aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* owipcalc: use v6 in cidr_parse6 functionNick Hainke2021-01-152-5/+5
| | | | | | | | | | | The cidr_parse6 function parses a string to an ipv6-address. The cidr struct contains a union called buf for the ipv4 and ipv6 address. Since it is a char pointer and the struct is initialized with the maximum size (so ipv6 string) it does not make any difference. However, we should access the buffer using the v6 name, since it could be confusing otherwise. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq806x: fix Ubiquiti UniFi AC HD partition mapJan Alexander2021-01-151-1/+1
| | | | | | | | | | This fixes a typo in the previously committed partition map that led to the extension of the read-only mtd partition "SSD" into the following partitions. Fixes: 4e46beb31342 ("ipq806x: add support for Ubiquiti UniFi AC HD") Signed-off-by: Jan Alexander <jan@nalx.net>
* kernel: bump 5.4 to 5.4.89John Audia2021-01-159-14/+14
| | | | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
* mac80211: fix rounding error in minstrel_ht throughput calculationFelix Fietkau2021-01-151-0/+34
| | | | | | Fixes rate selection with lower data rates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts: target-metadata don't add PROFILES twicePaul Spooren2021-01-141-1/+2
| | | | | | | | | | | | | | | Since 4ee3cf2b5a profiles with alternative vendor names may appear multiple times in `tmp/.targetinfo` or `.targetinfo` (for ImageBuilders). The `target-metadata.pl` script adds these profiles then twice to `PROFILE_NAMES` and the ImageBuilder show the profile twice when running `make info`. This patch removes duplicate profile IDs and only adds them once to `.profiles.mk`. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: make lwtunnel support optionalRui Salvaterra2021-01-141-2/+3
| | | | | | | | | | Not everyone will want to bloat their kernel by 24 kiB for such a niche feature. Fixes: a1a7f3274e0ed27511d45f62ee20281d8d57c7af "kernel: enable SRv6 support by enabling lwtunnel" Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm4908: prepend kernel images with a custom headerRafał Miłecki2021-01-151-2/+7
| | | | | | It's required for CFE to accept kernel. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: bcm4908kernel: tool adding BCM4908 kernel headerRafał Miłecki2021-01-152-0/+128
| | | | | | | BCM4908 CFE bootloader requires kernel to be prepended with a custom header. This simple tool implements support for such headers. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* glibc: add arc700 patchRosen Penev2021-01-144-58/+87
| | | | | | | | | glibc does not officially support ARC700 so this adds the missing pieces. I looked at uClibc-ng and a patch by Synopsis for glibc. ran make toolchain/glibc/refresh to clean up fuzz. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mac80211: fix an uninitialized stack variable in the minstrel updateFelix Fietkau2021-01-142-3/+11
| | | | | | It can lead to out-of-bounds access and invalid rates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-01-142-28/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a46f9a9160e9 mt76: mt7915: add vif check in mt7915_update_vif_beacon() 27ad12352ac9 mt76: mt7615: add vif check in mt7615_update_vif_beacon() 0a449cef024e mt76: mt7915: fix MT_CIPHER_BIP_CMAC_128 setkey eacd2d493c61 mt76: mt7915: reset token when mac_reset happens e4b23301e6c9 mt76: mt7615: reset token when mac_reset happens 6e22bbfe0360 mt76: mt7615: convert comma to semicolon 37865118ae2d mt76: mt7915: convert comma to semicolon 742c36b2e527 mt76: mt7915: run mt7915_configure_filter holding mt76 mutex a515727e8423 mt76: mt7915: add support for flash mode b6f7b3da5216 mt76: mt7915: fix endianness warning in mt7915_mcu_set_radar_th 062f3f4f06a2 mt76: mt7915: simplify mt7915_mcu_send_message routine dbba9b993300 mt76: mt7915: drop zero-length packet to avoid Tx hang 36a745d0f71c mt76: Fix queue ID variable types after mcu queue split a4539760b0b1 mt7915: update the testmode support to the latest upstream patch 64bd6f87e4c2 mt7915: fix crash on failure in pci_set_dma_mask c202ace409e0 mt76: remove unused variable q d1b827781f84 mt76: mt7915: add partial add_bss_info command on testmode init a897a69769f5 mt76: testmode: introduce dbdc support b44472e99822 