aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mt76: update to the latest versionFelix Fietkau2022-03-291-3/+3
| | | | | | eed44048ca57 Revert "mt76: dma: reduce lock contention in mt76_dma_tx_cleanup" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: drop dead upgrade codeRafał Miłecki2022-03-291-8/+0
| | | | | | | platform_nand_pre_upgrade() is gone since commit 790692dde2b9 ("base-files: drop support for the platform_nand_pre_upgrade()"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: add support for Asus RT-AC88UArınç ÜNAL2022-03-292-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Asus RT-AC88U is an AC3100 router featuring 9 Ethernet ports over the integrated Broadcom and the external Realtek switch. Hardware info: * Processor: Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz * Switch: BCM53012 in BCM4709C0KFEBG & external RTL8365MB * DDR3 RAM: 512 MB * Flash: 128 MB (ESMT F59L1G81LA-25T) * 2.4GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC * 5GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC * Ports: 8 Ports, 1 WAN Ports Flashing instructions: * Boot to CFE Recovery Mode by holding the reset button while power-on. * Connect to the router with an ethernet cable. * Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0. * Head to http://192.168.1.1. * Reset NVRAM. * Upload the OpenWrt image. CFE bootloader may reject flashing the image due to image integrity check. In that case, follow the instructions below. * Rename the OpenWrt image as firmware.trx. * Run a TFTP server and make it serve the firmware.trx file. * Run the URL below on a browser or curl. http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> [rmilecki: mark BROKEN until we sort out nvram & CFE recovery] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix initramfs reproducibilityDaniel Golle2022-03-291-1/+1
| | | | | | | | | Make sure xz uses at least 2 threads so compression always runs in multi-threaded mode as the resulting file in single-threaded mode differs. Fixes: 29d7461d11 ("kernel: set options to make external initramfs reproducible") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: let mksquashfs4 use all processorsStijn Tintel2022-03-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Drop the -processors argument from the mksquashfs4 call, so it will use all available processors. This dramatically reduces the time to create squashfs filesystems. The times below are observed when building an image for my main router, the WatchGuard Firebox M300 (qoriq target): Before: real 4m45,973s After: real 0m23,497s With this commit `mksquashfs` may use more cores than defined via `-j`. This is the same behaviour as for archive creation of ImageBuilder, SDK or toolchain. There is no trivial way to limit `mksquashfs` CPU core usage to the amount of "free" make jobs since two running `mksquashfs` instances would each run with the total allowed number (-j) of threads. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> [extended reasoning in commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* realtek: Fix tc default packageHauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | The tc package does not exits any more, it was split into tc-tiny, tc-full and tc-bpf. Include tc-bpf by default into realtek images. This increases the compressed image size by about 232KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: Use firewall4Hauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | | | | | | | | | | The realtek target is not a router, but basic device, see DEVICE_TYPE. The basic device type does not come with firewall by default, see include/target.mk for details. The realtek target extended DEFAULT_PACKAGES manually with firewall. This changes the defaults to take firewall4 and nftables instead of firewall and iptables. This also adds the additional package kmod-nft-offload. The only difference to the router type is the missing ppp, ppp-mod-pppoe, dnsmasq and odhcpd-ipv6only package. This increases the compressed image size by about 422KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: Remove dnsmasq and odhcpd-ipv6only from defaultHauke Mehrtens2022-03-291-1/+1
| | | | | | | | | | | Do not include the dnsmasq and odhcpd-ipv6only package by default any more. These services are not needed on a switch. If someone needs this it is still possible to use opkg or image builder to add them. This decreases the compressed image size by about 165KBytes. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: update config for 5.15Petr Štetiar2022-03-291-6/+21
