aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: add support for GD25D05 SPI NORKoen Vandeputte2020-02-041-0/+29
| | | | | | | | | | | | | | | | | | | | | | This chip is used on newer RB912UAG-5HPnD r2 boards: Before: [ 0.642553] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 10 [ 0.649381] NAND flash driver for the RouterBOARD 91x series After: [ 0.641714] m25p80 spi0.0: found gd25d05, expected m25p80 [ 0.649916] m25p80 spi0.0: gd25d05 (64 Kbytes) [ 0.655122] Creating 4 MTD partitions on "spi0.0": [ 0.660164] 0x000000000000-0x00000000c000 : "routerboot" [ 0.667782] 0x00000000c000-0x00000000d000 : "hard_config" [ 0.675073] 0x00000000d000-0x00000000e000 : "bios" [ 0.682613] 0x00000000e000-0x00000000f000 : "soft_config" [ 0.690304] NAND flash driver for the RouterBOARD 91x series Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.169Koen Vandeputte2020-02-04102-369/+330
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-14896 - CVE-2019-14897 Remove upstreamed: - 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch Altered patches: - 102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch - 105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch - 106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch - 108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch - 207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch - 350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch - 356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch - 390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch - 391-MIPS-BCM63XX-do-not-register-uart.patch - 392-MIPS-BCM63XX-remove-leds-and-buttons.patch - 416-BCM63XX-add-a-fixup-for-ath9k-devices.patch - 422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch - Compile-tested on: brcm63xx, cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.212Koen Vandeputte2020-02-0412-54/+54
| | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-14896 - CVE-2019-14897 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* OpenWrt v18.06.7: revert to branch defaultsJo-Philipp Wich2020-01-295-11/+9
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* OpenWrt v18.06.7: adjust config defaultsv18.06.7Jo-Philipp Wich2020-01-295-9/+11
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* opkg: update to latest Git HEADJo-Philipp Wich2020-01-291-3/+3
| | | | | | | | | 80d161e opkg: Fix -Wformat-overflow warning c09fe20 libopkg: fix skipping of leading whitespace when parsing checksums Fixes: CVE-2020-7982 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit c69c20c6670081d1eaab000734d89de57eb64148)
* libubox: backport security patchesHauke Mehrtens2020-01-2717-1/+1097
| | | | | | | | | | | | | | This backports some security relevant patches from libubox master. These patches should not change the existing API and ABI so that old applications still work like before without any recompilation. Application can now also use more secure APIs. The new more secure interfaces are also available, but not used. OpenWrt master and 19.07 already have these patches by using a more recent libubox version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: ltq-ptm: vr9: fix skb handling in ptm_hard_start_xmit()Martin Schiller2020-01-262-1/+4
| | | | | | | | | | | Call skb_orphan(skb) to call the owner's destructor function and make the skb unowned. This is necessary to prevent sk_wmem_alloc of a socket from overflowing, which leads to ENOBUFS errors on application level. Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit 996f02e5bafad2815e72821c19d41fb5297e4dad)
* tools/expat: Update to version 2.2.9Josef Schlehofer2020-01-261-2/+2
| | | | | | | | | Fixes two CVEs: - CVE-2019-15903 (Fix heap overflow triggered by XML_GetCurrentLineNumber) - CVE-2018-20843 (Fix extraction of namespace prefixes from XML names) Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit b4af2c689fc8736777940b7bbf009bb1672296ec)
* mbedtls: update to 2.16.4Magnus Kroken2020-01-262-31/+31
| | | | | | | | | | | | | | | | Fixes side channel vulnerabilities in mbed TLS' implementation of ECDSA. Release announcement: https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.4-and-2.7.13-released Security advisory: https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2019-12 Fixes: * CVE-2019-18222: Side channel attack on ECDSA Signed-off-by: Magnus Kroken <mkroken@gmail.com> (cherry picked from commit 6e96fd90471a49185bcfe9dcb4844d444674ecab)
