aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* dtc: update to 1.7.0Nick Hainke2023-03-052-139/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changelog: 039a994 Bump version to v1.7.0 3f29d6d pylibfdt: add size_hint parameter for get_path 2022bb1 checks: Update #{size,address}-cells check for 'dma-ranges' abbd523 pylibfdt: Work-around SWIG limitations with flexible arrays a41509b libfdt: Replace deprecated 0-length arrays with proper flexible arrays 2cd89f8 dtc: Warning rather than error on possible truncation of cell values 55778a0 libfdt: tests: add get_next_tag_invalid_prop_len 7359034 libfdt: prevent integer overflow in fdt_next_tag 035fb90 libfdt: add fdt_get_property_by_offset_w helper 98a0700 Makefile: fix infinite recursion by dropping non-existent `%.output` a036cc7 Makefile: limit make re-execution to avoid infinite spin c6e9210 libdtc: remove duplicate judgments e37c256 Don't generate erroneous fixups from reference to path 5045465 libfdt: Don't mask fdt_get_name() returned error e64a204 manual.txt: Follow README.md and remove Jon f508c83 Update README in MANIFEST.in and setup.py to README.md c2ccf8a Add description of Signed-off-by lines 90b9d9d Split out information for contributors to CONTRIBUTING.md 0ee1d47 Remove Jon Loeliger from maintainers list b33a73c Convert README to README.md 7ad6073 Allow static building with meson fd9b8c9 Allow static building with make fda71da libfdt: Handle failed get_name() on BEGIN_NODE c7c7f17 Fix test script to run also on dash shell 01f23ff Add missing relref_merge test to meson test list ed31080 pylibfdt: add FdtRo.get_path() c001fc0 pylibfdt: fix swig build in install 26c54f8 tests: add test cases for label-relative path references ec7986e dtc: introduce label relative path references 651410e util: introduce xstrndup helper 4048aed setup.py: fix out of tree build ff5afb9 Handle integer overflow in check_property_phandle_args() ca72944 README: Explain how to add a new API function c0c2e11 Fix a UB when fdt_get_string return null cd5f69c tests: setprop_inplace: use xstrdup instead of unchecked strdup a04f690 pylibfdt: add Property.as_*int*_array() 8310271 pylibfdt: add Property.as_stringlist() d152126 Fix Python crash on getprop deallocation 17739b7 Support 'r' format for printing raw bytes with fdtget 45f3d1a libfdt: overlay: make overlay_get_target() public c19a4ba libfdt: fix an incorrect integer promotion 1cc41b1 pylibfdt: Add packaging metadata db72398 README: Update pylibfdt install instructions 383e148 pylibfdt: fix with Python 3.10 23b56cb pylibfdt: Move setup.py to the top level 69a7607 pylibfdt: Split setup.py author name and email 0b106a7 pylibfdt: Use setuptools_scm for the version c691776 pylibfdt: Use setuptools instead of distutils 5216f3f libfdt: Add static lib to meson build 4eda259 CI: Cirrus: bump used FreeBSD from 12.1 to 13.0 0a3a9d3 checks: Add an interrupt-map check 8fd2474 checks: Ensure '#interrupt-cells' only exists in interrupt providers d8d1a9a checks: Drop interrupt provider '#address-cells' check 52a16fd checks: Make interrupt_provider check dependent on interrupts_extended_is_cell 37fd700 treesource: Maintain phandle label/path on output e33ce1d flattree: Use '\n', not ';' to separate asm pseudo-ops d24cc18 asm: Use assembler macros instead of cpp macros ff3a30c asm: Use .asciz and .ascii instead of .string 5eb5927 fdtdump: fix -Werror=int-to-pointer-cast 0869f82 libfdt: Add ALIGNMENT error string 69595a1 checks: Fix bus-range check 72d09e2 Makefile: add -Wsign-compare to warning options b587787 checks: Fix signedness comparisons warnings 69bed6c dtc: Wrap phandle validity check 9102211 fdtget: Fix signedness comparisons warnings d966f08 tests: Fix signedness comparisons warnings ecfb438 dtc: Fix signedness comparisons warnings: pointer diff 5bec74a dtc: Fix signedness comparisons warnings: reservednum 24e7f51 fdtdump: Fix signedness comparisons warnings Remove upstreamed: - 0001-Support-r-format-for-printing-raw-bytes-with-fdtget.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: refresh patchesNick Hainke2023-03-055-5/+5
