aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* kernel: bump 5.4 to 5.4.168Hauke Mehrtens2021-12-2825-56/+56
| | | | | | | | | All updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* apm821xx: fix WD MyBook Live DUO USB-PortChristian Lamparter2021-12-272-1/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | where to begin? the USB regulator settings were just a part of the issue. With them changed, according to the forum it still failed when a USB device was connected to the port with: dwc2 4bff80000.usbotg: dwc2_restore_global_registers: no global registers to restore dwc2 4bff80000.usbotg: dwc2_exit_partial_power_down: failed to restore registers dwc2 4bff80000.usbotg: exit partial_power_down failed dwc2 4bff80000.usbotg: HC died; cleaning up One clue was found upstream in commit cc10ce0c51b1 ("usb: dwc2: disable power_down on Amlogic devices") |Disable power_down by setting the parameter to |DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic |Meson SoCs where USB devices are only recognized when plugged in before |booting Linux. A hot-plugged USB device was not detected even though the |device got power (my USB thumb drive for example has an LED which lit |up). |[...] the same method proposed there worked with APM821xx's USB IP-Core. Link: https://forum.openwrt.org/t/wd-my-book-duo-usb/111926/2 Reported-by: thwe and takimata (openwrt forum) Fixes: b70d3557e05 ("apm821xx: clean up gpio-hogs") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 832b9cbd741cdb6cc8483b2cddfef6de000ec61d)
* hostapd: only attempt to set qos map if supported by the driverFelix Fietkau2021-12-232-1/+13
| | | | | | | Fixes issues with brcmfmac Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 5e67cd63c4ff5d8f36c341dfa3355e3a4ac2be81)
* mac80211: optimize airtime fairness code to reduce cpu usageFelix Fietkau2021-12-211-0/+60
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 87def9efd8cee66da3bd3961671e580282427c2e)
* kernel: backport the upstream implementation of threaded NAPI to 5.4Felix Fietkau2021-12-2112-376/+692
| | | | | | | | The workqueue based implementation has a few corner cases and typically lower performance than the upstream one Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 01bebc070c35d87c24a594fff7ee1911965759aa)
* mac80211: Update toversion 5.10.85Hauke Mehrtens2021-12-1428-140/+65
| | | | | | | | | The following patches were backported from upstream before and are not needed any more: package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch package/kernel/mac80211/patches/subsys/307-mac80211-do-not-access-the-IV-when-it-was-stripped.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: sysupgrade: fix support for Luxul's legacy firmware formatRafał Miłecki2021-12-131-1/+3
| | | | | | Fixes: c808c55b398c ("bcm53xx: sysupgrade: refactor handling different firmware formats") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3bcf3e8143160e447c22c0ac3fa66fbcf6a59eef)
* bcm4908: build chk image for Netgear RAXE500Rafał Miłecki2021-12-131-1/+1
| | | | | | Fixes: 63ba3eaccdde ("bcm4908: start working on Netgear RAXE500 image") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0e8a5acf6eb4c689b6deed2146010b5b2c54fa78)
* bcm4908: start working on Netgear RAXE500 imageRafał Miłecki2021-12-132-0/+36
| | | | | | | | | bootfs still needs more work before it's ready. For some unknown reason model RAXE500 uses board id RAX220. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 63ba3eaccddeb8058b0fabd69197e650735573bc)
* bcm4908: enable MTD_CMDLINE_PARTSRafał Miłecki2021-12-131-0/+1
| | | | | | | | It's needed to support devices with U-Boot. That bootloader passes MTD layout using cmdline. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 21d28adbc1cc98c55858a73d62b9bf89c3874b08)
* bcm4908: continue work on images for U-Boot based devicesRafał Miłecki2021-12-133-0/+96
| | | | | | | It still isn't ready though - more data needs to be added to the bootfs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 494c033f9cbad67ea2cee3860894bdfffea65109)
* bcm4908: backport upstream DT commitsRafał Miłecki2021-12-137-8/+234