mt76: testmode: move mtd part to mt76_dev 45e27e6cdc12 mt76: mt7915: move testmode data from dev to phy b6673b005770 mt76: mt7615: move testmode data from dev to phy abdd471e9f2d mt76: mt7915: fix ht mcs in mt7915_mcu_get_rx_rate() d679b56b9585 mt76: move mac_work in mt76_core module 36cd48ab4454 mt76: move chainmask in mt76_phy 89a6781ed045 mt76: mt7915: force ldpc for bw larger than 20MHz in testmode 3d0834e78005 mt76: testmode: add support to set user-defined spe index cc05f4679667 mt76: testmode: add attributes for ipg related parameters 77b18b16fe16 mt76: testmode: make tx queued limit adjustable 6365a58573cb mt76: mt7915: split edca update function e56282bf67f6 mt76: mt7915: add support for ipg in testmode 6fa642903e4e mt76: mt7915: calculate new packet length when tx_time is set in testmode 729ec5daeba5 mt76: mt7915: clean hw queue before starting new testmode tx 981443da5cf7 mt76: testmode: add a new state for continuous tx 4793fc9b3d48 mt76: mt7915: rework set state part in testmode 11a1e86e5946 mt76: mt7915: add support for continuous tx in testmode 364affef82fc mt76: mt7615: mt7915: disable txpower sku when testmode enabled 9fc19db51293 mt76: mt7915: simplify peer's TxBF capability check 6377b7f330be mt76: mt7915: add implicit Tx beamforming support 983091a40633 mt76: mt7915: fix MESH ifdef block bbb7a9e77751 mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker a28a8dd2f7de mt76: usb: fix crash on device removal 9c312f2ce2c5 mt76: mt7915: rework mcu API e6fe82acb111 mt76: mt7915: disable RED support in the WA firmware 25d7429bdc41 mt76: mt7915: fix eeprom parsing for DBDC 7a93026dd3dc mt76: mt7915: fix eeprom DBDC band selection 4c8a09cc45d0 tools: Set mode for new file /tmp/mt76-test-%s Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/fakeroot: fix build regression on macOSFelix Fietkau2021-01-141-2/+18
| | | | | | AT_EMPTY_PATH and AT_NO_AUTOMOUNT does not exist there Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm4908: backport brcmstb USB PHY driver changesRafał Miłecki2021-01-1424-0/+3746
| | | | | | This includes BCM4908 support Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: fix key_mgmt typoLeon M. George2021-01-142-2/+2
| | | | | | | | | | | The key_mgmt variable was mistyped when checking against "WPS", so the if clause was never entered. Fixes: f5753aae233f ("hostapd: add support for WPS pushbutton station") Signed-off-by: Leon M. George <leon@georgemail.eu> [add commit message, bump PKG_RELEASE] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* hostapd: remove trailing whitespacesLeon M. George2021-01-141-2/+2
| | | | Signed-off-by: Leon M. George <leon@georgemail.eu>
* hostapd: remove unused variableLeon M. George2021-01-141-1/+0
| | | | | | | | | 'base' was never used. Fixes: 498d84fc4e00 ("netifd: add wireless configuration support and port mac80211 to the new framework") Signed-off-by: Leon M. George <leon@georgemail.eu>
* hostapd: remove unused variableLeon M. George2021-01-141-1/+0
| | | | | | | | | 'enc_str' was never used. Fixes: 498d84fc4e00 ("netifd: add wireless configuration support and port mac80211 to the new framework") Signed-off-by: Leon M. George <leon@georgemail.eu>
* hostapd: run as user 'network' if procd-ujail is installedDaniel Golle2021-01-144-2/+55
| | | | | | | Granting capabilities CAP_NET_ADMIN and CAP_NET_RAW allows running hostapd and wpa_supplicant without root priviledges. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: improve error handling when adding hostapd configDaniel Golle2021-01-142-8/+8
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: improve error handling when adding supplicant configDaniel Golle2021-01-142-5/+5
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add multicast_to_unicast and per_sta_vifEtan Kissling2021-01-142-2/+15
| | | | | | | | This allows configuration of multicast_to_unicast and per_sta_vif options. - multicast_to_unicast requests multicast-to-unicast conversion. - per_sta_vif assigns each station its own AP_VLAN interface. Signed-off-by: Etan Kissling <etan_kissling@apple.com>
* mbedtls: add config option to compile with hkdfEtan Kissling2021-01-141-1/+18
| | | | | | | This adds a config option to allow compiling with HKDF algorithm support to support applications that require this feature. Signed-off-by: Etan Kissling <etan_kissling@apple.com>
