aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* umdns: re-enable address-of-packed-member warningKevin Darbyshire-Bryant2020-05-101-1/+1
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: hotplug script tidyupKevin Darbyshire-Bryant2020-05-102-6/+3
| | | | | | | | Hotplug scripts are sourced so the #!/bin/sh is superfluous/deceptive. Re-arrange script to only source 'procd' if we get to the stage of needing to signal the process, reduce hotplug processing load a little. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* bcm27xx: label to boot partitionAndrey Kunitsyn2020-05-101-1/+1
| | | | | | | Get fat partition name allow easy partition identification for user. Signed-off-by: Andrey Kunitsyn <blackicebox@gmail.com>
* ramips: add support for LB-Link BL-W1200Pawel Dembicki2020-05-094-0/+189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BL-W1200 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7612E) - 5x 10/100/1000 Mbps Ethernet (MT7530) - 2x external, non-detachable antennas (Wifi 2.4G/5G) - 1x USB 2.0 - UART (R2) on PCB (57600 8n1) - 9x LED (1 GPIO controlled), 1x button - u-Boot bootloader Known issues: - No status LED. Used WPS LED during boot/failsafe/sysupgrade. Installation: 1. Apply initramfs image via factory web-gui. 2. Install sysupgrade image. How to revert to OEM firmware: - sysupgrade -n -F stock_firmware.bin Reviewed-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mac80211: distance config: allow "auto" as a valueAli MJ Al-Nasrawy2020-05-091-1/+2
| | | | | | | | | The user can now enable the ACK timeout estimation algorithm (dynack) for drivers that support it. It is also expected that the distance config accepts the same values as: $ iw phyX set distance XXX Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
* ramips: dts: fix incorrect flash reg propertySungbo Eo2020-05-095-5/+5
| | | | | | | | Most work was done in commit 021c8936584d ("ramips: fix size-cells on spi nodes"), but a few more DTS files using the old reg style have been added since then. This commit fixes them. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: dts: use generic node name for flashSungbo Eo2020-05-09239-240/+240
| | | | | | | | | | | | | | | | | In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. While at it, remove unused m25p80 label. Tested on rt5350 (for spi-nor) and rt3662 (for cfi-flash). 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: uDPU: switch default kernel and U-Boot PHY modeJakov Petrina2020-05-093-0/+83
| | | | | | | | | | | | | | | | Certain SFP modules (most notably Nokia GPON ones) first check connectivity on 1000base-x, and switch to 2500base-x afterwards. This is considered a quirk so the phylink switches the interface to 2500base-x as well. However, after power-cycling the uDPU device, network interface/SFP module will not work correctly until the module is re-seated. This patch resolves this issue by forcing the interface to be brought up in 2500base-x mode by default. Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
* base-files: upgrade: fix indentJavier Marcet2020-05-081-2/+2
| | | | | | | | Use same indent as for the rest of the file. Signed-off-by: Javier Marcet <javier@marcet.info> [add commit description] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: dts: add missing 'serial0' alias for TP-Link TL-MR3040v2Lech Perczak2020-05-081-0/+1
| | | | | | | | Out of all devices currently supported based on AR9331 chipset, this one had the 'serial0' alias missing. Add it to fix setting of /dev/console and login shell on the onboard UART. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ramips: tidy up image subtarget MakefilesSungbo Eo2020-05-086-110/+85
| | | | | | | | | - use tab indent in image build recipes for consistency - harmonize line wrapping Signed-off-by: Sungbo Eo <mans0n@gorani.run> [use different line wrapping for one recipe] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: tidy up image MakefileSungbo Eo2020-05-081-109/+87
| | | | | | | - sort recipes alphabetically - simplify subtarget include directives Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: simplify palmbus/{i2c,spi} in device DTS filesSungbo Eo2020-05-087-89/+76
