aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* base-files: add reboot only button handlerAlan Swanson2019-05-301-0/+12
| | | | | | | | | | | | For devices such as BTHOMEHUBV5A with both reset and restart buttons, its easily accessible restart button has been assigned to KEY_POWER power script to poweroff preventing accidental (or malicious) factory resets by KEY_RESTART reset script. However an easily accessible button immediately powering off the device is also undesirable. Fixes: FS#1965 Signed-off-by: Alan Swanson <reiver@improbability.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> [long line wrap]
* procd: update to latest git HEADPetr Štetiar2019-05-301-3/+3
| | | | | | | ade00ca585a4 container: fix .dockerenv stat check 385b904b2f0a hotplug: improve error message during group ownership change Signed-off-by: Petr Štetiar <ynezz@true.cz>
* procd: update to latest git HEADPaul Spooren2019-05-291-3/+3
| | | | | | 7f0f6b2 procd: add docker support Signed-off-by: Paul Spooren <mail@aparcar.org>
* busybox: fix: ip addr flush hangs when run by non-root userMikael Magnusson2019-05-282-1/+215
| | | | | | | | | | | | | Add upstream patch from: https://git.busybox.net/busybox/commit/?id=028c5aa18b5273c029f0278232d922ee1a164de6 The patch fixes a problem with an infinite loop causing 100% CPU usage when running the following command /lib/preinit/10_indicate_preinit without the CAP_NET_ADMIN capability (such as in Docker): ip -4 address flush dev $pi_ifname Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patch]
* kernel: bump 4.19 to 4.19.45Koen Vandeputte2019-05-281-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.121Koen Vandeputte2019-05-281-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.178Koen Vandeputte2019-05-281-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netifd: fix missing ip rules after network reload (FS#2296)Hans Dedecker2019-05-281-3/+3
| | | | | | beb810d iprule: fix missing ip rules after a reload (FS#2296) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath79: ecb1750: additional dts fixesPetr Štetiar2019-05-271-0/+2
| | | | | | | | | | | This patch fixes following missing bits: - add missing 'compatible' property on firmware partition - set vendor partition 'userconfig' read-only Fixes: 30dcbc741d84 ("ath79: add support for EnGenius ECB1750") Signed-off-by: Sven Friedmann <sf.openwrt@okay.ms> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for WD My Net N750Ryan Mounce2019-05-275-7/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: AR9344 RAM: 128MB Flash: 16MiB Winbond 25Q128BVFG SPI NOR 5GHz WiFi: AR9380 PCIe 3x3:3 802.11n 2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n 5x Gigabit ethernet via AR8327N switch (green + amber LEDs) 2x USB 2.0 via GL850G hub 4x front LEDs from SoC GPIO 1x front WPS button from SoC GPIO 1x bottom reset button from SoC GPIO Known issues: AR8327N LEDs only have default functionality, not presented in sysfs. This is a regression from ar71xx. UART header JP1, 115200 no parity 1 stop TX GND VCC (N/P) RX See https://openwrt.org/toh/wd/n750 for flashing detail. Procedures unchanged from ar71xx. Tested sysupgrade + factory flash from WD Emergency Recovery Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* curl: bump to 7.65.0Hans Dedecker2019-05-261-2/+2
| | | | | | For changes in 7.65.0; see https://curl.haxx.se/changes.html#7_65_0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* map: don't set default firewall zone to wanHans Dedecker2019-05-262-23/+27
| | | | | | | | | | Don't set the default firewall zone to wan if not specified to keep the behavior aligned with other tunnel protocols like gre and 6rd. If the interface zone is not specified try to get it from the firewall config when constructing the procd firewall rule. While at it only add procd inbound/outbound firewall rules if a zone is specified. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* 464xlat: don't set default firewall zone to wanHans Dedecker2019-05-262-13/+17
| | | | | | | | | | Don't set the default firewall zone to wan if not specified to keep the behavior aligned with other tunnel protocols like gre and 6rd. If the interface zone is not specified try to get it from the firewall config when constructing the procd firewall rule. While at it only add a procd inbound firewall rule if a zone is specified. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ethtool: bump to 5.1Petr Štetiar2019-05-251-2/+2