* kernel: bump 4.14 to 4.14.167Koen Vandeputte2020-01-242-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.211Koen Vandeputte2020-01-247-11/+11
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kirkwood: fix HDD LED labels for Zyxel NSA325 in 01_ledsStephan Knauss2020-01-211-2/+2
| | | | | | | | | | Change the LED labels for hdd1/hdd2 in 01_leds to match their counterpart in DTS. Signed-off-by: Stephan Knauss <openwrt@stephans-server.de> [improve commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit fbf297be38a93b9ca1119e5aaffecd2299087aa5)
* brcm47xx: fix switch port order for Netgear WN2500RP V1Walter Sonius2020-01-211-0/+5
| | | | | | | | | | | | | | The Netgear WN2500RP V1 switch0 already works for LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: 4 / 3 / 2 / 1 WAN port is absent on this device and therefore removed from switch config. Signed-off-by: Walter Sonius <walterav1984@gmail.com> [move block to maintain alphabetic sorting] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 098cbc68ee23db589ed6f0d081fe26cc385462f2)
* brcm47xx: fix switch port order for Netgear WNR3500 V2Walter Sonius2020-01-211-1/+2
| | | | | | | | | | | | The Netgear WNR3500 V2 switch0 already works for WAN/LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: Internet / 4 / 3 / 2 / 1 this resembles the Linksys E3000 V1. Verfied with imagebuilder edit FILES=/etc/board.d/01_network Signed-off-by: Walter Sonius <walterav1984@gmail.com> (cherry picked from commit cf2f1fc6871da0320afeefaa799af87fc7c0d1db)
* ramips: fix HiWiFi HC5962 switch configurationDENG Qingfang2020-01-211-1/+4
| | | | | | | | HC5962 has only 3 LAN ports, switch port 0 is unused Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> (backported from commit 68f49df31507454f86b72a5c1e250505176baed7) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 4.14 to 4.14.166Koen Vandeputte2020-01-201-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.165Koen Vandeputte2020-01-202-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.210Koen Vandeputte2020-01-204-5/+5
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.164Koen Vandeputte2020-01-2022-104/+104
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.209Koen Vandeputte2020-01-204-5/+5
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ethtool: fix PKG_CONFIG_DEPENDSMatthias Schiffer2020-01-071-1/+1
| | | | | | | Add missing CONFIG_ prefix. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 41c19dd542973dbc1336ecceaa32777506933cdf)
* OpenWrt v18.06.6: revert to branch defaultsHauke Mehrtens2020-01-065-11/+9
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v18.06.6: adjust config defaultsv18.06.6Hauke Mehrtens2020-01-065-9/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: remove duplicate dts nodes of MediaTek LinkIt Smart 7688Jack Chen2020-01-051-4/+0
| | | | | | | | There are two identical wmac nodes in the dts file of MediaTek LinkIt Smart 7688, so delete one of them. Signed-off-by: Jack Chen <redchenjs@live.com> (cherry picked from commit 4be271a4867dcf57a122eeb7b42407e7a506915e)
* sunxi: Turn on CONFIG_PINCTRL_SUN4I_A10 for A20Florian Fainelli2020-01-051-1/+1
| | | | | | | | | | | CONFIG_PINCTRL_SUN4I_A10 controls both the A10 and the A20 enablong of the pinctrl driver, this is necessary since upstream commit 5d8d349618a9464714c07414c5888bfd9416638f ("pinctrl: sunxi: add A20 support to A10 driver") which has been included in v4.13 and onwards. Fixes: ad2b3bf310f7 ("sunxi: Add support for kernel 4.14") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> (cherry picked from commit 32e4eaef1b4c2a7fa44787813fdf715b2ba500d9)
* kernel: bump 4.9 to 4.9.208Hauke Mehrtens2020-01-058-23/+23
| | | | | | | | | Refreshed all patches. Compile-tested on: lantiq Runtime-tested on: lantiq Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.162Hauke Mehrtens2020-01-057-22/+22
| | | | | | | | | Refreshed all patches. Compile-tested on: ramips Runtime-tested on: ramips Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: fix inverted reset button for Ravpower WD03Moritz Warning2020-01-031-1/+1
