aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: move reference clock node to SoC dtsiShiji Yang2022-11-0925-186/+24
| | | | | | | AR7161, AR724x, AR9132 and QCA95xx only support fixed frequency external crystal oscillator, so move reference clock node to SoC dtsi files. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* Revert "build: fix for sourcing target image config a when target is being ↵Christian Marangi2022-11-091-1/+0
| | | | | | | | | | replaced" This reverts commit ce1346a8fc0ce9640a4ecbc37bc1686a25c1165d. Seems to cause buildbot compilation to fail and require more testing. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* build: fix for sourcing target image config a when target is being replacedPrasun Maiti2022-11-091-0/+1
| | | | | | | Sourcing of image/Config.in will not happen When a target is installed from target/linux/feeds/ Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com>
* mac80211: remove old legacy legacy driversFelix Fietkau2022-11-0916-922/+19
| | | | | | | | | | | Get rid of drivers that are either limited to 802.11b/g or don't even support cfg80211/mac80211. Most of these are either limited to boards that we don't even support anymore because of firmware size, or were only used for custom hacks by a really small number of users in the past. Let's get rid of those to reduce the maintenance effort and the number of useless packages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: filogic: enable maxlinear PHY support, refresh configFelix Fietkau2022-11-091-0/+1
| | | | | | Needed for the 7986 RFB1 board Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: filogic: fix mt7986a ethernet devicetree entriesFelix Fietkau2022-11-091-12/+24
| | | | | | Add all ports, rename DSA ports to start at lan1 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: drop the use of device tree overlays on mt7986a-rfb boardFelix Fietkau2022-11-094-91/+92
| | | | | | | The boot loader does not support it. Instead make NAND the default image for this board Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/mkits.sh: fix portability issueFelix Fietkau2022-11-091-2/+2
| | | | | | | BSD wc can output more whitespaces, which breaks the cut usage. Replace the cut invocation with awk, which is more portable. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: add firmware package for mt7916Andrew Powers-Holmes2022-11-091-0/+16
| | | | | | | | | | Add kernel package 'mt7916-firmware' with firmware files for MT7916E devices. These share the same driver as the MT7915 chipset, but use their own firmware. Tested using a pair of AsiaRF AW7916-NPD cards. Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
* kernel: add mediatek soc ethernet performance improvementsFelix Fietkau2022-11-0914-8/+1422
| | | | | | | | - implement multiqueue via qdma hardware shaper to deal with ports with different speeds - implement hardware DSA untagging - add NETIF_F_ALL_TSO to reduce unnecessary segmentation Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: subsys: add tags to upstreamed patchesNick Hainke2022-11-0932-0/+0
| | | | | | Some patches were already upstreamed. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: rt2x00: add tags to upstreamed patchesNick Hainke2022-11-0916-0/+0
| | | | | | Some patches are already upstreamed. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: brcm: add tag to upstreamed patchNick Hainke2022-11-091-0/+0
| | | | | | Add tag to upstreamed patch. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: ath9k: add tag to upstreamed patchNick Hainke2022-11-091-0/+0
| | | | | | Add tag to upstreamed patch. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: ath10k: add tags for upstreamed patchesNick Hainke2022-11-096-0/+0
| | | | | | Add tags to already upstreamed patches. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq806x: kernel ramoops storage for C2600/AD7200Edward Matijevic2022-11-092-2/+11
| | | | | | | | | Define the kernel crash log storage ramoops/pstore feature for C2600/AD7200 and add kmod-ramoops to default. Tested with C2600 only. Signed-off-by: Edward Matijevic <motolav@gmail.com>
* ramips: define loadaddr for U6 Lite DTBDavid Bauer2022-11-081-0/+1