| | | | | | | | | | | | | The last mac80211 commits did not refresh the patches. Refresh: - ath/402-ath_regd_optional.patch - ath10k/080-ath10k_thermal_config.patch - ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch - ath9k/551-ath9k_ubnt_uap_plus_hsr.patch - rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* bmips: add missing switch cpu labelÁlvaro Fernández Rojas2023-03-045-0/+5
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: kernel: power cycle the bcm6358 USB PLLDaniel González Cabanelas2023-03-044-6/+53
| | | | | | | | | | | | | Some BCM6358 based boards may detect USB2.0 high speed devices as USB1.1 full speed. This is an old well known bug, but nobody cared about it. It is quite random and hard to track. With the latest versions of Openwrt, one user confirmed that the bug is still there (tested router: HG556a). Power cycle the USB PLL to fix it. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bcm63xx: kernel: fix up bcm63268 roboswitch gpio registersDaniel González Cabanelas2023-03-0412-44/+77
| | | | | | | | | | Some BCM63268 bootloaders may leave gpio registers, related to the roboswitch, disabled before loading the OpenWrt firmware. As result of this the switch won't work. These registers, if not enabled, probably avoid forwarding packets. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bcm63xx: drop kernel 5.10 supportÁlvaro Fernández Rojas2023-03-04139-21622/+0
| | | | | | Now that the target is on kernel 5.15 this is no longer needed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: switch to Kernel 5.15 by defaultPaul Spooren2023-03-041-2/+1
| | | | | | Getting ready for the next release. Signed-off-by: Paul Spooren <mail@aparcar.org>
* bmips: check for DMA error when refilling RxSieng-Piaw Liew2023-03-041-8/+20
| | | | | | | dma_mapping_error() should be called as dma_map_single() could fail and return error. Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com>
* bmips: fix Tx cleanup when NAPI poll budget is zeroSieng-Piaw Liew2023-03-041-4/+5
| | | | | | | | | | | | NAPI poll() function may be passed a budget value of zero, i.e. during netpoll, which isn't NAPI context. Therefore, napi_consume_skb() must be given budget value instead of !force to truly discern netpoll-like scenarios. https://lore.kernel.org/netdev/20220707141056.2644-1-liew.s.piaw@gmail.com/t/#m470f5c20225e76fb08c44d6cfa2f1b739ffaaea4 Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com> [improve code format] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add BQL supportSieng Piaw Liew2023-03-041-0/+8
| | | | | | Add Byte Queue Limits support to reduce/remove bufferbloat. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
* bmips: batch process eth_type_trans() in rx pathSieng Piaw Liew2023-03-041-2/+3
| | | | | | Improve cache efficiency by running eth_type_trans() in its own loop. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
* bmips: batch process rx pathSieng Piaw Liew2023-03-041-1/+5
| | | | | | | Use netif_receive_skb_list() to batch process rx skb. This improves cache efficiency. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
* bmips: improve rx loopSieng Piaw Liew2023-03-041-2/+3
| | | | | | | | | Use existing rx processed count to track against budget, thereby making budget decrement operation redundant. rx_desc_count can be calculated outside the rx loop, making the loop a bit smaller. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
* bmips: switch to napi_build_skb() to reuse skbuff_headsSieng Piaw Liew2023-03-041-2/+2
| | | | | | | | | | napi_build_skb() reuses NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new rx or completed tx. Use napi_consume_skb() to feed the cache with skbuff_heads of completed tx so it's never empty. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
* bmips: check NAPI context when refilling rx SKBSieng Piaw Liew2023-03-041-6/+10
| | | | | | | | | | | Check if we're in NAPI context when refilling rx. Normally we're almost always running in NAPI context. Dispatch to napi_alloc_frag() directly instead of relying on netdev_alloc_frag() which does the same but with the overhead of local_bh_disable/enable. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> [improve code format] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: convert to build_skb()Sieng Piaw Liew2023-03-041-41/+61