| | | | | | | The button events "pressed" and "released" were switched. Tested with v18.06.4. Signed-off-by: Moritz Warning <moritzwarning@web.de> (cherry picked from commit 3e1325b219fced91f01d5594503f61d326a93b90)
* ar71xx: really fix Mikrotik board detectionKoen Vandeputte2020-01-021-0/+1
| | | | | | | | | | | | | | | | | | commit e09da0169a08 ("ar71xx: fix Mikrotik board detection") was generated based on testing a rb-912 board, on which detection failed. Testing on more hardware shows something fun: machine : MikroTik RouterBOARD 922UAGS-5HPacD machine : Mikrotik RouterBOARD 912UAG-5HPnD Both lowercase and uppercase are used. So ensure we support both now .. Fixes: e09da0169a08 ("ar71xx: fix Mikrotik board detection") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 845b2a1cfe307394f3f2144cce085bbb5e171ecc)
* ar71xx: fix Mikrotik board detectionKoen Vandeputte2020-01-021-1/+1
| | | | | | | | | | | | Fix a typo in the machine type being extracted from /proc/cpuinfo which causes all Mikrotik board to be undetected properly. This lead to sysupgrade issues and probably some others too. Fixes: acf2b6c8881b ("ar71xx: base-files: fix board detect on new MikroTik devices") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit e09da0169a088663f6dab1f71b2a4b690eab21d3)
* ar71xx: base-files: fix board detect on new MikroTik devicesHenryk Heisig2020-01-021-132/+149
| | | | | | | | | | | | | | | | | | | | | | Move all MikroTik devices to new function to increase script execution speed. Machine name in new version of MikroTik RouterBOARD devices add "RB" before model name: Old machine name: MikroTik RouterBOARD 951Ui-2nD New: MikroTik RouterBOARD RB951Ui-2nD So this patch should fix it for all currently supported MikroTik boards. Signed-off-by: Henryk Heisig <hyniu@o2.pl> [rebased,commit message facelift,script fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz> [spotted missing 922UAGS-5HPacD] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit acf2b6c8881b432530bd98fa86753bf6a3546ff7) [backport: do not add boards not supported in 18.06] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: fix RB941-2nD detectionJulien Rabier2020-01-021-1/+1
| | | | | | | | | | | | | Some hAP lite routers aren't detected because /proc/cpuinfo shows "RouterBOARD RB941-2nD" instead of "RouterBOARD 941-2nD". Fix that. Signed-off-by: Julien Rabier <taziden@flexiden.org> [Alter string to include all flavours + slight rewrite of commit msg] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 6570f3c93aa4110efd1466a6b89742c2e11d7c11)
* kernel: bump 4.14 to 4.14.161Hauke Mehrtens2020-01-0114-91/+91
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx Runtime-tested on: none Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: Fix CVE-2019-5094 in libsupportHauke Mehrtens2020-01-012-1/+204
| | | | | | | | | This adds the following patch from debian: https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git/commit/?h=debian/stable&id=09fe1fd2a1f9efc3091b4fc61f1876d0785956a8 libsupport: add checks to prevent buffer overrun bugs in quota code Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 0062aad8ecc9bbe36c55895fd78fcaf9a406b006)
* openssl: update to version 1.0.2uJosef Schlehofer2020-01-011-2/+2
| | | | | | Fixes CVE-2019-1551 (rsaz_512_sqr overflow bug) on x86_x64 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: bump 4.9 to 4.9.207Hauke Mehrtens2019-12-2631-68/+68
| | | | | | | | | Refreshed all patches. Compile-tested on: lantiq Runtime-tested on: none Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.160Hauke Mehrtens2019-12-268-12/+12
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx Runtime-tested on: none Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.159Koen Vandeputte2019-12-2542-141/+141
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-19332 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* scripts/dowload.pl: add archive.apache.org to apache mirror listJiri Kastner2019-12-231-0/+1
| | | | | | | | | apache mirrors holds only latest releases, to download older releases, one must use archive.apache.org to get them. Signed-off-by: Jiri Kastner <cz172638@gmail.com> (cherry picked from commit dc34c695c4faa46efc6e2367a2ba06a47caa4840)