| | | | | | Refresh kernel config with `make kernel_oldconfig` make target. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: refresh kernel 5.15 patchesPetr Štetiar2022-03-291-1/+1
| | | | | | So the patches apply cleanly. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: rebase sun50i-h5-nanopi-r1s-h5.dts onto 5.15Petr Štetiar2022-03-291-8/+8
| | | | | | So the patch can be applied on top of 5.15 kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: enable 5.15 as testing kernelPetr Štetiar2022-03-291-0/+1
| | | | | | | So anyone interested can help with new kernel version integration and testing. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: copy config and patches from 5.10 to 5.15Petr Štetiar2022-03-2911-0/+874
| | | | | | | | | | | | So the upcoming changes needed for 5.15 can be reviewed easily. Removed following upstreamed patches: * 062-add-sun8i-h3-zeropi-support.patch * 100-sunxi-h3-add-support-for-nanopi-r1.patch * 101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: modules: fix kmod-mdio-devres dependency for 5.15Petr Štetiar2022-03-292-4/+4
| | | | | | | | | | | | | | | Fixes following build issues: Package kmod-r8169 is missing dependencies for the following libraries: mdio_devres.ko Package kmod-ixgbe is missing dependencies for the following libraries: mdio_devres.ko Package kmod-amd-xgbe is missing dependencies for the following libraries: mdio_devres.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: update config for 5.15Petr Štetiar2022-03-295-33/+92
| | | | | | Refresh kernel config with `make kernel_oldconfig` make target. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: enable 5.15 as testing kernelPetr Štetiar2022-03-291-0/+1
| | | | | | | So anyone interested can help with new kernel version integration and testing. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: copy config and patches from 5.10 to 5.15Petr Štetiar2022-03-297-0/+1784
| | | | | | | | | | | | | | So the upcoming changes needed for 5.15 can be reviewed easily. Removing following patches backported from 5.15: * 101-v5.15-mfd-lpc_ich-Enable-GPIO-driver-for-DH89xxCC.patch * 102-v5.15-platform-x86-add-meraki-mx100-platform-driver.patch Removed upstreamed patch `300-pcengines_apu1_led.patch` in commit 1b40faf7e4ab ("leds: apu: extend support for PC Engines APU1 with newer firmware") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* generic: backport 5.16 fix for hv utils build failurePetr Štetiar2022-03-291-0/+46
| | | | | | | | | | | | | | | | | | | | Backports following fix: hv: utils: add PTP_1588_CLOCK to Kconfig to fix build The hyperv utilities use PTP clock interfaces and should depend a a kconfig symbol such that they will be built as a loadable module or builtin so that linker errors do not happen. Prevents these build errors: ld: drivers/hv/hv_util.o: in function `hv_timesync_deinit': hv_util.c:(.text+0x37d): undefined reference to `ptp_clock_unregister' ld: drivers/hv/hv_util.o: in function `hv_timesync_init': hv_util.c:(.text+0x738): undefined reference to `ptp_clock_register' References: https://lore.kernel.org/stable/20220328093115.7486-1-ynezz@true.cz/T/#u Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: generic: add more missing kernel symbols for 5.15Petr Štetiar2022-03-291-0/+11
| | | | | | Found while adding 5.15 support for x86/sunxi targets. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* generic: 5.15: fix FIT partition parser on block partitionsDaniel Golle2022-03-291-4/+13
| | | | | | | | | Using set_disk_ro() doesn't have the desired effect and instead of just setting the single partition to be read-only it affects the whole disk. Use the bd_read_only flag in struct block_device instead to mark a partition being read-only. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* layerscape: make boot filesystem reproducibleDaniel Golle2022-03-281-1/+3
| | | | | | | Set timestamp option for make_ext4fs to make boot filesystem reproducible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: make boot filesystem reproducibleDaniel Golle2022-03-281-1/+3