| | | | | | | | | | | | | | | | | | | | * Feature: Add support for 200Gbps (50Gbps per lane) link mode * Feature: simplify handling of PHY tunable downshift * Feature: add support for PHY tunable Fast Link Down * Feature: add PHY Fast Link Down tunable to man page * Feature: Add a 'start N' option when specifying the Rx flow hash indirection table. * Feature: Add bash-completion script * Feature: add 10000baseR_FEC link mode name * Fix: qsfp: fix special value comparison * Feature: move option parsing related code into function * Feature: move cmdline_coalesce out of do_scoalesce * Feature: introduce new ioctl for per-queue settings * Feature: support per-queue sub command --show-coalesce * Feature: support per-queue sub command --coalesce * Fix: fix up dump_coalesce output to match actual option names * Feature: fec: add pretty dump Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "base-files: add console to inittab"Alexander Couzens2019-05-251-1/+0
| | | | | | | This reverts commit cde52cb4866fe8cf4a19bb2bb32ff7802e542e19. When using OpenWrt in qemu, the shell is unsuable Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* uci: fix heap use after free (FS#2288)Hans Dedecker2019-05-231-3/+3
| | | | | | f199b96 uci: fix options list of section after type change Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* glibc: update to latest 2.27 commit (BZ #24531)Hans Dedecker2019-05-231-2/+2
| | | | | | 54ba8bcd423 Fix tcache count maximum (BZ #24531) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gemini: Support sysupgrade on DIR-685Linus Walleij2019-05-232-1/+28
| | | | | | | | | | | | | This makes sysupgrade work on the D-Link DIR-685 after initial factory install. We create the platform.sh script to support sysupgrade on more targets as we move on with sysupgrade support. Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> [cleanup in platform.sh, removed superfluous SUPPORTED_DEVICES]
* lua: lnum: fix strtoul based number parsingLiangbin Lian2019-05-233-1/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lua's LNUM patch currently doesn't parse properly certain numbers as it's visible from the following simple tests. On x86_64 host (stock Lua 5.1.5, expected output): $ /usr/bin/lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)' 2147483648 8796093022208 4294967296 On x86_64 host: $ staging_dir/hostpkg/bin/lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)' -2147483648 0 0 On x86_64 target: $ lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)' -2147483648 0 0 On ath79 target: $ lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)' -2147483648 8796093022208 4294967296 It's caused by two issues fixed in this patch, first issue is caused by unhadled strtoul overflow and second one is caused by the cast of unsigned to signed Lua integer when parsing from hex literal. Run tested on: * Zidoo Z9S with RTD1296 CPU (aarch64_cortex-a53) * qemu/x86_64 * qemu/armvirt_64 * ath79 Signed-off-by: Liangbin Lian <jjm2473@gmail.com> [commit subject/message touches, fixed From to match SOB, fixed another unhandled case in luaO_str2i, host Lua, package bump] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "bc: update to 1.07.1"Hans Dedecker2019-05-222-15/+20
| | | | | | | | | This reverts commit 0111b86f1db501d57bfee8a313fe5bebdf8b2ed9 as it breaks on Linux distributions without ed support ./fix-libmath_h: line 1: ed: command not found Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bc: update to 1.07.1Deng Qingfang2019-05-222-20/+15
| | | | | | | Update bc to 1.07.1 Use GNU mirror Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* base-files: add console to inittabPaul Spooren2019-05-211-0/+1
| | | | | | | | | | | When running OpenWrt inside an LXC container no shell is opend as LXC defaults to a virtual /dev/console. This patch allows to enter a shell after starting the container via `lxc-start`, without it is only posible to access a shell on tty1 via `lxc-console`. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ar71xx: wr940 v4/v6: correct lan interface mac addressAlexander Couzens2019-05-211-1/+1
| | | | | | | | The vendor firmware only uses two mac addresses, the mac address on the label and the label + 1. While checking multiple devices, all labels have even mac addresses. Concluding only 2 address are assigned to a device. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* iwinfo: update to latest git HEADKoen Vandeputte2019-05-211-3/+3
| | | | | | | | 073a838891e5 iwinfo: Complete device IDs for Ubiquiti airOS XM/XW devices 04f5a7d3a431 iwinfo: Add Mikrotik R11e-5HnD c2cfe9d96c9a iwinfo: Fix 802.11ad channel to frequency Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.44Koen Vandeputte2019-05-217-121/+11
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.120Koen Vandeputte2019-05-2136-378/+260
| | | | | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch - 060-fix-oxnas-rps-dt-match.patch Altered patches: - 0067-generic-Mangle-bootloader-s-kernel-arguments.patch - 006-mvebu-Mangle-bootloader-s-kernel-arguments.patch - 996-generic-Mangle-bootloader-s-kernel-arguments.patch Compile-tested on: ar71xx, cns3xxx, imx6, mvebu, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.177Koen Vandeputte2019-05-211-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: glinet_gl-ar750s: Add USB power & microSDAlexander Wördekemper2019-05-202-8/+23
| | | | | | | | | The GL.iNet AR750S USB and microSD port is currently not working out of the box. GPIO 7 is used to control the power of the USB port. Add GPIO 7 as a fixed-regulator for the port. Also add &usb1 to DTS to get the microSD port to work. Signed-off-by: Alexander Wördekemper <alexwoerde@web.de>
* imx6: apalis: fix config survival after sysupgrade -nPetr Štetiar2019-05-201-0/+13
| | | | | | | | | This patch fixes `sysupgrade -n` when flashed with rootfs of the same size as currently running, so the rootfs_data wouldn't get destroyed and thus survive reboot. So let's fix it by always cleaning up the content of the rootfs_data during sysupgrade. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-imx6: bump to 2019.04 and refresh patchesPetr Štetiar2019-05-204-14/+10
| | | | | | | | | | | | Build tested: apalis, mx6sabresd, nitrogen6dl, nitrogen6dl2g, nitrogen6q, nitrogen6q2g, nitrogen6s, nitrogen6s1g, wandboard Run tested: apalis Cc: Felix Fietkau <nbd@nbd.name> Cc: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add leds migrations for archer-c7-v5Petr Štetiar2019-05-201-0/+3
| | | | | | | | | ar71xx uses `archer-c7-v5` for led prefix, but ath79 sticks to more generic `tplink` as the DTS is reused by more boards, so we need to perform migrations of the LED names during upgrade. Cc: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ar71xx: set mib-poll-interval on devices with ar8xxx switchPetr Štetiar2019-05-201-0/+50
| | | | | | | | | | | | | | Commit "generic: ar8216: add mib_poll_interval switch attribute" sets mib-poll-interval as disabled by default (was set to 2s), so it makes switch LEDs trigger disfunctional on devices which don't have mib-poll-interval set. So this patch sets mib-poll-interval to 500ms on devices which are using ar8xxx switch LEDs trigger, as the same value was set for built in switches in 443fc9ac35 ("ath79: use ar8216 for builtin switch"). Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* apm821xx: set mib-poll-interval on emac0 attached ar83xx switchPetr Štetiar2019-05-202-0/+4
| | | | | | | | | | | | | Commit "generic: ar8216: add mib_poll_interval switch attribute" sets mib-poll-interval as disabled by default (was set to 2s), so it makes switch LEDs trigger disfunctional on devices which don't have mib-poll-interval set. So this patch sets mib-poll-interval to 500ms on devices which have ar83xx switch connected to emac0, as the same value was set for built in switches in 443fc9ac35 ("ath79: use ar8216 for builtin switch"). Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: set mib-poll-interval on mdio0 attached ar83xx switchPetr Štetiar2019-05-206-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "generic: ar8216: add mib_poll_interval switch attribute" sets mib-poll-interval as disabled by default (was set to 2s), so it makes switch LEDs trigger disfunctional on devices which don't have mib-poll-interval set. So this patch sets mib-poll-interval to 500ms on devices which have ar83xx switch connected to mdio0 bus, as the same value was set for built in switches in 443fc9ac35 ("ath79: use ar8216 for builtin switch"). Some measurements performed on TP-Link Archer C7-v5: mib-type=0, mib-poll-interval=500ms (10s pidstat) Average: %usr %system %guest %wait %CPU CPU Command Average: 0.00 1.93 0.00 0.00 1.93 - kworker/0:2 iperf3 (30s): 334 Mbits/sec mib-type=0, mib-poll-interval=2s (10s pidstat) Average: %usr %system %guest %wait %CPU CPU Command Average: 0.00 1.14 0.00 0.00 1.14 - kworker/0:2 iperf3 (30s): 334 Mbits/sec So it seems like we get 4x faster LED refresh rate for additional 0.8% CPU load. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: add support for the new ar8xxx MIB counters settingsPetr Štetiar2019-05-202-1/+17
| | | | | | | | | | | | | Commit "generic: ar8216: add mib_poll_interval switch attribute" has added mib_poll_interval global config option and commit "generic: ar8216: group MIB counters and use two basic ones only by default" has added mib_type config option. So this patch adds ucidef_set_ar8xxx_switch_mib helper function which would allow configuration of the above mentioned new switch config options. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* netifd: add support for the new ar8xxx MIB counters settingsPetr Štetiar2019-05-202-2/+4