| | | | | | | | | As the node is already defined and labeled in SoC DTSI file, we can refer to it outside of root node and reduce redundancy. While at it, remove unused pcf8563 label. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: use hex notation for *-mtd-eeprom propertySungbo Eo2020-05-08160-160/+160
| | | | | | | Change "0" to "0x0" for consistency. This is an extension of commit 34abfb6e91d1 ("ramips: convert mediatek,mtd-eeprom from decimal to hex notation"). Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* generic: fix patching error on kernel 5.4Koen Vandeputte2020-05-081-9/+11
| | | | | | | | | | | | | | | | | | Fixes a build error seen when applying the kernel patches. Applying patch generic/435-mtd-add-routerbootpart-parser-config.patch patching file drivers/mtd/parsers/Kconfig Hunk #1 FAILED at 160. 1 out of 1 hunk FAILED -- rejects in file drivers/mtd/parsers/Kconfig patching file drivers/mtd/parsers/Makefile Hunk #1 FAILED at 10. 1 out of 1 hunk FAILED -- rejects in file drivers/mtd/parsers/Makefile This was missed as 5.4 is currently set as testing kernel while the main kernel being used is 4.19 Fixes: 2976e423dc6e ("generic: routerboot partition build bits") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips/mt7621: mikrotik: don't use mtd-mac-address in DTSThibaut VARÈNE2020-05-084-25/+4
| | | | | | | | | | | | | As evidenced here[1] the device MAC address can be stored at a random offset in the hard_config partition. Rely on sysfs to update the MAC address correctly. Adjust config so that WAN is base MAC and LAN is base MAC +1 to better match label and vendor OS. [1] https://github.com/openwrt/openwrt/pull/2850#issuecomment-610809021 Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ath79/mikrotik: load caldata via sysfs loaderThibaut VARÈNE2020-05-082-4/+6
| | | | | | | | | | | | | This commit takes advantages of base-files 220 which introduces routines to perform caldata loading directly via the kernel sysfs loader helper. This has the benefits of not wasting flash space to store caldata. Memory footprint is reduced to the bare minimum: for devices that don't need MAC patching, the caldata is loaded directly, for devices that do need MAC patching, the caldata is extracted to /tmp, patched and then loaded. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* package/base-files: add caldata_sysfsload_from_file()Thibaut VARÈNE2020-05-082-1/+16
| | | | | | | | This routine enables loading caldata binary via the kernel sysfs loader See https://www.kernel.org/doc/html/v4.19/driver-api/firmware/fallback-mechanisms.html Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* package/base-files: caldata: allow setting target fileThibaut VARÈNE2020-05-082-9/+22
| | | | | | | This will enable platforms to extract caldata to an arbitrary file, or patch mac in an abitrary file. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ar71xx/mikrotik: ath10k: use new sysfs driverThibaut VARÈNE2020-05-081-2/+2
| | | | | | Fetch ath10k calibration data from new mikrotik sysfs driver Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* package/utils: remove rbextractThibaut VARÈNE2020-05-086-895/+0
| | | | | | | | | | | | Rationale: 1/ This tool is no longer necessary following the implementation of a sysfs driver 2/ The upstream author, Robert Marko, stated[1] that this tool had been taken from his tree in an unfinished state not suitable for merging [1] https://github.com/openwrt/openwrt/pull/2850#issuecomment-610277863 Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ath79/mikrotik: use standard caldata functionsThibaut VARÈNE2020-05-084-33/+10
| | | | | | | With the implementation of a sysfs interface to access WLAN data, this target no longer needs a special wrapper to extract caldata. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ath79/mikrotik: don't use mtd-mac-address in DTSThibaut VARÈNE2020-05-083-5/+9
| | | | | | | | | | | | | | | | | | As evidenced here[1] the device MAC address can be stored at a random offset in the hard_config partition. Rely on sysfs to update the MAC address correctly. To match sticker and vendor OS behavior, WAN MAC is set to the device base MAC and LAN MAC is incremented from that. Note: this will trigger a harmless kernel message during boot: ag71xx 19000000.eth: invalid MAC address, using random address There is no clean workaround to prevent this message from being emitted. [1] https://github.com/openwrt/openwrt/pull/2850#issuecomment-610809021 Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: platform/mikrotik: support LZOR encodingThibaut VARÈNE2020-05-081-1/+261