| | | | | | | | | | | | | We can increase the efficiency of rx path by using buffers to receive packets then build SKBs around them just before passing into the network stack. In contrast, preallocating SKBs too early reduces CPU cache efficiency. Performance is slightly increased but the changes allow more potential optimizations. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> [improve code format] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: use netdev_alloc_skb() for copybreakSieng Piaw Liew2023-03-041-1/+1
| | | | | | | | | | | bmips is using Broadcom B53 DSA driver which means the ethernet driver must compensate for 6 bytes tags from the internal switch. This means using NET_IP_ALIGN actually misaligns the skb, lowering performance significantly. Therefore napi_alloc_skb() which uses NET_IP_ALIGN is changed to netdev_alloc_skb(). Performance in iperf3 is increased from ~47Mbps to 52Mbps. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
* ramips: mt7621: TP-Link EAP235/615-Wall: add poe passthrough gpio definitionsAndré Fonseca2023-03-041-0/+4
| | | | | | | | | Add the missing definitions for the PoE passthrough functionality. The relevant pin is already being exported, but it is missing from the initial board configuration file. With this change, the user is now able to toggle the PoE passthorough functionality via the uci cli Signed-off-by: André Fonseca <mail@andrefonseca.pt>
* bpf-headers: fix package categoryChukun Pan2023-03-041-1/+1
| | | | | | | This removes the non-selectable 'Kernel' item when make menuconfig. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uboot-mediatek: mark all packages as hiddenFelix Fietkau2023-03-041-0/+1
| | | | | | | They are enabled by selecting devices. Fixes build errors when enabling extra devices without creating a new config from scratch. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix wrong pcie port number for Arcadyan WE420223-99Mikhail Zhilkin2023-03-041-1/+1
| | | | | | | | | | | | | Wrong pcie port number for WLAN causes missing 5g WLAN interface with 5.15 kernel on Arcadyan WE420223-99 (KPN Experia WiFi). This changes port from pcie0 to pcie1. [1.331556] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK) [1.345299] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [1.359116] mt7621-pci 1e140000.pcie: PCIE1 enabled Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* ramips: add support for D-Link Dir-853 A1Hang Zhou2023-03-044-0/+232
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * SoC: MT7621AT * RAM: 256MB (NT5CC64M16GP-DI) * Flash: 16MB NOR SPI flash (GD25Q127CSIG, using GD25Q128C driver) * WiFi: MT7615DN (2.4GHz+5Ghz) with DBDC * Ethernet: 4x1000M LAN, 1x 1000M WAN * LEDs: Power Blue+Orange,Wan Blue+Orange,WPS Blue,"2.4G"Blue, "5G" Blue, USB Blue * Buttons: Reset,WPS, Wifi * Serial interface: on board but not populated, pinout (from the DC jack side to the WAN port side) is "3.3V Input Output Gnd". Baud rate is 57600, settings are 8 data bits, no parity bit, one stop bit, and no flow control. Stock flash layout: ``` GD25Q128C(c8 40180000) (16384 Kbytes) mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 Creating 7 MTD partitions on "raspi": 0x000000000000-0x000001000000 : "ALL" 0x000000000000-0x000000030000 : "Bootloader" 0x000000030000-0x000000040000 : "Config" 0x000000040000-0x000000050000 : "Factory" 0x000000050000-0x000000060000 : "Config2" 0x000000060000-0x000000fb0000 : "Kernel" 0x000000fb0000-0x000001000000 : "Private" ``` The kernel partition will be replaced with the OpenWrt image, the other partitions are left untouched. "Config2" seems to be the config storage used by the stock firmware. "Private" is a 320kB empty JFFS2 partition that comes with the stock firmware. One can get a larger space for OpenWrt by merging it with "Kernel". OpenWrt flash layout: ``` 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "u-boot-env" 0x000000040000-0x000000050000 : "factory" 