| | | | | | | | | Commit "generic: ar8216: add mib_poll_interval switch attribute" has added mib_poll_interval global config option and commit "generic: ar8216: group MIB counters and use two basic ones only by default" has added mib_type config option. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* generic: ar8216: group MIB counters and use two basic ones only by defaultChuanhong Guo2019-05-203-81/+150
| | | | | | | | | | | | | | | | | There are too many MIB counters that almost nobody needs since commit d6366ce3665f ("generic: ar8216: mib_work_func: read all port mibs everytime"). In the worker function to poll MIB data, it deals with all ports instead of only one port every time, which introduces too many mdio operations that it becomes a heavy CPU load even on not-emulated MDIO bus. This commit groups MIB counters and enable only TxBytes and RxGoodBytes by default (both of which are necessary to get swconfig led working.) and adds an swconfig attribute to allow enabling all counters if users need them. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add mib_poll_interval switch attributeChuanhong Guo2019-05-203-8/+63
| | | | | | | | | | | | | | This allows specifying interval of polling MIB counters from userspace and allow completely turning off MIB counter support by setting mib_poll_interval to 0. Since MIB counter polling is a heavy CPU load for GPIO emulated MDIO bus, disable this behavior by default. Those who wants to use swconfig LEDs can enable them with qca,mib-poll-interval dts property or with swconfig command. Fixes: FS#2230 ("kworker spikes 100% cpu every 2 second.") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* uboot-fritz4040: Add host flags for host compilerHauke Mehrtens2019-05-191-2/+2
| | | | | | | | | | | | | This adds the host staging directory to the include path to make it use the zlib.h files from the staging include directory and also link against the zlib version from the staging directory. This fixes a compile problem when the zlib header were not installed on the build host. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [picked from openwrt-18.06]
* apm821xx: WNDR4700: remove obsolete sd-card change detectionChristian Lamparter2019-05-191-18/+0
| | | | | | | | | The SD-Card polling is now implemented by default in the fs-tools block-mount utility package. It might not be as fast as the current detection method since the polling time is 2 Seconds, but it's much less of an hack. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ppp: update to version 2.4.7.git-2019-05-18Hans Dedecker2019-05-186-287/+7
| | | | | | | | | | | c9d9dbf pppoe: Custom host-uniq tag 44012ae plugins/rp-pppoe: Fix compile errors Refresh patches Drop 520-uniq patch as upstream accepted Drop 150-debug_compile_fix patch as fixed upstream Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* scons: update to 3.0.5Deng Qingfang2019-05-181-2/+2
| | | | | | Update scons to 3.0.5 Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* ath79: convert WD MyNet Range Extender to gpio-keysChristian Lamparter2019-05-181-5/+1
| | | | | | | This patch converts the Range Extender to use the interrupt-driven gpio-keys driver over the polled variant. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: convert Netgear WNDR3700 series to gpio-keysChristian Lamparter2019-05-181-2/+1
| | | | | | | This patch converts the WNDR3700 to use the interrupt-driven gpio-keys driver over the polled variant. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: use the qca,qca9563 chip compatible for the WR818Christian Lamparter2019-05-181-1/+1
| | | | | | | | | | | | | | | | | | | | All other QCA9563 devices already use this identifier for the exact SoC. Not that this matters much since as upstream states in Documentation/devicetree/usage-model.txt: "First and foremost, the kernel will use data in the DT to identify the specific machine. In a perfect world, the specific platform shouldn't matter to the kernel because all platform details would be described perfectly by the device tree in a consistent and reliable manner. [...] In the majority of cases, the machine identity is irrelevant, and the kernel will instead select setup code based on the machine's core CPU or SoC." Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: add support for Telco Electronics X1Nicholas Smith2019-05-184-0/+184