| | | | | | | | Some newer MikroTik RouterBOARD devices use a new encoding scheme for their WLAN calibration data. This patch provides support for decoding this new scheme. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ramips/mt7621: enable mikrotik platform driverThibaut VARÈNE2020-05-081-0/+2
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ar71xx/mikrotik: enable mikrotik platform driverThibaut VARÈNE2020-05-081-0/+2
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ath79/mikrotik: enable mikrotik platform driverThibaut VARÈNE2020-05-081-0/+2
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: mikrotik platform build bitsThibaut VARÈNE2020-05-086-0/+110
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: routerboot sysfs platform driverThibaut VARÈNE2020-05-085-0/+717
| | | | | | | | | | | | | | | | | | | | | | | | | This driver exposes the data encoded in the "hard_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "hard_config". The WLAN calibration data is available on demand via the 'wlan_data' sysfs file in that folder. This driver permanently allocates a chunk of RAM as large as the "hard_config" MTD partition (typically 4KB), although it is technically possible to operate entirely from the MTD device without using a local buffer (except when requesting WLAN calibration data), at the cost of a performance penalty. This driver does not reuse any of the existing code previously found in routerboot.c. This driver has been successfully tested on BE (ath79) and LE (ipq40xx and ramips) hardware. Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Tested-by: Baptiste Jonglez <git@bitsofnetworks.org> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Christopher Hill <ch6574@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ramips: mikrotik: use routerbootpart partitionsThibaut VARÈNE2020-05-083-24/+12
| | | | | | | Enable routerbootpart partitions on MikroTik devices. Tested-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ramips/mt7621: enable CONFIG_MTD_ROUTERBOOT_PARTSThibaut VARÈNE2020-05-081-0/+1
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ath79/mikrotik: use routerbootpart partitionsThibaut VARÈNE2020-05-082-23/+12
| | | | | | | Enable routerbootpart partitions on MikroTik devices. Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ath79/mikrotik: enable CONFIG_MTD_ROUTERBOOT_PARTSThibaut VARÈNE2020-05-081-0/+1
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: routerboot partition build bitsThibaut VARÈNE2020-05-086-0/+125
| | | | Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* generic: routerbootpart MTD parser for RouterBootThibaut VARÈNE2020-05-081-0/+365
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver provides an OF MTD parser to properly assign the RouterBoot partitions on the flash. This parser builds from the "fixed-partitions" one (see ofpart.c), but it can handle dynamic partitions as found on routerboot devices. The parent node must contain the following: compatible = "mikrotik,routerboot-partitions"; #address-cells = <1>; #size-cells = <1>; Children routerbootpart DTS nodes are defined as follows: For fixed partitions node-name@unit-address { reg = <prop-encoded-array>; label = <string>; read-only; lock; }; All properties but reg are optional. For dynamic partitions: node-name { size = <prop-encoded-array>; label = <string>; read-only; lock; }; size property is mandatory unless the next partition is a fixed one or a "well-known" one (matched from the strings defined below) in which case it can be omitted or set to 0; other properties are optional. By default dynamic partitions are appended after the preceding one, except for "well-known" ones which are automatically located on flash. Well-known partitions (matched via label or node-name): - "hard_config" - "soft_config" - "dtb_config" This parser requires the DTS to list partitions in ascending order as expected on the MTD device. This parser has been successfully tested on BE (ath79) and LE (ipq40xx and ramips) hardware. Tested-by: Baptiste Jonglez <git@bitsofnetworks.org> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Christopher Hill <ch6574@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* kernel: add missing symbol to 5.4 configStijn Tintel2020-05-081-0/+1
