpd: fix autoreconf failureJo-Philipp Wich2020-12-091-0/+61
| | | | | | | | | | | | | | | | | | | | | The lldpd sources ship a modified local AX_LIB_READLINE M4 macro which conflicts with the official macro shipped by autoconf-archive. Due to the official macro having the same name and a higher serial number, autoconf will prefer including that one instead of the local copy, preventing the substitution of @READLINE_LIBS@ in Makefile.in templates, ultimately leading to the following build failure when linking lldpcli: ...-gcc: error: READLINE_LIBS@: No such file or directory Avoid this problem by renaming the locally shipped macro to not clash with the official implementation anymore. Ref: https://github.com/lldpd/lldpd/pull/423 Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* bcm63xx: add support for Innacomm W3400V6Sieng Piaw Liew2020-12-0912-26/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Innacomm W3400V6 is an xDSL B/G wireless router based on Broadcom BCM6328 SoC. Hardware: SoC: Broadcom BCM6328 CPU: BMIPS4350 V8.0, 320 MHz, 1 core Flash: SPI-NOR 8MB, MX25L6406E RAM: 64 MB Ethernet: 4x 10/100 Mbps Switch: Integrated Wireless: 802.11b/g, BCM4312 LEDs/Buttons: 9x / 2x Flash instruction, web UI: 1) Set a static IP on your computer compatible with 192.168.1.1, i.e 192.168.1.100 2) Connect the ethernet cable from your computer to the router. 3) Make sure the router is powered off. 4) Press the reset button, don't release it yet! 5) While pressing reset, power on the router. 6) Wait 10 seconds or more. Note: The power LED is red at first then turns to solid green when ready. 8) Release the reset button. 9) Browse to 192.168.1.1 10) Select .bin file. 10) Upgrade the image. 11) Wait for it to reboot. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> [Ammend commit description, merge patches, DT improvements] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: unlock MX25L6406E with 4 bit Block ProtectSieng Piaw Liew2020-12-091-0/+69
| | | | | | | | | | Hacked in basic support for 4 bit Block Protection register, copied from linux-master. Needed to unlock Innacomm W3400V's SPI flash MX25L6406E, compatible with MX25L6405D. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> [Amend commit description, refresh patch] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* uboot-envtools: ramips: use full names for Xiaomi Mi RoutersAdrian Schmutzler2020-12-082-4/+4
| | | | | | | | | This updates uboot-envtools with the updated names from ramips target. Fixes: 6d4382711a65 ("ramips: use full names for Xiaomi Mi Router devices") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: use full names for Xiaomi Mi Router devicesAdrian Schmutzler2020-12-089-28/+30
| | | | | | | | | | This aligns the device/image names of the older Xiaomi Mi Router devices with their "friendly" model and DEVICE_MODEL properties. This also reintroduces consistency with the newer devices already following that scheme. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: mt7628: create shared DTSI for Xiaomi Mi Router 4A/4CAdrian Schmutzler2020-12-083-207/+130
| | | | | | | | | The Xiaomi Mi Router 4A (100M) and 4C are relatively similar in their specs. Create a shared DTSI for them. Partitions are split in preparation for Mi Router 4AC. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: find_md5 list with mod time and sortedJohn Beckett2020-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | It was observed that the MD5 would not change after source files had been modified, looking deeper into the build process it was discovered that find_md5 build function makes a list of the files being built and then passes the list to a summing utility on stdin. The resultant MD5 is of the file list, not the contents of the files. The MD5 would change if the ordering of the list changed, or items were removed or deleted. The proposed fix is to add the modification time after the filename and then sort the list to prevent find returning files in a different order falsely re-triggering a rebuild. The MD5 will now change when a file is modified or files are added/removed from the list. Using 'T@' to show time in epoch for timezone independent behaviour. Signed-off-by: John Beckett <john.beckett@net2edge.com>
* libcxx[abi]: removeRosen Penev2020-12-077-210/+2
| | | | | | | | | | | | This is a neat project, but offers no benefit to OpenWrt. The initial reason for it was to be a replacement for libstdcpp as it is smaller and lacks compatibility for C++98. Unfortunately, compiling several packages with it results in larger ipk sizes. While not a member of the packages feed, this will be moved to packages-abandoned to keep it somewhere. Signed-off-by: Rosen Penev <rosenp@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 21:40:13 +0000