| | | | | | | | | | | | | The Ubiquiti UniFi 6 Lite does not correctly align the FDT by always setting fdt_high to 0xffffffff when invoking the bootubnt command. Work around this issue by loading the DTB to a valid,aligned address, so the bootloader does not have to relocate the FDT automatically. Note: The device does read the kernel before invoking bootm on the FIT image to 0x86000000. Signed-off-by: David Bauer <mail@david-bauer.net>
* mkits: support definition of DTB loadaddrDavid Bauer2022-11-083-1/+10
| | | | | | | Support defining a per-device loadaddress for the DTB. This is required for devices which to not align the DTB from the bootloader correctly. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: improve description of NTFS kernel packagesRafał Miłecki2022-11-081-4/+8
| | | | | | This helps choosing the right NTFS driver from two available options. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport support for "linux,rootfs" in DTRafał Miłecki2022-11-0814-94/+170
| | | | | | | | | This DT property allows marking flash partition that Linux should use as a root device. It's useful for devices that don't use U-Boot and cmdline parser for partitioning. It may be used with "fixed-partitions" or some dynamic partitioning based on flash content. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: split out mtd hack for CONFIG_FIT_PARTITION + rootfsRafał Miłecki2022-11-083-4/+20
| | | | | | | | This is some hack on top of our old hack. Use separated patch for it so it's easier to understand and actually possible to describe. We should ideally get rid of this (and we actually did with kernels 5.15+). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: gl-mt1300: downclock SPI to 50MHzMichael Lyle2022-11-071-2/+1
| | | | | | | | | | | | | | | The SPI max frequency was set to 80MHz, considerably higher than the vendor clocks it in their firmware (10MHz). Multiple users reported jffs2 corruption/instability in GitHub issue #10461. My unit has a W25Q256; datasheet specifies maximum SPI frequency for read command of 50MHz. Thanks to @DragonBlueP for suggesting to eliminate m25p,fast-read; and @MPannen1979 for identifying the problem. Fixes: #10461 Signed-off-by: Michael Lyle <mlyle@lyle.org>
* ramips: fix TP-Link RE200 v3/v4 LEDsSungbo Eo2022-11-075-11/+54
| | | | | | | | | | | | Set power LED to gpio 43 instead of 44 for v3 and v4. Set red wifi LED to gpio 40 (was assigned to `red:wifi5g`). Tested by the author of the initial v3 and v4 commit. Reported-by: Richard Fröhning <misanthropos@gmx.de> Tested-by: Richard Fröhning <misanthropos@gmx.de> Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* dnsmasq: remove backported CVE patchKevin Darbyshire-Bryant2022-11-061-179/+0
| | | | | | Patch no longer applies/required since bump to v2.87 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: Support nftables nftsetsKevin Darbyshire-Bryant2022-11-062-11/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add build option for nftables sets. By default disable iptables ipset support. By default enable nftable nftset support since this is what fw4 uses. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> dnsmasq: nftset: serve from ipset config Use existing ipset configs as source for nftsets to be compatible with existing configs. As the OS can either have iptables XOR nftables support, it's fine to provide both to dnsmasq. dnsmasq will silently fail for the present one. Depending on the dnsmasq compile time options, the ipsets or nftsets option will not be added to the dnsmasq config file. dnsmasq will try to add the IP addresses to all sets, regardless of the IP version defined for the set. Adding an IPv6 to an IPv4 set and vice versa will silently fail. Signed-off-by: Mathias Kresin <dev@kresin.me> dnsmasq: support populating nftsets in addition to ipsets Tell dnsmasq to populate nftsets instead of ipsets, if firewall4 is present in the system. Keep the same configuration syntax in /etc/config/dhcp, for compatibility purposes. Huge thanks to Jo-Philipp Wich for basically writing the function. Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> dnsmasq: obtain nftset ip family from nft Unfortunately dnsmasq nft is noisy if an attempt to add a mismatched ip address family to an nft set is made. Heuristic to guess which ip family a nft set might belong by inferring from the set name. In order of preference: If setname ends with standalone '4' or '6' use that, else if setname has '4' or '6' delimited by '-' or '_' use that (eg foo-4-bar) else If setname begins with '4' or '6' standalone use that. By standalone I mean not as part of a larger number eg. 24 If the above fails then use the existing nft set query mechanism and if that fails, well you're stuffed! With-thanks-to: Jo-Philipp Wich <jo@mein.io> who improved my regexp knowledge. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> dnsmasq: specify firewall table for nftset Permit ipsets to specify an nftables table for the set. New config parameter is 'table'. If not specified the default of 'fw4' is used. config ipset list name 'BK_4,BK_6' option table 'dscpclassify' option table_family 'ip' option family '4' list domain 'ms-acdc.office.com' list domain 'windowsupdate.com' list domain 'update.microsoft.com' list domain 'graph.microsoft.com' list domain '1drv.ms' list domain '1drv.com' The table family can also be specified, usually 'ip' or 'ip6' else the default 'inet' capable of both ipv4 & ipv6 is used. If the table family is not specified then finally a family option is available to specify either '4' or '6' for ipv4 or ipv6 respectively. This is all in addition to the existing heuristic that will look in the nftset name for an ip family clue, or in total desperation, query the value from the nftset itself. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: add uci-defaults script for ipset migrationMathias Kresin2022-11-062-0/+33
| | | | | | | | When running sysupgrade from an existing configuration, move existing ipset definitions to a dedicated config section. Later on, it will allow to serve ipset as well as nftable sets from the same configuration. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dnsmasq: bump to 2.87Kevin Darbyshire-Bryant2022-11-063-10/+10
| | | | | | Bump dnsmasq to 2.87 & refresh patches Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* sdk: use git-src-full to allow Git versioningKuan-Yi Li2022-11-061-2/+2
| | | | | | | | | | | | | $(AUTORELEASE) uses Git log to determine releases and package timestamps. Base feed is shallow cloned by default in generated SDK, resulting in an incomplete Git log and therefore different local package versions than offered upstream. This patch complements commit 7fae1e5677 by setting the base feed to use `src-git-full` to solve that. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* ath79: expand rootfs for DIR-825-B1 with unused spaceAlan Luck2022-11-061-6/+21
| | | | | | | | | | Expand currently unused flash space to roofs for DIR-825-B1 by using the same flash space as the old ar71xx big image without moving the caldata. With some testing this partition is use by the OEM firmware but if changed is regenerated which allows reverting to OEM firmware Signed-off-by: Alan Luck <luckyhome2008@gmail.com>
* ath79: add support to TrendNet TEW-673GRUKorey Caro2022-11-064-4/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the TrendNet TEW-673GRU to ath79. This device was supported in 19.07.9 but was deprecated with ar71xx. This is mostly a copy of D-Link DIR-825 B1. Updates have been completed to enable factory.bin and sysupgrade.bin both. Code improvements to DTS file and makefile. Architecture | MIPS Vendor | Qualcomm Atheros bootloader | U-Boot System-On-Chip | AR7161 rev 2 (MIPS 24Kc V7.4) CPU/Speed | 24Kc V7.4 680 MHz Flash-Chip | Macronix MX25L6405D Flash size | 8192 KiB RAM Chip: | ProMOS V58C2256164SCI5 × 2 RAM size | 64 MiB Wireless | 2 x Atheros AR922X 2.4GHz/5.0GHz 802.11abgn Ethernet | RealTek RTL8366S Gigabit w/ port based vlan support USB | Yes 2 x 2.0 Initial Flashing Process: 1) Download 22.03 tew-673gru factory bin 2) Flash 22.03 using TrendNet GUI OpenWRT Upgrade Process 3) Download 22.03 tew-673gru sysupgrade.bin 4) Flash 22.03 using OpenWRT GUI Signed-off-by: Korey Caro <korey.caro@gmail.com>
* CI: packages.yml: Fix usage of pre-build toolsHauke Mehrtens2022-11-061-0/+2