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d745835ae19caf1999924a434abd25e92cce4343)
* bcm4908: add watchdog supportRafał Miłecki2021-12-133-0/+77
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9565bd9bd61f026effce7ebfe17d413d1adb032f)
* bcm4908: start work on images for devices using U-BootRafał Miłecki2021-12-132-0/+36
| | | | | | | | | | | | | | | | | | | | | New BCM4908 family based routers will use U-Boot bootloader. That will require using a totally different firmware format. Kernel has to be put in a FIT image. OpenWrt has some helpers for generating .its files but they don't fit BCM4908 requirements and there is no simple way of extending any of them. The best solution seems to be storing an .its template. BCM4908 bootfs may: 1. contain extra binaries (other than kernel & DTB) 2. include multiple DTB files 3. store device specific U-Boot configurations with custom properties Such setups are too complex to generate using shell script. Raw .its file on the other hand seems quire clean & reasonable. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a02c971dff934a11ddadf7ffd850dabcab5a3cdf)
* bcm4908img: detect Linksys imagesRafał Miłecki2021-12-132-1/+23
| | | | | | | Linksys uses an extra 0x100 bytes long tail for BCM4908 images. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c4d5e60f6115b9a97318774533ea764bf938c2a9)
* bcm4908img: store offset of tail dataRafał Miłecki2021-12-132-11/+14
| | | | | | | | This simplifies some operations as it doesn't have to be caculated over and over. It will also allow adding support for more vendor formats. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 063038bcef39802aa65c196a162067f66e5c8621)
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-12-131-4/+4
| | | | | | | e5050f3 linksys: ea9500-v2: add cferam file Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0b2c1997e988552a4bb52dda88eccf4896fbb61b)
* bcm53xx: sysupgrade: refactor handling different firmware formatsRafał Miłecki2021-12-131-165/+123
| | | | | | | | | | | | | | | | | | | List of supported formats grew over time and implementation got a bit messy. There are multiple functions with format-specific parameters and commands. Refactor it by making platform_identify() setup all required info right after detecting firmware format. This simplifies formats handling in platform_other_check_image() and platform_do_upgrade() a lot. This has been tested on: 1. SmartRG SR400ac (TRX): non-NAND sysupgrade 2. Netgear R8000 (CHK): NAND aware and standard sysupgrade-s 3. D-Link DIR-885L (Seama): NAND aware and standard sysupgrade-s 4. Luxul XWR-3150 (LXL): NAND aware and standard sysupgrade-s Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 80041dea7094f46f9ef5402964c95b0a5dcd5f28)
* bcm53xx: sysupgrade: simplify extracting image from Seama sealRafał Miłecki2021-12-131-15/+3
| | | | | | | Use "oseama extract" which supports now writing to stdout. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e7bd6cce4c382e33a62c462bf07bafba23b22e1a)
* bcm53xx: enable Linksys EA6300 & EA9200 buildsRafał Miłecki2021-12-131-3/+0
| | | | | | | | | | | Both should be supported since: 1. Adding NVMEM driver for NVRAM 2. Using NVRAM info for determining active firmware partition Linksys EA9500 uses very similar design and works fine. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 287257d676b1120f388120f1dc259e4eefd3b163)
* bcm53xx: backport the latest upstream DT changesRafał Miłecki2021-12-136-1/+386
| | | | | | | | | This includes: 1. BCM5301X changes from 5.14 and queued 5.15 stuff 2. NSP changes from 5.11 - 5.15 for kernel 5.10 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit bce00f47e5d67e5a33e9d7fa137cbe0a5d3d334b)
* bcm53xx: fix Luxul XWR-3150 LAN ports numberingRafał Miłecki2021-12-131-1/+1
| | | | | | | | Port numbers were reverted. Fixes: c459a6bf482f ("bcm53xx: add support for Luxul FullMAC WiFi devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 53546c3e945f5a0a8f8c62311f48c6f21c9ab0a8)
* otrx: update to the latest masterRafał Miłecki2021-12-131-3/+3