| | | | | | This symbol is exposed if KERNEL_PROVE_LOCKING is enabled. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lldpd: add management IP settingDaniel A. Maierhofer2020-05-083-2/+10
| | | | | | | | | | | | | add option to set management IP pattern also add missing 'unconfigure system hostname' for example pattern '!192.168.1.1' makes it possible that WAN IP is selected instead of LAN IP Signed-off-by: Daniel A. Maierhofer <git@damadmai.at> [grammar and spelling fixes in commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* samba36: RemoveRosen Penev2020-05-0842-32013/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Samba 3.6 is completely unsupported, in addition to having tons of patches It also causes kernel panics on some platforms when sendfile is enabled. Example: https://github.com/gnubee-git/GnuBee_Docs/issues/45 I have reproduced on ramips as well as mvebu in the past. Samba 4 is an alternative available in the packages repo. cifsd is a lightweight alternative available in the packages repo. It is also a faster alternative to both Samba versions (lower CPU usage). It was renamed to ksmbd. To summarize, here are the alternatives: - ksmbd + luci-app-cifsd - samba4 + luci-app-samba4 Signed-off-by: Rosen Penev <rosenp@gmail.com> [drop samba36-server from GEMINI_NAS_PACKAGES, ksmbd rename + summary] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* opkg: update to latest Git HEADJo-Philipp Wich2020-05-071-3/+3
| | | | | | | | | | | f2166a8 libopkg: implement lightweight package listing logic cf4554d libopkg: support passing callbacks to feed parsing functions 2a0210f opkg-cl: don't read feeds on opkg update b6f1967 libopkg: use xsystem() to spawn opkg-key 60b9af2 file_util.c: refactor and fix checksum_hex2bin() 206ebae file_util.c: fix possible bad memory access in file_read_line_alloc() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* layerscape: update restool to LSDK-20.04Yangbo Lu2020-05-071-3/+3
| | | | | | Update restool to latest LSDK-20.04. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-dpl to LSDK-20.04Yangbo Lu2020-05-071-3/+3
| | | | | | Update ls-dpl to latest LSDK-20.04. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for ls-dplYangbo Lu2020-05-072-27/+15
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain ls-dpl with only one package installing all 4 files as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-mc to LSDK-20.04Yangbo Lu2020-05-071-5/+5
| | | | | | Update ls-mc to latest LSDK-20.04. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for ls-mcYangbo Lu2020-05-072-23/+11
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain ls-mc with only one package installing all two images as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ppfe-firmware to LSDK-20.04Yangbo Lu2020-05-071-3/+3
| | | | | | Update ppfe-firmware to latest LSDK-20.04. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update fman-ucode to LSDK-20.04Yangbo Lu2020-05-071-2/+2
| | | | | | | Just update PKG_VERSION/PKG_MIRROR_HASH since fman-ucode of LSDK-20.04 had no changes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for fman-ucodeYangbo Lu2020-05-072-25/+13
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain fman-ucode with only one package installing all two binaries as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update tfa to LSDK-20.04Yangbo Lu2020-05-072-70/+36
| | | | | | | | | | | | Update tfa package to latest LSDK-20.04 dropping one patch which had already been integrated. Add fixes, - Fix DEPENDS/PKG_BUILD_DEPENDS. - Remove HIDDEN:=1. - Move intermediate files installing into Build/InstallDev. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK-20.04Yangbo Lu2020-05-0710-97/+9
| | | | | | | | Update u-boot package to latest LSDK-20.04 dropping patches which are no longer needed. Adapt u-boot bootargs to kernel 5.4 for booting. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-rcw to latest LSDK-20.04Yangbo Lu2020-05-074-551/+38
| | | | | | | | Update ls-rcw to latest LSDK-20.04. Update patch 0001 with a new one. Drop patch 0002 since it had been integrated. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 06:39:04 +0000