0x000000050000-0x000000060000 : "config2_stock" 0x000000060000-0x000000fb0000 : "firmware" 0x000000fb0000-0x000001000000 : "private_stock" ``` The OpenWrt image must have 96 bytes of padding in the header. MAC addresses on OEM firmware: | | location on the flash | notes | |------ |----------------------- |---------- | | lan (eth2) | factory + 0xe000 | on label | | wan (eth3) | factory + 0xe006 | | | 2.4g (rax0) | not on flash | lan + 1 | | 5g (ra0) | not on flash | lan + 2 | Mac addresses of the 2.4g and 5g interface are stored as ASCII strings in the u-boot-env partition, but they are not used. OpenWrt calculates Wifi Mac addresses based on the LAN Mac. Flash and test instructions: Flash the encrypted image (available in the OpenWrt forum) through the stock D-Dink web interface. 1. Open the case, and solder the 4-pin header near the WAN port. 2. Connect it to a USB-UART TTL (3.3V) adapter, no need to connect VCC. 3. Open a terminal emulator (e.g. `screen /dev/ttyUSB0` on linux) with the settings mentioned above. 4. Setup a TFTP server on your PC that can serve `xxx-ramips-mt7621-dlink_dir-853-a1-initramfs-kernel.bin`. 5. Connect any LAN port to your PC and set a static IPv4 address to 192.168.0.101 (netmask 255.255.255.0). 6. Power on the device and keeps pressing 1 until you see the prompt. 7. Use default IP addresses and enter the file name accordingly, then hit enter. 8. Wait until it boots to OpenWrt, the default IP address is 192.168.1.1, you need to change your PC network adapter to use DHCP in order to access LUCI. 9. So far, the OpenWrt runs in RAM and the flash contents are not touched. You can try OpenWrt without having to overwrite the stock firmware, a reboot clears all changes. 10. Optionally, backup the stock firmware (the "firmware" partition) in Luci. 11. To permantly install OpenWrt to the device , click on "System -> Backup/Flash Firmware" in Luci and flash `xxx-ramips-mt7621-dlink_dir-853-a1-squashfs-sysupgrade.bin` Known problems: * WLAN0 defaults to 5G after a fresh installation, to enable 2.4G network, you need to config it manually in LUCI. * If you see jffs2 related warnings/errors after updating from the stock web interface, you need to do a reset in LUCI. The error will be gone after a cold reboot. Signed-off-by: Hang Zhou <929513338qq@gmail.com>
* ipq807x: don't generate factory.ubi for Buffalo WXR-5950AX12INAGAKI Hiroshi2023-03-041-1/+2
| | | | | | | | | On WXR-5950AX12, squashfs-factory.ubi is unnecessary for OpenWrt installation and other purposes, so drop it from IMAGES and don't generate to prevent confusion of users. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* generic: MIPS: Add barriers between dcache & icache flushesDavid Bauer2023-03-042-0/+142
| | | | | | | | | | | | | | This fixes spurious boot-errors with some ath79 MIPS 74Kc boards such as the AC Lite as well as Archer C7 v2. The missing barrier leads to the icache flush being executed before the dcache writeback, which results in the CPU executing the dummy infinite loop in tlbmiss_handler_setup_pgd. Applying this patch from upstream ensures the dcache is written back before flushing the icache. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.15 to 5.15.98John Audia2023-03-045-103/+5
| | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/883-0001-net-Remove-WARN_ON_ONCE-sk-sk_forward_alloc-from-sk_.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.98&id=e7f460696340fe5caba5f21ddb262a44a2388af2 Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* mpc85xx: p2020: enable CONFIG_MAX63XX_WATCHDOGJosef Schlehofer2023-03-041-0/+1
| | | | | | | | | This enables CONFIG_MAX63XX_WATCHDOG [1], which can be used on P2020 RDB. [1] https://cateee.net/lkddb/web-lkddb/MAX63XX_WATCHDOG.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: add support for max6370 watchdog via GPIOJosef Schlehofer2023-03-042-0/+150
| | | | | | | | | | | This backports the third version [1], which is awaiting upstream merge. It adds support for watchdog max6370, which is connected via GPIO. It is useful primarily for P2020 RDB and Turris 1.x routers, which are not yet supported. [1] https://www.spinics.net/lists/linux-watchdog/msg23299.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: move CONFIG_PAGE_POOL to genericNick Hainke2023-03-043-1/+2