| | | | | | | | | | Activate CONFIG_AUTOREMOVE to match the settings used to build the pre-build tools. This has to match the pre-build tools to not rebuild them. This prevents the tools being rebuild in packages.yml. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: add support for TP-Link MR600 V2(EU)Linos Giannopoulos2022-11-054-0/+235
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MR600 V2(EU) is an LTE router that also supports 4G+ band aggregation etc. and can reportedly achieve higher bandwidth with it. - Specifications: * SoC: Mediatek MT7621DAT 880MHz * RAM: 128MB DDR3 * Flash: 16MB SPI NOR flash (GD25Q128C) * LTE Modem: Qualcomm MDM9240 * WiFi 5GHz: Mediatek MT7613BEN * WiFi 2.4GHz: Mediatek MT7603EN * Ethernet: MT7530, 4x 1000Base-T. * UART: Serial console (115200 8n1), J1(GND:3) * Buttons: Reset, WPS. * LED: Power, WAN, LTE, WiFi 2GHz and 5GHz, LAN, Signal1, Signal2, Signal3 - MAC Addresses: OEM firmware configuration: 54:af:97:xx:xx:7b : 2.4G 54:af:97:xx:xx:7a : 5G 54:af:97:xx:xx:7c : LTE 54:af:97:xx:xx:7b : LAN (label) 54:af:97:xx:xx:7c : WAN - Installation: 1. Download the OpenWrt initramfs-image. Place it into a TFTP server root directory and rename it to openwrt.img Configure the TFTP server to listen at 192.168.0.5/24. 3. Connect to the serial console. Attach power and interrupt the boot procedure when prompted (type `tpl`). Credentials are admin / 1234 4. Configure U-Boot for booting OpenWrt from ram $ tftpboot $ bootm 5. Transfer the OpenWrt sysupgrade image to the device. - LTE: In order to setup the wwan0 interface: 1. Add a `qmi` proto interface under `/etc/config/network`, e.g.: ``` config interface 'wwan0' option device '/dev/cdc-wdm0' option proto 'qmi' option pincode 'XXXX' option apn 'your_isp_apn' ``` 2. Add `wwan0` interface to the `wan` firewall zone 3. `/etc/init.d/network restart` Signed-off-by: Linos Giannopoulos <linosgian00@gmail.com>
* ramips: add support for SIM SIMAX1800T and Haier HAR-20S2U1Shiji Yang2022-11-058-4/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIM AX18T and Haier HAR-20S2U1 Wi-Fi6 AX1800 routers are designed based on Tenbay WR1800K. They have the same hardware circuits and u-boot. SIM AX18T has three carrier customized models: SIMAX1800M (China Mobile), SIMAX1800T (China Telecom) and SIMAX1800U (China Unicom). All of these models run the same firmware. Specifications: SOC: MT7621 + MT7905 + MT7975 ROM: 128 MiB RAM: 256 MiB LED: status *3 R/G/B Button: reset *1 + wps/mesh *1 Ethernet: lan *3 + wan *1 (10/100/1000Mbps) TTL Baudrate: 115200 TFTP Server: 192.168.1.254 TFTP IP: 192.168.1.28 or 192.168.1.160 (when envs is broken) MAC Address: use address source label 30:xx:xx:xx:xx:62 wan lan 30:xx:xx:xx:xx:65 factory.0x8004 wan 30:xx:xx:xx:xx:62 factory.0x8004 -3 wlan2g 30:xx:xx:xx:xx:64 factory.0x0004 wlan5g 32:xx:xx:xx:xx:64 factory.0x0004 set 7th bit TFTP Installation (initramfs image only & recommend): 1. Set local tftp server IP: 192.168.1.254 and NetMask: 255.255.255.0 2. Rename initramfs-kernel.bin to "factory.bin" and put it in the root directory of the tftp server. (tftpd64 is a good choice for Windows) 3. Start the TFTP server, plug in the power supply, and wait for the system to boot. 4. Backup "firmware" partition and rename it to "firmware.bin", we need it to back to stock firmware. 5. Use "fw_printenv" command to list envs. If "firmware_select=2" is observed then set u-boot enviroment: /# fw_setenv firmware_select 1 6. Apply sysupgrade.bin in OpenWrt LuCI. Web UI Installation: 1. Apply update by uploading initramfs-factory.bin to the web UI. 2. Use "fw_printenv" command to list envs. If "firmware_select=2" is observed then set u-boot enviroment: /# fw_setenv firmware_select 1 3. Apply squashfs-sysupgrade.bin in OpenWrt LuCI. Recovery to stock firmware: a. Upload "firmware.bin" to OpenWrt /tmp, then execute: /# mtd -r write /tmp/firmware.bin firmware b. We can also write factory image "UploadBrush-bin.img" to firmware partition to recovery. Upload image file to /tmp, then execute: /# mtd erase firmware /# mtd -r write /tmp/UploadBrush-bin.img firmware How to extract stock firmware image: Download stock firmware, then use openssl: openssl aes-256-cbc -d -salt -in [Downloaded_Firmware] \ -out "firmware.tar.tgz" -k QiLunSmartWL Signed-off-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ltq-tapi: Fix compile with kernel 5.15Hauke Mehrtens2022-11-051-0/+14