| | | | | | | Set timestamp option for make_ext4fs to make boot filesystem reproducible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/gen_image_generic.sh: make ext4 bootfs reproducibleDaniel Golle2022-03-281-1/+1
| | | | | | | Set fixed timestamp for kernel other files in /boot filesystem. This should help making x86 *combined* images reproducible. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2022-03-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | 65042bfd759c mt76: mt7915: introduce 802.11ax multi-bss support e756ea3bd069 mt76: fix wrong HE data rate in sniffer tool 47b64131e820 mt76: mt7921: don't enable beacon filter when IEEE80211_CONF_CHANGE_MONITOR is set 7a05f4628e76 mt76: fix monitor rx FCS error in DFS channel 104dd5cb0a40 mt76: mt7915: fix DBDC default band selection on MT7915D a7805e4e1d58 mt76: reduce tx queue lock hold time 0b1deb9292cd mt76: dma: use kzalloc instead of devm_kzalloc for txwi 2e51013b38c9 mt76: dma: reduce lock contention in mt76_dma_tx_cleanup c96fbb86f7e5 mt76: mt7915: rework hardware/phy initialization c2bb44cab51e mt76: mt7915: accept rx frames with non-standard VHT MCS10-11 36c23a4a8422 mt76: mt7921: accept rx frames with non-standard VHT MCS10-11 5b7dd093c8f0 mt76: fix use-after-free by removing a non-RCU wcid pointer c692aacb9bde mt76: fix MBSS index condition in DBDC mode fd6541905aa4 mt76: mt7921u: add suspend/resume support 201b33cf42c2 mt76: mt7921: rely on mt76_dev rxfilter in mt7921_configure_filter 9666c08228e7 mt76: mt7921: honor pm user configuration in mt7921_sniffer_interface_iter 1442710d7936 mt76: mt7915: always call mt7915_wfsys_reset() during init ec4d9b9e8b70 mt76: mt7915: fix unbounded shift in mt7915_mcu_beacon_mbss 6b1efcd72946 mt76: mt7915: fix wfsys reset regression 376ea8152b2b mt76: mt7915: add missing chunk from wfsys reset fix Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: 5.15: fix mediatek usb module changeJohn Thomson2022-03-281-2/+4
| | | | | | | | | | The mediatek USB kernel module xhci-mtk was restructed. The module after kernel 5.13 is named xhci-mtk-hcd. Link: https://lore.kernel.org/all/0b62e21ddfacc1c2874726dd27ccab80c993f303.1615170625.git.chunfeng.yun@mediatek.com/ Linux 14295a150050 ("usb: xhci-mtk: support to build xhci-mtk-hcd.ko") Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* kernel: add missing nls dependency for kmod-fs-ntfs3Felix Fietkau2022-03-281-0/+1
| | | | | | This showed up on a linux 5.15 build Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix kernel module build errors on linux 5.15Felix Fietkau2022-03-282-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* urandom-seed: use seedrng for seeding the random number generatorJason A. Donenfeld2022-03-285-35/+442
| | | | | | | | | | | | | | | | | | | The RNG can't actually be seeded from a shell script, due to the reliance on ioctls. For this reason, the seedrng project provides a basic script meant to be copy and pasted into projects like OpenWRT and tweaked as needed: <https://git.zx2c4.com/seedrng/about/>. This commit imports it into the urandom-seed package and wires up the init scripts to call it. This also is a significant improvement over the current init script, which does not robustly handle cleaning up of seeds and syncing to prevent reuse. Additionally, the existing script creates a new seed immediately after writing an old one, which means that the amount of entropy might actually regress, due to failing to credit the old seed. Closes: https://github.com/openwrt/openwrt/issues/9570 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [fixed missing INSTALL_DIR]
* tools/zlib: bump to latest stable release 1.2.12 (CVE-2018-25032)Petr Štetiar2022-03-282-348/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | List of changes since previous release from 2018 is quite long: * Fix crc32.c to compile local functions only if used. * Check for cc masquerading as gcc or clang in configure. * Remove destructive aspects of make distclean. * Separate out address sanitizing from warnings in configure. * Eliminate use of ULL constants. * Add fallthrough comments for gcc. * Clean up minizip to reduce warnings for testing. * Fix unztell64() in minizip to work past 4GB. (Daniël Hörchner) * minizip warning fix if MAXU32 already defined. (gvollant) * Replace black/white with allow/block. (theresa-m) * Fix indentation in minizip's zip.c. * Improve portability of contrib/minizip. * Correct typo in blast.c. * Change macro name in