* nf-conntrack: allow querying conntrack info in nfqueueEtan Kissling2021-01-142-1/+2
| | | | | | | | | | | This allows libnetfilter_queue to access connection tracking information by requesting NFQA_CFG_F_CONNTRACK. Connection tracking information is provided in the NFQA_CT attribute. CONFIG_NETFILTER_NETLINK_GLUE_CT enables the interaction between nf_queue and nf_conntrack_netlink. Without this option, trying to access connection tracking information results in "Operation not supported". Signed-off-by: Etan Kissling <etan_kissling@apple.com>
* kernel: drop unneeded kernel version dependencyAndy Walsh2021-01-141-1/+0
| | | | | | | | | | | The current master only supports kernel 5.4, and there is no reason to remove KERNEL_IO_URING for future kernels. Drop the unneeded dependency. Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* zstd: fix package sourceDavid Bauer2021-01-141-1/+2
| | | | | | | | | | It looks like GitHub changed the URL path for release tarballs, thus the download for the zstd package was always falling back to the OpenWrt sources mirror. Fix the GitHub URL for one which works. The file hash remains unchanged. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-envtools: add support for Aruba AP-303 and AP-365Jan Alexander2021-01-144-4/+8
| | | | | | | | | Both devices use u-boot env variables to boot OpenWrt from its flash partition. Using u-boot envtools, it is possible to change the bootcmd back to the stock firmware partition directly from OpenWrt without attaching a serial cable or even physically accessing the device. Signed-off-by: Jan Alexander <jan@nalx.net>
* ipq806x: add support for Ubiquiti UniFi AC HDJan Alexander2021-01-146-1/+326
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ8064 RAM: 512MB DDR3 Flash: 256MB NAND (Micron MT29F2G08ABBEAH4) 32MB SPI-NOR (Macronix MX25U25635F) WLAN: Qualcomm Atheros QCA9994 4T4R b/g/n Qualcomm Atheros QCA9994 4T4R a/n/ac ETH: eth0 - SECONDARY (Atheros AR8033) eth1 - MAIN (Atheros AR8033) USB: USB-C LED: Dome (white / blue) BTN: Reset Installation ------------ Copy the OpenWrt sysupgrade image to the /tmp directory of the device using scp. Default IP address is 192.168.1.20 and default username and password are "ubnt". SSH to the device and write the bootselect flag to ensure it is booting from the mtd partition the OpenWrt image will be written to. Verify the output device below matches mtd partition "bootselect" using /proc/mtd. > dd if=/dev/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11 Write the OpenWrt sysupgrade image to the mtd partition labeled "kernel0". Also verify the used partition device using /proc/mtd. > dd if=/tmp/sysupgrade.bin of=/dev/mtdblock12 Reboot the device. Back to stock ------------- Use the TFTP recovery procedure with the Ubiquiti firmware image to restore the vendor firmware. Signed-off-by: Jan Alexander <jan@nalx.net>
* uboot-rockchip: update NanoPi R2S patchesDavid Bauer2021-01-143-129/+178
| | | | | | | Update the NanoPi R2S to the latest version submitted upstream. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-rockchip: update to v2021.01Marty Jones2021-01-145-111/+127
| | | | | | | | | | | | Update the U-Boot to version v2021.01. Run-tested: FriendlyARM NanoPi R2S Radxa Rock Pi 4 Pine64 RockPro64 Signed-off-by: Marty Jones <mj8263788@gmail.com> [format commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* iw: enable HE PHY information for iw-tinyDavid Bauer2021-01-142-28/+12
| | | | | | | | | | Currently PHY information obtained from "iw phy" lacks information about a PHYs HE capabilities when using the by default installed iw-tiny. As there are already 802.11ax supported devices, enabled printing this information for the by-default installed iw variant. Signed-off-by: David Bauer <mail@david-bauer.net>
* bcm4908: backport BCM4908 integrated switch initial supportRafał Miłecki2021-01-134-0/+225
| | | | | | | Upstream driver supports bridging ports. There is no support for crossbar setup or CPU port(s) yet. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport PMB (Power Management Bus) driverRafał Miłecki2021-01-133-0/+502
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: add simple PCIe reset controller supportRafał Miłecki2021-01-121-0/+40