| | | | | | | | | | Do not use find_vpid(), but get_task_pid() to get the pid from pThrCntrl->tid. This is now a ponter to struct task_struct instead of an integer. This fixes the build of ltq-tapi with lantiq/xway. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-ifxos: Fix compile with ltq-tapiHauke Mehrtens2022-11-051-0/+11
| | | | | | | Do not include asm/irq.h directly, but include linux/interrupt.h instead. This fixes the build of ltq-tapi with lantiq/xway. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* busybox: awk: fix use after free (CVE-2022-30065)Hauke Mehrtens2022-11-051-0/+42
| | | | | | | | | | | This backports a commit which fixes a use after free bug in awk. CVE-2022-30065 description: A use-after-free in Busybox 1.35-x's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the copyvar function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: Backport DHCPv6 server fix (CVE-2022-0934)Hauke Mehrtens2022-11-051-0/+179
| | | | | | | | | | | This backports a commit from upstream dnsmasq to fix CVE-2022-0934. CVE-2022-0934 description: A single-byte, non-arbitrary write/use-after-free flaw was found in dnsmasq. This flaw allows an attacker who sends a crafted packet processed by dnsmasq, potentially causing a denial of service. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: add support for Zbtlink ZBT-WG1602-V04Alexander Horner2022-11-054-0/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description heavily based on commit 7e89421a7c3855d66a20350a5bf9ca4cc7a2caf9 by Sergey Ryazanov <ryazanov.s.a@gmail.com> Details I cannot confirm have been removed Completed with great help from \x on IRC. Thanks, \x! Zbtlink ZBT-WG1602-V04 is a Wi-Fi router intendend for use with WWAN (UMTS/LTE/3G/4G) modems. The router board offers a couple of miniPCIe slots with USB and SIM only and another one which is a pure miniPCIe slot as well as five Gigabit Ethernet ports (4xLAN + WAN). Specification: * SoC: MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB * Eth: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * WLAN 2GHz: MT7603E (.11bgn, MIMO 2x2) * WLAN 5GHz: MT7662E (.11nac, MIMO 2x2) * WLAN Ants: detachable x2, shared by 2GHz & 5GHz radios * miniPCIe: 2x slots with USB&SIM + 1x slot with regular PCIe bus * WWAN Ants: detachable x4 * External storage: microSD (SDXC) slot * USB: 3.0 Type-A port * LED: 11 (5 per Eth phy, 3 SoC controlled, 2 WLAN 2/5 controlled, 1 power indicator) * Button: 1 (reset) * UART: console (115200 baud) * Power: DC jack (12 V / 2.5 A) Additional HW information: * SoC USB port 1 is shared by internal miniPCIe slot and external Type-A USB port, USB D+/D- lines are toggled between ports using a GPIO controlled DPDT switch. Installation: The kernel image can be installed directly onto the device via a browser to 192.168.1.1 using the built in firmware recovery Web UI available. It can be accessed by pushing the reset button in, applying power and holding the reset button for approximately 10 seconds. When the kernel image has been flashed, you can access LuCI and upload the sysupgrade as normal. Signed-off-by: Alexander Horner <ahorner@programmer.net>
* ramips: add support for Youku X2Shiji Yang2022-11-054-1/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: MT7620AN + MT7612EN RAM: 128 MiB DDR2 Flash: 16 MiB (Winbond W25Q28FVFG) WLAN: 2.4G + 5G LAN: LAN ports *2 WAN: WAN port *1 USB: USB2.0 *1 SD Card: MicroSD *1 Buttons: Reset *1 LEDs: ethernet *3, system, usb, wlan2g, wlan5g MAC Address: use address source label 54:36:9b:xx:xx:ac lan lan 54:36:9b:xx:xx:ac factory.0x0028 wan 54:36:9b:xx:xx:ad factory.0x002e wlan2g 54:36:9b:xx:xx:ae factory.0x0004 wlan5g 54:36:9b:xx:xx:af factory.0x8004 Installation: 1. Apply initramfs-kernel.bin in stock firmware Web UI. 2. Install sysupgrade.bin on OpenWrt and do not retain any configuration. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: improve compatibility for Youku YK-L2 and YK-L1 seriesShiji Yang2022-11-054-2/+10