inflate.c to avoid collision in VxWorks. * Clarify gz* function interfaces, referring to parameter names. * Fix error in comment on the polynomial representation of a byte. * Fix memory leak on error in gzlog.c. * Avoid adding empty gzip member after gzflush with Z_FINISH. * Explicitly note that the 32-bit check values are 32 bits. * Use ARM crc32 instructions if the ARM architecture has them. * Add use of the ARMv8 crc32 instructions when requested. * Correct comment in crc32.c. * Don't bother computing check value after successful inflateSync(). * Use atomic test and set, if available, for dynamic CRC tables. * Speed up software CRC-32 computation by a factor of 1.5 to 3. * Add crc32_combine_gen() and crc32_combine_op() for fast combines. * Add tables for crc32_combine(), to speed it up by a factor of 200. * Fix the zran.c example to work on a multiple-member gzip file. * Add gznorm.c example, which normalizes gzip files. * Show all the codes for the maximum tables size in enough.c. * Clarify that prefix codes are counted in enough.c. * Use inline function instead of macro for index in enough.c. * Clean up code style in enough.c, update version. * Use a macro for the printf format of big_t in enough.c. * Use a structure to make globals in enough.c evident. * Assure that the number of bits for deflatePrime() is valid. * Fix a bug that can crash deflate on some input when using Z_FIXED. * Correct the initialization requirements for deflateInit2(). * Emphasize the need to continue decompressing gzip members. * Add legal disclaimer to README. * Fix deflateEnd() to not report an error at start of raw deflate. * Remove old assembler code in which bugs have manifested. * Make the names in functions declarations identical to definitions. * Avoid an undefined behavior of memcpy() in _tr_stored_block(). * Avoid undefined behaviors of memcpy() in gz*printf(). * Avoid an undefined behavior of memcpy() in gzappend(). * Avoid the use of ptrdiff_t. * Handle case where inflateSync used when header never processed. * Don't compute check value for raw inflate if asked to validate. * Add address checking in clang to -w option of configure. * Return an error if the gzputs string length can't fit in an int. * Small speedup to inflate [psumbera]. * Update use of errno for newer Windows CE versions. * Avoid some conversion warnings in gzread.c and gzwrite.c. * Have Makefile return non-zero error code on test failure. * Avoid a conversion error in gzseek when off_t type too small. * Fix CLEAR_HASH macro to be usable as a single statement. * Fix bug when window full in deflate_stored(). * Limit hash table inserts after switch from stored deflate. * Permit a deflateParams() parameter change as soon as possible. * Cygwin does not have _wopen(), so do not create gzopen_w() there. Removed 006-fix-compressor-crash-on-certain-inputs.patch which was hotfix for CVE-2018-25032 and is now included in this release. This release is not available on @SF (yet?) so the sources are now pulled from GitHub. Fixes: CVE-2018-25032 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libs/zlib: fix implicit function declaration warningPetr Štetiar2022-03-281-3/+3
| | | | | | | | | Fixes following warning: adler32.c:141:12: warning: implicit declaration of function 'NEON_adler32' [-Wimplicit-function-declaration] 141 | return NEON_adler32(adler, buf, len); Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libs/zlib: bump to latest stable release 1.2.12 (CVE-2018-25032)Petr Štetiar2022-03-283-362/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | List of changes since previous release from 2018 is quite long: * Fix crc32.c to compile local functions only if used. * Check for cc masquerading as gcc or clang in configure. * Remove destructive aspects of make distclean. * Separate out address sanitizing from warnings in configure. * Eliminate use of ULL constants. * Add fallthrough comments for gcc. * Clean up minizip to reduce warnings for testing. * Fix unztell64() in minizip to work past 4GB. (Daniël Hörchner) * minizip warning fix if MAXU32 already defined. (gvollant) * Replace black/white with allow/block. (theresa-m) * Fix indentation in minizip's zip.c. * Improve portability of contrib/minizip. * Correct typo in blast.c. * Change macro name in inflate.c to avoid collision in VxWorks. * Clarify gz* function interfaces, referring to