| | | | | | | | | | | | | | | | | | | | | | | | | Hardware: SoC: MT7621 DRAM: 256MB DDR3 Flash: 16MB SPI-NOR WiFi: 2.4GHz: MT7603 @ PCIe0 WiFi: 5.8GHz: MT7612 @ PCIe1 Modem: Sierra Wireless MC74xx Interfaces: GBE RJ45 x5 mPCIe x2 UART x1 I2C x1 JTAG x1 UIM x1 LEDs x6 Flash instructions: Flash from within the factory bootloader, firmware web interface or CLI using sysupgrade -F -n Signed-off-by: Nicholas Smith <mips171@icloud.com>
* ath79: add support for TP-Link Archer D50 V1Davide Fioravanti2019-05-185-0/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer D50 v1 is a dual-band AC1200 router + modem. The router section is based on Qualcomm/Atheros QCA9531 + QCA9882. The "DSL" section is based on BCM6318 but it's currently not supported. Internally eth0 is connected to the Broadcom CPU. Router section - Specification: CPU: QCA9531 650/600/200 MHz (CPU/DDR/AHB) RAM: 64 MB (DDR2) Flash: 8 MB (SPI NOR) Wifi 2.4GHz: QCA9531 2T2R Wifi 5GHz: QCA9982 2T2R 4x 10/100 Mbps Ethernet 8x LED, 3x button UART header on PCB Known issues: DSL not working (eth0) (WIP) UART connection --------------- J2 HEADER (Qualcomm CPU) . TX . RX . GND O VCC J16 HEADER (Broadcom CPU) O VCC . GND . RX . TX The following instructions require a connection to the J2 UART header. Flash instruction under U-Boot, using UART ------------------------------------------ 1. Press any key to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftpboot 0x81000000 openwrt-ath79-generic-tplink_archer-d50-v1-squashfs-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Initramfs instruction under U-Boot for testing, using UART ---------------------------------------------------------- 1. Press any key to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftpboot 0x81000000 openwrt-ath79-generic-tplink_archer-d50-v1-initramfs-kernel.bin bootm 0x81000000 Restore the original firmware ----------------------------- 0. Backup every partition using the OpenWrt web interface 1. Download the OEM firmware from the TP-Link website 2. Extract the bin file in a folder (eg. Archer_D50v1_0.8.0_1.3_up_boot(170223)_full_2017-02-24_09.37.45.bin) 3. Remove the U-Boot and the Broadcom image part from the file. Issue the following command: dd if="Archer_D50v1_0.8.0_1.3_up_boot(170223)_full_2017-02-24_09.37.45.bin" of="Archer_D50v1_0.8.0_1.3_up_boot(170223)_full_2017-02-24_09.37.45.bin.mod" skip=257 bs=512 count=15616 4. Double check the .mod file size. It must be 7995392 bytes. 5. Flash it using the OpenWrt web interface. Force the update if needed. WARNING: Remember to NOT keep settings. 5b. (Alternative to 5.) Flash it using the U-Boot and UART connection. Issue below commands in the U-Boot: tftpboot 0x81000000 Archer_D50v1_0.8.0_1.3_up_boot(170223)_full_2017-02-24_09.37.45.bin.mod erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed default-state = "off", it's already the default, added pcie node, fixed typo]
* tools/firmware-utils: mktplinkfw2: add Qualcomm layoutsDavide Fioravanti2019-05-181-0/+12
| | | | | | | This commit adds the partition layout used by the TP-Link Archer D50 and probably by the TP-Link Archer D7 to mktplinkfw2. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* ath79: add support for Aruba AP-105Chris Blake2019-05-183-0/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: Atheros AR7161-8C1A @ 680 MHz RAM: 128MB - 2x Etron Technology EM6AB160TSA-5G NOR: 16MB - 1x MXIC MX25L12845EMI-10G (SPI-NOR) WI1: Atheros AR9223-AC1A 802.11bgn WI2: Atheros AR9220-AC1A 802.11an ETH: Atheros AR8021-BL1E + PoE LED: Dual-Color Power/Status, Ethernet, WLAN2G and WLAN5G BTN: 1 x Reset I2C: AT97SC4303s TPM (needs driver!) CON: RS232-level 8P8C/RJ45 Console Port - 9600 Baud Factory installation: - Needs a u-boot replacement. See Wiki for information on how to do a in-circut flash with a SPI-Flasher like a CH314A or flashrom. Wiki page can be found at https://openwrt.org/toh/aruba/aruba_ap-105 - Be careful when dis- and reassembling the device to not squish any of the antenna cables in the process! - Be sure to make a full 16 MiB backup of your device before flashing the new u-boot! This is needed if you ever have interest in reverting back to stock firmware. Not working: - TPM (needs a driver) Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ramips: add factory image for WNDR3700v5Jan Hoffmann2019-05-183-17/+24
| | | | | | | | | This uses the existing rules for Sercomm factory images and moves them to the ramips image Makefile, so they can be used in all subtargets. The new factory image for WNDR3700v5 can be flashed using nmrpflash. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 23:11:05 +0000