| | | | | | | | | | | | | | Add UIMAGE_NAME and UIMAGE_MAGIC to allow users to directly install initramfs-kernel.bin from the stock firmware Web UI. At the same time, this change makes it possible to boot OpenWrt with the official u-boot. Notice: Since the stock firmware is based on OpenWrt and the configuration will be retained by default during the upgrade process, so we must use initramfs-kernel.bin to do a initial installation. After the system restarts, install sysupgrade.bin and do not retain any configuration. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* uboot-layerscape: adjust LS1012A-IOT config and envPawel Dembicki2022-11-052-1/+46
| | | | | | | | | | | | | | | In a254279a6c30 LS1012A-IOT kernel image was switched to FIT. But u-boot config is lack of FIT and ext4 support. This patch enables it. It also fix envs, because for some reason this board need to use "loadaddr" variable in brackets. Fixes: #9894 Fixes: a254279a6c30 ("layerscape: Change to combined rootfs on sd images") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* valgrind: update to 3.20.0Nick Hainke2022-11-051-2/+2
| | | | | | | Release Notes: https://valgrind.org/docs/manual/dist.news.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: further cleanup of xfrm[4|6]_mode*Martin Schiller2022-11-053-14/+0
| | | | | | | | | In my commit da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") I missed a few default config options and description entries. Those should be gone as well. Fixes: da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* realtek: fix typo in debug messageLuiz Angelo Daros de Luca2022-11-051-2/+2
| | | | | | vid_end was mentioned twice. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* kernel: bump 5.15 to 5.15.77John Audia2022-11-0516-56/+55
| | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch lantiq/patches-5.15/0028-NET-lantiq-various-etop-fixes.patch All other patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.153John Audia2022-11-057-29/+28
| | | | | | | | | | Manually rebased: bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* tools/fakeroot: update to 1.30.1Nick Hainke2022-11-052-5/+5
| | | | | | | | | | Release Notes: https://tracker.debian.org/news/1381350/accepted-fakeroot-1301-1-source-into-unstable/ Refresh patches: - 600-macOS.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* openssl: bump to 1.1.1sJohn Audia2022-11-0514-168/+2527
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes between 1.1.1r and 1.1.1s [1 Nov 2022] *) Fixed a regression introduced in 1.1.1r version not refreshing the certificate data to be signed before signing the certificate. [Gibeom Gwon] Changes between 1.1.1q and 1.1.1r [11 Oct 2022] *) Fixed the linux-mips64 Configure target which was missing the SIXTY_FOUR_BIT bn_ops flag. This was causing heap corruption on that platform. [Adam Joseph] *) Fixed a strict aliasing problem in bn_nist. Clang-14 optimisation was causing incorrect results in some cases as a result. [Paul Dale] *) Fixed SSL_pending() and SSL_has_pending() with DTLS which were failing to report correct results in some cases [Matt Caswell] *) Fixed a regression introduced in 1.1.1o for re-signing certificates with different key sizes [Todd Short] *) Added the loongarch64 target [Shi Pujin] *) Fixed a DRBG seed propagation thread safety issue [Bernd Edlinger] *) Fixed a memory leak in tls13_generate_secret [Bernd Edlinger] *) Fixed reported performance degradation on aarch64. Restored the implementation prior to commit 2621751 ("aes/asm/aesv8-armx.pl: avoid 32-bit lane assignment in CTR mode") for 64bit targets only, since it is reportedly 2-17% slower and the silicon errata only affects 32bit targets. The new algorithm is still used for 32 bit targets. [Bernd Edlinger] *) Added a missing header for memcmp that caused compilation failure on some platforms [Gregor Jasny] Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
* elfutils: update to 1.88Nick Hainke2022-11-054-8/+8
| | | | | | | | | | | | Release Notes: https://sourceware.org/pipermail/elfutils-devel/2022q4/005561.html Refresh patches: - 003-libintl-compatibility.patch - 100-musl-compat.patch - 101-no-fts.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/elfutils: update to 1.88Nick Hainke2022-11-051-2/+2
| | | | | | | Release Notes: https://sourceware.org/pipermail/elfutils-devel/2022q4/005561.html Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 20:22:21 +0000