parameter names. * Fix error in comment on the polynomial representation of a byte. * Fix memory leak on error in gzlog.c. * Avoid adding empty gzip member after gzflush with Z_FINISH. * Explicitly note that the 32-bit check values are 32 bits. * Use ARM crc32 instructions if the ARM architecture has them. * Add use of the ARMv8 crc32 instructions when requested. * Correct comment in crc32.c. * Don't bother computing check value after successful inflateSync(). * Use atomic test and set, if available, for dynamic CRC tables. * Speed up software CRC-32 computation by a factor of 1.5 to 3. * Add crc32_combine_gen() and crc32_combine_op() for fast combines. * Add tables for crc32_combine(), to speed it up by a factor of 200. * Fix the zran.c example to work on a multiple-member gzip file. * Add gznorm.c example, which normalizes gzip files. * Show all the codes for the maximum tables size in enough.c. * Clarify that prefix codes are counted in enough.c. * Use inline function instead of macro for index in enough.c. * Clean up code style in enough.c, update version. * Use a macro for the printf format of big_t in enough.c. * Use a structure to make globals in enough.c evident. * Assure that the number of bits for deflatePrime() is valid. * Fix a bug that can crash deflate on some input when using Z_FIXED. * Correct the initialization requirements for deflateInit2(). * Emphasize the need to continue decompressing gzip members. * Add legal disclaimer to README. * Fix deflateEnd() to not report an error at start of raw deflate. * Remove old assembler code in which bugs have manifested. * Make the names in functions declarations identical to definitions. * Avoid an undefined behavior of memcpy() in _tr_stored_block(). * Avoid undefined behaviors of memcpy() in gz*printf(). * Avoid an undefined behavior of memcpy() in gzappend(). * Avoid the use of ptrdiff_t. * Handle case where inflateSync used when header never processed. * Don't compute check value for raw inflate if asked to validate. * Add address checking in clang to -w option of configure. * Return an error if the gzputs string length can't fit in an int. * Small speedup to inflate [psumbera]. * Update use of errno for newer Windows CE versions. * Avoid some conversion warnings in gzread.c and gzwrite.c. * Have Makefile return non-zero error code on test failure. * Avoid a conversion error in gzseek when off_t type too small. * Fix CLEAR_HASH macro to be usable as a single statement. * Fix bug when window full in deflate_stored(). * Limit hash table inserts after switch from stored deflate. * Permit a deflateParams() parameter change as soon as possible. * Cygwin does not have _wopen(), so do not create gzopen_w() there. Removed 006-fix-compressor-crash-on-certain-inputs.patch which was hotfix for CVE-2018-25032 and is now included in this release. This release is not available on @SF (yet?) so the sources are now pulled from GitHub. Fixes: CVE-2018-25032 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* malta: enable testing kernel 5.15Daniel Golle2022-03-281-0/+1
| | | | | | Nothing special is needed here, just add KERNEL_TESTING_PATCHVER. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: autotools: fix cache pathHuangbin Zhan2022-03-281-1/+1
| | | | | | | the cache directory should be autom4te.cache in all $(PKG_AUTOMAKE_PATHS) rather than $(PKG_BUILD_DIR)/autom4te.cache only Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* ramips: add linux 5.15 support for mt7621Felix Fietkau2022-03-2743-2/+6804
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add support for passing C preprocessor flags for DTS buildsFelix Fietkau2022-03-271-0/+1
| | | | | | | Useful for adding #ifdefs based on build system provided definitions, or for adding extra include paths Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: Backport mv88e6xxx patch to keep pvid at 0 if VLAN-unaware and ↵Marek Behún2022-03-272-18/+236
| | | | | | | | | | | | | | | remove hack Backport patch 8b6836d82470 ("net: dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware") from 5.15. Keeping the pvid at 0 when VLAN-unaware makes it possible to drop the hack introduced in commit 920eaab1d817 ("kernel: DSA roaming fix for Marvell mv88e6xxx"). Dropping the hack makes it possible to use VLAN interfaces with VID 1 on DSA ports without problems with FDB. Signed-off-by: Marek Behún <kabel@kernel.org>