| | | | | | | | | | | 56e8e19 otrx: support TRX from stdin when extracting a37ccaf otrx: support unsorted partitions offsets 1fa145e otrx: extract shared code opening & parsing TRX format 4ecefda otrx: allow validating TRX from stdin cf01e69 otrx: avoid unneeded fseek() when calculating CRC32 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 942facd14f0a13fa3aeb4238d866e764f5caec8c)
* otrx: use firmware-utils.git to avoid code duplicationRafał Miłecki2021-12-133-603/+10
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7c4d79aa1c3595e2be36d1449cf63404f301f748)
* kernel: bump 5.4 to 5.4.163Hauke Mehrtens2021-12-12111-847/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for Xiaomi AIoT Router AC2350Evgeniy Isaev2021-12-125-1/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications * SoC: QCA9563 @ 775MHz (MIPS 74Kc) * RAM: 128MiB DDR2 * Flash: 16MiB SPI-NOR (EN25QH128) * Wireless 2.4GHz (SoC): b/g/n, 3x3 * Wireless 5Ghz (QCA9988): a/n/ac, 4x4 MU-MIMO * IoT Wireless 2.4GHz (QCA6006): currently unusable * Ethernet (AR8327): 3 LAN × 1GbE, 1 WAN × 1GbE * LEDs: Internet (blue/orange), System (blue/orange) * Buttons: Reset * UART: through-hole on PCB ([VCC 3.3v](RX)(GND)(TX) 115200, 8n1) * Power: 12VDC, 1,5A MAC addresses map (like in OEM firmware) art@0x0 88:C3:97:*:57 wan/label art@0x1002 88:C3:97:*:2D lan/wlan2g art@0x5006 88:C3:97:*:2C wlan5g Obtain SSH Access 1. Download and flash the firmware version 1.3.8 (China). 2. Login to the router web interface and get the value of `stok=` from the URL 3. Open a new tab and go to the following URL (replace <STOK> with the stok value gained above; line breaks are only for easier handling, please put together all four lines into a single URL without any spaces): http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev ?bssid=any&user_id=any&ssid=-h%0Anvram%20set%20ssh_en%3D1%0Anvram%20commit %0Ased%20-i%20%27s%2Fchannel%3D.%2A%2Fchannel%3D%5C%5C%22debug%5C%5C%22%2F g%27%20%2Fetc%2Finit.d%2Fdropbear%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A 4. Wait 30-60 seconds (this is the time required to generate keys for the SSH server on the router). Create Full Backup 1. Obtain SSH Access. 2. Create backup of all flash (on router): dd if=/dev/mtd0 of=/tmp/ALL.backup 3. Copy backup to PC (on PC): scp root@192.168.31.1:/tmp/ALL.backup ./ Tip: backup of the original firmware, taken three times, increases the chances of recovery :) Calculate The Password * Locally using shell (replace "12345/E0QM98765" with your router's serial number): On Linux printf "%s6d2df50a-250f-4a30-a5e6-d44fb0960aa0" "12345/E0QM98765" | \ md5sum - | head -c8 && echo On macOS printf "%s6d2df50a-250f-4a30-a5e6-d44fb0960aa0" "12345/E0QM98765" | \ md5 | head -c8 * Locally using python script (replace "12345/E0QM98765" with your router's serial number): wget https://raw.githubusercontent.com/eisaev/ax3600-files/master/scripts/calc_passwd.py python3.7 -c 'from calc_passwd import calc_passwd; print(calc_passwd("12345/E0QM98765"))' * Online https://www.oxygen7.cn/miwifi/ Debricking (lite) If you have a healthy bootloader, you can use recovery via TFTP using programs like TinyPXE on Windows or dnsmasq on Linux. To switch the router to TFTP recovery mode, hold down the reset button, connect the power supply, and release the button after about 10 seconds. The router must be connected directly to the PC via the LAN port. Debricking You will need a full dump of your flash, a CH341 programmer, and a clip for in-circuit programming. Install OpenWRT 1. Obtain SSH Access. 2. Create script (on router): echo '#!/bin/sh' > /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh echo '. /bin/boardupgrade.sh' >> /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh echo 'board_prepare_upgrade' >> /tmp/flash_fw.sh echo 'mtd erase rootfs_data' >> /tmp/flash_fw.sh echo 'mtd write /tmp/openwrt.bin firmware' >> /tmp/flash_fw.sh echo 'sleep 3' >> /tmp/flash_fw.sh echo 'reboot' >> /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh chmod +x /tmp/flash_fw.sh 3. Copy `openwrt-ath79-generic-xiaomi_aiot-ac2350-squashfs-sysupgrade.bin` to the router (on PC): scp openwrt-ath79-generic-xiaomi_aiot-ac2350-squashfs-sysupgrade.bin \ root@192.168.31.1:/tmp/openwrt.bin 4. Flash OpenWRT (on router): /bin/ash /tmp/flash_fw.sh & 5. SSH connection will be interrupted - this is normal. 6. Wait for the indicator to turn blue. Signed-off-by: Evgeniy Isaev <isaev.evgeniy@gmail.com> [improve commit message formatting slightly] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 6c148116f778bfd2db88476cee4753b32538eafe)