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport upstream DTS patchesRafał Miłecki2021-01-129-0/+501
| | | | | | | | | | 1. Netgear R8000P DTS file 2. NAND fix 3. PCIe reset block 4. Integrated switch 5. PMB block Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: initial work on the Broadcom BCM4908 targetRafał Miłecki2021-01-127-0/+623
| | | | | | | | | | | | | | | | | | | | | BCM4906, BCM4908 and BCM49408 are SoCs with 64 bit ARMv8 B53 CPUs. Upstream Linux is slowly getting support for that SoCs family so it makes sense to add target for it. This prepares initial support for: 1. Asus GT-AC5300 BCM4908 based device (4 CPUs) with 1024 MiB RAM, NAND, 8 LAN ports. 2. Netgear R8000P BCM4906 based device (2 CPUs) with 512 MiB RAM, NAND, 4 LAN ports. Flashing info will come later as we learn how to generate proper images. It isn't usable yet (it only produces a bootable kernel) so "source-only" is used. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: enable SRv6 support by enabling lwtunnelNick Hainke2021-01-112-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | Enable the ability to use segment routing based on IPv6. It allows the packet to specify a path that the packet should take through the network. Lwtunnel allow an easy encapsulation of a package. You can just install ip-full package and use it: ip -6 route add 2003::/64 dev eth0 encap seg6 mode encap \ segs 2001::1,2002::2 An IPv6 package looks like this: [IPv6 HDR][IPv6 RH][IPv6 HDR][Data...] Netifd support: https://git.openwrt.org/?p=project/netifd.git; a=commit;h=458b1a7e9473c150a40cae5d8be174f4bb03bd39 Increases imagesize by 24.125 KiB. Therefore, only enable for devices with enough flash. Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/ccache: find libzstd using rpathThomas Nixon2021-01-101-1/+4
| | | | | | | Previously, ccache would end up using the system libzstd, which is not supposed to be a build requirement. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* rockchip: add missing Kconfig symbolsDavid Bauer2021-01-111-0/+5
| | | | | | | | When compiling with CONFIG_ALL_KMODS enabled, compilation might stall due to unset rockchip-specific config symbols. Disable these to avoid stalling this step. Signed-off-by: David Bauer <mail@david-bauer.net>
* qemu: remove obsolete packagePaul Spooren2021-01-1014-2387/+0
| | | | | | | Instead of using an ancient qemu version in-tree the building machine should just have qemu-utils installed. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build/image: warn if missing qemu-img for VDI/VMDKPaul Spooren2021-01-101-2/+6
| | | | | | | | | | | | | | | Currently `qemu-img` is used to convert raw x86 images to VDI and VMDK images, used for virtual machines. Having `qemu-img` in tree requires us to maintain an ancient version of `qemu-utils`, which recently required extra work to compile with newer compiler version. This commit prints a warning message in case `qemu-img` is missing. As a next step the in-tree version of `qemu-img` can be removed. Signed-off-by: Paul Spooren <mail@aparcar.org>
* mac80211: use hostapd PID returned from config_addDaniel Golle2021-01-102-3/+2
| | | | | | | Use PID returned from config_add instead of querying procd when adding configuration to hostapd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: return PID on config_add callDaniel Golle2021-01-104-4/+11
| | | | | | | | | To simplify the way netifd acquires the PIDs of wpa_supplicant and hostapd let the config_add method of both of them return the PID of the called process. Use the returned PID instead of querying procd when adding wpa_supplicant configuration. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* glibc: update to latest 2.32 commit (BZ #24973)Hans Dedecker2021-01-101-2/+2
| | | | | | 0d9793e82a Fix buffer overrun in EUC-KR conversion module (bz #24973) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel-defaults: Manage the enabling/disabling of ZSTDFlorian Fainelli2021-01-091-0/+1
| | | | | | | | Linux 5.9 introduces support for ZSTD ramdisk and initrd compression, make sure we enable/disable the relevant options when building an initramfs enabled kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel-defaults: Delete external source tree user_headersFlorian Fainelli2021-01-091-0/+1