| | | | | | | Move "# CONFIG_PAGE_POOL is not set" to generic. Suggested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: fix regression in sw a-msdu tx introduced in mesh improvement patchesFelix Fietkau2023-03-033-21/+12
| | | | | Fixes: 6262d3eb068c ("mac80211: sync mesh fast xmit patch with upstream requested changes") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bmips: loader-lzma: drop unused RAMSIZE parameterÁlvaro Fernández Rojas2023-03-021-3/+1
| | | | | | This parameter has never been used. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: loader-lzma: drop unused RAMSIZE parameterÁlvaro Fernández Rojas2023-03-021-3/+1
| | | | | | This parameter has never been used. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* fritz-tools: fix segfault in caldata-extractDavid Bauer2023-03-022-4/+6
| | | | | | | * Fix incorrect error message in case input file opening fails * Don't close files in case the pointers are invalid Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: add mesh fast-rx supportFelix Fietkau2023-03-021-0/+77
| | | | | | | This helps bring down rx CPU usage by avoiding calls to the rx handlers in the slow path. Supports forwarding and local rx, including A-MSDU. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix mtk dsa tag paddingFelix Fietkau2023-03-023-9/+7
| | | | | | | | | The padding intended to avoid corrupted non-zero padding payload was accidentally adding too many padding bytes, tripping up some setups. Fix this by using eth_skb_pad instead. Fixes #11942. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux-firmware: add mt7986 offload firmwareFelix Fietkau2023-03-022-1/+11
| | | | | | | This is needed for WED support on MT7986. Enable it by default for the filogic subtarget. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2023-03-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | 71d84bfb343e wifi: mt76: mt76x0u: report firmware version through ethtool 99d13130b517 wifi: mt76: support ww power config in dts node 09c614734880 Revert "wifi: mt76: mt7996: rely on mt76_connac2_mac_decode_he_radiotap" e1c9c1cb50a8 mt76: mt7921: Let PCI core handle power state and use pm_sleep_ptr() 34064dbcd72a wifi: mt76: mt7921e: add pci .shutdown() support 18ccfa73a9e2 wifi: mt76: remove redundent MCU_UNI_CMD_* definitions 282845ce7f3d wifi: mt76: mt7921: fix wrong command to set STA channel 546934dacfd4 wifi: mt76: mt7921: fix PCI DMA hang after reboot fc2ed0dfc5b0 wifi: mt76: mt7996: Remove unneeded semicolon 1b602db9c235 wifi: mt76: mt7915: unlock on error in mt7915_thermal_temp_store() ce2438aa616a wifi: mt76: mt7996: fix radiotap bitfield 17ec2146b8f0 wifi: mt76: dynamic channel bandwidth changes in AP mode ab2d3650a456 wifi: mt76: mt7915: expose device tree match table 90d78253498e wifi: mt76: mt7915: add dev->hif2 support for mt7916 WED device a69c34a60451 wifi: mt76: mt7915: rework init flow in mt7915_thermal_init() 39079b5e44a7 wifi: mt76: drop the incorrect scatter and gather frame f9ca70d6367a wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 eff7666e1aa4 wifi: mt76: handle failure of vzalloc in mt7615_coredump_work 920bc6e1fc8e wifi: mt76: do not run mt76_unregister_device() on unregistered hw b0721b96927b wifi: mt76: connac: refresh tx session timer for WED device c32d6d849c43 wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add patch for allowing the driver to refresh aggregation sessionsFelix Fietkau2023-03-021-0/+60
| | | | | | Required by a mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream HE/VHT capability handling changesFelix Fietkau2023-03-022-0/+136
| | | | | | Will be required by an mt76 update at some point Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync mesh fast xmit patch with upstream requested changesFelix Fietkau2023-03-021-19/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain/binutils: switch to version 2.40 by defaultHauke Mehrtens2023-03-012-2/+2