* ramips: fix tl-mr3020-v3 switch topology to configure vlans via luciSergey V. Lobanov2021-12-051-1/+4
| | | | | | | | | | | Currently it is not possible to configure VLANs via LUCI on tplink tl-mr3020-v3. This patch fixes switch topology for the LUCI interface. Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in> [copied commit message from github PR] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit e22c91e144d63ccbd7b76b370a53652c48db1d6f)
* busybox: update to 1.33.2 bugfix releaseHannu Nyman2021-12-041-2/+2
| | | | | | | | | | | Update busybox to 1.33.2, which includes only 5 commits after 1.33.1 Bug fix release. 1.33.2 has fixes for hush and ash (parsing fixes) and unlzma (fix where we could read before beginning of buffer). https://git.busybox.net/busybox/log/?h=1_33_2 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mt76: update to the latest versionFelix Fietkau2021-12-031-3/+3
| | | | | | | | | | 71e08471ab56 mt76: eeprom: fix return code on corrected bit-flips 9a8fc6636d83 mt76: move sar_capa configuration in common code 7cdbea1dc82a mt76: only access ieee80211_hdr after mt76_insert_ccmp_hdr 678071ef7029 mt76: mt7615: clear mcu error interrupt status on mt7663 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit fc4398fe71810f3bb5637bdfd0b3975a8ec858f0)
* mac80211: bump PKG_RELEASEFelix Fietkau2021-12-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix tx aggregation locking issueFelix Fietkau2021-12-021-0/+79
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit a1a71a71999001502fa86136dbf8925da8341098)
* mac80211: fix queue assignment of aggregation start requestsFelix Fietkau2021-12-021-0/+28
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 15d8c7aa74c202c530dbd53e53b00e418f0b64f4)
* mt76: update to the latest versionFelix Fietkau2021-12-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | a6451fea5a3d mt76: mt7615: improve wmm index allocation 1911486414dc mt76: mt7915: improve wmm index allocation 7998a41d1321 mt76: clear sta powersave flag after notifying driver 664475574438 mt76: mt7603: introduce SAR support 5c0da39c940b mt76: mt7915: introduce SAR support 77fc6c439a32 mt76: mt7603: improve reliability of tx powersave filtering 094b3d800835 firmware: update mt7663 rebb firmware to 20200904171623 25237b19bcc1 mt76: eeprom: tolerate corrected bit-flips 1463cb4c6ac2 mt76: mt7921: fix boolreturn.cocci warning 586bad6020f7 mt76: mt7921: use correct iftype data on 6GHz cap init 8ec95c910425 mt76: mt7921s: fix bus hang with wrong privilege 688e30c7d854 firmware: update mt7921 firmware to version 20211014 6fad970893dd mt76: fix key pointer overwrite in mt7921s_write_txwi/mt7663_usb_sdio_write_txwi 95acf972750c mt76: fix 802.3 RX fail by hdr_trans 3f402b0cf6c0 mt76: mt7921s: fix possible kernel crash due to invalid Rx count 929a03a8d65d mt76: connac: fix last_chan configuration in mt76_connac_mcu_rate_txpower_band Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 7e153900566ec1aebdc4f15f5a9d9ff9b9401cc1)
* uboot-lantiq: danube: fix hanging lzma kernel uncompression #2Mathias Kresin2021-11-271-0/+9
| | | | | | | Follow up to commit c744798cad6a13436f2ba9dd3a280cb16d315c85. Managed to hit the very same issue again while playing with the NOR SPL builds. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: set maximum kernel size for P2812HNUF3Mathias Kresin2021-11-271-0/+2
| | | | | | | | | | | The board has a fixed size kernel partition but do not limit the kernel size during image building. Disable image building for both boards as well, since the kernel of the last release as well as master are to big to fit into the 2 MByte kernel partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: backport fix for dealing with stripped IV on rxFelix Fietkau2021-11-263-11/+37
| | | | | | | This fixes potental rx drop issues Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 68189835ac81779f9cf21060dca0c54dcdb0c0a6)