* ipq806x: 5:15: fix dedicated krait cpufreqAnsuel Smith2022-03-272-29/+55
| | | | | | | | | Fix dedicated cpufreq for kernel 5.15 as they changed module order and now it can happen that cpufreq probe after cache driver. Also add lock between cache scaling in set_target as it's now required by opp functions. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: backport nand raname to kernel 5.10Ansuel Smith2022-03-271-1/+1
| | | | | | Rename nand_controller to nand in kernel 5.10 to use the same dts across kernel version. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: rework rootfs conflicts patch for smemAnsuel Smith2022-03-271-15/+16
| | | | | | | | | | Now that smem actually free the leaked parts, when a rootfs partition is detected, the kernel panics as it try to free the static space allocated for the "ubi" name. Change the logic and fix the name at the allocate_partition function to correctly free the space allocated by smem. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: 5:15: add testing kernel versionAnsuel Smith2022-03-2728-722/+274
| | | | | | | | | Refresh patch for 5.15 Rework tweak patch to sync with upstream ipq8064 dtsi and fix regression introduced. Rename nand_controller to nand in every dts. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: 5:15: drop upstream patchAnsuel Smith2022-03-2714-2244/+0
| | | | | | | | | - Drop stmmac upstream patches - Drop tsens patches - Drop ADM driver - Drop SMEM parser Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: 5:15: refresh configAnsuel Smith2022-03-271-15/+16
| | | | | | Refreshed using make kernel_menuconfig CONFIG_TARGET=generic Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: 5:15: copy config and patch from 5.10Ansuel Smith2022-03-2744-0/+6995
| | | | | | Copy config and patch from kernel 5.10 to kernel 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: sort generic configurationAleksander Jan Bajkowski2022-03-272-31/+28
| | | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.10 /dev/null > target/linux/generic/config-5.10-new $ mv target/linux/generic/config-5.10-new target/linux/generic/config-5.10 $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new $ mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add more missing config symbols for 5.15Aleksander Jan Bajkowski2022-03-271-0/+8
| | | | | | | Add more disabled config options found in malta target to generic. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* mediatek: add 5.15 config for mt7623 and mt7629Daniel Golle2022-03-272-0/+934
| | | | | | | Compile tested both with all kernel modules. Run-time tested mt7623 on BananaPi-R2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: 5.15: add missing Kconfig symbols for NFSDaniel Golle2022-03-271-2/+9
| | | | | | | Add new Kconfig symbols for NFSv4.1 and NFSv4.2 to kmod-nfs-common and kmod-nfsd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: 5.15: add more missing symbolsDaniel Golle2022-03-271-0/+46
| | | | | | | Add various Kconfig symbols which surfaced when building with all kernel modules enabled. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: stop chromium sub-target builds on the buildbotsChristian Lamparter2022-03-271-1/+1
| | | | | | | | | | | | | | | | | the buildbots are having troubles with the image. They seem to get "Killed" at the last step of the KERNEL rule: |/cros-vbutil -k zImage.itb.vboot -c "root=PARTUUID=%U/PARTNROFF=1" -o zImage.itb.vboot.new |make[4]: *** [Makefile:18: zImage.itb.vboot] Killed Since the Google Wifi (Gale) is currently the only target in this sub-target. So this means that subtarget has to be disabled from the time being to not be picked up by the builders. For people wanting to checkout out OpenWrt on the Google Wifi: please compile it locally. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gpio-cdev: move kmod-leds-uleds dependency to MX100Christian Lamparter2022-03-272-3/+3
| | | | | | | | | | | | | The inclusion of the kmod-leds-uleds into the userspace nu801 package causes a circular dependency inside the buildsystem... which causes it to be picked regardless of other DEPENDS values. In case of the mx100, this could be solved by moving the kmod-leds-uled dependency to the kmod-meraki-mx100. Bonus: drop @!LINUX_5_4 from kmod-meraki-mx100 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 04:53:55 +0000