| | | | | | | | | | | | | | | | This was build tested with all core packages on all targets successfully. This was run tested on the following systems: * lantiq/xrx200 musl * x86/64 musl * x86/64 glibc * malta/be The size of some of the initramfs images from lantiq/xrx increased by 240 bytes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: backport stable patchesHauke Mehrtens2023-03-0111-0/+2674
| | | | | | | | | | | | | | | | | | | | Add the patches with real changes from the binutils 2.40 stable branch. I am not aware that we ran into any of these problems, but I think it is better to take the existing stable patches. They were exported like this: git format-patch binutils-2_40...origin/binutils-2_40-branch I removed the patches changing the version numbers and updating the translations only. I removed the following patches: *Automatic-date-updat* 001-Re-enable-development.-Update-version-to-2.40.0.patch 004-Updated-translations-for-the-gas-and-binutils-sub-di.patch 015-Updated-Swedish-translation-for-the-binutils-sub-dir.patch 027-Updated-Swedish-translation-for-the-binutils-sub-dir.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix hwmon-gsc driverTim Harvey2023-03-014-337/+19
| | | | | | | | | Fix hwmon-gsc driver by replacing out-of-tree hwmon-gsc driver with in-tree driver that was merged in Linux v5.8: - remove the old out-of-tree module - add configuration for the in-tree modules Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* mt7621: move uboot-envtools to DEFAULT_PACKAGESBjørn Mork2023-03-012-178/+194
| | | | | | | | | Several devices depend on fw_printenv during sysupgrade. Make sure it always is present in all images, including initramfs images built by the buildbots. Fixes: 2449a632084b ("ramips: mt7621: Add support for ZyXEL NR7101") Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ramips: rt5350: enable lzma-loader for ALLNET ALL5003Sergio Paracuellos2023-03-011-0/+1
| | | | | | | Fixes the boot loader LZMA decompression issue: LZMA ERROR 1 - must RESET board to recover Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
* kexec-tools: update to 2.0.26Nick Hainke2023-03-012-55/+3
| | | | | | | | | | | | | | | Release Notes: - 2.0.22: https://www.spinics.net/lists/kexec/msg26864.html - 2.0.23: https://www.spinics.net/lists/kexec/msg27693.html - 2.0.24: https://www.spinics.net/lists/kexec/msg28922.html - 2.0.25: https://lore.kernel.org/all/YuYl22cyGldQQc5m@vergenet.net/ - 2.0.26: https://www.spinics.net/lists/kexec/msg30743.html Remove upstreamed patch: - 001-arm-do-not-copy-magic-4-bytes-of-appended-DTB-in-zIm.patch Tested-by: Linhui Liu <liulinhui36@gmail.com> # x86_64 Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: add tty led trigger kernel module packageFlorian Eckert2023-03-011-0/+17
| | | | | | | This allows LEDs to be controlled by activity on ttys which includes serial devices like '/dev/ttyS0'. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kernel: bump 5.15 to 5.15.96John Audia2023-02-2824-26/+26
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.95John Audia2023-02-2818-294/+299
| | | | | | | | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/807-v6.1-0003-nvmem-core-add-error-handling-for-dev_set_name.patch[1] bcm47xx/patches-5.15/070-net-bgmac-fix-BCM5358-support-by-setting-correct-fla.patch[2] Added fix: backport-5.15/883-0001-net-Remove-WARN_ON_ONCE-sk-sk_forward_alloc-from-sk_.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.95&id=14eea6449473c1f55e196cc104ba16d144465869 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.95&id=2603a5ca6223bb3a88814e2728335eec14f715ab 3. https://lore.kernel.org/stable/20230227211548.13923-1-kuniyu@amazon.com Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* fstools: update to the latest masterRafał Miłecki2023-02-281-3/+3
| | | | | | bfe882d libblkid-tiny: add exfat superblock support Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: fix bgmac support for BCM5358Rafał Miłecki2023-02-274-0/+244
| | | | | | | Fix two long-standing regressions. Fixes: https://github.com/openwrt/openwrt/issues/8278 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 21:01:48 +0000