* hostapd: add a patch that allows processing auth requests for peers in ↵Felix Fietkau2021-11-245-9/+43
| | | | | | | | | | | | | | | | blocked state If authentication fails repeatedly e.g. because of a weak signal, the link can end up in blocked state. If one of the nodes tries to establish a link again before it is unblocked on the other side, it will block the link to that other side. The same happens on the other side when it unblocks the link. In that scenario, the link never recovers on its own. To fix this, allow restarting authentication even if the link is in blocked state, but don't initiate the attempt until the blocked period is over. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit f84053af5c0b0a159ea4d3e90b0c06574b4fde8d)
* hostapd: bump PKG_RELEASEFelix Fietkau2021-11-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: bump PKG_RELEASEFelix Fietkau2021-11-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a fix for kernel warnings when forwarding packets in mesh modeFelix Fietkau2021-11-243-11/+73
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit d439c7d85a05c3548e5566bec292292a4f6b7ef5)
* mac80211: fix regression in SSN handling of addba txFelix Fietkau2021-11-242-2/+46
| | | | | | | | | Some drivers that do their own sequence number allocation (e.g. ath9k, mwlwifi) rely on being able to modify params->ssn on starting tx ampdu sessions. This was broken by a change that modified it to use sta->tid_seq[tid] instead. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit ddd977fcc5838eb6bfb6cb9dad99dfe09a8ff67e)
* hostapd: fix goto loop for ubus assoc handlerDavid Bauer2021-11-231-5/+5
| | | | | | | | | | When a ubus event handler denies a association with a non-zero return value, the code jumps to preceeding code, creating an endless loop until the event handler accepts the assc request. Move the ubus handler further up the code to avoid creating such a loop. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: enable ht40 in wpa_supplicant when using wider HE modesFelix Fietkau2021-11-231-1/+1
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit c26d741d07632451337810aaecd500a0b3cbf44f)
* hostapd: add support for providing vendor specific IE elementsFelix Fietkau2021-11-231-1/+4
| | | | | | | They can be added as hex digit strings via the 'vendor_elements' option Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 1818b038d7275273adbd525b5ee76bc60b7d628c)
* hostapd: add eap_server supportJohn Crispin2021-11-231-4/+21
| | | | | | | | This makes it possible to avoid using a RADIUS server for WPA enterprise authentication Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from 98621c97822eb20a80ab2248a253972051ea6f08)
* hostapd: add default values for r0kh/r1khFelix Fietkau2021-11-231-0/+7
| | | | | | | | This allows WPA enterprise roaming in the same mobility domain without any manual key configuration (aside from radius credentials) Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 704ab6a002172e76d41612f6d07ff179ef035d10)
* hostapd: add support for configuring the beacon rateFelix Fietkau2021-11-231-1/+3
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 46509a51dd63aa49648ad0f130461817f43532d0)
* hostapd: add support for configuring rts thresholdFelix Fietkau2021-11-231-1/+4
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 26da5c235983d215a42983467149e0e5597e8de2)
* hostapd: fix use after free bugsDavid Bauer2021-11-231-6/+6
| | | | | | | | Using a pointer one lifter after it freed is not the best idea. Let's not do that. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry-picked from commit 63c01ad025981eaa841353dc0fc27e5017febe21)
* hostapd: add wmm qos map set by defaultFelix Fietkau2021-11-231-1/+6
| | | | | | | | | | | This implements the mapping recommendations from RFC8325, with an update from RFC8622. This ensures that DSCP marked packets are properly sorted into WMM classes. The map can be disabled by setting iw_qos_map_set to something invalid like 'none' Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit a5e3def1822431ef6436cb493df77006dbacafd6)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 10:10:55 +0000