* kernel: fix *-gpio-custom module unloadingSungbo Eo2019-12-234-6/+6
| | | | | | | | | | | | | | | | | | | | | | Unloading and reloading the modules fails, as platform_device_put() does not release resources fully. root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5 [ 196.860620] Custom GPIO-based I2C driver version 0.1.1 [ 196.871162] ------------[ cut here ]------------ [ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158 [ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0' ... [ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory. This patch fixes it by replacing platform_device_put() to platform_device_unregister(). Fixes: da7740853715 ("i2c-gpio-custom: minor bugfix") Fixes: 3bc81edc70e8 ("package: fix w1-gpio-custom package (closes #6770)") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit a22b7a60d98836343c4f7b9ec0fcae68d9131522)
* toolchain/gcc: correct the check expr for newer clangYorkie Liu2019-12-231-1/+1
| | | | | | | | This fixes gcc build error within clang 11.0, it tweaks the version string from LLVM to clang. Signed-off-by: Yorkie Liu <yorkiefixer@gmail.com> (cherry picked from commit 65a561fd0919eafff2363ae8324db64be2a57f77)
* lantiq: fix phys ledAleksander Jan Bajkowski2019-12-232-4/+4
| | | | | | | | | led2l and led2h value is incorrectly set by led3l and led3h. Bug was introduced in commit: 863e79f8d5544a8a884375d7e867f350fddca9b9 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> Fixes: 863e79f8d554 ("lantiq: add support for kernel 4.9") (cherry picked from commit 692390225d76de8f2daf582454e74942b82d090a)
* uhttpd: update to latest Git HEADJo-Philipp Wich2019-12-221-4/+4
| | | | | | | | | 5f9ae57 client: fix invalid data access through invalid content-length values 6b03f96 ubus: increase maximum ubus request size to 64KB 91fcac3 uhttpd: Fix multiple format string problems Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commit f34f9a414dd32311bda950776eb77e63c0c772cb)
* netifd: add support for suppressing the DHCP request hostname by setting it to *Felix Fietkau2019-12-221-0/+2
| | | | | | | | | | dnsmasq (and probably other DHCP servers as well) does not like to hand out leases with duplicate host names. Adding support for skipping the hostname makes it easier to deploy setups where it is not guaranteed to be unique Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit fd8ca8deb3197a2867d85fc3513f5aa70912ee40)
* ar71xx: fix MAC address setup for TL-WDR4300 boardSungbo Eo2019-12-212-1/+5
| | | | | | | | | | | | | | | | | | The current ethernet MAC address setup of TL-WDR4300 board is different from the setup of stock firmware: OpenWrt: lan = label_mac -2, wan = label_mac -2 stock: lan = label_mac, wan = label_mac +1 This patch applies to all devices using TL-WDR4300 board: TL-WDR3600 v1 TL-WDR4300 v1 TL-WDR4300 v1 (IL) TL-WDR4310 v1 Mercury MW4530R v1 Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 9b02d32e34df2bb8821ec6f08f525bee22d0d1ba)
* ramips: fix number of LAN Ports for Mikrotik RBM33GMartin Schiller2019-12-111-1/+4
| | | | | | | | | The Mikrotik RBM33G has only 2 LAN ports. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [moved node in 02_network to maintain alphabetic sorting; backport] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 3a55c7935d4efdc86575601cb4aa7bc94e3c5e44)
* ramips: fix switch port order for TP-Link Archer C20iWalter Sonius2019-12-111-1/+1
| | | | | | | | | | | | | | | | | | | Physical port order watched from the backside of the C20i (from left to right) is: Internet / 1 / 2 / 3 / 4 Physical Port Switch port WAN 0 LAN 3 1 LAN 4 2 LAN 1 3 LAN 2 4 (not used) 5 CPU 6 Signed-off-by: Walter Sonius <walterav1984@gmail.com> [commit message/title improvements; backport to 18.06] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a065cd29bf2dfd1ce1f07becd65aef96cec658e7)
* kernel: bump 4.14 to 4.14.158Koen Vandeputte2019-12-1017-39/+39
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 400-mtd-add-rootfs-split-support.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.206Koen Vandeputte2019-12-1018-52/+52
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 400-mtd-add-rootfs-split-support.patch Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 02:33:54 +0000