| | | | | | | | | | When we use an external kernel tree which may not have been fully cleaned, there may be user_headers left which do not match the target architecture, leading to build failures for packages that do an explicit inclusion of user_headers (such as iproute2 or iptables). Make sure we delete them while preparing the directory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* iptables: update to 1.8.6Curtis Deptuck2021-01-097-39/+32
| | | | | | | | | | | | | Update iptables to 1.8.6 ChangeLog: https://netfilter.org/projects/iptables/files/changes-iptables-1.8.6.txt Refresh patch: 101-remove-check-already.patch Signed-off-by: Curtis Deptuck <curtdept@me.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patches]
* kernel: bump 5.4 to 5.4.87John Audia2021-01-087-14/+14
| | | | | | | | | | | | | | | | | | All modification by update_kernel.sh. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Compile-tested [*]: ath79/{generic,tiny}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64. Run-tested [*]: ramips/mt7621 (DIR-878 A1, R6800, RT-AC57U), octeon (EdgeRouter Lite). Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* realtek: add support for ZyXEL GS1900-8HP v1 and v2Stijn Segers2021-01-084-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8HP is an 8 port gigabit switch with PoE+ support. There are two versions on the market (v1 & v2) which share similar specs (same flash size and flash layout, same RAM size, same PoE+ power envelope) but have a different case and board layout that they each share with other GS1900 siblings. The v1 seems to share its PCB and case with non-PoE GS1900-8; as such, adding support for the GS1900-8 would probably be trivial. The v2 seems to share its casing and platform with its already supported bigger brother, the GS1900-10HP - its board looks the same, except for two holes where the GS1900-10 has its SFP ports. Like their 10 port sibling, both devices have a dual firmware layout. Both GS1900-8HP boards have the same 70W PoE+ power budget. In order to manipulate the PoE+, one needs the rtl83xx-poe package [1]. After careful consideration it was decided to go with separate images for each version. Specifications (v1) ------------------- * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8HE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * PoE+: Broadcom BCM59111KMLG (IEEE 802.3at-2009 compliant, 2x) * UART: 1 serial header with populated standard pin connector on the left side of the PCB, towards the bottom. Pins are labeled: + VCC (3.3V) + TX + RX + GND Specifications (v2) ------------------- * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Samsung K4B1G0846G 128 MiB DDR3 SDRAM * Ethernet: 8x 10/100/1000 Mbit * PoE+: Broadcom BCM59121B0KMLG (IEEE 802.3at-2009 compliant) * UART: 1 angled serial header with populated standard pin connector accessible from outside through the ventilation slits on the side. Pins from top to bottom are clearly marked on the PCB: + VCC (3.3V) + TX + RX + GND Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and apply both to the GS1900-8HP v1 and v2 as well. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8hp-v{1,2}-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp//tmp/openwrt-realtek-generic-zyxel_gs1900-8hp-v{1,2}-squashfs-sysupgrade.bin Signed-off-by: Stijn Segers <foss@volatilesystems.org> [merge PoE case, keep device definitions separate, change all those hashes in the commit message to something else so they don't get removed when changing the commit ...] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* realtek: remove model prefix from LED label for ZyXEL GS1900Adrian Schmutzler2021-01-081-1/+1
| | | | | | This is used as fixed status LED, so no migration is needed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* realtek: introduce shared DTSI for GS1900 seriesStijn Segers2021-01-082-208/+153
| | | | | | | | | | | The ZyXEL GS1900-8HP v1, v2 and GS1900-10HP are all built on a similar Realtek RTL8380M platform. Create a common DTSI in preparation for GS1900-8HP support, and switch to the macros defined in rtl838x.dtsi. Signed-off-by: Stijn Segers <foss@volatilesystems.org> [drop redundant includes, use &mdio directly, do not replace SFP ports] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 22:42:58 +0000